无交叉笔画状态下激光打印文字与中性笔书写文字形成时序的实验研究

目的探索无交叉笔画状态下激光打印文字与中性笔书写文字的时序特征及变化规律,以求运用于案件检验。方法以两种不同时序,请5名志愿者分别执不同中性笔在120张A4纸张上书写文字,并使用4台不同型号激光打印机打印文字,再运用奥博视频层晰显微镜对实验样本进行放大观察。结果证实在两种时序条件下制作的实验样本之间存在诸多差异性特征。结论这些差异性特征为准确判定无交叉笔画状态下激光打印文字与中性笔书写文字的时序提供了基础实验依据。     

Examination of the Sequence between Laser Printing and Rollerball Pen Writing Without an Intersecting Stroke

Examining the sequences of printing and writing is a significant method of determining the authenticity and validity of documents. Forensic document examiners have extensively studied crossing lines, which has produced useful information. However, the sequence for laser printing and rollerball pen writing without crossing strokes has not been studied. To solve this problem, volunteers were invited to write characters on A4 paper with different rollerball pens using two sequences. Four laser printers applied print to these sheets, and the materials were examined using an Optem A-Zoom2 video tomography microscope. Consequently, distinguishing features were noted between the materials produced in both sequences. These features might provide a scientific basis for accurately determining the sequence between laser printing and rollerball pen writing in the absence of intersecting strokes.     

Application of Video Spectral Comparator (absorption spectra) for establishing the chronological order of intersecting printed strokes and writing pen strokes

The sequence of intersecting strokes of laser printers (black, blue, red and green) and typewriter ink (black) with the strokes of gel pen ink, ballpoint pen ink and fountain pen ink (black, blue, red and green) has been determined by studying their absorption spectra. The absorption spectra have been generated for each of the two pure inks (i.e. A and B) and points of their intersections (i.e. A over B and B over A) by using Video Spectral Comparator (VSC-2000-HR). The study was carried out with an assumption that the peak characteristics of spectra from the point of intersection should correspond to the peak characteristics of pure ink which was executed later. It was observed that the absorption spectrum of intersection corresponds with either the laser printer or the typewriter ink stroke, whether these strokes were executed earlier or later than the writing instrument strokes. As the results obtained from the study were negative, the FDEs are advised against the practice of this technique in the examination of the sequence of intersecting strokes for these specified inks.     

Sequencing the intersections of printed strokes with writing instrument strokes using DocuCentre expert (PIA 6000-EDF)

Introduction of the digital techniques in document examination has encouraged the Forensic Document Examiners to work with better accuracy in non-destructive ways. In this study, the examination of sequence of intersecting strokes of printers (inkjet printer, laser printer, dot-matrix printer) and typewriters with writing instruments (gel ink pen, ballpoint pen and fountain pen) of different colors was carried out by using Docucenter Expert via PIA-6000 software utilizing extended depth of focus. The continuity of the stroke is the only characteristic which has been observed at the point of intersection.     

Preliminary Study on Determining the Sequence of Intersecting Lines by Fluorescence Technique

The determination of the sequence of intersecting lines is an important part of questioned document examinations. A fluorescence technique was used to determine the sequence of heterogeneous intersecting lines produced using inkpad ink, stamp‐pad ink, ballpoint pens, gel pens, fountain pens, colorants of carbon paper, photocopiers, laser printers, and inkjet printers. A SteREO Discovery.V20 equipped with the ZEN Blue Lite software was chosen to perform the tests.As the results obtained from the study were positive under most conditions, the fluorescence technique was found to be very successful in determining the sequence of intersecting lines from ballpoint pen, gel pen, fountain pen, photocopier, laser and inkjet printers, and inkpad inks. The method was also successful in determining the sequence of intersecting lines from ballpoint pen, photocopier, laser printer, and stamp‐pad inks under most conditions. The technique was not successful in determining the order of crossing lines blending together.     

Application of Raman spectroscopy in forensic investigation of questioned documents involving stamp inks

Stamp pad inks from different manufacturers across India have been analyzed to investigate the feasibility of Raman scattering as a tool for forensic analysis of questioned documents involving stamp inks. Nine different stamping inks were analyzed by both Raman spectroscopic and HPTLC methods. The results demonstrate the effectiveness of these methods in classifying the investigated stamping inks based on their spectral pattern and HPTLC chromatogram. Raman scattering tool was able to determine the sequence of heterogeneous intersection strokes involving a blue stamp pad ink and other writing instruments, such as ballpoint pen ink (red and black), pencil and laser printer toner. However, this method was unable to resolve the exact sequencing for the intersection strokes involving investigated stamp ink and blue ballpoint ink or gel pen ink (all colors).     

Determining the sequence of intersecting gel pen and laser printed strokes — A comparative study

The relative chronological sequence of intersecting gel pen ink lines and laser printed marks has been determined using optical methods. The results were obtained by observing spectral reflection, relative sheen, skipping and gaps of gel pen ink strokes at the point of intersection. The intersections are observed under stereomicroscope and digital microscope. The effectiveness of both the optical instruments for sequence of the strokes has been compared. The sequence of intersecting lines (of same colour, different colours and where one of the strokes is darker) has been established.     

An examination of the sequence of intersecting lines using attenuated total reflectance-Fourier transform infrared spectral imaging

In this study, the potential of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectral imaging as a technique to determine the sequence of line crossings was examined. The technique was successful in determining the sequence of heterogeneous line intersections produced using ballpoint pens and laser printers. By imaging at characteristic frequencies, it was possible to form spectral images showing the spatial distribution of the materials. By examining the spectral images from the inks, it was possible to determine whether the ink was above or below the toner. In blind testing, ATR-FTIR spectral imaging results were directly compared to those obtained by eight experienced forensic document examiners using methods regularly employed in casework. ATR-FTIR spectral imaging was shown to achieve a 100% success rate in the blind tests, whereas some incorrect sequence determinations were made by the forensic document examiners when using traditional techniques. The technique was unable to image ink-jet printing, gel pens, roller ball pens, and felt-tip pens, and was also unable to determine the sequence of intersecting ballpoint pen lines.     

An Examination of the Sequence of Intersecting Seal and Laser Printing Toner Line

Examining the sequence of intersecting seal and laser printing line is a significant method of determining the authenticity and validity of documents. In this study, five brands of stamp pad inks, three types of inkpads and seven kinds of laser printers were used to make heterogeneous line intersections. Observation method of physical characteristics, scraping technique and fluorescence method was used to determine the sequence of intersecting lines. Distinguishing features were noted between the materials produced in both sequences. As the results obtained from the study were positive, these features might provide a scientific basis for accurately determining the sequence between laser printing line and inkpad (stamp pad ink) seal.     

Technical Note: Analyzing the effect of repeated fusing on toner to examine printing alterations made by the same laser printer

With continuous innovations in laser printing technology, the number of cases of falsification using laser printers is increasing annually. Difficulties in identifying printing alternations, especially laser-printed alternations by the same printer are increasing. Effectively, repeated printing on the same page by the same printer means the original toner on the document was fused repeatedly. Thus, this study mainly investigates the effects of second fusing on the microscopic morphology of toner to examine whether documents have been tampered with. To detect the influence of fusing on the microscopic morphology of toner, 170 documents printed by 17 different models of laser printers from 5 brands were studied. It was found that, according to microscopic observations, the micrographs of toner may become brighter, darker or both with repetition of the fusing process. By calculating the average gray value of the micrographs of toner, it was found that, in some laser printers, the gray value of the thermoplastic accumulation area will increase after a second fusing, and the gray value of the toner particle dispersion area will decrease. In conclusion, by comparing the micrographs of toner from suspicious and reliable contents on the same page or in the same document, together with the measurement and analysis of average gray values, it is possible to examine the once- and twice-fused document contents, and further determine whether the document has been altered.     

Examination of heterogeneous crossing sequences between toner and rollerball pen strokes by digital microscopy and 3-D laser profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner.     

The use of an electrostatic detection device to identify individual and class characteristics on documents produced by printers and copiers--a preliminary study

The market is inundated with inkjet printers, laser printers, and photocopiers, which are often used in criminal activities. Many of these office machines are built by various manufacturers, hence they are constructed with different hardware designs (e.g. "rolling" and "grabbing" mechanisms) that have changed over the years due to technological advances. Examinations of printed documents that involve the chemical analysis of ink colorants and the identification of physical machine defects such as trash marks are essential for the forensic examiner, but new techniques are needed to more closely identify a machine model or group of models. An electrostatic detection device (EDD) provide forensic examiners with a nondestructive method to examine indentations on a document. In this work, an EDD is used to detect latent physical markings left on documents by printers and photocopiers. Seventeen inkjet printers, 12 laser printers, and 3 photocopy machines were used to produce test documents. Physical markings were detectable in the large majority of the documents and were reproducible 100% of the time.     

基于银胶表面增强拉曼光谱检验蓝色书写字迹初探

目的用基于银胶的表面增强拉曼光谱技术检验蓝色签字笔字迹。方法取4种常见不同牌号的蓝色签字笔在其字迹上滴加微量银胶,用显微共焦拉曼光谱仪进行检验。结果不同品牌的蓝色签字笔字迹的表面增强拉曼光谱不同。结论基于银胶的表面增强拉曼光谱技术可用于纸张上蓝色签字笔字迹的检验。     

An Examination of the Sequence of Intersecting Lines using Microspectrophotometry

The potential of microspectrophotometry as a technique to determine the sequence of intersecting lines was examined. The technique was used to determine the sequence of heterogeneous line intersections produced using inkpad, stamp‐pad ink and ballpoint pens, gel pens, fountain pens, laser and ink‐jet printers. The study was carried out with an assumption that the peak characteristics of spectra from the point of intersection should correspond to the peak characteristics of pure ink which was executed later. According to spectral reflectance curves, microspectrophotometry was possible to determine whether the ink was above or below the inkpad/stamp‐pad ink seals. In blind testing, microspectrophotometry technique results were directly compared to those obtained by five experienced forensic document examiners using optical microscopy regularly employed in casework. As the results obtained from the study were positive, microspectrophotometry technique was found to be very successful in determining the sequence of heterogeneous line intersections under some conditions.     

Determining Line-Crossing Sequences Between Laser Printing and Writing Pen Using Coaxial Light

Determining the application sequence of hand-written pen ink and printer toner lines has attracted significant interest in questioned document examination. This study uses coaxial light to determine line-crossing sequences, with intersections observed under a VSC600 forensic document workstation and a Leica M205A Stereo-microscope. Results show that reflected light at intersections and color contrast between intersections and nonintersections was observed when a hand-written ink line passes over a toner line, while a toner line passing over a written line appeared dull, with no color contrast. The procedure was tested under a range of conditions, such as types of writing pens and laser printers, the writer, and writing pressure, with the latter playing an important role in the evaluation. To validate the results, a 90% detection rate and 98% accuracy rate were achieved from 50 samples of blind testing, which is more effective than optical microscopy.     

Initial Study for the Determination of the Sequence of Intersecting Lines between Gel Pens and Seals by Optical Coherence Tomography*

Determining the sequence of intersecting lines is a significant issue in the forensic document examination that can reveal the fraud or distinguish between different allegations. Optical coherence tomography (OCT) is a high-resolution cross-sectional imaging technique that has been introduced into forensic science field recently. The potential of OCT as a novel method to determine the sequence of intersecting lines was examined for the first time. In this study, a spectral-domain OCT system with a center wavelength of 900 nm was employed to perform nondestructive examination on determining the sequence of 18 heterogeneous intersecting line samples produced using three types of gel pens and three brands of stamp pad ink seals. Two-dimensional (2D) cross-sectional, and three-dimensional (3D) volumetric images of the intersecting lines were obtained by the OCT system. Several features were noted and analyzed to successfully determine the sequence of all the 18 samples. Blind tests were also conducted to demonstrate the effectiveness of OCT technique. The results illustrate that OCT technology can provide an effective and accurate method for sequencing intersecting lines of gel pen ink and seal ink, which may complement the conventional methods used in the examination of questioned documents.     

显微共焦激光拉曼光谱仪分析激光打印黑色墨粉字迹

激光打印机是常用办公设备,案件中经常会涉及到激光打印文件的检验,运用显微共焦激光拉曼光谱仪检验激光打印黑色墨粉字迹是一种快速、无损、灵敏度高的检验方法,可以对墨粉成分进行定性分析,在司法实践中,此种方法对激光打印黑色墨粉具有较好的检验效果,应用前景广阔。     

GC Analysis of Black Gel Pen Ink Stored under Different Conditions

In many criminal and civil cases in China, the most commonly questioned documents are those written with gel pen ink. An important task for forensic document examiners is to identify whether two or more ink entries in one or more documents were written with the same ink type. The identification of the age of gel ink entries made poses an important and difficult problem for forensic document examiners. In this paper, the volatile components of gel ink were determined and the gel ink was classified by gas chromatography with a flame ionization detector. Calibration curves were created to express the relationship between the content of volatile gel ink components and the age of gel ink entries stored under natural and UV‐induced aging conditions. The correspondence between the natural and UV‐induced aging conditions was also established. The experimental results showed that GC was useful in the analysis of black gel ink and applicable for determining the relative age of gel ink entries under certain conditions.     

Application of capillary electrophoresis to examination of color inkjet printing inks for forensic purposes

In the process of questioned document examination, the discrimination of inkjet printing inks is becoming more necessary due to increasingly frequent counterfeiting of documents printed by inkjet printers. Therefore, a method based on micellar electrophoretic capillary chromatography (MECC) has been developed and applied to analysis of such inks extracted from paper. With the use of an optimized and validated analytical procedure, multielectropherograms of inks taken from various models of printers made by various producers (Hewlett-Packard, Epson, Brother, Lexmark and Canon) were created. It was shown that effective differentiation of individual inks was possible in terms of migration time, order and specific shapes of characteristic peaks. By comparison of recorded UV-Vis spectra, the identification of main dyes was also achievable. The usefulness of the method was confirmed by an intralaboratory test of utility, in which several forged printouts were successfully examined. The obtained results proved that the proposed procedure is a useful tool that could be applied to ink discrimination and group identification of dyes originating from inkjet printing inks. Consequently, the developed method can be applied in the forensic field, including investigation of the authenticity of documents.     

针式打印文件检验的探讨

针式打印机是一种常用的办公机具,从针式打印机的结构和打印原理出发,阐述了针式打印文件种类鉴别和个体识别所依据的打印特征,为针式打印文件的检验鉴定进行操作层面的探讨。