Assessing a novel room temperature DNA storage medium for forensic biological samples

The ability to properly collect, analyze and preserve biological stains is important to preserving the integrity of forensic evidence. Stabilization of intact biological evidence in cells and the DNA extracts from them is particularly important since testing is generally not performed immediately following collection. Furthermore, retesting of stored DNA samples may be needed in casework for replicate testing, confirmation of results, and to accommodate future testing with new technologies.A novel room temperature DNA storage medium, SampleMatrix™ (SM; Biomatrica, Inc., San Diego, CA), was evaluated for stabilizing and protecting samples. Human genomic DNA samples at varying amounts (0.0625-200 ng) were stored dry in SM for 1 day to 1 year under varying conditions that included a typical ambient laboratory environment and also through successive freeze-thaw cycles (3 cycles). In addition, spiking of 1-4× SM into samples prior to analysis was performed to determine any inhibitory effects of SM. Quantification of recovered DNA following storage was determined by quantitative PCR or by agarose gel electrophoresis, and evaluation of quantitative peak height results from multiplex short tandem repeat (STR) analyses were performed to assess the efficacy of SM for preserving DNA.Results indicate no substantial differences between the quality of samples stored frozen in liquid and those samples maintained dry at ambient temperatures protected in SM. For long-term storage and the storage of low concentration samples, SM provided a significant advantage over freezer storage through higher DNA recovery. No detectable inhibition of amplification was observed at the recommended SM concentration and complete profiles were obtained from genomic DNA samples even in the presence of higher than recommended concentrations of the SM storage medium. The ability to stabilize and protect DNA from degradation at ambient temperatures for extended time periods could have tremendous impact in simplifying and improving sample storage conditions and requirements. The current work focuses on forensics analysis; however this technology is applicable to all endeavors requiring storage of DNA.     

Optimization and validation of a fast amplification protocol for AmpFlSTR Profiler Plus for rapid forensic human identification

The goal of this work was to optimize and validate a fast amplification protocol for the multiplex amplification of the STR loci included in AmpFlSTR^® Profiler Plus^® to expedite human DNA identification. By modifying the cycling conditions and by combining the use of a DNA polymerase optimized for high speed PCR (SpeedSTAR™ HS) and a more efficient thermal cycler instrument (Bio-RAD C1000™), we were able to reduce the amplification process from 4 h to 26 min. No modification to the commercial AmpFlSTR^® Profiler Plus^® primer mix was required. When compared to the current Royal Canadian Mounted Police (RCMP) amplification protocol, no differences with regards to specificity, sensitivity, heterozygote peak height ratios and overall profile balance were noted. Moreover, complete concordance was obtained with profiles previously generated with the standard amplification protocol and minor alleles in mixture samples were reliably typed. An increase in n − 4 stutter ratios (2.2% on average for all loci) was observed for profiles amplified with the fast protocol compared to the current procedure. Our results document the robustness of this rapid amplification protocol for STR profiling using the AmpFlSTR^® Profiler Plus^® primer set and demonstrate that comparable data can be obtained in substantially less time. This new approach could provide an alternative option to current multiplex STR typing amplification protocols in order to increase throughput or expedite time-sensitive cases.     

Evaluation of the use of freezer mill to improve DNA retrieval from dried cotton swabs

This investigation evaluated the use of a freezer mill to improve retrieval of DNA from dried cotton swabs (using 100 μl saliva) compared to uncrushed swabs and whole saliva by measuring DNA yield and profile average peak height. Three treatments were tested; short, medium (as for a bone sample) and extended. The samples subjected to the freezer mill had the powder that remained on the freezer mill components collected (using a water and agitation method). All freezer mill samples returned a lower average DNA yield than either uncrushed swabs or whole saliva. The powder from the crushed swabs comprised an average of 35% of the total DNA yield, whereas the powder from the components comprised 65%. Allele drop-out was observed in samples exposed to extended treatments. Both short and medium treatments provided significantly higher peak heights than uncrushed cotton swabs with equal quantities of DNA (P < 0.05). Using a freezer mill on dried cotton swabs does not increase the DNA yield. This investigation suggests collecting powder from the freezer mill components will increase DNA yield, especially from trace samples.     

Extended PCR conditions to reduce drop-out frequencies in low template STR typing including unequal mixtures

Forensic laboratories employ various approaches to obtain short tandem repeat (STR) profiles from minimal traces (<100 pg DNA input). Most approaches aim to sensitize DNA profiling by increasing the amplification level by a higher cycle number or enlarging the amount of PCR products analyzed during capillary electrophoresis. These methods have limitations when unequal mixtures are genotyped, since the major component will be over-amplified or over-loaded. This study explores an alternative strategy for improved detection of the minor components in low template (LT) DNA typing that may be better suited for the detection of the minor component in mixtures. The strategy increases the PCR amplification efficiency by extending the primer annealing time several folds. When the AmpF?STR^® Identifiler^® amplification parameters are changed to an annealing time of 20 min during all 28 cycles, the drop-out frequency is reduced for both pristine DNA and single or multiple donor mock case work samples. In addition, increased peak heights and slightly more drop-ins are observed while the heterozygous peak balance remains similar as with the conventional Identifiler protocol. By this extended protocol, full DNA profiles were obtained from only 12 sperm heads (which corresponds to 36 pg of DNA) that were collected by laser micro dissection. Notwithstanding the improved detection, allele drop-outs do persist, albeit in lower frequencies. Thus a LT interpretation strategy such as deducing consensus profiles from multiple independent amplifications is appropriate. The use of extended PCR conditions represents a general approach to improve detection of unequal mixtures as shown using four commercially available kits (AmpF?STR^® Identifiler, SEfiler Plus, NGM and Yfiler). The extended PCR protocol seems to amplify more of the molecules in LT samples during PCR, which results in a lower drop-out frequency.     

The analysis of biological samples from crime scene for a future human DNA profile confrontation. Effects of presumptive test reagents on the ability to obtain STR profiles for human identification

Because of the increase of evidence of blood stains, that have been washed or cleaned in an attempt to mask the analysis of DNA profiles, there is also an increase in the use of presumptive tests on samples sent to laboratories. Some of the presumptive tests, used to identify blood and semen stains, could potentially affect the recovery of high molecular weight DNA from the samples, or extinguish them, especially those already present in small quantities. After the presumptive tests, often these samples are discarded. This study aimed to examine the possibility of obtaining a DNA profile from samples submitted for presumptive testing and cleaned with bleaches with and without chlorine. Two different protocols were conducted: (a) A unique sample of human blood in natura (5 μL), already typed through the DNA techniques with the genetic profile previously known (control), was distributed onto cotton fabrics and dried at room temperature. Four samples of fabric were macerated in saline solution and Coombs serum and then stored for three months (room temperature and freezer −20 °C). (b) Another sample of human blood, type A, in natura, already typed through the techniques of DNA (control) was used. Aliquots of 200 μL were distributed in: cotton, denim and synthetic fabric. The samples were dried at room temperature for 24 h. The blood stains in those fabrics (cotton, denim and synthetic) were then divided into three groups: unwashed, cleaned with chlorine bleach and cleaned with chlorine bleach and soap powder. The samples were again dried at room temperature for 24 h, before the use of luminol. The DNA were extracted with Chelex 100 and amplified with the Identifiler Kit (Applied Biosystems). The blood stains exposed to saline and Coombs serum had DNA profiles consistent with untreated samples (controls). This result shows that the experts should keep and store the samples treated with saline and Coombs serum for future DNA confrontation when necessary. Also discussed in this paper the pattern of blood stains after washing with bleaching solutions, as well as the quantity of DNA obtained from these samples.     

The transfer of touch DNA from hands to glass, fabric and wood

The transfer of DNA from hands to objects by holding or touching has been examined in the past. The main purpose of this study was to examine the variation in the amount of DNA transferred from hands to glass, fabric and wood. The study involved 300 volunteers (100 for glass, 100 for fabric and 100 for wood) 50% of which were male and 50% female. The volunteers held the material for 60 s. The DNA was recovered from the objects using a minitape lift, quantified using the Quantifiler kit assay, extracted using a ‘Qiagen^® QIAamp DNA mini kit’ and amplified using the AmpFlSTR^® SGM Plus™ Amplification Kit at 28 cycles. The results show that using ANOVA there was a significant difference (F = 8.2, p < 0.05) between the three object types in the amount of DNA recovered. In terms of DNA transfer and recovery, wood gave the best yield, followed by fabric and then glass. The likelihood of success of obtaining a profile indicative of the holder was approximately 9% for glass samples, 23% for fabric and 36% for wood. There was no significant difference between the amount of DNA transferred by male or female volunteers. In this study good shedder status, as defined by obtaining useful profiles of 6 or more alleles, is estimated at approximately 22% of the population. The phenomenon of secondary transfer was observed when mixed DNA profiles were obtained but the incidence was low at approximately 10% of the total number of samples. DNA profiles corresponding to more than one person were found on objects which had been touched by only one volunteer. Although secondary transfer is possible the profiles obtained from touched objects are more likely to be as a result of primary transfer rather than a secondary source.     

Optimal storage conditions for highly dilute DNA samples: a role for trehalose as a preserving agent

DNA extraction from trace samples or noninvasively collected samples often results in the recovery of low concentration solutions of DNA that are prone to DNA degradation or other loss. Because of the difficulty in obtaining such samples, and their potentially high value in wildlife and forensic studies, it is critical that optimal methods are employed for their long-term storage. We assessed the amplification yield of samples kept under different storage conditions with the addition of potential preserving agents. We stored dilutions of known concentration human placental DNA, and gorilla fecal DNA, under four conditions (+4 degrees C, -20 degrees C, -80 degrees C, dry at room temperature), and with three additives (Tris EDTA (TE) buffer, Hind III digested Lambda DNA, trehalose). The effectiveness of the treatment methods was tested at regular intervals using qPCR to assess the quantity of amplifiable DNA, and a PCR assay of a larger 757 bp fragment to evaluate the quality of that remaining DNA. The highest quantity of DNA remained in samples stored at -80 degrees C, regardless of storage additives, and those dried at room temperature in the presence of trehalose. Surprisingly, DNA quality was best preserved in the presence of trehalose, either dried or at -80 degrees C; significant quality loss occurred with -20 degrees C and +4 degrees C storage.     

Cell free DNA as a component of forensic evidence recovered from touched surfaces

In the course of a criminal investigation, DNA is often recovered from items that have been handled by an individual. Whilst there have been studies investigating the propensity of different individuals to deposit DNA, little is known about the factors involved in the transference of DNA through touch. This investigation seeks to clarify some of the underlying processes involved in DNA transfer, as to better understand the significance of so-called “touch DNA” evidence (tDNA). It was shown that an average yield of 11.5 ng of DNA could be recovered from 1 mL cell-free sweat samples leading to the hypothesis that cell-free nucleic acids (CNAs) of a suitable length for standard DNA profiling are transferred during handling/touching items. A method of standardization of tDNA deposition was developed to overcome the significant sample to sample variability in DNA levels characteristic of tDNA samples. The glass bead method allowed the creation of identical tDNA sample sets, thus permitting direct comparisons to be made in the efficiency of various extraction methods. Extraction methods designed to optimize CNA recovery from touched articles resulted in comparable yields in a general population study, however the methods resulted in a twofold increase in DNA yields from touched items touched by individuals with sweaty hands. These results suggest that the CNA component of touched surfaces should be included to maximize profiling success of tDNA.     

Elimination rates of breath alcohol

Legal driving limits are set coequally with 0.5 g/L blood alcohol concentration (BAC) or 0.25 mg/L breath alcohol concentration (BrAC) in Austria as well as in other European countries. As mostly some time elapses between BrAC measurement and driving offence, a back calculation of alcohol concentrations is often required. The calculation of hourly BrAC elimination rates can thereby help to avoid unnecessary variances. A study with 59 participants was performed under social conditions. BrAC was determined with the legally accredited Alcotest 7110 MK III A every 30 min, and concomitantly venous blood samples were drawn. Five hundred and four BrAC/BAC value pairs were evaluated. The overall mean peak BrAC was calculated with 0.456 mg/L (±0.119 mg/L standard deviation). The mean hourly BrAC elimination rate was overall determined with 0.082 mg/L per h (0.050–0.114, 95% range). Mean rate of females (0.087 mg/L h⁻¹) and the according 95% limits were statistically significantly higher than of males (mean rate 0.078 mg/L h⁻¹, p < 0.04). Our results confirm the possibility to implement hourly BrAC elimination rates, provided that adequate statistical ranges and basic forensic scientific rules that have been set up for alcohol back calculations are observed.     

A multiplexed system for quantification of human DNA and human male DNA and detection of PCR inhibitors in biological samples

Forensic analysts routinely encounter samples containing DNA mixtures from male and female contributors. To obtain interpretable Short Tandem Repeat (STR) profiles and select the appropriate STR analysis methodology, it is desirable to determine relative quantities of male and female DNA, and detect PCR inhibitors. We describe a multiplex assay for simultaneous quantification of human and human male DNA using the ribonuclease P RNA component H1 (RPPH1) human target and the sex determining region Y (SRY) male-specific target. A synthetic oligonucleotide sequence was co-amplified as an internal PCR control. Standard curves were generated using human male genomic DNA. The SRY and RPPH1 assays demonstrated human specificity with minimal cross-reactivity to DNA from other species. Reproducible DNA concentrations were obtained within a range of 0.023-50 ng/μl. The assay was highly sensitive, detecting as little as 25 pg/μl of human male DNA in the presence of a thousand-fold excess of human female DNA. The ability of the assay to predict PCR inhibition was demonstrated by shifted IPC Ct values in the presence of increasing quantities of hematin and humic acid. We also demonstrate the correlation between the multiplex assay quantification results and the strength of STR profiles generated using the AmpF?STR^®PCR Amplification kits.     

Validation of a 17-locus Y-STR multiplex system

Internal validation of a commercial 17-locus Y-STR system (AmpFlSTR^® Yfiler™, Applied Biosystems) has been performed on the ABI PRISM^® 3130 Genetic Analyzer for use in forensic cases. The Yfiler™ kit was validated according to SWGDAM guidelines. Our results show that it is possible to obtain full profiles with as little as 30 pg of male DNA even in the presence of 20,000-fold amounts of female DNA. Reaction volume was optimized for 10 μl. Male-male mixtures yielded full profiles of the minor contributor with 10-fold excess of the major contributor. Stutter values for each locus were determined from data generated for the population study which included Y-STR profiles from 156 caucasian males from the Montreal and Lac St.-Jean areas of Québec, Canada. The study recorded 141 different haplotypes of which 131 were unique with a haplotype diversity of 0.9965. A number of non-probative forensic samples from rape kit epithelial fractions and fingernail scrapings were also successfully tested.     

Effect of storage conditions on restriction fragment length polymorphism (RFLP) analysis of deoxyribonucleic acid (DNA) bound to positively charged nylon membranes.

The ability to generate an autoradiogram from deoxyribonucleic acid (DNA) immobilized on a positively charged nylon membrane could be compromised by the storage conditions of the membrane. HaeIII-digested human DNA was size fractionated and transferred to two types of positively charged nylon membranes. The membranes were stored at -20 degrees C, 4 degrees C, and ambient temperature and humidity for times ranging from 1 day to 13 weeks, then hybridized to variable number of tandem repeat (VNTR) probes to examine the effect of the storage conditions on the membrane-bound DNAs. It was shown that such membranes could be successfully hybridized and rehybridized if they were stored at -20 or 4 degrees C, but storage under ambient conditions reduced or eliminated the likelihood of successful hybridization.     

AmpFlSTR Profiler Plus and AmpFlSTR COfiler analysis of tissues stored in GenoFix, a new tissue preservation solution for mass disaster DNA identification

A preliminary study was conducted to assess the capability of a new alcohol-based tissue fixative, GenoFix, to preserve DNA from biopsy tissues stored at room temperature and/or -20 degrees C in a freezer, for subsequent short tandem repeat (STR) DNA typing analysis. Fresh human smooth muscle samples were stored at room temperature in GenoFix for one month and up to one year and seven months before being processed using the megaplex STR systems, AmpFlSTR Profiler Plus and AmpFlSTR COfiler. Alternatively, muscle tissues in GenoFix were placed at -20 degrees C in a freezer for up to 3 1/2 years following two to three months in the fixative at room temperature. DNA analysis was also carried out on tissues stored in GenoFix for one month at room temperature and subsequently paraffin-embedded and stored at room temperature for four years. The AmpFlSTR Profiler Plus and AmpFlSTR COfiler STR profiles produced, using DNA extracted from all fixed tissue samples, were of very good quality. The fluorescent signals were well balanced across the nine STR loci or six loci comprised in the megaplexes surveyed and profiles showed no differences with those observed for the control blood of the respective donor patients. Continuous exposure to GenoFix at room temperature (up to one year and seven months) did not compromise the STR typing analysis of the fixed tissues. No adverse effects were noted on the STR typeability of tissues fixed with GenoFix and stored at -20 degrees C in a freezer for up to 3 1/2 years. STR profiles generated from the paraffin-embedded tissues fixed in GenoFix were of excellent quality. This preliminary study suggests that GenoFix can be used to store tissue samples at room temperature for up to one year and seven months or at -20 degrees C in a freezer for longer storage (up to 3 1/2 years). This new and odorless tissue fixative promotes tissue and DNA preservation in a very effective manner and as such may prove useful in criminal investigations or mass disaster identifications carried out in remote locations and in which a small or large number of tissue samples are collected for further analyses.     

Characterization of deoxyribonucleic acid (DNA) obtained from teeth subjected to various environmental conditions.

This study was designed to determine the effects of various environmental factors on the deoxyribonucleic acid (DNA) obtained from dental pulp. Extracted teeth were subjected to the following conditions: varying pH (3,7,10); temperature (4 degrees C, 25 degrees C, 37 degrees C, incineration); humidity (20%, 66%, 98%); various types of soil (sand, potting soil, garden soil); seawater; burying the teeth outdoors, and aging (one week to six months). In addition, teeth that had been extracted and held at room temperature for 16 and 19 years were also examined. Following isolation of DNA, the samples were analyzed on yield gels to determine the concentration and integrity of the recovered DNA. Restriction digestion with Pst I was followed by electrophoresis of the generated fragments, Southern transfer to nylon membranes, and hybridization to both human and bacterial probes. It was determined that, aside from soil, the environmental conditions examined did not affect the ability to obtain high-molecular-weight human DNA from dental pulp. Restriction fragment length polymorphic (RFLP) analysis of selected samples was performed. Dental pulp patterns were compared with bloodstain exemplars, revealing matching patterns, although an increase in band-shifting was observed with extended exposure to elevated temperatures.     

High-throughput DNA sequencing of environmentally insulted latent fingerprints after visualization with nanoscale columnar-thin-film technique

The goals of this study were to (a) ascertain human identity capabilities of DNA obtained from latent fingerprints that have been first environmentally insulted and then developed by the deposition of a columnar thin film (CTF), and (b) to determine if the CTF process and material are detrimental to single nucleotide polymorphism (SNP) analysis. Fingerprints were deposited on five different types of substrates and aged for one day, 7 days or 30 days while being environmentally insulted under one of the four conditions: 16.6 °C and 60% relative humidity (RH) (Condition A), 24.5 °C and 60% RH (Condition B), 35 °C and 67% RH (Condition C) and a cold condition (Condition D). Then CTF technique was then on 59% of these fingerprints. DNA samples from 805 fingerprints were extracted, quantified, subjected to manual library preparation using the Precision ID Identity Panel, and underwent high-throughput sequencing. The Ion S5™ platform was employed to sequence 124 SNP amplicons. SNPs were successfully sequenced from 802/805 samples. Total read depth was consistent across environmental conditions, and majority of samples had 100% profile completeness and 100% concordance. Anecdotally, libraries that were amplified with a higher cycle number had more ‘Major Allele Frequency’ flags compared to samples amplified with 23 cycle numbers, possibly due to stochastic effects. Neither the substrates nor the CTF process and materials inhibit downstream DNA analysis. DNA of low quality and quantity from the chosen samples can be sequenced using the Precision ID Identity Panel on the Ion S5™ platform which performed well, however, a different approach may be needed if spurious alleles are suspected.     

Fast PCR amplification of AmpFlSTR Identifiler

To increase throughput for DNA typing, we examined fast PCR cycling using AmpFlSTR Identifiler by three methods. In this study, we reduced PCR running times by 1/3 to 2/3 (approximately 1-2 h). This means DNA typing, including PCR reactions, can be completed within a timeframe ranging from 90 min to 2 h and 30 min.     

Evaluation of deoxyribonucleic acid (DNA) isolated from human bloodstains exposed to ultraviolet light, heat, humidity, and soil contamination

This study was designed to analyze the effects of common environmental insults on the ability to obtain deoxyribonucleic acid (DNA) restriction fragment-length polymorphisms (RFLP) patterns from laboratory prepared specimens. The environmental conditions studied include the exposure of dried bloodstains to varying amounts of relative humidity (0, 33, 67, and 98%), heat (37 degrees C), and ultraviolet light for periods of up to five days. In addition, the effect of drying over a four-day period in whole blood collected with and without ethylenediaminetetraacetate (EDTA) was examined. The results of the study showed that, under the conditions studied, the integrity of DNA is not altered such that false RFLP patterns are obtained. The only effect observed was that the overall RFLP pattern becomes weaker, but individual RFLP fragments are neither created nor destroyed.     

RNA/DNA co-analysis from blood stains—Results of a second collaborative EDNAP exercise

A second collaborative exercise on RNA/DNA co-analysis for body fluid identification and STR profiling was organized by the European DNA Profiling Group (EDNAP). Six human blood stains, two blood dilution series (5-0.001 μl blood) and, optionally, bona fide or mock casework samples of human or non-human origin were analyzed by the participating laboratories using a RNA/DNA co-extraction or solely RNA extraction method. Two novel mRNA multiplexes were used for the identification of blood: a highly sensitive duplex (HBA, HBB) and a moderately sensitive pentaplex (ALAS2, CD3G, ANK1, SPTB and PBGD). The laboratories used different chemistries and instrumentation. All of the 18 participating laboratories were able to successfully isolate and detect mRNA in dried blood stains. Thirteen laboratories simultaneously extracted RNA and DNA from individual stains and were able to utilize mRNA profiling to confirm the presence of blood and to obtain autosomal STR profiles from the blood stain donors. The positive identification of blood and good quality DNA profiles were also obtained from old and compromised casework samples. The method proved to be reproducible and sensitive using different analysis strategies. The results of this collaborative exercise involving a RNA/DNA co-extraction strategy support the potential use of an mRNA based system for the identification of blood in forensic casework that is compatible with current DNA analysis methodology.     

It's not the time they spend, it's what they do: The interaction between delinquent friends and unstructured routine activity on delinquency : Findings from two countries

This study examines whether having delinquent friends interacts with other peer-related variables in the explanation of adolescent offending. We hypothesise that the relationship between delinquent friends and offending might be conditioned by the effect of (1) how much time they spend with their friends, (2) how much time they spend in unstructured routine activities and (3) their emotional relationship with their friends. To test these three hypotheses we use data from two independent samples of young adolescents in Halmstad, Sweden (N = 1,003) and in Cologne and Freiburg, Germany (N = 955). The results found strong support that the effect of delinquent friends on adolescent offending is conditional on the level of time they spend in unstructured routine activities. This indicates that delinquent friends have a stronger effect on offending for adolescents who often spend their free time in unstructured routine activities.     

Development and usage of a NIST standard reference material for real time PCR quantitation of human DNA

National Institute of Standards and Technology SRM 2372 human DNA quantitation standard has been produced to support the need for a human-specific DNA quantitation standard in forensic casework and calibration of new quantitative polymerase chain reaction (qPCR) assays. The conventional DNA concentration has been assigned with one of the U.S. National Reference UV/Visible Spectrophotometers, assuming an absorbance of 1.0 at 260 nm equals 50 ng/μL of double stranded DNA. In addition, an interlaboratory study has been conducted, to verify that the SRM 2372 materials perform well in currently used DNA quantitation assays by the forensic DNA community. Each unit of SRM 2372 consists of three well-characterized DNA extracts. Component A is a single-source human male material derived from blood. Component B is a multiple-source human female material derived from blood. Component C was purchased as a purified unsheared genomic human DNA (Sigma-Aldrich Co., St. Louis, MO) obtained as a lyophilized human genomic extract and has both male and female donors. SRM 2372 is intended to enable the comparison of DNA concentration measurements across time and place. Manufacturers can use SRM 2372 to validate the values assigned to their own reference materials. Individual forensic laboratories can use SRM 2372 to validate DNA quantitation methods and to verify the assigned concentration of in-house or commercial DNA calibration standards.