Lead isotope measurement of primer gunshot residues and likelihood ratio predictions for forensic cartridge discrimination and individualization in China

Gunshot residues (GSR), cartridge projectiles, and casings are frequently encountered evidence in gun-related forensic investigations. However, in circumstances where the investigation of striation marks is impossible, such as unrecovered or deformed projectiles and cartridge casings, GSR deposited on the hands or clothes of the shooter and victim-related items can provide information to establish a link between the suspect, the firearms used, and the victim. Since the formula of primers used by all cartridge manufacturers in China is identical, links based on the conventional morphological and compositional analysis of GSR are difficult to establish. However, the abundance of lead isotopes in primer components of lead styphnate varies significantly, and a fundamental understanding of these differences may facilitate the validation of primer (p)GSR evidence in forensic investigations. Here, 44 pGSR samples were characterized by Pb isotope ratios of ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb using laser ablation multicollector inductively coupled plasma mass spectrometry. There was no obvious mass fractionation of the lead isotope ratios of the primers from individual cartridges analyzed before and after the shooting process, thereby establishing a basis for the comparison of pGSR and unfired cartridges. Evaluation of the results using univariate likelihood ratio (LR) computations revealed low rates of misleading evidence (<0.53%) The results demonstrated that lead isotope ratio analysis of pGSR and LR predictions can provide a practicable method for forensic cartridge discrimination and individualization.     

Prediction of Projectile Ricochet Behavior After Water Impact*

Abstract: Although not very common, forensic investigation related to projectile ricochet on water can be required when undesirable collateral damage occurs. Predicting the ricochet behavior of a projectile is challenging owing to numerous parameters involved: impact velocity, incident angle, projectile stability, angular velocity, etc. Ricochet characteristics of different projectiles (K50 BMG, 0.5‐cal Ball M2, 0.5‐cal AP‐T C44, 7.62‐mm Ball C21, and 5.56‐mm Ball C77) were studied in a pool. The results are presented to assess projectile velocity after ricochet, ricochet angle, and projectile azimuth angle based on impact velocity or incident angle for each projectile type. The azimuth ranges show the highest variability at low postricochet velocity. The critical ricochet angles were ranging from 15 to 30°. The average ricochet angles for all projectiles were pretty close for all projectiles at 2.5 and 10° incident angles for the range of velocities studied.     

Scanning Electron Microscope Analysis of Gunshot Defects to Bone: An Underutilized Source of Information on Ballistic Trauma

Recent years have seen increasing involvement by forensic anthropologists in the interpretation of skeletal trauma. With regard to ballistic injuries, there is now a large literature detailing gross features of such trauma; however, less attention has been given to microscopic characteristics. This article presents analysis of experimentally induced gunshot trauma in animal bone (Bos taurus scapulae) using full metal jacket (FMJ), soft point (SP), and captive bolt projectiles. The results were examined using scanning electron microscopy (SEM). Additional analysis was conducted on a purported parietal gunshot lesion in a human cranial specimen. A range of features was observed in these samples suggesting that fibrolamellar bone response to projectile impact is analogous to that observed in synthetic composite laminates. The results indicate that direction of bullet travel can be discerned microscopically even when it is ambiguous on gross examination. It was also possible to distinguish SP from FMJ lesions. SEM analysis is therefore recommended as a previously underexploited tool in the analysis of ballistic trauma.     

Taphonomic Marks on Pig Tissue Due to Cadaveric Coleoptera Activity Under Controlled Conditions

The aim of this work was to study taphonomic marks that cadaveric coleopteran can produce under controlled conditions. To evaluate this, pig trotters were initially exposed to adults of Dermestes maculatus De Geer at 21 ± 5°C and a 12:12‐h day/night cycle. Observations were made and photographs taken every 4–5 days for 9 months. When feeding and reproducing, D. maculatus produced, in both adult and larvae stages, different types of marks such as holes, striations, scratches, and pits in several kinds of tissue such as integumental, connective, and muscular, in both their fresh and dried stages. Bite marks were also evident. The results in this study provide not only taphonomic but also biological and forensic information. This is the first time that this kind of experiment has been performed.     

Development of a Mobile Toolmark Characterization/Comparison System

Since the development of the striagraph, various attempts have been made to enhance forensic investigation through the use of measuring and imaging equipment. This study describes the development of a prototype system employing an easy‐to‐use software interface designed to provide forensic examiners with the ability to measure topography of a toolmarked surface and then conduct various comparisons using a statistical algorithm. Acquisition of the data is carried out using a portable 3D optical profilometer, and comparison of the resulting data files is made using software named “MANTIS” (Mark and Tool Inspection Suite). The system has been tested on laboratory‐produced markings that include fully striated marks (e.g., screwdriver markings), quasistriated markings produced by shear‐cut pliers, impression marks left by chisels, rifling marks on bullets, and cut marks produced by knives. Using the system, an examiner has the potential to (i) visually compare two toolmarked surfaces in a manner similar to a comparison microscope and (ii) use the quantitative information embedded within the acquired data to obtain an objective statistical comparison of the data files. This study shows that, based on the results from laboratory samples, the system has great potential for aiding examiners in conducting comparisons of toolmarks.     

Bite Mark Analysis in Foodstuffs and Inanimate Objects and the Underlying Proofs for Validity and Judicial Acceptance

Even though one of the first bite mark cases was Doyle v. State in 1954 (a bitten cheese case), the research has focused on bite marks inflicted in human skin. As published Papers, Case Reports, or Technical Notes can constitute precedents which are relied upon in making the legal arguments and a considerable amount of case law exists in this area, we present a systematic review on bite mark analysis in foodstuffs and inanimate objects and their underlying proofs for validity and judicial acceptance according to Daubert rulings. Results showed that there is vulnerability in these procedures, and it is essential to demand for focus scrutiny on the known error rates when such evidence is presented in trials. These kinds of bite marks are well documented; however, there has been little research in this field knowing that the protocols of analysis and comparison are the responsibility of the forensic odontologists.     

Reflectance Transformation Imaging (RTI) for the Documentation of Saw Mark Characteristics

Photography is widely accepted as a means of forensic case documentation and evaluation. In cases of criminal dismemberment digital microscopy is commonly used to assess marks left on the bone. Reflectance transformation imaging (RTI) is a computational photography technique which documents and enhances the three-dimensional (3D) reflectance properties of the surface of an object. RTI has primarily been used in the cultural heritage sector but has recently transitioned into forensic science. This study examines the use of RTI for the documentation and presentation of cut surface characteristics on fully sectioned long bones. Juvenile pig radii were bisected using three different handsaws, chosen as handsaws are the most common implement used in criminal dismemberments. The resulting 42 cut surfaces were then documented with a digital microscope and RTI. Four rendering modes were applied to the default RTI image, with diffuse gain being the most beneficial to accentuate cut surface features. Although great care must be taken when obtaining the photographic sequences necessary for detailed RTI analysis, RTI is relatively inexpensive, expeditious, and easy to use, and creates highly detailed, virtually interactive images. RTI may not replace microscopic methods of saw mark analysis, however could prove useful for the documentation, image sharing, and presentation of forensic evidence.     

Friction Marks of Stabbing Tools in Tires

When receiving a stabbed tire for examination, forensic toolmark examiners can determine whether a suspect tool was used in a specific crime based on class-characteristics and individual-characteristics marks that have been left by the tool on the tire. This study discusses friction marks and their forensic value during the examination of a punctured tire. The term friction mark refers to the noticeable mark around the penetration area on a tire's surface. Tires designed to create high friction when contacting a road. Due to this design, friction is created between the stabbing tool shank and the sides of the hole. As a result of this friction, the shank of the stabbing tool wears the outer layer of tire around the hole. This leaves a friction mark whose general shape reflects the cross-sectional shape of the stabbing tool’s shank. This phenomenon was observed and named by Locke (7) in his evaluation of tire puncture marks with knives. This article demonstrates the same phenomenon with other types of stabbing tools. Test stabs were produced with different tools representing a variety of cross-sectional shapes of shanks, and the resulting friction marks were photo-documented and discussed. Correlations between the various cross-sectional shapes and their corresponding friction marks are shown. Based on friction mark examination, the examiner: (i) can infer suspect tool shank cross-sectional shape with the evaluation of the friction mark shape and (ii) can deduce the maximum dimensions of the shank. This examination simplifies and accelerates the forensic comparison procedure and the investigation time.     

Educating Jurors about Forensic Evidence: Using an Expert Witness and Judicial Instructions to Mitigate the Impact of Invalid Forensic Science Testimony

Invalid expert witness testimony that overstated the precision and accuracy of forensic science procedures has been highlighted as a common factor in many wrongful conviction cases. This study assessed the ability of an opposing expert witness and judicial instructions to mitigate the impact of invalid forensic science testimony. Participants (N = 155) acted as mock jurors in a sexual assault trial that contained both invalid forensic testimony regarding hair comparison evidence, and countering testimony from either a defense expert witness or judicial instructions. Results showed that the defense expert witness was successful in educating jurors regarding limitations in the initial expert's conclusions, leading to a greater number of not-guilty verdicts. The judicial instructions were shown to have no impact on verdict decisions. These findings suggest that providing opposing expert witnesses may be an effective safeguard against invalid forensic testimony in criminal trials.     

Assessing Cognitive Bias in Forensic Decisions: A Review and Outlook

In recent years, a number of studies have demonstrated that forensic examiners can be biased by task-irrelevant contextual information. However, concerns relating to methodological flaws and ecological validity attenuate how much the current body of knowledge can be applied to real-life operational settings. The current review takes a narrative approach to synthesizing the literature across forensic science. Further, the review considers three main issues: (i) primary research on contextual bias within forensic science; (ii) methodological criticisms of this research; (iii) an alternative perspective that task-irrelevant contextual information does not always lead to error. One suggestion for future research is outlined, which is that studies on contextual bias in forensic decisions should be conducted in collaboration between forensic scientists and cognitive psychologists. Only then can rigorous and ecological valid experiments be created that will be able to assess how task-irrelevant contextual information influences forensic analysis and judgments in operationally valid settings.     

Survival of Atherosclerotic Calcifications in Skeletonized Material: Forensic and Pathological Implications

Atherosclerosis is a chronic inflammatory disease creating calcifying plaques in the arterial walls. Because its paleopathological diagnosis remains little studied on skeletal remains, its impact on forensic and archeological data is completely underestimated. Here, 24 skeletal remains from the Milano Cemetery Skeletal Collection have been studied to evaluate the chance of atherosclerotic calcification survival, retrieval, and identification. Through direct comparison with a known autopsy collection and literature, the identification and categorization of several types of calcifications were performed. Clothing elements such as tights or socks played a definitive role in the preservation of the calcifications; hence they are more likely to be found in forensic cases than in archeological ones. Therefore, vascular calcifications are possible to collect and identify in skeletal remains if sufficient care is given to their recovery. Consequently and as markers of the disease, such identification can provide valuable pathological information for forensic and archeological cases.     

Context Effects in Forensic Entomology and Use of Sequential Unmasking in Casework

Context effects are pervasive in forensic science, and are being recognized by a growing number of disciplines as a threat to objectivity. Cognitive processes can be affected by extraneous context information, and many proactive scientists are therefore introducing context‐minimizing systems into their laboratories. Forensic entomologists are also subject to context effects, both in the processes they undertake (e.g., evidence collection) and decisions they make (e.g., whether an invertebrate taxon is found in a certain geographic area). We stratify the risk of bias into low, medium, and high for the decisions and processes undertaken by forensic entomologists, and propose that knowledge of the time the deceased was last seen alive is the most potentially biasing piece of information for forensic entomologists. Sequential unmasking is identified as the best system for minimizing context information, illustrated with the results of a casework trial (n = 19) using this approach in Victoria, Australia.     

Laminated safety glass as an intermediate target: a wound ballistic study

Various 9‐mm ammunitions (A1, A4, A5, ST, GS, GSb, P.E.P., SeCa, HP, PTP/s, VM, McVG, DM41, PTP, SX2, PT, and MEN frangible) were tested regarding their velocity, energy, angle of impact, and potential wound channel after penetrating a car window at 30° and 90°. Test materials were gelatine, soap, and pig cadavers. The velocities of the projectiles were between c. 288 and 430 m/ses, the energy spread between 394 and 564 J. Handgun bullets fired through vehicular side window glass lose substantial energy reducing the effectiveness of the ammunition. This effect is greater when fired at an angle of 30° compared to 90°. At a shooting angle of 90°, none of the different projectiles showed remarkable differences considering its wound ballistic features. Accuracy is maintained at a 90° angle but seriously impaired at 30°. None of the examined ammunition complied with the demanded wound channel effectiveness of 30–60 J/cm.     

Accidental Trauma Mimicking Homicidal Violence

Homicide investigations represent an important function of death investigators. Although recognizing nonobvious homicides is crucial, an equally important role involves the identification of cases that initially present as possible homicides, but are ultimately discovered to not represent homicides. Failure to recognize such cases results in wasted time, squandered resources, false allegations, and potential life‐altering consequences. The authors review a series of cases wherein initial investigation suggested a possibility that the deaths represented homicides. By carefully considering additional information, including scene findings, history, and postmortem examination, each was determined to represent an accidental traumatic death. In addition to highlighting the importance of recognizing accidental traumatic deaths that initially present as homicides, the cases serve to highlight the fact that forensic pathology cannot be practiced without knowledge of appropriate ancillary information. Although guarding against cognitive bias is important in all forensic disciplines, including forensic pathology, access to vital case‐related ancillary information is an essential component of practicing medicine as a forensic pathologist.     

Assessment of Maceration Techniques Used to Remove Soft Tissue from Bone in Cut Mark Analysis

Maceration techniques employed in forensics must be effective without compromising the bone's integrity and morphology, and prevent destruction of evidence. Techniques must also be fast, safe, easily obtainable and inexpensive; not all techniques currently employed are appropriate for forensic use. To evaluate the most suitable approach, seven techniques including current and new methodologies were applied to fresh, fleshed porcine ribs exhibiting cut marks. A sample size of 30 specimens per technique was examined under scanning electron microscopy at the cut mark and the surrounding uncompromised regions; a scoring system of effectiveness was applied. The previously unpublished microwave method fared best for bone and cut mark preservation. Sodium hypochlorite destroyed cut marks, and was deemed unsuitable for forensic analysis. No single technique fulfilled all criteria; however, this study provides a benchmark for forensic anthropologists to select the most appropriate method for their situation, while maintaining the high standards required by forensic science.     

Meeting a Forensic Podiatry Admissibility Challenge: A Daubert Case Study

This article is an introduction to the United States Supreme Court's standard of admissibility of forensic evidence and testimony at trial, known as the Daubert standard, with emphasis on how this standard applies to the field of forensic podiatry. The author, a forensic podiatrist, provided law enforcement with evidence tying a bloody sock‐clad footprint found at the scene of a homicide to the suspect. In 2014, the author testified at a pretrial hearing, known as “a Daubert hearing,” to address the admissibility of this evidence in court. This was the first instance of forensic podiatry being the primary subject of a Daubert hearing. The hearing resulted in the court ordering this evidence admissible. The expert's testimony contributed to the suspect's conviction. This article serves as a reference for forensic podiatrists and experts in similar fields that involve impression evidence, providing evidentiary standards and their impact on expert evidence and testimony.     

Effectiveness of comparison overlays generated with DentalPrint software in bite mark analysis

Validation studies of the new DentalPrint software were carried out with experimental bite marks in pigskin. The bite marks were digitally photographed according to the ABFO guidelines for evidence collection. Dental casts used in the experiment were scanned in 3D and 2D, and comparison overlays were generated using DentalPrint and Adobe Photoshop software, respectively. Digitized photographs of the experimental bite marks and the biting edges obtained in the overlays were compared by two different examiners to analyze the impact of training and experience with the two methods. Receiver operating characteristic (ROC) analysis, sensitivity, specificity, and 95% confidence intervals for each cutoff point were calculated. The expert examiner using DentalPrint obtained the best results, with an area under the ROC curve of 0.76 (SE=0.057; CI at 95%=0.652-0.876). Fairly high specificity values were found for DentalPrint, and the best results were obtained for the cutoff value that discriminated between the examiner's response "biter" and the rest of the possible (specificity 97.9%, CI at 95%=93.2%-99.6%). Therefore, the results presented here indicate that DentalPrint is a useful, accurate tool for forensic purposes, although further research on the comparison process is needed to enhance the validity of bite mark analysis.     

Avian Scavenging of Small‐Sized Pig Carcasses in Central Florida: Utilizing GIS to Analyze Site Variables Affecting Skeletal Dispersal

Scavengers can significantly alter a forensic scene and consume, modify, disarticulate, and disperse bodies on the ground surface. The research purpose was to examine vulture scavenging in central Florida, USA. Four small‐sized pig (Sus scrofa) carcasses were left on the ground surface of two microenvironments (shaded and open) at a secure site with game cameras. Dispersal data were mapped and analyzed using geographical information systems spatial analysis digital mapping tools. The primary avian scavengers recorded included black vultures (Coragyps atratus) and turkey vultures (Cathartes aura), as well as bald eagles (Haliaeetus leucocephalus). Carcass dispersal patterns were impacted by foliage density (grass height and concentrations of bushes and trees) and proximity to the perimeter fence. While the majority of skeletal elements were dispersed within 6 m of the carcass deposition locations, dispersion occurred over a greater distance in the wooded microenvironment. Overall, vulture behaviors deleteriously destroyed and changed the context of the scene, with black vultures having the greatest impact.     

Artifacts Caused by Leaf-Cutting Ants of the Genus Atta (Hymenoptera: Formicidae): Postmortem Bite Injuries and the Tearing of Clothes

Ants are one of the first insects to find an exposed cadaver and can be present during all stages of decomposition. Although these organisms are not commonly used in postmortem interval estimates, they are to be taken into account on criminal investigations involving human corpses, since they can leave bite marks that can be mistaken for antemortem or perimortem injuries, which could be misleading when ascertaining the occurrence of abuse or physical altercation during a crime. A few studies report the action of ants on human cadavers and even though leaf-cutting ants of the genus Atta are frequently encountered in succession studies that use animal carcasses, there are no records of these fungus-growing species on human corpses. Atta is a genus restricted to the New World, ranging from northern Argentina to southern United States and acts as one of the most conspicuous neotropical herbivores. In this study, we report three cases of violent death that illustrate the impact of ants, especially those of the genus Atta, in a forensic setting. We compare the patterns displayed by postmortem bite injuries caused by leaf-cutter ants and other common species with less robust mandibles. We also present the capability of Atta ants to create artifacts by cutting victim’s clothes in a crime scene, contributing to the knowledge of ant-mediated confounding factors in crime scene investigation.     

Characteristics of Backspatter on the Firearm and Shooting Hand—An Experimental Analysis of Close‐range Gunshots

Contact and close‐range gunshot injuries can produce bloodstains on the shooting hand and weapon. In this study, backspatter was analyzed in experimental horizontal pistol shots into blood‐filled sponges. The shooting distances were set between 0 and 45 cm. With increasing shooting distance, there was a significant decrease in the degree of backspatter. Microspatter could be detected on the weapon and shooting hand up to a shooting distance of 40 cm. They were predominantly located on thumb and index finger as well as the radial dorsal aspects of the hand. Fine spray of microspatter combined with elongated droplets in the shape of exclamation marks was found at contact and 2‐cm distance shots. An angular calculation based on the shape of the bloodstains was possible up to a shooting distance of 2 cm. No bloodstains were detected beyond 45 cm.