Visualization of Latent Fingerprint Corrosion of Brass

Abstract:  Visualization of latent fingerprint deposits on metals by enhancing the fingerprint-induced corrosion is now an established technique. However, the corrosion mechanism itself is less well understood. Here, we describe the apparatus constructed to measure the spatial variation (Δ V ) in applied potential ( V ) over the surface of brass disks corroded by latent fingerprint deposits. Measurement of Δ V for potential of 1400 V has enabled visualization of fingerprint ridges and characteristics in terms of this potential difference with Δ V typically of a few volts. This visualization is consistent with the formation of a Schottky barrier at the brass-corrosion product junction. Measurement of the work function of the corroded brass of up to 4.87 ± 0.03 eV supports previous results that suggested that the corrosion product is composed of p-type copper oxides. A model for the galvanic corrosion of brass by ionic salts present in fingerprint deposits is proposed that is consistent with these experimental results.     

Visualization of latent fingerprint corrosion of metallic surfaces

Abstract:  Chemical reactions between latent fingerprints and a variety of metal surfaces are investigated by heating the metal up to temperatures of ∼600°C after deposition of the fingerprint. Ionic salts present in the fingerprint residue corrode the metal surface to produce an image of the fingerprint that is both durable and resistant to cleaning of the metal. The degree of fingerprint enhancement appears independent of the elapsed time between deposition and heating but is very dependent on both the composition of the metal and the level of salt secretion by the fingerprint donor. Results are presented that show practical applications for the enhancement to fingerprints deposited in arson crime scenes, contaminated by spray painting, or deposited on brass cartridge cases prior to discharge. The corrosion of the metal surface is further exploited by the demonstration of a novel technique for fingerprint enhancement based on the electrostatic charging of the metal and then the preferential adherence of a metallic powder to the corroded part of the metal surface.     

High Resolution Imaging of Latent Fingerprints by Localized Corrosion on Brass Surfaces

Abstract:  The Atomic Force Microscope (AFM) is capable of imaging fingerprint ridges on polished brass substrates at an unprecedented level of detail. While exposure to elevated humidity at ambient or slightly raised temperatures does not change the image appreciably, subsequent brief heating in a flame results in complete loss of the sweat deposit and the appearance of pits and trenches. Localized elemental analysis (using EDAX, coupled with SEM imaging) shows the presence of the constituents of salt in the initial deposits. Together with water and atmospheric oxygen—and with thermal enhancement—these are capable of driving a surface corrosion process. This process is sufficiently localized that it has the potential to generate a durable negative topographical image of the fingerprint. AFM examination of surface regions between ridges revealed small deposits (probably microscopic "spatter" of sweat components or transferred particulates) that may ultimately limit the level of ridge detail analysis.     

Effect of Temperature on the Visualization by Digital Color Mapping of Latent Fingerprint Deposits on Metal

Visualization of fingerprint deposits by digital color mapping of light reflected from the surface of heated brass, copper, aluminum, and tin has been investigated using Adobe^® Photoshop^®. Metals were heated to a range of temperatures (T) between 50°C and 500°C in 50°C intervals with enhancement being optimal when the metals are heated to 250°C, 350°C, 50°C, and 300°C, respectively, and the hue values adjusted to 247°, 245°, 5°, and 34°, respectively. Fingerprint visualization after color mapping was not degraded by subsequent washing of the metals and color mapping did not compromise the visibility of the fingerprint for all values of T. The optimum value of T for fingerprint visibility is significantly dependent of the standard reduction potential of the metal with Kendall's Tau (τ) = 0.953 (p < 0.001). For brass, this correlation is obtained when considering the standard reduction potential of zinc rather than copper.     

Can the RUVIS Reflected UV Imaging System Visualize Fingerprint Corrosion on Brass Cartridge Casings Postfiring?

Comparisons are made between the visualization of fingerprint corrosion ridge detail on fired brass cartridge casings, where fingerprint sweat was deposited prefiring, using both ultraviolet (UV) and visible (natural daylight) light sources. A reflected ultraviolet imaging system (RUVIS), normally used for visualizing latent fingerprint sweat deposits, is compared with optical interference and digital color mapping of visible light, the latter using apparatus constructed to easily enable selection of the optimum viewing angle. Results show that reflected UV, with a monochromatic UV source of 254 nm, was unable to visualize fingerprint ridge detail on any of 12 casings analyzed, whereas optical interference and digital color mapping using natural daylight yielded ridge detail on three casings. Reasons for the lack of success with RUVIS are discussed in terms of the variation in thickness of the thin film of metal oxide corrosion and absorption wavelengths for the corrosion products of brass.     

The effect of electrostatic fingerprint visualization on integrated ballistic identification systems

Visualization of fingerprint corrosion on spent brass cartridge cases by the application of a high electrical potential and conducting carbon powder is becoming an accepted method of fingerprint enhancement. However, to date, no examination has been made of any effect this technique has on ballistic identification. To resolve this, images of the breech face and firing pin marks were captured on six plated nickel and six brass primer cup spent cartridge cases. Three nickel and three brass cases were then subjected to the application of a potential of +2500 V for a period of 1 min. The remaining cases were additionally subjected to the application of carbon powder. These latter cases were then washed to remove all traces of powder. Each case was recaptured with the same ballistic identification apparatus and imaging procedure. None of the twelve cases showed any visual difference after the application of the potential or conducting powder.     

Optical enhancement of fingerprint deposits on brass using digital color mapping

Abstract: The reflection of visible light from α‐phase brass subject to surface oxidation in air at elevated temperatures is investigated. X‐ray photoelectron and auger electron spectroscopy confirm that covered areas of brass (not exposed to air) display dezincification but an absence of significant surface oxidation, confirming a differential oxidation mechanism. Visualization of differential oxidation is shown to be enhanced by selective digital mapping of colors reflected from the surface of the brass using Adobe^® Photoshop^®. Enhancement is optimal when the brass is heated to ～250°C with areas of oxidation having a mirror‐like appearance. The use of this enhancement method to produce a faithful image of fingerprint ridge characteristics is demonstrated on brass shell casings where fingerprints were deposited prefiring.     

Response Assessment of Thermal Papers from Four Continents to Fingerprint Development by Heat

Latent fingerprint deposits on thermal paper sourced from the U.S., China, the U.K., and Australia have been visualized by heating. U.S. and Chinese sourced paper produced two distinct types of fingerprint development. In one type (type 1), the paper dye colors where the deposit is present (as previously reported) and in the other type (type 2) the ‘inverse’ of this gives paper coloring only in areas not coincident with the deposit. Both development types gave identifiable fingerprints, the majority fading within 24 h of heating. Fingerprint development from U.K. and Australian sourced paper was exclusively type 1 and resistant to fading. Temperatures for fingerprint visualization were higher for U.S. paper (64–71°C) and Chinese paper (75–95°C) than for U.K. and Australian sourced paper (43–50°C). Particularly for Chinese sourced paper, these temperatures were within a few degrees of the normal paper color temperature. A mechanism for type 2 fingerprint development is proposed.     

A Noninvasive and Speculative Method of Visualizing Latent Fingerprint Deposits on Thermal Paper

Latent fingerprint deposits on thermal paper have been visualized noninvasively at visible wavelengths when illuminated with a UV‐A light source (peak 365 nm). A higher intensity UV source (250 W/m² at 0.38 m) gave superior fingerprint visibility when compared with a 60 W/m² (at 0.4 m) source. Removing the visible (blue) component of the light source emission did not adversely affect the visibility of the fingerprint. Sample fingerprints from 100 donors, when examined 24 h after deposition, produced identifiable fingerprints from nearly 34% of fingerprint deposits. A mechanism for the observed visibility is proposed based on low emission of visible wavelengths from areas of thermal paper coincident with the fingerprint deposit, when illuminated with UV. This is likely due to a weak color change in the thermal paper dye arising from protonated amino acid components of the sweat. This effect was not observed on nonthermal paper.     

Effect that the relative abundance of copper oxide and zinc oxide corrosion has on the visualization of fingerprints formed from fingerprint sweat corrosion of brass

From an examination of the fingerprint sweat corrosion of 40 different individuals on α phase brass, we show that an increase in visualization can be achieved by applying a negative potential to the brass followed by the introduction of a conducting powder. Previously, this technique has been demonstrated only for a positive applied potential and a corrosion product that was dominated by p-type copper (I) oxide. X-ray photoelectron and Auger electron spectroscopic analyses of the surface of the corroded brass show that an increase in visualization with a negative applied potential corresponds with an increase in the concentration of n-type zinc oxide relative to p-type copper (I) oxide with the Cu:Zn ratio <0.8:1. Work function conditions for the formation of an n-type zinc oxide/brass rectifying Schottky barrier are fulfilled.     

The thermodynamics of latent fingerprint corrosion of metal elements and alloys

Redox reactions taking place between the surface of a metal and fingerprint residue have been expressed thermodynamically in terms of both the Nernst equation for reduction potential and the complexation constant for the formation of complex metal halide ions in aqueous solution. These expressions are used to explain experimental results for the corrosion of 10 different metal elements by fingerprint residue in air at room temperature. Corrosion of noble metals, such as silver and gold, supports the proposition that the degree of metal corrosion is enhanced by the presence of chloride ions in eccrine sweat. Extending the experiments to include 10 metal alloys enabled the construction of a fingerprint corrosion series for 20 different metals. Fingerprint corrosion on metals alloyed with > approximately 40% copper was found to display third level fingerprint detail. A comparison of both conventional ink on paper and digital (Livescan) fingerprinting techniques with fingerprints deposited on 9 Karat gold alloy has shown that gold alloy depositions are least susceptible to third level detail obliteration by poor fingerprint capturing techniques.     

A Comparison of Fingerprint Sweat Corrosion of Different Alloys of Brass

Fingerprint sweat from 40 donors was deposited onto samples of five α and α + β phase brasses, comprising five alloys with different copper and zinc concentrations, two of which also had the addition of small concentrations of lead. Visual grading of the visibility of the corrosion revealed that brasses with the least amount of zinc produced the most visible and fully formed fingerprints from the most donors. Consideration of previously reported mechanisms for the corrosion of brass suggests red copper (I) oxide as a likely corrosion product for low zinc brasses, and a consideration of the color, composition, and solubility of fingerprint sweat corrosion products suggests that copper (I) oxide produces good contrast and visibility with the brass substrate. Scanning electron microscope images of the corrosion of all five alloys confirmed the enhanced contrast between corroded and uncorroded areas for low zinc alloys.     

A Modified Electrostatic Adsorption Apparatus for Latent Fingerprint Development on Unfired Cartridge Cases

Visualization of latent fingerprints on metallic surfaces by the method of applying electrostatic charging and adsorption is considered as a promising chemical‐free method, which has the merit of nondestruction, and is considered to be effective for some difficult situations such as aged fingerprint deposits or those exposed to environmental extremes. In fact, a portable electrostatic generator can be easily accessible in a local forensic technology laboratory, which is already widely used in the visualization of footwear impressions. In this study, a modified version of this electrostatic apparatus is proposed for latent fingerprint development and has shown great potential in visualizing fingerprints on metallic surfaces such as cartridge cases. Results indicate that this experimental arrangement can successfully develop aged latent fingerprints on metal surfaces, and we demonstrate its effectiveness compared with existing conventional fingerprint recovery methods.     

Effect of chloride ion concentration on the galvanic corrosion of α phase brass by eccrine sweat

Inductively coupled plasma mass spectrometry measurement of the relative concentration of sodium, chloride, calcium, and potassium ions in eccrine sweat deposits from 40 donors revealed positive correlations between chloride and sodium (ρ = 0.684, p < 0.01) and chloride and calcium ions (ρ = 0.91, p < 0.01). Correlations between ion concentration and the corrosion of α phase brass by the donated sweat were investigated by visual grading of the degree of corrosion, by measuring the copper/zinc ratio using energy-dispersive X-ray spectroscopy, and from a measurement of the potential difference between corroded and uncorroded brass when a large potential was applied to the uncorroded brass. An increasing copper/zinc ratio (indicative of dezincification) was found to correlate positively to both chloride ion concentration and visual grading of corrosion, while visual grading gave correlations with potential difference measurements that were indicative of the preferential surface oxidation of zinc rather than copper.     

微晶荧光乳浊液显现血、汗指纹的研究

目的　显现非渗透性和半渗透性客体上的血指纹、汗潜指纹。方法　应用微晶小颗粒荧光乳浊液显现血、汗指纹。结果　对常见的各种非渗透性和半渗透性客体上的新鲜和陈旧的血、汗指纹均可显出。结论　该方法与传统的物理显现方法相比较在于显出效果基本不受指纹遗留时间和客体的性质及表面颜色的影响 ,并且此方法实用、可靠 ,同时该配方还可用于非渗透性和半渗透性客体上涉油指纹的显现 ,是常见客体上血、汗指纹显现的一个重要突破     

Visualization of Latent Fingerprint Corrosion on a Discharged Brass Shell Casing

Abstract:  Latent fingerprint visualization on discharged shell casings can provide good forensic evidence, particularly if the casing is recovered at the scene of a crime where a firearm has been discharged. Unfortunately, visualization of such latent fingerprints when they were deposited prior to discharge of the firearm is problematic as both increased temperature and abrasive friction can inhibit fingerprint visualization with conventional techniques. We present a case study that demonstrates latent fingerprint visualization on a discharged shell casing recovered 14 years ago from the scene of a homicide. Previous cyanoacrylate fuming of the casing had failed to reveal any fingerprints. We use a visualization technique in which a conducting carbon powder adheres preferentially to latent fingerprint corrosion of the casing surface, following the application of a potential of 2.5 kV to the casing. This technique presents opportunities for the review of old cases and for consideration of its use in current cases.     

Comparison of Chemical and Heating Methods to Enhance Latent Fingerprint Deposits on Thermal Paper

A comparison is made of proprietary methods to develop latent fingerprint deposits on the inked side of thermal paper using either chemical treatment (Thermanin) or the application of heat to the paper (Hot Print System). Results with a trial of five donors show that the application of heat produces statistically significantly more fingerprint ridge detail than the chemical treatment for both fingerprint deposits aged up to 4 weeks and for a nine sequence depletion series. Subjecting the thermal paper to heat treatment with the Hot Print System did not inhibit subsequent ninhydrin chemical development of fingerprint deposits on the noninked side of the paper. A further benefit of the application of heat is the rapid development of fingerprint deposits (less than a minute) compared with up to 12 h for the Thermanin chemical treatment.     

The Effect of Light Exposure on the Degradation of Latent Fingerprints on Brass Surfaces: The Use of Silver Electroless Deposition as a Visualization Technique

We have studied the degradation of sebaceous fingerprints on brass surfaces using silver electroless deposition (SED) as a visualization technique. We have stored fingerprints on brass squares either (i) in a locked dark cupboard or (ii) in glass‐filtered natural daylight for periods of 3 h, 24 h, 1 week, 3 weeks, and 6 weeks. We find that fingerprints on brass surfaces degrade much more rapidly when kept in the light than they do under dark conditions with a much higher proportion of high‐quality prints found after 3 or 6 weeks of aging when stored in the dark. This process is more marked than for similar fingerprints on black PVC surfaces. Identifiable prints can be achieved on brass surfaces using both SED and cyanoacrylate fuming (CFM). SED is quick and straightforward to perform. CFM is more time‐consuming but is versatile and can be applied to a wider range of metal surfaces than SED, for example brass surfaces which have been coated by a lacquer.     

Effect of temperature on rectifying Schottky barriers formed from fingerprint sweat corrosion of brass

Corrosive electrochemical processes of brass, including those resulting from fingerprint sweat, continue to be studied because of the widespread industrial use of brass. Here, we examine how increased temperature affects the relative abundance of fingerprint sweat corrosion products and the rectifying Schottky barrier formed between p-type copper (I) oxide corrosion and brass. X-ray photoelectron spectroscopy confirms increasing dezincification with increasing temperature. This leads to n-type zinc oxide replacing copper (I) oxide as the dominant corrosion product, which then forms a rectifying Schottky barrier with the brass, instead of copper oxide, when the temperature reaches c. 600°C. Using X-ray diffraction, resulting diodes show polycrystalline oxides embedded in amorphous oxidation products that have a lower relative abundance than the diode forming oxide. Conventional current/voltage (I/V) characteristics of these diodes show good rectifying qualities. At temperatures between c. 100 and c. 600°C, when neither oxide dominates, the semiconductor/brass contact displays an absence of rectification.     

The Effect of Varying the Composition of Fingerprint Sweat Deposits on the Corrosion of Brass and Fingerprint Visibility

Corrosion of α‐phase brass by sebaceous sweat fingerprint deposits produced identifiable impressions in a majority of samples (n = 40) 4 days after deposition. Combining sebaceous with eccrine sweat yielded a greater percentage of identifiable fingerprint deposits, although this increase was not statistically significant. Production of identifiable fingerprints from eccrine sweat deposits was dependent on the sampling time of year with deposits taken during summer months giving similar percentages of identifiable fingerprints to sebaceous deposits. A statistically significant positive correlation was found between elapsed days after deposition and identifiable eccrine (ρ = 0.787, p < 0.05), sebaceous (ρ = 0.724, p < 0.05), and eccrine/sebaceous mixture (ρ = 0.908, p < 0.01) fingerprints deposited during summer months. The summer increase in the percentage of identifiable eccrine sweat deposits was statistically significant compared to winter eccrine deposits (p < 0.0001). Observations were consistent with results obtained from artificial sebaceous and eccrine sweat.