机制版假币票面上印刷疵点的检验

目的分析假币票样上的印刷疵点,为串并假币机制版印制点提供科学依据。方法通过图文扫描和图象处理技术,获取假币票面上的印刷疵点信息,研究梳理不同票面上一致的疵点组合,寻找其与印版的相关性,继而推导与印制者的相关性。结果找到可以表征相同胶片版或PS版的不同冠字号码假币票样上一致的印刷疵点。结论可以通过图文扫描和图象处理手段得到印刷疵点特征。     

针式打印文件检验的探讨

针式打印机是一种常用的办公机具,从针式打印机的结构和打印原理出发,阐述了针式打印文件种类鉴别和个体识别所依据的打印特征,为针式打印文件的检验鉴定进行操作层面的探讨。     

Characterization of Printing Inks Using DART‐Q‐TOF‐MS and Attenuated Total Reflectance (ATR) FTIR

The rise in improved and widely accessible printing technology has resulted in an interest to develop rapid and minimally destructive chemical analytical techniques that can characterize printing inks for forensic document analysis. Chemical characterization of printing inks allows for both discrimination of inks originating from different sources and the association of inks originating from the same source. Direct analysis in real‐time mass spectrometry (DART‐MS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR) were used in tandem to analyze four different classes of printing inks: inkjets, toners, offset, and intaglio. A total of 319 samples or ~ 80 samples from each class were analyzed directly on a paper substrate using the two methods. DART‐MS was found to characterize the semi‐volatile polymeric vehicle components, while ATR‐FTIR provided chemical information associated with the bulk components of these inks. Complimentary data results in improved discrimination when both techniques are used in succession resulting in >96% discrimination for all toners, 95% for all inkjets, >92% for all offset, and >54% for all intaglio inks.     

系统鉴定方法在朱墨时序鉴定中的应用

朱墨时序鉴定是通过对印字交叉部位的检验,得出的印字先后顺序的判断。朱墨时序鉴定是文件鉴定的重要组成部分,它往往是判定文件物证真实性的重要依据之一。任何文件物证都是一个由多个要素组成的文件系统。通过介绍系统鉴定方法的原理、方法,以鉴定实践说明其在朱墨时序鉴定中的三种作用,同时也强调各种检验方法的综合运用。提倡在朱墨时序鉴定中,应运用系统鉴定方法,更加准确的把握印字交叉部位的表观特征,从而提高朱墨时序鉴定的准确性。     

Technical Note: Analyzing the effect of repeated fusing on toner to examine printing alterations made by the same laser printer

With continuous innovations in laser printing technology, the number of cases of falsification using laser printers is increasing annually. Difficulties in identifying printing alternations, especially laser-printed alternations by the same printer are increasing. Effectively, repeated printing on the same page by the same printer means the original toner on the document was fused repeatedly. Thus, this study mainly investigates the effects of second fusing on the microscopic morphology of toner to examine whether documents have been tampered with. To detect the influence of fusing on the microscopic morphology of toner, 170 documents printed by 17 different models of laser printers from 5 brands were studied. It was found that, according to microscopic observations, the micrographs of toner may become brighter, darker or both with repetition of the fusing process. By calculating the average gray value of the micrographs of toner, it was found that, in some laser printers, the gray value of the thermoplastic accumulation area will increase after a second fusing, and the gray value of the toner particle dispersion area will decrease. In conclusion, by comparing the micrographs of toner from suspicious and reliable contents on the same page or in the same document, together with the measurement and analysis of average gray values, it is possible to examine the once- and twice-fused document contents, and further determine whether the document has been altered.     

An Examination of the Sequence of Intersecting Seal and Laser Printing Toner Line

Examining the sequence of intersecting seal and laser printing line is a significant method of determining the authenticity and validity of documents. In this study, five brands of stamp pad inks, three types of inkpads and seven kinds of laser printers were used to make heterogeneous line intersections. Observation method of physical characteristics, scraping technique and fluorescence method was used to determine the sequence of intersecting lines. Distinguishing features were noted between the materials produced in both sequences. As the results obtained from the study were positive, these features might provide a scientific basis for accurately determining the sequence between laser printing line and inkpad (stamp pad ink) seal.     

法医文证审查100例分析

通过100例法医文证审查案件的分析,发现在目前检察机关文证审查工作中,存在委托数量不足、委托程序不规范、送检材料不全面等问题;在送审鉴定文书中,也存在标准条文掌握不当、鉴定人基础知识欠缺和粗心大意等问题。同时发现,鉴定文书的规范化程度和采信率已经得到有效的提高;且规范化越高的鉴定机构,则其鉴定文书的准确率越高,被采信率也越高。目前有必要加强检察技术部门文证审查的技术水平,进一步积累办案经验,切实增强检察机关的法律监督能力。     

A simple logical approach to questioned envelopes examination.

This case report outlines research undertaken as the result of a document examination case in which two envelopes were involved. The combination of the circumstances of the case and the results of the examination allows a simple application of a logical approach to pre-assess the probability that an envelope (or a package) potentially recovered at a suspect's home comes from the same batch (same source) as questioned envelopes. This highlights that it is useful to examine envelopes.     

Examination of the Sequence between Laser Printing and Rollerball Pen Writing Without an Intersecting Stroke

Examining the sequences of printing and writing is a significant method of determining the authenticity and validity of documents. Forensic document examiners have extensively studied crossing lines, which has produced useful information. However, the sequence for laser printing and rollerball pen writing without crossing strokes has not been studied. To solve this problem, volunteers were invited to write characters on A4 paper with different rollerball pens using two sequences. Four laser printers applied print to these sheets, and the materials were examined using an Optem A-Zoom2 video tomography microscope. Consequently, distinguishing features were noted between the materials produced in both sequences. These features might provide a scientific basis for accurately determining the sequence between laser printing and rollerball pen writing in the absence of intersecting strokes.     

A Preliminary Investigation into the Accuracy of 3D Modeling and 3D Printing in Forensic Anthropology Evidence Reconstruction,

There is currently no published empirical evidence‐base demonstrating 3D printing to be an accurate and reliable tool in forensic anthropology, despite 3D printed replicas being exhibited as demonstrative evidence in court. In this study, human bones (n = 3) scanned using computed tomography were reconstructed as virtual 3D models (n = 6), and 3D printed using six commercially available printers, with osteometric data recorded at each stage. Virtual models and 3D prints were on average accurate to the source bones, with mean differences from ?0.4 to 1.2 mm (?0.4% to 12.0%). Interobserver differences ranged from ?5.1 to 0.7 mm (?5.3% to 0.7%). Reconstruction and modeling parameters influenced accuracy, and prints produced using selective laser sintering (SLS) were most consistently accurate. This preliminary investigation into virtual modeling and 3D printer capability provides a novel insight into the accuracy of 3D printing osteological samples and begins to establish an evidence‐base for validating 3D printed bones as demonstrative evidence.     

A validation study for vinyl electrical tape end matches

Fracture matches are considered the strongest conclusion in the forensic examination of rigid materials, such as glass, metal, and paint. However, publications that support the fracture matching of polymeric films, such as tape backings, are limited. This study was designed to determine the validity and error rate associated with conducting end-match (fracture match) examinations on vinyl electrical tape. Test designs varied the source roll of tape, test preparer, or mode of separation from the roll. Results indicated that each affected the resulting severed tape ends. The analysts examining the end matches also had an effect on the results. Eight end matches in the study were not identified by the initial analysts and were considered inconclusive. One end match was misidentified, resulting in one false positive and an error rate of 0.049%. These results support a comprehensive physical and chemical tape comparison regardless of indications of an end match.     

Could Defects on a Rubber Stamp be Reproduced on a Duplicated Rubber Stamp?

The examination of stamp impressions has been an integral part of questioned document examination since its inception. Matching in design details and unique defects has proven to be essential factors for rubber stamps and stamp impression examination. In this study, several duplicate stamps were made from various rubber stamp manufacturers in Hong Kong, from the same original stamp impression(s). The objective was to examine the stamp impressions prepared from these duplicated stamp products and compared with each other and to determine whether they could be distinguished from the source stamp impression(s); by comparison of the size and defects deliberated introduced onto the latter. Further consideration of this study was an attempt to create a perfect duplicate stamp from an original stamp impression. The results of the analysis showed that the quality of source stamp impression(s) and scanner device of the stamp manufacturing process, and the knowledge of the stamp manufacturer were critical to the quality and outcome of the duplicated stamp products. It is concluded that although a perfect duplicate stamp could only be made under several essential control conditions, it was still possible to create a duplicate stamp that replicated the features of the original when a high-quality source stamp impression was available.     

荧光检验法在朱墨时序鉴定中的应用研究

朱墨时序鉴定一直是文书司法鉴定实践中常见的鉴定项目,也是研究的热点和疑难问题.通过实验研究并结合检案实践,较系统地阐述了视频荧光光谱检验法和显微荧光检验法在朱墨时序鉴定的具体应用,探讨了荧光检验的技术要点.研究表明,荧光检验法（特别是显微荧光检验法）具有普通显微检验法的优点,同时对普通显微检验法中难以观察到的印文或文字色料荧光特性及色料的微观分布状态,具有明显的检验效果,是普通显微检验法有效的补充检验手段.     

Use of diagonal teeth measurements in predicting gender in a Turkish population

Mesiodistal and buccolingual measurements, commonly used as a means of sex determination from teeth, can sometimes cause difficulties. The aim of this study is to test whether diagonal measurements can make it possible to take more accurate measurements. The results of diagonal measurements of dental casts taken from 30 males and 30 females have been evaluated by discriminant function statistics. Intra- and interobserver error tests did not indicate any statistically significant differences between the findings of two observers. Seven of the 14 measurements on the maxilla and 10 of the 14 measurements on the mandible have been found to be significantly greater in males. According to the results of the stepwise discriminant function statistics, the most contributory measurements to the function were upper first incisor mesiobuccal-distolingual (MBDL) and distobuccal-mesiolingual, lower second incisor MBDL, and lower canine MBDL. The highest reliability was obtained in MBDL measurements. It was realized that diagonal measurements of teeth, especially of canines, revealed clear dimorphic differences. Classification accuracy was found to be 83.3% for total sample, 78.3 for upper jaw, and 85.0% for the lower jaw. Accuracy rate was higher in the lower teeth. Commonly seen orthodontic anomalies, such as tooth rotations, crowding, attritions, deep dentin-enamel junction defects, and certain types of fillings, could make it difficult to correctly take width measurements or could cause other mistakes to occur. This explains the reason why this research has been considered to be of some use in diagonal measurements, which is an accurate method, particularly when employed for the front teeth.     

The Classification of Inkjet Inks Using AccuTOF™ DART™ (Direct Analysis in Real Time) Mass Spectrometry—A Preliminary Study

A novel approach for the analysis of inkjet inks is being reported. A time‐of‐flight mass spectrometer, coupled with a Direct Analysis in Real Time (DART?) ion source (AccuTOF? DART?), was used to determine if inkjet inks from various manufacturers and models of printers could be reliably differentiated, characterized, and identified. A total of 217 ink standards were analyzed. As inkjet printing often involves the use of multiple colors (e.g., cyan, magenta, yellow, and black) to form an image or text, two different approaches to creating a library of standards and sampling methods were evaluated for implementation in a standard operating procedure. This research will show that a microscopic examination of the region of interest is requisite to identify what colors were utilized during the printing process, prior to comparing with known standards. Finally, blind testing was administered with 10 unknown samples to assess the validity and accuracy of the methodology.     

肋骨骨折影像学在法医鉴定中的应用及相关问题

肋骨骨折法医学的诊断主要依靠医学影像学检查结果,影像学的误诊或漏诊将直接影响鉴定意见的准确性,从而可能导致刑事或民事案件的审判错误。本文详尽地总结和分析了肋骨骨折各种影像学检查技术的优缺点、漏误诊原因、法医学鉴定现状及法医鉴定时需考虑的因素,以提高法医学鉴定的准确性。     

On the spectroscopic cum chemometric approach for differentiation and classification of inkjet,laser and photocopier printed documents

The potential of ATR-FTIR spectroscopy combined with chemometric methods is explored for the rapid and no-destructive forensic investigation of inkjet, laser and photocopier printed documents. The aim of the present study is to ascertain the source of origin of unknown printed documents, i.e., whether it belongs to the laser or inkjet or photocopier devices and also to visualize the intra-variations present in the same types of printed documents. It is observed that these printing inks contain polystyrene, bisphenol A, methyl acrylate and aromatic ethers as the main chemical constituents. The standard normal variate normalization is performed in order to eliminate the differences caused by the amount of toner powder/inks. The discrimination among printed documents is achieved by using chemometric methods including hierarchal cluster analysis and principal component analysis. Further, linear discriminant analysis is used to classify the unknown printed documents into its respective class of printing devices. The present methodology provides robust, non-destructive, reproducible, and simultaneous identification methods for printed documents.     

创伤科病历书写相关缺陷及其对司法鉴定的影响

病历是创伤病人进行司法鉴定的重要客观资料，病历书写中相关缺陷直接或间接影响着司法鉴定活动的正常进行。分析创伤科病历书写中的一些常见缺陷对司法鉴定带来影响，强调提高创伤科医务人员的法律意识及病历书写质量是保证司法鉴定结论客观公正的重要因素之一。     

Evaluation of match criteria used for the comparison of refractive index of glass fragments

For comparative glass examinations, the refractive indices (RIs) of recovered glass fragments are often compared to a test interval defined by measurements from a broken glass object. RI measurements from five modern float glasses were used via resampling to assess the frequencies of false exclusion errors for eight test criteria as functions of the number of measurements. The test criteria were based on ranges, fixed intervals, and multiples of standard deviations of the known source measurements. The observed error rates for the eight tests studied are between zero and c. 35%, depending upon the match criteria, the number of measurements, and the RI distribution for a glass source. The results of this study can be used to predict the false exclusion rate for a test criterion under a given set of conditions or to select test criteria that result in a desired error rate for these typical sheet glasses.     

论印刷文件鉴定标准

在分析印刷文件的印刷技术、印刷设备、文件形式、鉴定项目和鉴定技术的基础上,提出印刷文件鉴定标准体系应包含的内容及其构架,并对制定印刷文件鉴定标准中需要解决的问题进行探讨。