Fibres used in the construction of car seats — An assessment of evidential value

The evidential significance of car seat fibres has been investigated. Thirty six samples of car seat fabric were examined and the fibres catalogued according to their morphology and characteristics. The majority of car seat fibres were black or grey thick polyester fibres that were either dyed or pigmented. The MSP spectra produced were unlike those usually obtained from black or grey polyester fibres used in clothing. Tapings taken from car seats were examined for car seat fibres, various types were found showing that these fibres are expected to shed from the fabric albeit in low numbers, unless the vehicle is older. No fibres that matched the samples of the car seat fabric were found on the tapings of the car seats. One hundred garments were examined for car seat fibres, 10% of garments had populations of such fibres present and 41% had at least one car seat fibre present. None of these fibres matched the samples of the car seat fabric or those from the car seat tapings.     

A study in relation to the random distribution of four fibre types on clothing (incorporating a review of previous target fibre studies).

A new target fibre study was undertaken building upon eight previous published studies, which are reviewed here. Fifty-eight items of outer clothing, obtained from households across England, were taped and searched for three types of commonly occurring fibres and one less common fibre type. The tapes were examined using a combination of automatic and manual searching. Any fibres similar to the target fibres were removed and examined using microspectrophotometry, comparison microscopy, thin layer chromatography (TLC) and fourier transform infrared spectroscopy (FTIR) where applicable. One polyester fibre, four acrylic fibres and eleven wool fibres were found that matched the three commonly occurring target fibre samples. None of the less common polyester fibres were found. One item had six matching wool fibres and another had the polyester fibre and an acrylic fibre recovered from it. The remaining eight fibres were each recovered from individual items. The results suggest that finding a large number of fibres that match a control is unlikely to happen by chance, which supports the findings of the previous target fibre studies.     

Persistence of transferred fragrance on fabrics for forensic reconstruction applications

It has recently been established that volatile organic compounds (VOCs) successfully transfer between clothing even with a short contact of 10 s, highlighting the potential to use VOCs in forensic reconstruction scenarios, such as sexual assault cases. The mid and low volatility compounds transferred in greater amounts than high volatility compounds. This study presents empirical data addressing the persistence of transferred VOCs on clothing for the first time. A series of experiments were carried out to determine the persistence of VOCs on clothing for time periods of up 4 weeks, on natural and synthetic fibres, and at three different environmental temperatures. The data indicate that the highest VOC amounts are generally obtained for shorter persistence times of up to 1 d. Whilst high volatility compounds were not recovered in sufficient amounts to allow quantification, the four other transferred VOCs were successfully quantified for persistence times of up to 4 weeks. The persistence for mid-volatility compounds follows decay curve trends in line with those previously obtained for fibres, glass and pollen. When comparing the persistence of VOCs on a natural and a synthetic fibre, for a persistence time of 1 h, the transferred VOCs were retained on a natural fibre in higher amounts than on a synthetic fibre. However, for longer persistence times the concentration of VOCs was similar between the two fabrics. Lastly, lower environmental temperatures resulted in higher recoveries for most VOCs, especially for short persistence times. These findings demonstrate that optimal recovery of VOCs from clothing occurs when the fabric is kept at cooler temperatures and analysed soon after the fragrance transfer occurred, although VOC recovery was possible at higher temperatures and after longer persistence times. Given the transfer and persistence characteristics of VOCs from fragrance, there is potential for fragrance to be used as a form of trace in forensic reconstruction approaches.     

The kinetics of colour change in textiles and fibres treated with detergent solutions: Part II — Spectrophotometric measurements

The aim of this study was to assess colour variations that occur in several types of textiles and their constituent fibres, resulting from the long-term influence of various laundry detergents. A 14-day experiment was conducted using blue, red and grey/black cotton, wool, acrylic and polyester textiles. The spectrophotometric measurement of colour changes in fabric samples and test solutions, as well as the microspectrophotometric analysis of colour changes in single fibres were described. An evaluation of the observed colour changes from a forensic fibre analysis expert's point of view, as well as that of an average user/consumer of the textiles and laundry detergents is also provided.     

Assessment of PowerPlex® Fusion 5C’s ability to type degraded DNA

DNA samples collected at crime scenes are often degraded so this research focused on the ability of the Promega PowerPlex® Fusion 5C amplification kit to type both naturally and artificially degraded DNA.DNA was degraded naturally by placing equal volumes of blood on white fabric that was stored either inside, outside in a shaded area, or outside in direct sunlight. Samples were then collected every 10 days for 60 days and the DNA extracted (QIAamp® DNA Investigator). Artificially degraded samples were created by exposing extracted DNA to either UV light or 95 °C heat for varying times. DNA was also degraded artificially by placing blood samples into a 50% bleach solution for varying times prior to extraction.Following sample treatment, standard forensic DNA analysis was performed including quantification (Investigator® Quantiplex) and amplification (PowerPlex® Fusion 5C). Separation and detection were performed on an ABI 3130xl capillary electrophoresis unit and analysis was performed using GeneMapper ID v3.2.1.While the time and shade samples showed similar amounts of degradation, the samples exposed to direct sun showed more degradation. The artificially degraded samples showed more signs of degradation such as reduced overall peak height and peak height imbalance at heterozygous loci. There were also some cases where an allele that was known to be in the profile exhibited total dropout. Although there were some instances of both allelic dropout and heterozygote peak imbalance, PowerPlex® Fusion was able to reliably type degraded DNA as all alleles detected were consistent with the known donor profile. The results show that PowerPlex® Fusion is a robust kit capable of handling forensically challenged samples.     

A comparison of efficiency of manual and automatic fibres search with the Maxcan fibre finder

The aim of this work was to study the efficiency of automatic fibre searching with the Maxcan fibre finder (Cox Analytical Systems, Sweden) in comparison to manual searching. The influence of some parameters (color, thickness, background noise) on the results of a fibre search was considered. Eighteen experimental tapes with different target fibres and different background noises were prepared in the laboratory. Searching of fibres was performed manually and with the Maxcan fibre finder by different operators from four European laboratories. Two laboratories have the Maxcan fibre finder system and the two instruments were used and compared in this study. The results show that searching with the Maxcan is generally as efficient as manual searching, except for very pale or very dark fibres. Note that the tapes used for these experiments were prepared in laboratory, and are not completely representative of the tape that could be obtained in real cases. To generalize the results obtained, further research on real case samples would be necessary.     

A comparison of efficiency of manual and automatic fibres search with the Maxcan fibre finder

The aim of this work was to study the efficiency of automatic fibre searching with the Maxcan fibre finder (Cox Analytical Systems, Sweden) in comparison to manual searching. The influence of some parameters (color, thickness, background noise) on the results of a fibre search was considered. Eighteen experimental tapes with different target fibres and different background noises were prepared in the laboratory. Searching of fibres was performed manually and with the Maxcan fibre finder by different operators from four European laboratories. Two laboratories have the Maxcan fibre finder system and the two instruments were used and compared in this study. The results show that searching with the Maxcan is generally as efficient as manual searching, except for very pale or very dark fibres. Note that the tapes used for these experiments were prepared in laboratory, and are not completely representative of the tape that could be obtained in real cases. To generalize the results obtained, further research on real case samples would be necessary.     

Tearing of knicker fabrics

In Dunedin (South Island, New Zealand), a sexual assault is reported to police approximately once every two to three weeks, with some reports fictitious. Identifying a fictitious claim is difficult, and damage to apparel, especially knickers, may be the only form of evidence. In this paper, the tear behaviour of three knit fabrics, typical of those used to manufacture knickers is reported: the effect of laundering prior to tearing was considered. Tearing behaviour was determined using an Instron universal testing machine (Model 4464) operating in tensile mode to eliminate variability which is inevitable with human participants. Cotton and cotton-rich fabrics were more difficult to tear than modal-rich fabrics: the addition of elastane increased the time for the tear initiation as elastane fibres allowed the fabric to extend more before breaking. Specimens behaved differently depending on which direction they were torn (course-direction specimens down the length of the specimen, wale-direction specimens 50% down the length, 50% across the specimen). Laundered fabrics required less force to tear than new fabrics, therefore, when examining torn apparel, the fibre content and age of the garment need to be considered. Torn fibre ends appeared similar to those damaged by other means (e.g. knife, screwdriver) and no features visible under FESEM could be attributed solely to tearing damage in the fabrics studied.     

The biodegradation of the fabric of soldiers' uniforms.

A study to determine the changes in the morphological structure of woollen fabric and fibres of military uniforms, after burial in biologically active soil for a particular period of time. The analysis of fabric and fibres was performed by means of organoleptic and microscopic observations. The final decay of the fabric of soldiers' uniforms took place after 5-6 weeks burial in the standardised bioactive soil. The changes of the morphological structure of fabric undergoing the process of biodegradation depended mainly on the duration of their burial in the soil.     

A further study of dye batch variation in textile and carpet fibres.

Four sets of acrylic fibre samples were obtained from a company that dyes fabrics for the fashion industry. Between seven and ten different batches of fibres constituted each set. Comparison microscopy, visible and UV range microspectrophotometry and thin layer chromatography (TLC) were used to compare the dyes on each batch of fibres within the sets. Only one of the four sets exhibited variation within the batches. The differences were seen when both microscopical and analytical techniques were used. In addition, two further sets of samples had been obtained from a company that produces carpets for the car industry. The first set consisted of 26 batches of acid dyed orange nylon fibres. The second consisted of 21 batches of acid dyed mustard coloured nylon and direct dyed brown viscose fibres blended together. When the first set was viewed under UV light one batch had more pale orange fibres present and they fluoresced more brightly than the other fibres. This could be due to the blending with a different dye batch of fibre or due to poor dye uptake--the latter being more likely. When tested using visible and UV range microspectrophotometry and TLC, further dye batch variation was not detected. The second set was examined after separating the nylon and viscose fibres from each other. The nylon fibres were indistinguishable when a range of microscopical and analytical techniques were employed; however, the viscose fibres showed dye batch variation when TLC was used.     

The individuality of fibres used to provide forensic evidence--not all blue polyesters are the same.

Fibres used in forensic casework suffer from a disadvantage common to other forms of trace evidence--it is not possible to state with absolute certainty that they originate from a specific source. Target fibre studies, population studies and research on 'blocks of colour' have effectively demonstrated the polymorphism of textile fibres (particularly man-made ones) and have shown that when a fibre is believed to have a specific putative source, the chance that it has originated from a different source purely by coincidence is extremely remote. A study by Houck MM (Houck MM, Inter-comparison of unrelated fibre evidence. Forensic Science International 2003; 135: 146-149) has shown that no coincidental matching fibres were recovered from items of clothing examined in 20 unrelated crimes. The study involved over two million comparisons. This work goes a step further, and using the example of blue polyester fibres shows that even within a very narrow segment of the whole general fibre population, many examples of a specific colour/type of man-made fibre taken from random sources can be compared and the chance of any two being the same is very low. These studies should help to show the specificity and value of transferred fibres in providing forensic evidence.     

The population of coloured textile fibres in domestic washing machines.

A population survey was carried out to analyse examples of the coloured fibre population that may be expected to exist in both front- and top-loading domestic washing machines during Spring, in Sydney, Australia. White cotton T-shirts were washed both individually, and with a normal household wash load, then taped to recover extraneous fibres transferred during the wash cycle. Twelve thousand one hundred and seventy-eight fibres were classified according to length, colour and generic class. Cotton fibres were most prevalent (69.4%), followed by man-made fibres (24.2%). The most common colour/generic class combinations were black/grey cotton (27%), blue cotton (20%) and red cotton (15.6%). Other combinations generally represented under 2% of the total fibre population. Two thirds (65.9%) of the recovered fibres were under 2 mm in length, the proportion of fibres decreasing with increasing fibre length. Variations in machine type did not affect the distribution of fibres with respect to fibre type, colour or length.     

The persistence of fibres on skin in an outdoor deposition crime scene scenario

Textile fibres were transferred to a pig skin carcass and their persistence determined at daily intervals for up to a 12 day period during which time the carcass was left outdoors exposed to the prevailing weather conditions and animal activity. In the absence of strong winds and precipitation, the loss of fibres was found to be exponential. Stronger winds and heavier precipitation caused an increase in the rate of loss of fibres. The results of this study showed that the majority of fibres transferred to a body deposited outdoors, can be expected to be lost after the first 2 days, however, none of the experiments performed resulted in a complete loss of fibres, even after 12 days exposure. These persistence characteristics differed from those observed in a similar study using small sections of skin, rather than carcasses.The implications of the results of the present study in relation to the examination of fibre evidence in cases of homicide are discussed.     

An investigation into the use of calculating the first derivative of absorbance spectra as a tool for forensic fibre analysis.

A range of fibre samples was measured using J&M MSP400 and J&M MSP800 microspectrophotometers across the visible and UV/visible wavelength ranges respectively. The first derivative of the absorbance spectra was then calculated and studied. When the absorbance spectra produced for some samples were broad and featureless, the first derivative spectra provided more points of comparison that facilitated discrimination. For many of the samples, calculating the first derivative did not result in any additional discrimination due to the high number of points of comparison present in the absorbance spectra. However, for the samples that exhibited a high level of intra-sample colour variation (e.g. through uneven dye uptake common in cotton and wool, etc.), which was evident in the absorbance spectra, the associated first derivative spectra highlighted this variation between the fibres and could potentially have resulted in false exclusions. The results show that whilst calculating first derivative can be a useful aid in the comparison of spectra, a high degree of caution is required when applying this method to fibres which exhibit a large intra-sample variation in colour.     

Weather-induced changes in cannabinoid content of hair

Authentic hair samples from Cannabis users and a drug free hair sample which was separately spiked with tetrahydrocannabinol (THC), cannabidiol (CBD) or cannabinol (CBN) were exposed outside as well as to natural sunlight at prevailing and elevated humidity in quartz glass tubes during 8 weeks. In addition, authentic and spiked hair samples were exposed to xenon arc radiation in a light exposure cabinet for 24 hours. Stability of THC, CBD and CBN in authentic samples differed from that of the spiked hair. The radiation experiment revealed that CBN could not be measured in hair which had been spiked with THC. Under all conditions chosen the concentrations of THC, CBD and CBN decreased. At high humidity the concentrations declined more rapidly. In both authentic and spiked samples THC was most unstable compared to CBD and CBN. Therefore, in hair analysis determination of CBD and CBN seems promising to detect Cannabis exposure even under unfavorable conditions.     

The use of linear dichroism in forensic fibre examinations — Part 6. Validation and practical aspects of MSP-PPL

This paper summarizes the results of previous work on the microscopic observation of linear dichroism found in dyed fibres (polyesters, polyamides, wool, silk, cotton, viscose, acrylics and acetates) and in pigmented fibres as well as the measurements on these fibre classes using microspectrophotometry with plane polarized light (MSP-PPL). The validation of this method is discussed and a practical tool is proposed for comparing fibre traces with control fibres. The limitations and strengths of this method are also revised.     

Blocks of colour IV: the evidential value of blue and red cotton fibres.

Samples of blue and red cotton fibres were examined using light and fluorescence microscopy as well as UV/VIS microspectrophotometry and fluorescence microspectroscopy. The degree of fluorescence and spectral variation was recorded. Particular attention was paid to the recurrence of certain spectral patterns. The importance of spectral information in the UV range is emphasized again. Colour plays a critical role in the comparison of cotton fibres in forensic sciences. Normally, fibres producing spectral patterns that are frequently seen will tend to have a lower evidential value in criminal cases as the choice of putative sources is theoretically greater and vice versa. Besides black cotton, blue and red cotton fibres are very frequent in fibre casework. The very high discriminating power using a combination of light microscopy, fluorescence microscopy and UV/VIS microspectrophotometry shows that even blue and red cotton fibres can provide excellent evidence when involved in fibre transfer cases.     

Dichroism measurements in forensic fibre examination. Part 2 — Dyed polyamide, wool and silk fibres

A number of dyed polyamide, wool and silk samples were examined with plane polarized light on their dichroic behavior by optical light microscopy (OLM) and microspectrophotometry with plane polarized light (MSP-PPL). It was found that most of these acid dyed peptidic fibres possess dichroism, but these are weaker than the effects previously described for polyester fibres. The small effects may be not observed, especially for wool, but these can be measured using MSP-PPL.In the three peptidic fibre classes, for the first time, a so called “inverse dichroism” is observed which appears in the absorption spectra as a hyperchromic effect.     

The recovery of fibres from non-textile items using a static charge

This study investigated a new method of fibre recovery from non-textile items using polystyrene rods which have a static charge. A range of natural and man-made fibres were used on a number of substrates, including weapons, paper and plastic bags. The average recovery rate from all substrates was 99.1%. The effect of humidity on fibre recovery was also studied and it was found to reduce the ability of the rods to recover fibres. However this is unlikely to be an issue if recovery takes place in a forensic laboratory. It was concluded that the rods would prove a beneficial addition to the forensic laboratory as a relatively quick method of fibre recovery from non textile items where the standard method of recovery using tape lifts cannot be used.     

Raman spectroscopy and the forensic analysis of black/grey and blue cotton fibres Part 1: investigation of the effects of varying laser wavelength

Raman spectroscopy was investigated to determine the optimal conditions, mainly laser wavelength/s, for the analysis of the commonly encountered black/grey and blue cotton fibres dyed with reactive dyes. In this first part, a single blue cotton fibre, its three dye components, and an undyed cotton fibre were analysed with five different laser wavelengths from two different Raman microprobe spectrometers. The quality of the spectra, fibre degradation and speed of acquisition were used to determine that, under the conditions used, the 785 and 830 nm lasers gave superior results. The 632.8 nm laser wavelengths provided good results with little acquisition time and no spectral degradation. Results indicate that, at least, the major dye component could be identified using Raman spectroscopy.