The use of liquid latex as a pre-treatment to recover debris-covered latent fingerprints from exterior surfaces of vehicles

This study evaluated the effectiveness of using liquid latex as a pre-treatment for fingerprint recovery from the exterior surfaces of vehicles in summer. The sample of this study was 540 sebaceous latent fingerprints deposited on the lower body of three vehicles. Thirty control and thirty experimental fingerprints were deposited on each vehicle, and the experiment was repeated three times. The three vehicles were driven daily for either 2, 3, or 4 weeks after the deposition of fingerprints. After the vehicles reached their designated debris accumulation duration, the latent fingerprints in the control groups were developed with black fingerprint powder. Liquid latex was applied onto the fingerprints in the experimental groups, and they were subsequently developed with black fingerprint powder. A chi-sure test indicated that there was a significant difference in fingerprints recovery performance between two methods (X² = 4.903, d.f. = 1, p = 0.027). An odds ratio test indicated the control method increases the probability of fingerprint recovery by 1.54 times. A Fisher's exact test was used to evaluate the quality of fingerprints recovered from both methods and it indicated that there is no significant difference in quality using the two methods (p = 0.058). This study indicated that the traditional fingerprint powder method performed better for fingerprint recovery from exterior surfaces of vehicles in summer.     

DNA recovery after sequential processing of latent fingerprints on copy paper

Forensic examiners must determine whether both latent fingerprint development and DNA profiling can be performed on the same area of an evidence item and, if only one is possible, which examination offers the best chance for identification. Latent fingerprints can be enhanced by targeting different components of fingerprint residues with sequential chemical treatments. This study investigated the effects of single-reagent and sequential latent fingerprint development processes on downstream DNA analysis to determine the point at which latent fingerprint development should be stopped to allow for DNA recovery. Latent fingerprints deposited on copy paper by one donor were developed using three sequential processes: 1,8-diazafluoren-9-one (DFO) → ninhydrin → physical developer (PD); 1,2-indanedione-zinc (IND-Zn) → ninhydrin → PD; and IND-Zn → ninhydrin → Oil Red O (ORO) → PD. Samples were examined after the addition of each chemical treatment. DNA was collected with cotton swabs, extracted, quantified, and amplified. DNA yields, peak heights, number of alleles obtained, and percentage of DNA profiles eligible for CODIS upload were examined. DNA profiles were obtained with varying degrees of success, depending on the number and type of treatments used for latent fingerprint development. The treatments that were found to be the least harmful to downstream DNA analysis were IND-Zn and IND-Zn/laser, and the most detrimental treatments were DFO, DFO/laser, and PD. In general, as the number of treatments increase, the opportunities for DNA loss or damage also increase, and it is preferable to use fewer treatments when developing latent fingerprints prior to downstream DNA processing.     

The Use of Liquid Latex for Soot Removal from Fire Scenes and Attempted Fingerprint Development with Ninhydrin*

Abstract: Throughout the United States, clearance rates for arson cases remain low due to fire’s destructive nature, subsequent suppression, and a misconception by investigators that no forensic evidence remains. Recent research shows that fire scenes can yield fingerprints if soot layers are removed prior to using available fingerprinting processes. An experiment applying liquid latex to sooted surfaces was conducted to assess its potential to remove soot and yield fingerprints after the dried latex was peeled. Latent fingerprints were applied to glass and drywall surfaces, sooted in a controlled burn, and cooled. Liquid latex was sprayed on, dried, and peeled. Results yielded usable prints within the soot prior to removal techniques, but no further fingerprint enhancement was noted with Ninhydrin. Field studies using liquid latex will be continued by the (US) Virginia Fire Marshal Academy but it appears that liquid latex application is a suitable soot removal method for forensic applications.     

Microwave Selective Thermal Development of Latent Fingerprints on Porous Surfaces: Potentialities of the Method and Preliminary Experimental Results

The thermal development of latent fingerprints on paper surfaces is a simple, safe, and chemicals‐free method, based on the faster heating of the substrate underlying the print residue. Microwave heating is proposed for the first time for the development of latent fingerprints on cellulose‐based substrate, in order to add to the thermal development mechanism the further characteristic of being able to heat the fingerprint residues to a different extent with respect to the substrate, due to the intrinsic difference in their dielectric properties. Numerical simulation was performed to confirm and highlight the selectivity of microwaves, and preliminary experimental results point out the great potentialities of this technique, which allowed developing both latent sebaceous‐rich and latent eccrine‐rich fingerprints on different porous surfaces, in less than 30 sec time with an applied output power of 500 W. Microwaves demonstrated more effectiveness in the development of eccrine‐rich residues, aged up to 12 weeks.     

Lifting techniques for finger marks on human skin previous enhancement by Swedish Black powder — A preliminary study

An examination was done to investigate whether certain lifting techniques can lift recovered latent fingerprints on human skin surfaces of living subjects. For recovery Swedish Soot powder mixture (Swedish Black) was used.Donors intentionally placed fingerprints on the skin surface of living subjects. Finger marks were then in all cases recovered with Swedish Black powder. The procedure was repeated after 1 h and 4 h. Treated finger marks were secured and preserved as latent fingerprint evidence by different lifting processes. Having examined skin surfaces and finger marks we observed that the lifters such as white instant lifter, white fingerprint gelatin, black fingerprint gelatin, silicone, transparent adhesive tape, are suitable. Moreover, white fingerprint gelatin and white instant lifter proved to be very good at lifting treated finger marks. Black fingerprint gelatin was very good also, but finger marks were examined by slant light.     

A Modified Electrostatic Adsorption Apparatus for Latent Fingerprint Development on Unfired Cartridge Cases

Visualization of latent fingerprints on metallic surfaces by the method of applying electrostatic charging and adsorption is considered as a promising chemical‐free method, which has the merit of nondestruction, and is considered to be effective for some difficult situations such as aged fingerprint deposits or those exposed to environmental extremes. In fact, a portable electrostatic generator can be easily accessible in a local forensic technology laboratory, which is already widely used in the visualization of footwear impressions. In this study, a modified version of this electrostatic apparatus is proposed for latent fingerprint development and has shown great potential in visualizing fingerprints on metallic surfaces such as cartridge cases. Results indicate that this experimental arrangement can successfully develop aged latent fingerprints on metal surfaces, and we demonstrate its effectiveness compared with existing conventional fingerprint recovery methods.     

利用CdSe巯基乙酸溶液显现水浸客体表面潜手印

目的研究水浸客体表面潜指纹的显现方法;方法利用CdSe巯基乙酸溶液显现被水浸泡过的黄色封箱胶带、黑色塑料袋、玻璃等常见非渗透性客体上的潜手印,讨论影响水浸非渗透性客体上潜手印显现效果的各种因素,并与传统方法进行比较,初步探讨了CdSe巯基乙酸溶液显现水浸非渗透性客体表面潜手印的方法;结果使用巯基乙酸包覆CdSe纳米复合材料显现潜在手印,使每分子纳米复合材料外表包覆足够数量的羧基,则可以提高它同手印残留物的结合能力,从而得到更高清晰度、更高分辨率的手印显像;结论巯基乙酸包覆CdSe纳米复合材料可以很好的显现水浸塑料、胶带等表面潜指纹。     

Characterization of children's latent fingerprint residues by infrared microspectroscopy: forensic implications

The chemistry of children's latent fingerprint residues was investigated as a function of time and temperature by non-destructive spectrochemical analysis. Latent fingerprints from children, ranging in age from 2 to 11 years, were deposited onto aluminum-coated glass slides and were analyzed by Fourier-Transform Infrared Microspectroscopy. The results revealed that there are three major classes of compounds present in children's latent fingerprints: carboxylic acid salts, proteins, and esters. By studying the changes in the fingerprint residues as a function of time and at elevated temperatures, we discovered that the salts in the fingerprint residues are stable relative to the esters. These findings have relevant forensic implications; by targeting the acid salts instead of the esters or proteins, children's latent fingerprints may be recovered after extended periods of time have elapsed.     

An Investigation into the Effects of Force Applied During Deposition on Latent Fingermarks and Inked Fingerprints Using a Variable Force Fingerprint Sampler

Physical factors, including the magnitude of the force applied during fingermark deposition, may affect friction ridge surface area and clarity, and the quantity of residue transferred. Consistency between fingermarks may be required; for example, in research projects, yet differences between marks are likely to exist when physical factors are not controlled. Inked fingerprints and latent fingermarks were deposited at 1–10 N at 1 N increments using a variable force fingerprint sampler to control the force, angle of friction ridge and surface contact, and the duration of friction ridge and surface contact. Statistically significant differences existed between the length and width measurements of the inked prints (p ≤ 0.05), particularly at lower forces. Scanning electron microscopy and surface plot analysis demonstrated how differences in force applied during deposition affected ridge surface area, displacement of latent residue, and differences in the quantity of residue transferred. Consistency between inked prints was demonstrated at equivalent forces.     

Development of Latent Fingerprints on Thermal Paper by the Controlled Application of Heat

Apparatus to produce a spatially and temporally uniform heat source is described and this is used to visualize latent fingerprints deposited onto thermal paper by raising the temperature of the paper. Results show an improvement over previous research when fingerprint deposits are aged or the developed fingerprints faint; visualization being enhanced by the use of a blue LED light source of 465 nm peak wavelength. An investigation of the components in fingerprint sweat likely to affect the solubility and hence color change of the dye present in the thermal paper has shown that polar protic solvents able to donate a proton are favored and a polar amino acid found commonly in eccrine fingerprint sweat (lysine) has been shown able to produce the desired color change. Aged fingerprint deposits on thermal paper from a variety of sources up to 4 years old have been visualized with this technique.     

Error Rates,Likelihood Ratios,and Jury Evaluation of Forensic Evidence

Forensic examiners regularly testify in criminal cases, informing the jurors whether crime scene evidence likely came from a source. In this study, we examine the impact of providing jurors with testimony further qualified by error rates and likelihood ratios, for expert testimony concerning two forensic disciplines: commonly used fingerprint comparison evidence and a novel technique involving voice comparison. Our method involved surveying mock jurors in Amazon Mechanical Turk (N = 897 laypeople) using written testimony and judicial instructions. Participants were more skeptical of voice analysis and generated fewer “guilty” decisions than for fingerprint analysis (B = 2.00, OR = 7.06, p = <0.000). We found that error rate information most strongly decreased “guilty” votes relative to no qualifying information for participants who heard fingerprint evidence (but not those that heard voice analysis evidence; B = −1.16, OR = 0.32, p = 0.007). We also found that error rates and conclusion types led to a greater decrease on “guilty” votes for fingerprint evidence than voice evidence (B = 1.44, OR = 4.23, p = 0.021). We conclude that these results suggest jurors adjust the weight placed on forensic evidence depending on their prior views about its reliability. Future research should develop testimony and judicial instructions that can better inform jurors of the strengths and limitations of forensic evidence.     

Determining the order of deposition of natural latent fingerprints and laser printed ink using chemical mapping with secondary ion mass spectrometry

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) chemical mapping was used to investigate the order of deposition of natural latent fingerprints and laser printed ink on paper. This feasibility study shows that sodium, potassium and C₃H₅ positive ions were particularly abundant endogenous components of the natural fingerprints and also present in the paper examined, but were mostly absent in the laser printed ink. Mapping of these ions enables the observation of friction ridges from latent prints on the ink surface, only when a fingerprint was deposited above the layer of ink. As a demonstration of proof of concept, blind testing of 21 samples from three donors resulted in a 100% success rate. The sensitivity of this technique was investigated within this trial through the examination of up to fifth depletion fingerprints and ageing of up to 28 days. Migration of fingerprint and paper components to the ink surface, although observed with increased ageing time, was not found to compromise determination of the deposition sequence.     

暗视场照明与分色照相配合显现指印

目的研究彩色光滑客体上指印的显现方法。方法用暗视场照明和分色照相配合的方法对4种彩色木板上指印进行了显现。结果实验结果表明了暗视场照明和分色照相方法能够有效显现出彩色光滑客体上的潜在指印。结论拓宽了暗视场照明显现指印的范围,同时为彩色光滑客体上指印的显现提供了一种新的方法。     

Enhancing the quality of aged latent fingerprints developed by superglue fuming: loss and replenishment of initiator

The recovery and identification of latent fingerprints from a crime scene are crucial to many investigations. The cyanoacrylate (superglue) fuming method (CFM), which develops fingerprints by growing a polymer coating over the print residue, is a powerful method but encounters severe limitations when prints are aged or exposed to harsh environmental conditions. We examine the aging process and how the changes that occur to a fingerprint residue over time influence the growth of polymer during development. We identify loss of initiator by erosion and degradation that, when coupled with a loss of water from the print residue, result in a decreased ability to polymerize ethylcyanoacrylate. Then, we present a methodology by which the ability of aged latent fingerprints to polymerize ethylcyanoacrylate is recovered. Two print enhancement agents, acetic acid and ammonia, are demonstrated to improve the growth of polymer from the print ridges by over an order of magnitude, while retaining the integrity of the print structure. Comparison between the two enhancement agents indicate that the enhancement occurs due to ridge coating by the ammonia or acetic acid and pH control of the latent print.     

The spectroscopic detection of exogenous material in fingerprints after development with powders and recovery with adhesive lifters

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. The powders adhere to the ridge pattern of the fingerprint only, thus allowing the image to be visualised. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes to facilitate subsequent laboratory analysis. As with all recovered evidence these samples would be stored in evidence bags to allow secure transit from the scene to the laboratory and also to preserve the chain of evidence. In this paper, the application of Raman spectroscopy for the analysis of exogenous material in latent fingerprints is reported for contaminated fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. A selection of over the counter (OTC) analgesics were used as samples for the analysis and contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. In most cases background fluorescence attributed to the sebaceous content of the latent fingerprint was reduced by the application of the powder thus reducing spectral interference. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis of exogenous contaminants by Raman spectroscopy. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised in any way. Although the application of powders did not interfere with the detection process the time taken to locate the contaminant was increased due to the physical presence of more material within the fingerprint. The presence of interfering Raman bands from lifting tapes is another potential complication. This, however, could be removed by spectral subtraction or by the choice of lifting tapes that have only weak Raman bands.     

Aging studies on fingerprint residues using thin-layer and high performance liquid chromatography

The chemical substances of perspiration found in latent fingerprint residue may hold the key for dating latent fingerprints. To study the chemical transformations of these components as a function of time and environment, fingerprint residues from four males and four females were analysed by thin-layer chromatography (TLC) and high performance liquid chromatography (HPLC). Three major and two or three minor components were detected by both methods and the variation in the quantity of the major components with time was observed.     

A Noninvasive and Speculative Method of Visualizing Latent Fingerprint Deposits on Thermal Paper

Latent fingerprint deposits on thermal paper have been visualized noninvasively at visible wavelengths when illuminated with a UV‐A light source (peak 365 nm). A higher intensity UV source (250 W/m² at 0.38 m) gave superior fingerprint visibility when compared with a 60 W/m² (at 0.4 m) source. Removing the visible (blue) component of the light source emission did not adversely affect the visibility of the fingerprint. Sample fingerprints from 100 donors, when examined 24 h after deposition, produced identifiable fingerprints from nearly 34% of fingerprint deposits. A mechanism for the observed visibility is proposed based on low emission of visible wavelengths from areas of thermal paper coincident with the fingerprint deposit, when illuminated with UV. This is likely due to a weak color change in the thermal paper dye arising from protonated amino acid components of the sweat. This effect was not observed on nonthermal paper.     

Use of nitrogen cryogun for separating duct tape and recovery of latent fingerprints with a powder suspension method

Duct tape is sometimes recovered as physical evidence in crimes. The purpose of this study was to determine the quality of latent prints on the adhesive and non-adhesive surfaces of duct tape samples that were separated using three methods. Three hundred donor fingerprint impressions were deposited on duct tape. Sections of duct tape were affixed to sections of cardboard and a fingerprint placed on the non-adhesive surface of the tape. A second layer of duct tape was prepared and a fingerprint placed on the adhesive side of the tape and then the tape was affixed to the piece of tape on the cardboard. After a 24-h period, the samples were separated using gradual force, liquid nitrogen applied with a cryogun and an adhesive neutralizer to separate the layers of tape. The recovered fingerprints were processed with a fingerprint powder suspension method. The recovered fingerprint images were evaluated and rated as +1, +2, or +3. The liquid nitrogen spray separation method yielded the highest number of +3 prints.     

指甲花醌显现纸张上汗潜手印初步研究

目的介绍一种用天然植物提取成分指甲花醌显现渗透性纸张表面汗潜手印的方法。方法利用指甲花醌能够和手印遗留物质中的氨基酸发生显色反应来显现手印。结果显现出的手印纹线在自然光下观察呈紫褐色,并且在540nm激发光源条件下,通过红色护目镜观察还有很强的荧光特征。结论指甲花醌显现法具有安全性高、健康环保、操作简单、显现效果明显的特点。     

A mechanistic model for the superglue fuming of latent fingerprints

The use of superglue vapors to detect latent fingerprints, known as superglue fuming, is a chemical process that has not been fully described. The role of the fingerprint material in the process, leading to formation of methyl cyanoacrylate polymer at the site of the fingerprint, remains to be established. Films of liquid alkanes respond similarly to actual fingerprints in the fuming experiment. Their responses depended on the hydrocarbon used, viscosity, and film thickness. Aspects such as film thickness appear to be relevant for actual fingerprints as well. A model was proposed in light of these observations. The model compares the process with gas chromatography, in which molecules partition between the gas phase and a stationary phase. Aspects such as accumulation of superglue monomers by partitioning into a thin film (or wax) are consistent with the preferential response of fingerprints on surfaces relative to the background.