红外光谱微量水平衰减全反射技术检验常见胶水的应用研究

目的建立无损快速检验胶水红外光谱法。方法利用红外光谱衰减全反射技术（ATR）对8种常见胶水样品进行光谱分析,根据出峰位置差异,对8种胶水样品进行鉴别,并建立相应的红外光谱数据库。结果不同类型的胶水其红外图谱有明显差异,而同一类胶水在某些波数区间也存在着一定的差异。结论利用红外光谱衰减全反射技术可以快速、准确、无损的检验鉴别胶水样品。     

基于短波紫外光荧光现象快速鉴别静电复印纸的种类

目的 建立无损、快速静电复印纸的鉴别方法.方法 利用文检仪短波紫外光,对30种不同品牌或相同品牌不同批次的静电复印纸测试并比对分析.结果 相同条件下,不同纸张的紫外荧光现象不同,根据纸张在短波紫外光激发下的荧光强弱、荧光纤维条的长短、粗细、弯曲形状和分布稀疏程度等特征,可鉴别不同品牌或相同品牌不同批次的静电复印纸.结论 该方法是一种简单、无损、高效、实用的检验方法.     

利用FT-IR检验纸张初探

目的初步探讨利用傅立叶红外光谱仪对纸张检验的鉴别力。方法利用傅立叶红外光谱仪对不同种类纸张、同一厂家不同批次的纸张进行检验。结果通过比较红外光谱图中出现的特征峰差异,确定纸张的差异。结论用该方法可以对不同种类纸张、同一厂家不同批次的纸张进行区分,同时可以分析纸张中有机物的特征基团。     

静电复印纸的FT－Raman光谱检验

对23种品牌的静电复印纸的拉曼图进行了分析,根据填料峰的不同可将其分为三大类根据纤维素峰和木素峰的相对峰强度比的不同,利用正态分布的t检验方法对静电复印纸作了进一步区分,为区分不同牌号的静电复印纸提供了一种参考方法.     

傅立叶变换红外光谱检验生物降解塑料

目的建立生物降解塑料的检验方法;方法应用傅立叶变换红外光谱对生物降解塑料进行分析;结果通过对生物降解塑料PBAT的主要吸收带进行的分析,得到了PBAT及其制品红外光谱的特点;结论用红外光谱检验生物降解塑料操作简便、信息量大、结果准确,样品用量少、不破坏检材。     

傅立叶变换红外光谱法检验口红的研究

目的建立一种灵敏、准确、无损的口红检验方法。方法利用傅立叶变换红外光谱仪,采用SmartPerformer采样器,对202个不同产地、不同品牌和同一品牌不同牌号的口红样品进行分析检验。结果依据红外光谱图中吸收峰的不同,可以将口红样品加以区分。结论该检验方法不破坏检材,重现性好,可用于鉴定案件现场中提取到的口红物证。     

氨基树脂漆的傅立叶变换红外光谱分析

根据红外谱图的相似程度决定两种涂料是否属同一种类的涂料是最基本也是最初级的检验方法,不可避免地带有极大的盲目性,只有把握了特征峰所代表的基团的振动形式,才能准确地识谱,正确地鉴别.本文介绍了氨基树脂漆的傅立叶变换红外光谱分析及谱图解释.     

纤维的红外光谱鉴别方法研究

对124例纤维样品进行红外光谱分析，研究了各种不同类型纤维的红外光谱特征峰。建立了常用纤维红外光谱图谱库。利用红外光谱对常用纤维进行光谱分析，是一种简便、快速、准确的鉴别方法。     

傅立叶变换红外光谱法检验静电复印墨粉

目的　通过对静电复印墨粉进行检验 ,达到对不同厂家及不同型号墨粉区分的目的。方法　首先利用电熨斗加热提取复印件的墨粉 ,然后利用傅立叶变换红外光谱法对 9个墨粉厂家和 2 4种牌号进行检验。结果可以达到厂家区分和大部分牌号区分 ,区分率达到 95 .7%。结论　本研究对实际应用有较大参考价值。     

傅立叶显微红外化学成像在朱墨时序鉴定中的应用研究

目的建立朱墨时序的傅里叶显微红外成像检验方法。方法根据印文及油墨的红外光谱特征峰,使用傅立叶变换红外（FTIR）成像系统直接对纸张上印文及文字油墨进行化学成像,根据成像特征从而判断朱墨时序。结果先打印后盖章的红外成像中油墨字迹的红外成像不完整,有被印章所覆盖的痕迹,而印章的红外成像完整,在字迹中可见印章成像斑点。先盖章后打印的红外成像中油墨字迹的红外成像完整,没有被印章所覆盖,而印章的红外成像不完整,被字迹的油墨所覆盖。结论该方法较传统的鉴定方法更加快速、简单,可以更加直观的反映行文顺序,并且具有不破坏检验样本的特点。     

合成大麻素类新精神活性物质4F-MDMB-BICA的检测

目的 建立基于红外光谱(fourier transform infrared,FT-IR)、气相色谱-质谱联用(gas chromatography-mass spectrometry,GC-MS)、高分辩质谱(high resolution mass spectrometer,HRMS)和核磁共振波谱(nuclear...     

A practical technique for the fabrication of transparent bite mark overlays

A quick, inexpensive, and accurate technique for generating transparent overlays, using office photocopy machines, for use in bite mark case analysis is presented. The critical step in the fabrication process involves determination of the accuracy of the product produced by the photocopy machine. A reliable method for making such a determination is discussed.     

The use of an electrostatic detection device to identify individual and class characteristics on documents produced by printers and copiers--a preliminary study

The market is inundated with inkjet printers, laser printers, and photocopiers, which are often used in criminal activities. Many of these office machines are built by various manufacturers, hence they are constructed with different hardware designs (e.g. "rolling" and "grabbing" mechanisms) that have changed over the years due to technological advances. Examinations of printed documents that involve the chemical analysis of ink colorants and the identification of physical machine defects such as trash marks are essential for the forensic examiner, but new techniques are needed to more closely identify a machine model or group of models. An electrostatic detection device (EDD) provide forensic examiners with a nondestructive method to examine indentations on a document. In this work, an EDD is used to detect latent physical markings left on documents by printers and photocopiers. Seventeen inkjet printers, 12 laser printers, and 3 photocopy machines were used to produce test documents. Physical markings were detectable in the large majority of the documents and were reproducible 100% of the time.     

裂解气相色谱法检验静电复印墨粉

静电复印墨粉是复印文件检验的重要组成部分。本文通过电熨斗加热提取纸张上的墨粉,排除了纸张的平扰,用裂解气相色谱法对9个厂家共23个型号的墨粉进行检验。研究表明。该方法灵敏度高,分辨能力强,区分率可达到90.3％,是一种有效的检验方法。     

试论光敏印章盖印印文的检验

目的　探讨光敏印章盖印印文形成机理 ,总结检验方法。　方法　查勘刻制光敏印章流程 ,制作光敏印章 ,观察其盖印印文特点 ,查阅相关资料 ,结合检案实践对印文特征进行评析。　结果　弄清了光敏印章的制章原理 ,提出了光敏印章种类鉴别和个体鉴别的特点和方法。     

The analysis and identification of steroids.

In October 1987, anabolic steroids were controlled under Schedule IV of Florida State Statute 893. This study was designed to establish a method of analysis and identification of evidentiary cases. Spot tests, Fourier transform infrared spectroscopy (FT-IR), gas chromatography/mass spectroscopy (GC/MS), Fourier transform nuclear magnetic resonance (FT-NMR), thin-layer chromatography (TLC), and extractions were performed on standard and pharmaceutical steroids. Mandelin's accompanied by the sulfuric acid test was found to provide the best indication of a steroid among the following four spot tests performed: sulfuric acid, napthol-sulfuric acid, Liebermann's, and Mandelin's. TLC was successfully performed on the steroid samples using two different eluent systems: TP and TQ. GC/MS was a very useful method of analysis applicable to most steroids, with only a few exceptions. FT-IR spectra were found to match the spectra from the literature for all the standards tested. The combination of the above techniques was used successfully to identify all the standards tested.     

中国汉族唇纹研究(Ⅱ)——稳定性及分型

本文对部分中国汉族64名(男36名,女28名)个体的唇纹进行了追踪调查(间隔4年零5个月)。过对所得材料的研究,探讨了唇纹特征随年龄增加而发生变化的规律,并根据唇纹特征提出了新通的分类方法。     

Identification and characterization of the new designer drug 4'-methylethcathinone (4-MEC) and elaboration of a novel liquid chromatography-tandem mass spectrometry (LC-MS/MS) screening method for seven different methcathinone analogs

A fast and simple LC-MS/MS method was developed for screening mephedrone, butylone, methylenedioxypyrovalerone (MDPV), flephedrone, methylone and methedrone in bulk powder samples. Samples were separated on a reverse phase column using gradient elution with mixtures of water, acetonitrile and formic acid. After optimization a limit of detection of about 2ngmL(-1) was achieved using multiple reaction monitoring (MRM) mode. Total run time was less than 8min. Typical fragmentation characteristics of the studied compounds are discussed. The method was successfully applied to several unknown bulk powder samples seized by the Hungarian Customs and Finance Guard. One of the samples contained the new designer drug 4'-methylethcathinone (4-MEC), which was identified and characterized by LC-MS/MS, NMR, FT-IR and LC-TOF-MS techniques. The method is also deemed to be applicable for the screening of simple dosage forms such as tablets and capsules.     

Identification of an unknown body by means of osteosynthesis material

The present case describes the identification of an unknown corpse recovered from water by means of two osteosynthesis plates with serial numbers. This method of identification is compared with the pros and cons of other possibilities of identification using medical findings. Although in Western Europe osteosynthesis material is normally removed some months after the operation, autoptic exposure of a suspicious bone may occasionally allow valid, fast and convenient identification of the body, especially if osteosynthesis material with different serial numbers was used.