Preparation of a low-cost fingerprint powder that harnesses white light to emit long-lived phosphorescence

An inexpensive, commercially available doped strontium aluminate phosphor with long-lived afterglow has been prepared and assessed in the role of a luminescent fingerprint dusting powder. Blue, green, and aqua phosphorescence persisting for ca. 30 s was obtainable from treated fingermarks after charging the powders with the white light (400–700 nm) setting of a forensic light source. Imaging the phosphorescent afterglow enabled the elimination of background emissions encountered during latent fingermark examination. This was demonstrated by visualising fingermarks on substrates that possess inbuilt fluorescent security features and highly patterned substrate backgrounds, without any need for bespoke scientific equipment.     

Fingermark detection on non-porous and semi-porous surfaces using NaYF4:Er,Yb up-converter particles

This article describes the first use of an anti-Stokes material, or up-converter, for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes materials can absorb long-wavelength light and emit light at a shorter wavelength. This property is unusual in both natural and artificial materials and so fingermark detection techniques based on anti-Stokes luminescence are potentially sensitive and selective. Latent fingermarks on luminescent and non-luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with sodium yttrium tetrafluoride doped with erbium and ytterbium (NaYF(4):Er,Yb) by dry powder, wet powder, and cyanoacrylate staining techniques. This study illustrates the potential of up-converter phosphors for the detection of latent fingermarks.     

Fluorescent TiO2 powders prepared using a new perylene diimide dye: applications in latent fingermark detection

A new, highly fluorescent dye was synthesised using oleylamine combined with a perylene dianhydride compound. The new dye was characterised by 1H NMR, UV-vis spectroscopy and fluorescence spectroscopy as well as quantum yield. The dye was absorbed onto titanium dioxide nanoparticles for use as a fingerprint detection powder. The new fluorescent powder was applied to latent fingermarks deposited onto different non-porous surfaces and compared with commercial fluorescent powders. The powder exhibits strong fluorescence at 650-700 nm under excitation at 505 nm. On glass surfaces, the new powder gave images showing tertiary-level detail of the fingermark ridges with almost no background development. Compared with current magnetic fluorescent powders, the new powder was slightly weaker in fluorescence intensity but produced significantly less background development, resulting in good contrast between the fingermark and the substrate.     

Enhanced Visualization of Latent Fingermarks on Rough Aluminum Surfaces Using Sequential Au and Zn/ZnS/ZnO Depositions

Detection and visualization of fingermarks on rough and diffuse surfaces is a relatively challenging task. We succeeded in developing latent fingermarks on scratched and rough aluminum surfaces by sequential deposition of a thin layer of gold followed by one of zinc or zinc‐based compounds on the fingermarks. The best image enhancement was achieved with sequential Au and ZnS depositions. Using this combination, we could enhance the visualization of latent fingermarks aged over 65 days in normal conditions. The optical reflectance from the fingermarks with the deposited layers of metal/dielectric is analyzed as a stratified medium. Significant contrast in the reflectance from the regions of the ridges and the valleys of the fingermark would enhance the visualization. Our results show that the Au and ZnS bi‐layer combination can have a large reflection contrast and improved fingermark visualization at wavelengths corresponding to the green light for specific thickness of ZnS.     

Fingermark detection on non-porous and semi-porous surfaces using YVO4:Er,Yb luminescent upconverting particles

This article describes the use of an anti-Stokes luminescent material (upconverter), yttrium vanadate doped with ytterbium and erbium (YVO(4):Er,Yb), for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes luminescent materials emit light at shorter wavelengths than the excitation wavelength. This property is unusual in both natural and artificial materials commonly found as exhibits in forensic science casework. As a result, fingermark detection techniques based on anti-Stokes luminescence are potentially extremely sensitive and selective. Latent fingermarks on non-luminescent and inherently luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with YVO(4):Er,Yb by dry powder and wet powder techniques. The effectiveness of YVO(4):Er,Yb for fingermark detection was compared with that of cyanoacrylate fuming and of sodium yttrium tetrafluoride doped with ytterbium and erbium (NaYF(4):Er,Yb). The results illustrate some benefit of luminescent up-converting phosphors over traditional luminescence techniques for the detection of latent fingermarks.     

The detection and enhancement of latent fingermarks using infrared chemical imaging

The use of a new technique, Fourier transform infrared (FTIR) chemical imaging, has been demonstrated for the enhancement of latent fingermarks on a number of surfaces. Images of untreated fingermarks on glass backgrounds with excellent ridge detail were acquired using infrared chemical imaging. High quality fingermarks on glass backgrounds were also developed using ethyl cyanoacrylate (super glue) fuming and subsequent infrared chemical imaging. This new method allows the collection of images from backgrounds that traditionally pose problems for current fingermark detection methods. The background may, for example, be highly colored, have a complex pattern, or possess other pattern or image characteristics that make it difficult to separate fingermark ridges using traditional optical or luminescent visualization. One background that has proven to be a challenging surface for the development of latent fingermarks is the Australian polymer banknote. To demonstrate the power and applicability of infrared chemical imaging, fingermarks fumed with ethyl cyanoacrylate were successfully imaged from Australian polymer banknotes.     

Styryl dye coated metal oxide powders for the detection of latent fingermarks on non-porous surfaces

Conventional fingermark powders rely on contrast induced by absorption/reflection (e.g. black powder) or luminescence in the visible region (e.g. Blitz Green(?)). In most cases, these powders provide sufficient contrast; however, in some circumstances surface characteristics can interfere with the visualisation of powdered fingermarks. Visualisation in the near infra-red (NIR) region, however, has been shown to eliminate interferences commonly encountered in the visible region. In this study, a mixture of rhodamine 6G and the NIR laser dye styryl 11 (STaR 11) was coated onto an aluminium oxide nanopowder and then mixed with silver magnetic powder to develop and visualise fingermarks in the NIR. When compared to Blitz Green(?), it was determined that the STaR 11 magnetic powder was better suited for marks deposited on textured surfaces and for older marks, whereas Blitz Green(?) performed better on smooth glossy surfaces. The ability of the STaR 11 mixed dye formulation to be visualised in both the visible and NIR regions also provides a significant advantage over conventional luminescent fingermark powders.     

Development of Latent Fingermarks from Rocks and Stones

Since the beginning of recorded history, stones have been used in the commission of crimes due to their widespread availability. Stones can be used as a lethal weapon that sometimes might be the only evidence in a serious case. The common perception, even in professional fingermark circles, is that stones do not yield identifiable latent fingermarks. The authors of this research paper examined the feasibility of developing fingermarks from seven types of stones using three latent fingermark techniques: magnetic powder, cyanoacrylate fuming, and ninhydrin. The paper will demonstrate that by classifying stones and rocks according to their natural properties (porosity, permeability, and the nature of surface area), even application of the simplest development techniques can produce good results. In conclusion, chert and limestone yielded the most qualitative and quantitative results using magnetic powder. The time factor is also important in recovering latent fingermarks on stones and rocks.     

Novel O‐propyl,S‐propyl,and N‐propyl substituted 1,4‐naphthoquinones and 1,4‐anthraquinones as potential fingermark development reagents for porous surfaces

Lawsone is a 2‐substituted‐1,4‐naphthoquinone derivative, which has been proposed as an alternative to the reagents currently used for fingermark detection on porous surfaces. 2‐substituted‐anthraquinones, which contain an additional conjugated benzene ring, have a similar chemical structure to that of lawsone. In this study, a new series of 2‐substituted‐1,4‐naphthoquinones and 2‐substituted‐1,4‐anthraquinones were synthesized and completely characterized by¹H NMR,¹³C NMR, IR, and HPLC‐TOF/MS analyses. All newly synthesized 2‐substituted‐1,4‐quinones were investigated for their ability to develop latent fingermarks on porous surfaces, and this ability was compared with that of lawsone. Each fingermark developed was graded using an established method; thus, quantitative data were attributed to each fingermark. It has been demonstrated that the 1,4 ‐ quinones react with amino acids present in latent fingermarks on selected paper surfaces to produce faint yellow‐orange impressions, which exhibit strong photoluminescence when illuminated with a forensic light source at 440 nm and observed through a red filter. None of the compounds caused background darkening. The results obtained were generally similar to those of lawsone, however, 8‐dibromo‐2‐(propylamino)naphthalene‐1,4‐dione and 5,8‐dibromo‐2‐(propylthio)naphthalene‐1,4‐dione yielded better results for copier paper and colored (blue) copier paper used in this analysis. To the best of our knowledge, this is the first study to examine the role of 1,4‐anthraquinone derivatives as potential fingermark development reagents. The results indicate that 1,4‐quinones have a potential to be used as reagents for enhancement of latent fingermarks.     

Quantitative evaluation of latent fingermarks with novel enhancement and illumination

A variety of suspended silica and metal nanoparticles have been used over the last 20 years to enhance latent fingermarks. This study quantitatively evaluates enhancement of natural and sebum-enriched fingermarks from three adult subjects acquired with a consistent applied force on glass with a fingermark press using suspended commercially available polystyrene (PS) particles. Images of the enhanced fingermarks acquired with total internal reflection (TIR), or standard overhead white light (WL), illumination are compared with fingermarks enhanced with conventional methods including cyanoacrylate fuming. The different enhancement and illumination methods are quantified based on the brightness and contrast of the fingermark images, as well as the number of minutiae that can be identified and matched to those on an inked manually acquired “template” fingermark using automatic fingerprint identification system (AFIS) software. Enhanced fingermarks acquired with the press are shown to be more consistent than manually acquired fingermarks based on these metrics. The results demonstrate that TIR illumination from a large-area illuminator built in house gives enhanced fingermark images with more matched minutiae and contrast superior to that for WL illumination for all types of enhancement. “Wet-powdering” with PS particles gives fingermark images that are for the most part comparable in terms of the number of matched minutiae to fingermarks enhanced with more conventional methods, suggesting that this novel enhancement method has a performance comparable to conventional enhancement methods. Interestingly, the age of the fingermark appears to have almost no effect on this new type of enhancement; sebum-enriched fingermarks ranging in age from 12 h to 435 days appear to have statistically identical numbers of matched minutiae.     

The Recovery of Latent Fingermarks from Evidence Exposed to Ionizing Radiation*

Abstract: Continual reports of illicit trafficking incidents involving radioactive materials have prompted authorities to consider the likelihood of forensic evidence being exposed to radiation. In this study, we investigated the ability to recover latent fingermark evidence from a variety of substrates that were exposed to ionizing radiation. Fingermarks deposited on common surfaces, including aluminum, glass, office paper, and plastic, were exposed to doses ranging from 1 to 1000 kGy, in an effort to simulate realistic situations where evidence is exposed to significant doses of radiation from sources used in a criminal act. The fingermarks were processed using routine fingermark detection techniques. With the exception of glass and aluminum substrates, radiolysis had a considerable effect on the quality of the developed fingermarks. The damage to ridge characteristics can, in part, be attributed to chemical interactions between the substrate and the components of the fingermark secretions that react with the detection reagents.     

Studies into exfoliation and coating of Egyptian blue in methanol for application to the detection of latent fingermarks

We have recently demonstrated that coated exfoliated Egyptian blue powder is effective for detecting latent fingermarks on a range of highly-patterned non-porous and semi-porous surfaces. In this extension of that work, we present our studies into an alternative approach to prepare exfoliated Egyptian blue coated with cetrimonium bromide and Tween® 20 using a simpler technique. The quality of the latent fingermarks developed with these exfoliated powders and the commercial powder were compared in a comprehensive study. Depletion series of natural fingermarks from a wide range of donors (12 males and females) deposited on non-porous (glass slides) and semi-porous (Australian banknotes) surfaces were used in this study. Enhancement in the performance of the coated exfoliated particles compared to the commercial powder was observed, particularly in the case of aged fingermarks and polymer banknotes as challenging substrates.     

Exposing latent fingermarks on problematic metal surfaces using time of flight secondary ion mass spectroscopy

Fingermarks are a key form of physical evidence for identifying persons of interest and linking them to the scene of a crime. Visualising latent (hidden) fingermarks can be difficult and the correct choice of techniques is essential to develop and preserve any fingermarks or other (e.g. DNA) evidence that might be present. Metal surfaces (stainless steel in particular) have proven to be challenging substrates from which to reliably obtain fingermarks. This is a great cause for concern among police forces around the globe as many of the firearms, knives and other metal weapons used in violent crime are potentially valuable sources of fingermark evidence. In this study, a highly sensitive and non-destructive surface science technique called time of flight secondary ion mass spectroscopy (ToF-SIMS) was used to image fingermarks on metal surfaces. This technique was compared to a conventional superglue based fuming technique that was accompanied by a series of contrast enhancing dyes (basic yellow 40 (BY40), crystal violet (CV) and sudan black (SB)) on three different metal surfaces. The conventional techniques showed little to no evidence of fingermarks being present on the metal surfaces after a few days. However, ToF-SIMS revealed fingermarks on the same and similar substrates with an exceptional level of detail. The ToF-SIMS images demonstrated clear ridge definition as well as detail about sweat pore position and shape. All structures were found to persist for over 26?days after deposition when the samples were stored under ambient conditions.     

Fixing Transient Iodine on Developed Latent Fingermarks

In the present study, a simple and novel fume–mist technique is described which can be used efficiently to fix the latent fingermarks developed using iodine. It is well known that the residues left over in the fingermarks interact with iodine to give transient brown impressions which disappear in a short time. Also, iodine forms colored complexes with various organic solvents. Based on iodine–fingermark interaction and iodine–solvent complex formation, latent fingermarks were developed on paper surface using iodine fumes which were subsequently fixed by spraying polar and nonpolar solvents. The fingermarks developed with this technique were not only clear but also permanent in nature. The interaction of fingermark residue, iodine, and solvent forming a ternary structure is believed to be a possible reason for the stability of iodine‐developed fingermarks. Ease of method, availability of chemicals, and minimum training make the method adaptable in routine development of forensic fingermarks present on paper surface.     

Refining Fingermark Development using Diacetylene Copolymers on Difficult Surfaces,

In further work investigating the intriguing application of diacetylene copolymers in fingermark detection, methods were developed to control (inhibit or enhance) the diacetylene polymerization reaction in fingermarks treated with a mixture of the monomers 2,4‐hexadiyne‐1,6‐bis‐(phenylurethane) (HDDPU) and 2,4‐hexadiyne‐1,6‐bis(p‐chlorophenylurethane) (HDDCPU) in acetone solution. These methods included the use of a humidity chamber to reduce the amount of background development while promoting development on the fingermark, subjecting developed fingermarks to freezing temperatures and using a solvent to remove unreacted monomer in order to inhibit the polymerization reaction. Developed fingermarks were enhanced by conventional lighting (white light, filtered light) and fast Raman mapping, which was shown to be advantageous over FTIR imaging. This study also demonstrated the applicability of diacetylene copolymer solutions in the covert detection of fingermarks on difficult surfaces. Furthermore, fingermarks were successfully developed with good ridge detail on pig skin (used as a model for human skin, a notoriously difficult surface on which to develop fingermarks).     

Application of mist to fingermark detection: Misting with high-boiling-point liquid containing p-dimethylaminocinnamaldehyde and cyanoacrylate

In order to detect latent fingerprints that could be damaged by liquid or powder reagents, non-destructive processes such as gaseous reagents have been developed. In this report, we propose the use of fine mist generated when hot vapor of high-boiling-point liquids is rapidly cooled by surrounding air for fingermark detection. Octyl acetate (OA), 2-phenoxyethanol (2PE), and methyl decanoate (MD) were found to efficiently produce mist when heated to 230°C. By combining these liquids with p-dimethylaminocinnamaldehyde (DMAC) and cyanoacrylate (CN), our team demonstrated effective fluorescence staining of cyano-treated fingermarks using DMAC/OA misting or DMAC/2PE misting, and one-step fluorescence detection of latent fingermarks without cyanoacrylate treatment using DMAC/OA/CN misting or DMAC/MD/CN misting. Fingermark fluorescence was efficiently observed by excitation with a blue LED light (max. wavelength 470 nm) equipped with an interference filter and passing through a 520 nm long-pass filter. We successfully obtained fluorescent images from fingermarks on several substrate materials using the developed misting method.     

Development of Latent Fingermarks on Various Surfaces Using ZnO‐SiO2 Nanopowder

Fingermarks are one of the most useful forms of evidence in identification and can provide generalized proof of identity in crime investigation. They are developed using various conventional powders. The novel nanopowder ZnO‐SiO₂ was synthesized via the conventional heating method and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), energy‐dispersive X‐ray (EDX) analysis, transmission electron microscope (TEM), and X‐ray diffraction (XRD). The mean particle size of ZnO‐SiO₂ nanopowder calculated through TEM was 32.9 nm. The development of fingermarks was carried out by powder dusting and small particle reagent (SPR) methods. Powder dusting method was used for the development of latent fingermarks on various dry, nonporous, and semi‐porous surfaces. The SPR method was also applied to wet nonporous surface. The developed latent fingermarks using ZnO‐SiO₂ nanopowder were found to have excellent quality with very clear third‐level ridges detail and had better visibility than commercially available white powder.     

A Small Population Study on Friction Skin Ridges: Differences in Ridge Widths Between Latent and Inked Fingerprints

Morphological changes in the width of latent fingermark ridges occur naturally over time. This could be used to examine the aging process of latents and eventually estimate time of deposition. In a crime context, it is common practice to compare a questioned (aged) fingermark with a database of known (inked) prints. Therefore, in the absence of fresh fingermarks for aging purposes, it is of interest to reveal correlations between these two categories of fingerprints with regard to the widths of their ridges. The present study explores correlations of ridge widths between flat and rolled inked prints with latent fingermarks visualized with carbon black (CB) and titanium dioxide (TiO₂)-based powders among a small population of ten donors. Results revealed consistent differences between the ridge widths of latent and inked prints as well as flat and rolled impressions. Latent fingermarks visualized with CB and TiO₂ powders showed ridges with comparable widths.     

The effect of corrosive substances on fingermark recovery: A pilot study

Corrosive substance attacks have become a growing issue within the UK. Although most commonly occurring in gang-related offences, there are high profile instances where this type of attack has been used to attack women to disfigure and destroy livelihoods. Despite the increase in such attacks, there has been very little published research into the recovery of forensic evidence from items used in these crimes. The effect of corrosive substances on the recovery of different types of forensic evidence is unknown, and there is no guidance for laboratories processing exhibits contaminated with corrosive substances regarding optimum treatments. This pilot study focused on establishing the effectiveness of a range of fingermark visualisation processes in recovering fingermarks on surfaces exposed to concentrated sulfuric acid (acid) and potassium hydroxide (alkali). Results indicate that on non-porous surfaces vacuum metal deposition and powder suspensions remain effective, and on porous surfaces fingermarks could still be visualised with physical developer. Alkalis were found to be more detrimental than acid environments in this limited study. The results demonstrate that fingermark recovery is still feasible on surfaces exposed to corrosive substances and provides encouragement that treatment protocols could be developed for this type of exhibit.     

Solid-state acquisition of fingermark topology using dense columnar thin films

Various vacuum techniques are employed to develop fingermarks on evidentiary items. In this work, a vacuum was used to deposit columnar thin films (CTFs) on untreated, cyanoacrylate-fumed or dusted fingermarks on a limited selection of nonporous surfaces (microscope glass slides and evidence tape). CTF deposition was not attempted on fingermarks deposited on porous surfaces. The fingermarks were placed in a vacuum chamber with the fingermark side facing an evaporating source boat containing either chalcogenide glass or MgF(2). Thermal evaporation of chalcogenide glass or MgF(2) under a 1 μTorr vacuum for 30 min formed dense CTFs on fingermark ridges, capturing the topographical features. The results show that it is possible to capture fingermark topology using CTFs on selected untreated, vacuumed cyanoacrylate-fumed or black powder-dusted nonporous surfaces. Additionally, the results suggested this might be a mechanism to help elucidate the sequence of deposition.