Analysis and discrimination of electrical tapes: Part I. Adhesives

This study involved the comparative analysis and discrimination of 90 electrical tape adhesives. The objectives included the evaluation of the ability of individual techniques to discriminate samples and the assessment of the ability of the techniques combined to distinguish samples. The techniques utilized were stereomicroscopy, Fourier transform infrared spectroscopy (FTIR), pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS), and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS). Stereomicroscopy, to assess adhesive colors of black, clear/colorless, and clear adhesives with brown tint, resulted in a discrimination of 53%. FTIR analysis yielded eight distinct groups with a discrimination of 67%. Py-GC/MS analysis resulted in 16 groups with a discrimination of 83%. These analyses confirmed and further subdivided the FTIR groups. SEM/EDS resulted in five separate groups at 17% discrimination, increasing the overall discrimination to above 85%.     

Chemical fingerprinting of adhesive tapes by GCMS detection of petroleum hydrocarbon products

Pressure-sensitive adhesive tapes often represent key evidence of crimes such as assault, rape or homicide; thus, the development of analytical techniques able to contribute to a detailed characterization of these materials is of forensic importance. The gas chromatography-mass spectrometry (GCMS) analysis of the solvent extractable fractions of a suite of electrical and gaffer adhesive tapes spanning a range of colors and manufacturers identified a number of petroleum-derived hydrocarbons. Molecular and isotopic analyses of hydrocarbon constituents of complex materials have found wide analytical utility including the forensic investigation of oil spills and arson. Here, we investigate the utility of these techniques for characterizing the hydrocarbon composition of pressure-sensitive adhesive tapes for forensic correlation purposes. Subtle distinction of tape samples was evident in the GCMS distribution of several hydrocarbon groups including alkyl-naphthalenes, hopane and sterane biomarkers. Linear discriminant analysis of the abundances of these products provided high level differentiation of tape manufacturer. The distinction of different adhesive tape samples was further extended by measurement of their stable carbon isotopic values. The molecular and isotopic differences of the petroleum content of tapes are consistent with the use of different petroleum materials used in the manufacturing process and demonstrate the benefits of the combined use of complementary oil hydrocarbon characterization approaches. This study reveals the forensic potential of using established petroleum characterization methods for characterizing materials with a petroleum-derived hydrocarbon element.     

裂解气相色谱-质谱法和红外光谱法对红色汽车油漆的比较分析

目的应用裂解气相色谱-质谱法（Py-GC/MS）和红外光谱法（IR）鉴别3种红色汽车油漆,通过二者的比较,考察Py-GC/MS法在微量物证油漆鉴定中的适用性。方法取适量固体样品直接检测。IR检测条件：红外显微镜,透射模式,光阑尺寸100μm×100μm,检测范围为4000-675cm-1。Py-GC/MS检测条件：裂解温度：550℃,裂解时间：0.20min。HP-5MS色谱柱,分流比80∶1;升温程序：起始温度为40℃,保持1 min,然后以8℃/min升至300℃,保持1 min。质谱采用EI源,扫描范围：29~350 amu。结果 3种红色汽车油漆的红外光谱、裂解图谱均能相互区分。通过裂解产物,能获得更多油漆主要成膜物质的成分信息。结论在样品量许可的条件下,应在红外光谱的检测基础上,进一步使用裂解气相色谱-质谱方法来对汽车油漆进行检测,通过互相验证,获得更准确、可靠的油漆鉴定结果。     

Analysis of pressure sensitive adhesive tape: I. Evaluation of infrared ATR accessory advances

Attenuated total reflection (ATR), also known as internal reflection spectroscopy (IRS), is a forensically accepted method for infrared (IR) analysis of pressure sensitive adhesive tapes. Advancements of ATR accessories in the last decade have provided the forensic examiner several ATR methods to choose from. These accessories offer a variety of ATR crystal choices with a variety of prices and capabilities. Four different types of pressure sensitive adhesive tapes including duct tape, electrical tape, packaging tape and office tape have been used to compare six different ATR methods. Each of the methods tested offers both benefits and limitaltions which must be considered for the type of sample to be analyze. The intent of this paper is to assist the reader in better understanding ATR techniques, the many differences among currently available ATR accessories and how the method is applied to the analysis of pressure sensitive adhesive tape.     

Raman identification of drug of abuse particles collected with colored and transparent tapes

Raman microscopy is a useful tool for the analysis of drug particles collected with adhesive tapes. In this work, first, the spectra of thirty drugs of abuse, degradation products, metabolites, and common cutting agent standards were recorded and the Raman bands observed were summarized providing the forensic analyst useful information for the identification of drug evidence. Then, the collection of different drug particles by a fingerprint lifting tape commonly used to remove and store fingerprints and fibers, and a white and green packaging tape, followed by the subsequent identification of the drugs by confocal Raman spectroscopy was performed. The particles were analyzed on top of the tapes, trapped between glass slides and the tapes, trapped in the tape folded over itself in the case of the transparent tape, and after folding and unfolding the tape in the case of the colored tape. The results obtained by the different approaches show that both tapes did not compromise the drugs spectra. However, the use of transparent tape is preferred because this tape allows the previous visual detection of the particles. Finally, several drug and sugar particles were spread over a clean table and inside a pocket, and the particles were collected with transparent tape and then properly identified. Although good results were obtained in both cases, the amount of fibers and other substances present in the collection area made the previous detection of the particles difficult and increases the analysis time.     

Analysis and discrimination of electrical tapes: part II. Backings

The backings of 90 black electrical tapes were analyzed to evaluate the chemical components of these films, the ability of individual techniques to discriminate samples, and the ability of the techniques combined to distinguish samples. The techniques utilized and their respective discrimination results were stereomicroscopy and physical measurements, to include observation of surface features of the backing, width, and thickness measurements (c. 64%); Fourier transform infrared spectroscopy (FTIR) using a microscope accessory (c. 83%); pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS; c. 81%); and scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS; c. 87%). Ninety-four percent of the backings were discriminated through this combination of analytical methods. Finally, evaluating these results in conjunction with previously published data on the analysis of the adhesives from the same set of electrical tapes provided an overall discrimination of nearly 96%.     

透明胶带的厚度检验

目的研究不同品牌透明胶带的区分方法。方法利用测厚仪对35种不同品牌透明胶带的厚度进行检验,并对所得数据进行统计分析。结果 35种品牌透明胶带组成的595组样品对中有458组可以区分,区分率为77.0%。结论厚度检验法能够在一定程度上区分不同品牌的透明胶带,厚度检验结果可与化学成分检验相互佐证,使得鉴定结论更加准确可靠,为法庭科学领域透明胶带物证的区分提供了一种预检验方法。     

Discrimination of paper-based kraft tapes using Fourier transform of transmitted light images

This study focused on two-dimensional fast Fourier transform (2D-FFT) as a new technique for the discrimination of kraft tapes, which is a kind of adhesive packing tape. The 2D power spectrum (2D-PS) obtained by applying 2D-FFT to an image enables us to obtain information about the spatial periodicity, even if the periodicity is invisible within the image. However, in the case of kraft tape, peaks in the 2D-PS are too unclear to determine its periodicity. We developed novel analytical image processes combined with 2D-FFT. 2D-FFT was applied to 50 randomly selected areas in a transmitted light image of kraft tape. The 2D-PSs were calculated from each area without applying a logarithmic transformation, accumulated, and processed by the removal of the area surrounding the center, and finally normalized for visualization. These processes enhanced the peaks and eliminated local variations. Through an intra-roll comparison, the 2D-PSs collected from a roll were similar in the location of the peaks and in their patterns at low frequency area. Using an inter-roll comparison, the 2D-PSs from 50 commercially available brand-name products were classified into 26 groups based on these peaks and patterns. All results demonstrate that this method, which is convenient, rapid, and non-destructive, could be a valuable tool for the identification of kraft tapes.     

Potential of soil organic matter molecular chemistry determined by pyrolysis-gas chromatography/mass spectrometry for forensic investigations

Wetlands near urban centers may be more isolated areas and can be chosen for the disposal of bodies or used as a crime scene. The predominant soils in these areas usually have a high content of organic matter (OM), classified as Histosols. Soil organic matter (SOM) is composed of many different compounds that can be identified by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). The study aimed to use Py-GC/MS to classify small amounts of organic soil in a forensic context. We sampled Histosols from five representative sites of Curitiba, Brazil. The molecular composition of the samples was determined by byPy-GC/MS. The factor analysis was carried out, and the factor scores showed a clear differentiation between the sites. Compounds indicative of relatively fresh plant material was separated from more recalcitrant and charred material. Py-GC/MS has the potential to be a useful tool to study the composition of SOM in Histosols to track the trace sample collected from a crime suspect.     

Selection of an adhesive tape suitable for forensic fiber sampling

Five commercial adhesive tapes were tested for fiber uptake and saturation, for recovery and for ease of analysis. On the basis of the results, a high tack adhesive tape has been selected to be used for forensic fiber sampling. This adhesive tape is used as sampling material in two different micro trace kits. The first tape lifting kit is used mainly for the sampling of cars and the second is a 1:1 tape lifting kit for the collection of fibers on a corpse.     

Discrimination of rubber-based pressure sensitive adhesives by size exclusion chromatography

In this report, three pairs of rubber-based pressure sensitive adhesives were analyzed by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS), attenuated total reflectance Fourier transform infrared spectrometry (ATR/FT-IR) and size exclusion chromatography (SEC). The size exclusion chromatograph was equipped with a refractive index (RI) detector and an ultraviolet (UV) absorption detector set to measure at 254 nm. Both adhesives of each pair revealed indistinguishable pyrograms and IR spectra, however, the SEC chromatograms were able to provide further discrimination. The differences were observed in the range below the polystyrene equivalent molecular weight of 700 Da.     

Adhesive tape analysis: establishing the evidential value of specific techniques

This study investigated the evidential value of specific methods of analysis for packaging tapes and clear adhesive tapes available in Australia. Fifty-eight adhesive tapes were analyzed using a wide range of optical, physical, and chemical techniques. The results were collated for the purpose of creating an Australian database of adhesive tapes, which would be of assistance in criminal investigation. Each technique was evaluated for its discriminating power, both for comparative purposes and for the identification of adhesive tapes by comparing unknown samples with the database. The combined discriminating power of the techniques applied is very high. It is possible to individually identify the source of an unknown adhesive tape sample in many instances by searching the database. It is also possible to form an opinion on the significance of a failure-to-discriminate result in comparative casework. Further work is still needed to expand and update the database, as well as compiling data on the relative market share of various products.     

Identification and Comparison of Electrical Tapes Using Instrumental and Statistical Techniques: II. Organic Composition of the Tape Backing and Adhesive*

Abstract: The microtexture and elemental composition of the backing of electrical tapes have been shown to be highly discriminating. In this study, the organic composition of electrical tape was evaluated as a complementary means of distinguishing tape brands. The backing and adhesive of 72 rolls of electrical tape were analyzed via Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR FTIR) and discriminant analysis was used to classify all samples by brand. Generally, the accuracy for FTIR data (88–99%) was higher than that for elemental data (86–94%). FTIR spectra from the adhesive layer were the most discriminating. In separate studies, two fragments of blast-damaged tape were correctly assigned to their brand of origin and discriminant analysis was used to quantitatively associate or exclude tape samples from two bombing cases.     

胶带粘面手印荧光显现剂的研发与应用

目的根据胶带粘面上潜在手印的特点,利用染料和潜手印的理化性质,研究开发胶带粘面手印荧光显现剂。方法在各种胶带粘面上显现潜在手印,并与常规的碳素墨水染色法进行比较。结果在长波紫外线照射下手印呈黄色明亮荧光,手印纹线清晰、连贯,基本不受手印遗留时间、客体表面颜色和性质的影响。结论胶带粘面上的汗潜手印和血潜手印用荧光显现剂显现效果优于碳素墨水染色法,在实际案件的侦破中有较好的应用前景。     

掺杂Cd的水溶性荧光ZnSe/MPA量子点显现胶带手印方法

目的探索水溶性荧光量子点溶液——掺杂镉的硒化锌（ZnxCd（1-x）Se）对胶带手印的显现方法。方法以巯基丙酸（MPA）为修饰剂合成了掺杂Cd的水溶性荧光ZnSe/MPA量子点,利用它显现水浸胶带及粘连胶带上的油汗指印,并在365nm下拍照成像。结果良好的显现出水浸胶带上的指印以及粘连胶带上的指印。与常规方法相比,优势更为明显。结论水溶性荧光量子点ZnxCd（1-x）Se溶液显出的指印纹线细腻流畅,在法庭科学领域具有很好的应用前景。     

Forensic utility of carbon isotope ratio variations in PVC tape backings

Forensic interest in adhesive tapes with polyvinyl chloride (PVC) backings (electrical tape) derives from their use in a variety of illicit activities. Due to the range of physical characteristics, chemical compositions, and homogeneity within a single roll of tape, traditional microscopic and chemical analyses can offer a high degree of discrimination between tapes, permitting the assessment of potential associations between evidentiary tape samples. The carbon isotope ratios of tapes could provide additional discrimination among tape samples. To evaluate whether carbon isotope ratios may be able to increase discrimination of electrical tapes, particularly with regards to different rolls of tape of the same product, we assessed the δ(13)C values of backings from 87 rolls of PVC-based black electrical tape (~20 brands, >60 products) Prior to analysis, adhesives were removed to prevent contamination by adhering debris, and plasticizers were extracted because of concern over their potential mobility. This result is consistent with each of these tapes having approximately the same plasticizer δ(13)C value and proportion of carbon in these plasticizers. The δ(13)C values of the 87 PVC tape backings ranged between -23.5 and -41.3 (‰, V-PDB), with negligible carbon isotopic variation within single rolls of tape, yet large variations among tape brands and tape products. Within this tape population, carbon isotope ratios permitted an average exclusion power of 93.7%, using a window of +/-0.3‰; the combination of carbon isotope ratio measurement with additional chemical and physical analyses raises the discrimination power to over 98.9%, with only 41 out of a possible 3741 pairs of tape samples being indistinguishable. There was a linear relationship between the δ(13)C value of tape backings and the change in δ(13)C value with the extraction of plasticizers. Analyses of pre- and post-blast tape sample pairs show that carbon isotope signatures are within 0.3‰ of pre-blast values, indicating that carbon isotope values are largely preserved during an explosion.     

Paint and tape: collection and storage of microtraces of paint in adhesive tape

The collection and preservation of microtrace evidence with the aid of an adhesive tape is a method of choice in forensic science. This technique is rapid and easy and allows the concentration of microtraces on a carrier, which facilitates further investigations in the laboratory. Adhesive tapes are currently used to secure microtraces of fibers and glass, but hardly for traces of automotive paint and other lacquers for fear of interference with the analysis of binders. A collection of automotive paint consisting of original and repair lacquers collected by tape has been evaluated. After various times of storage within the tape, these samples were compared with untreated references by microscope FT-IR and microspectrophotometry (MSP). Another set of paints was collected in 1984, stored within the tape until 1995, and examined the same way. About 170 layers of lacquer with various types of binder were examined. With the exception of one clear lacquer no difference between treated samples and references was detected. This small difference observed could be correlated to the exposure to xylene (extractant) and was not caused by the storage within the adhesive tape.     

Fingerprints and DNA: STR typing of DNA extracted from adhesive tape after processing for fingerprints

An exhibit that is often received for examination in cases of robbery or terrorist activity is adhesive tape. This type of exhibit can often, but not always, be successfully processed for fingerprints. The question arises whether or not it is possible to extract and type DNA after the tape has been sequentially processed for fingerprints. In this work, various donors left fingerprints on the adhesive side of tapes. The tapes were then sequentially processed for fingerprints using an alternate light source, cyanoacrylate fuming, and staining with BY-40 and then crystal violet. DNA was subsequently successfully extracted, amplified and typed for six STR loci.     

Analysis and discrimination of architectural paint samples via a population study

This study involved the comparative analysis and discrimination of 964 architectural paint samples collected in the United States and Canada. The samples were evaluated to determine the extent to which randomly collected architectural finishes can be discriminated following standard operating protocols for paint analysis. The study also provides a basis for assessing the significance of a result in which a pair or group are undifferentiated. The techniques utilized were stereomicroscopy, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) with both backscatter electron imaging (BSI) and energy dispersive spectroscopy (EDS), and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). To assess the layer characteristics (e.g., number, color, sequence, thickness), stereomicroscopy was used with FTIR and/or SEM as needed. The use of visual and microscopic evaluations in concert with FTIR resulted in 42 undifferentiated pairs, a discrimination of 99.99%. Adding SEM and Py-GC/MS analysis resulted in further discrimination of 31 pairs, resulting in eleven undiscriminated pairs of samples. At the conclusion of the study, samples that remained undifferentiated proved to originate from the same source. Therefore, no random pairs were indistinguishable at the conclusion of all examinations.     

Comparison of Different Swabs for Sampling Inorganic Gunshot Residue from Gunshot Wounds: Applicability and Reliability for the Determination of Firing Distance

This study concentrates on samples of bare pork skin, with and without bristles, and dried bovine ribs shot with a semi‐automatic pistol to find the best methodology and sampling surface in the search for inorganic gunshot residues (IGSR). Four quadrants of known surface areas were sampled at different distances from the bullet's hole with different swabs: tapes in graphite, Leukosilk® white tape, 3M® transparent tape, and a cotton swab to assess the technique able to collect the highest amounts of IGSR with the lowest contribution of the blank. The cotton swab wet in 10% HNO₃ gave the best results. The highest amounts of IGSR, measured by ICP‐OES and MS, were detected on a surface of 3‐cm radius from the bullet's edge. The amount of metals collected decreased with the firing distance between 20 and 60 cm. The procedure was efficient for sampling different tissues like skin and bones.