Application of fluorescence lifetime imaging (FLIM) in latent finger mark detection

Fluorescence lifetime imaging (FLIM) in frequency domain enables the mapping of the spatial distribution of fluorescence lifetimes of a specimen. It has been extensively applied in biology. In this paper, a theoretical analysis for the fluorescence lifetime determination of latent finger mark samples is described, which is followed by the feasibility study of using FLIM in frequency domain for latent finger marks detection. Preliminary experiments are carried out with latent finger marks treated with a fluorescent powder on two different substrates. The resulting fluorescence lifetime image of finger mark revealed a good contrast, and was able to detect the latent finger marks clearly.     

Visualization of latent fingerprints using fluorescence lifetime imaging on paper emitting strong fluorescence

Latent fingerprints were successfully visualized using fluorescence lifetime imaging (FLIM) on paper which emits strong fluorescence with a lifetime close to that of fingerprints and thus from which it is difficult for time-resolved spectroscopy to visualize fingerprints. Latent fingerprint samples on paper were excited using a 450 nm or 532 nm nanosecond pulsed-laser, and time-resolved fluorescence images were obtained at a delay time of 6–16 ns in intervals of 1 ns, to the excitation pulse. The excitation beam was expanded using a lens, and the fluorescence from the fingerprints was captured using an intensified CCD camera. Because of the large fluorescence intensity of the background paper of approximately two to four orders of magnitude larger than that of the fingerprint, the fingerprint was not visualized on each fluorescence image by time-resolved spectroscopy. However, the fingerprint was visualized in a FLIM image constructed using a series of the fluorescence images for the case with the fluorescence intensity of the background paper being four orders of magnitude larger than that of the fingerprint. The difference in fluorescence lifetime in the FLIM image of the visualized fingerprint and background paper was in the order of 0.1 ns, which was an order of magnitude smaller than the inherent fluorescence lifetime of a few nanoseconds for the fingerprints and paper. It was demonstrated that, at a background fluorescence intensity with a certain order of magnitude larger than that of fingerprints, FLIM has the potential to visualize latent fingerprints which cannot be visualized by time-resolved spectroscopy.     

An assessment of the effectiveness of 5-methylthioninhydrin within dual action reagents for latent fingerprint development on paper substrates

A critical investigation of 5-methylthioninhydrin (5MTN) is presented as a 'dual action' formulation component for the development of latent finger marks on paper substrates. Preparation of a dual action reagent was performed by combining proportions of 5MTN and zinc chloride (ZnCl(2)) in a pre-mixed solution. Developed prints (deposited on filter paper substrates) could be subsequently visualised in both colour and fluorescence modes. Finger mark quality was graded using a quartered print approach for a number of reagent compositions to deliver an optimised formulation recipe. To fully appraise 5MTN in comparison to currently employed chemistries, this reagent was evaluated against three alternative amino acid selective reagents, ninhydrin, 1,8-diazafluorenone (DFO) and 1,2-indandione/ZnCl(2). Six common paper types were used for this purpose and split depletion finger marks from six donors were collected. Finger mark sets were also left for two days or two weeks to show the effect of ageing on development quality. For the first time, it was shown that 5MTN/ZnCl(2) is effective as a 'dual action' reagent under the United Kingdom climate conditions. However, results presented herein show that the existing recommended chemistries and the 1,2 indandione/ZnCl(2) process are all more effective than this new latent finger mark enhancement reagent. In a preliminary sequencing study, we show the effectiveness of the existing DFO-ninhydrin sequence over dual action reagents.     

A methodology for finger mark research

Currently there is no standard way of carrying out research into finger mark enhancement techniques. Individuals, groups or establishments tend to use different methodologies depending on a number of factors, especially finance and time. However, data published in the literature can be misleading to the forensic community if the data generated reflects research involving very few finger marks or if those finger marks have been deliberately doped with an unnatural balance of sweat or an unusual contaminant. This paper presents an experimental methodology which is intended to establish minimum standards for those carrying out finger mark enhancement research (at least within the United Kingdom) and bring some consistency to the process. It will aim to identify the many variables encountered when dealing with finger marks and suggest experimental methods to take these into account. It will also present the key stages of the progression of a process from a laboratory concept to a tool used on operational work.     

The recovery of finger marks from soot-covered glass fire debris.

This study aimed to expand the scope of previous research by assessing the effectiveness of soot-removal techniques on glass from petrol-bomb debris using methods of 1% and 2% sodium hydroxide (NaOH) solutions, ultrasonic bath and vacuum suction. Of particular interest were the 1% and 2% NaOH solutions applied to the soot-covered surfaces. Petrol bombs containing petrol or a 50:50 mix of petrol and motor oil were exploded and the debris was collected for analysis. Favourable results were found to varying degrees using each of the soot-removal methods with the 1% and 2% NaOH wash solutions, being the most useful. The 2% NaOH solution also proved successful as a soak to loosen and remove heavy contamination of soot and accelerants without damaging the finger mark beneath. This study also found that recovery of finger marks in blood from beneath soot using the 2% NaOH solution was possible. Finger marks were also applied to glass bottles with plastic adhesive labels, and providing the fire damage is not too great marks were also retrievable. Results from this study lead to the conclusion that the NaOH wash solution is ideally suited for soot removal to reveal latent and blood-contaminated marks both within the laboratory and at crime scenes.     

Lifting techniques for finger marks on human skin previous enhancement by Swedish Black powder — A preliminary study

An examination was done to investigate whether certain lifting techniques can lift recovered latent fingerprints on human skin surfaces of living subjects. For recovery Swedish Soot powder mixture (Swedish Black) was used.Donors intentionally placed fingerprints on the skin surface of living subjects. Finger marks were then in all cases recovered with Swedish Black powder. The procedure was repeated after 1 h and 4 h. Treated finger marks were secured and preserved as latent fingerprint evidence by different lifting processes. Having examined skin surfaces and finger marks we observed that the lifters such as white instant lifter, white fingerprint gelatin, black fingerprint gelatin, silicone, transparent adhesive tape, are suitable. Moreover, white fingerprint gelatin and white instant lifter proved to be very good at lifting treated finger marks. Black fingerprint gelatin was very good also, but finger marks were examined by slant light.     

Reactions of latent prints exposed to blood

We explored whether an undeveloped latent print (fingermark) exposed to blood and later developed by enhancement with blood reagents such as amido black (AB) or leucocrystal violet (LCV) could appear as a genuine blood mark. We examined three different experimental conditions. In Experiment I, fingermark residue only was tested, as a control to confirm that fingermark residue alone does not react with the blood reagents AB and LCV. Experiment II investigated whether latent fingermarks exposed to blood dilutions could be treated with AB or LCV and subsequently appear as a genuine blood mark enhanced with AB or LCV. Experiment III tested whether latent fingermarks exposed to whole blood could be processed with AB or LCV and subsequently appear as a genuine blood mark enhanced with AB or LCV.The present study found that indeed, fingermark residue alone does not react with the blood reagents AB and LCV. In Experiment II, an interaction occurred between the fingermark residue and the diluted blood that caused the ridges to appear a red color. In the present study, this interaction is called a faux blood mark. While the faux blood mark phenomenon occurred most often following exposure to diluted blood, it did not occur consistently, and a predictable pattern could not be established. However, the reaction occurred more frequently following extended fingermark residue drying times. Faux blood marks are distinguishable from genuine blood marks prior to enhancement with blood reagents. Following treatment with blood reagents, it became increasingly difficult to determine whether the enhanced mark was a genuine blood print or a latent fingermark exposed to diluted blood. Latent fingermarks exposed to whole blood often resulted in a void prior to enhancement, but following treatment with blood reagents, were difficult to distinguish from a genuine blood mark enhanced with blood reagents.     

Detection of nitro-organic and peroxide explosives in latent fingermarks by DART- and SALDI-TOF-mass spectrometry

The ability of two mass spectrometric methods, surface-assisted laser desorption/ionization-time of flight-mass spectrometry (SALDI-TOF-MS) and direct analysis in real time (DART-MS), to detect the presence of seven common explosives (six nitro-organic- and one peroxide-type) in spiked latent fingermarks has been examined. It was found that each explosive could be detected with nanogram sensitivity for marks resulting from direct finger contact with a glass probe by DART-MS or onto stainless steel target plates using SALDI-TOF-MS for marks pre-dusted with one type of commercial black magnetic powder. These explosives also could be detected in latent marks lifted from six common surfaces (paper, plastic bag, metal drinks can, wood laminate, adhesive tape and white ceramic tile) whereas no explosive could be detected in equivalent pre-dusted marks on the surface of a commercial lifting tape by the DART-MS method due to high background interference from the tape material. The presence of TNT and Tetryl could be detected in pre-dusted latent fingermarks on a commercial lifting tape for up to 29 days sealed and stored under ambient conditions.     

A comparison of multi-metal deposition processes utilising gold nanoparticles and an evaluation of their application to 'low yield' surfaces for finger mark development

This paper reports a comparison of the effectiveness and practicality of using different multi-metal deposition processes for finger mark development. The work investigates whether modifications can be made to improve the performance of the existing process published by Schnetz. Secondly, we compare the ability of different multi-metal deposition processes to develop finger marks on a range of surfaces with that of other currently used development processes. All published multi-metal deposition processes utilise an initial stage of colloidal gold deposition followed by enhancement of the marks with using a physical developer. All possible combinations of colloidal gold and physical developer stages were tested. The method proposed by Schnetz was shown to be the most effective process, however a modification which reduced the pH of the enhancement solution was revealed to provide the best combination of effectiveness and practicality. In trials comparing the modified formulation with vacuum metal deposition, superglue and powder suspensions on surfaces which typically give low finger mark yields (cling film, plasticised vinyl, leather and masking tape), the modified method produced significantly better results over existing processes for cling film and plasticised vinyl. The modified formulation was found to be ineffective on both masking tape and leather. It is recommended that further tests be carried out on the modified multi-metal deposition formulation to establish whether it could be introduced for operational work on cling film material in particular.     

Cognitive issues in fingerprint analysis: inter- and intra-expert consistency and the effect of a 'target' comparison

Deciding whether two fingerprint marks originate from the same source requires examination and comparison of their features. Many cognitive factors play a major role in such information processing. In this paper we examined the consistency (both between- and within-experts) in the analysis of latent marks, and whether the presence of a 'target' comparison print affects this analysis. Our findings showed that the context of a comparison print affected analysis of the latent mark, possibly influencing allocation of attention, visual search, and threshold for determining a 'signal'. We also found that even without the context of the comparison print there was still a lack of consistency in analysing latent marks. Not only was this reflected by inconsistency between different experts, but the same experts at different times were inconsistent with their own analysis. However, the characterization of these inconsistencies depends on the standard and definition of what constitutes inconsistent. Furthermore, these effects were not uniform; the lack of consistency varied across fingerprints and experts. We propose solutions to mediate variability in the analysis of friction ridge skin.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

论域名与商标

关于域名与商标发生的冲突问题,我国有关的行政法规虽然作出了明确的规定,但是并没有得到执行。尽管法院在处理域名与商标的纠纷中适用了反不正当竞争法的规定,但也只是该法律中其他法律也适用的原则。基于商标与域名的本质区别以及国外法律和国际上的有关规定,笔者认为商标与域名发生冲突时,除“恶意抢注”和“滥用权利”外,处理时不应都简单地认为商标权优先。为了更好地保护商标权人和域名注册人的利益并促进国际互联网络的健康发展,应尽快制定相应的法律、法规,并积极参与制定有关的国际条约。     

Evidence evaluation in fingerprint comparison and automated fingerprint identification systems--modelling within finger variability

Recent challenges and errors in fingerprint identification have highlighted the need for assessing the information content of a papillary pattern in a systematic way. In particular, estimation of the statistical uncertainty associated with this type of evidence is more and more called upon. The approach used in the present study is based on the assessment of likelihood ratios (LRs). This evaluative tool weighs the likelihood of evidence given two mutually exclusive hypotheses. The computation of likelihood ratios on a database of marks of known sources (matching the unknown and non-matching the unknown mark) allows an estimation of the evidential contribution of fingerprint evidence. LRs are computed taking advantage of the scores obtained from an automated fingerprint identification system and hence are based exclusively on level II features (minutiae). The AFIS system attributes a score to any comparison (fingerprint to fingerprint, mark to mark and mark to fingerprint), used here as a proximity measure between the respective arrangements of minutiae. The numerator of the LR addresses the within finger variability and is obtained by comparing the same configurations of minutiae coming from the same source. Only comparisons where the same minutiae are visible both on the mark and on the print are therefore taken into account. The denominator of the LR is obtained by cross-comparison with a database of prints originating from non-matching sources. The estimation of the numerator of the LR is much more complex in terms of specific data requirements than the estimation of the denominator of the LR (that requires only a large database of prints from an non-associated population). Hence this paper addresses specific issues associated with the numerator or within finger variability. This study aims at answering the following questions: (1) how a database for modelling within finger variability should be acquired; (2) whether or not the visualisation technique or the choice of different minutiae arrangements may influence that modelling and (3) what is the magnitude of LRs that can be expected from such a model. Results show that within finger variability is affected by the visualisation technique used on the mark, the number of minutiae and the minutiae configuration. They also show that the rates of misleading evidence in the likelihood ratios obtained for one of the configurations examined are low.     

Morphometry of latent palmprints as a function of time

In many crimes, the elapsed time between production and collecting fingermark traces is crucial. and a method able to detect the aging of latent prints would represent an improvement in forensic procedures. Considering that as the latent print gets older, substantial changes in the relative proportion of individual components secreted by skin glands could affect the morphology of ridges, morphometry could be a potential tool to assess the aging of latent fingermarks. Then, considering the very limited research in the field, the present work aims to evaluate the morphometry of latent palmprint ridges, as a function of time, in order to identify an aging pattern. The latent marks were deposited by 20 donors on glass microscope slides considering pressure and contact angle, and then were maintained under controlled environmental conditions. The morphometric study was conducted on marks developed with magnetic powder in 7 different time intervals after deposition (0, 5, 10, 15, 20, 25 or 30 days); 60 ridges were evaluated for each developed mark. The results showed that: 1) the method for the replacement and mixing of skin secretions on the palm was appropriate to ensure reproducibility of latent prints, and 2) considering the studied group, there was a time-dependent reduction in the width of ridges and on the percentage of visible ridges over 30 days. Results suggest the possibility of using the morphometric method to determine an aging profile of latent palmprints on glass surface, aiming for forensic purposes.     

Techniques for fingerprint recovery on vegetable and fruit surfaces used in Slovenia — A preliminary study

An examination was conducted to investigate whether certain dactyloscopic powders and reagents can recover latent fingerprints on vegetable and fruit surfaces (apple, banana, tomato and potato). Two fingerprint powders, Swedish Soot powder mixture (Swedish Black), Silver Special powder and cyanoacrylate fuming (CA), were investigated. The results have shown that detection with Swedish blackpowder is the most suitable procedure as the percentage finger marks which were of adequate quality for further examination, was higher than with any other technique examined.     

Storage effects on ninhydrin-developed fingerprints enhanced by zinc complexation

A study has been made of the effects of storage on the fluorescence of latent fingermarks on paper developed with ninhydrin and zinc chloride. Exposure to sunlight or xenon arc light causes fading of the marks but the presence of moisture or high humidity results in the loss of fluorescence and the formation of a red non-fluorescent compound.     

Quantitative assessment of evidential weight for a fingerprint comparison I. Generalisation to the comparison of a mark with set of ten prints from a suspect

The authors have published elsewhere a quantitative method for assessing weight of evidence in the case where a finger mark from a crime scene is compared with a control print taken from a single finger of a suspect. The approach is based on the notion of calculating a likelihood ratio (LR) that addresses a pair of propositions relating to the single finger that was the origin of the crime mark. In practice, things are rather different because the crime mark will not just be compared with a single finger from a suspect but with a set of prints from all of his/her fingers; likewise, when the mark is compared with a database, this will consist of ten print records from random individuals. It is clear that "finger propositions" are not realistic in this situation and we show how our approach may be generalised to address a pair of propositions that relate to the person that made the crime mark. It often is the case that information is present at the crime scene that enables some inference to be drawn relating to which of the offender's ten fingers left a particular mark of interest. This kind of inference may profitably be drawn into the formal analysis. We illustrate our approach with an example.     

铜导线一次和二次短路熔痕的显微共聚焦激光拉曼光谱特征研究

目的 为了判定火灾发生的原因,依据激光拉曼光谱(RMS)能够反映出经过不同高温热处理炭材料的石墨化程度,以此来探索电气短路判定的技术依据.方法 利用显微共聚焦激光拉曼光谱仪对火灾中不同环境下生成的铜导线短路熔痕表面碳痕斑进行检测分析,利用碳痕斑两个拉曼特征位移峰的比值,计算不同短路熔痕表面碳化斑的石墨化度.结果 铜导线的一次短路、二次短路和火烧熔痕上残留碳斑石墨化度不同,一次短路熔珠碳痕的石墨化度R值最小,火烧熔痕的石墨化度R值最大.结论 该研究建立了显微激光拉曼光谱法无损检测分析铜导线短路熔痕的新方法.     

Fingerprint recovery from human skin surfaces.

A study was conducted to investigate whether certain dactyloscopic powders and reagents can recover latent fingerprints on human skin surfaces. Four fingerprint powders, Magnetic Jet Black, Magnetic Silver, Silver Special, Swedish Black, and two other methods, cyanoacrylate fuming (CA) and Ruthenium tetroxide (RTX), were used. Having examined skin surfaces with a forensic light source, we observed that the fingerprint impressions remained visible up to 15 min after intentionally placing them on the skin surface of living subjects and dead bodies. Finger marks were recovered and positive results were achieved with Magnetic Black and Swedish Black powder on living subjects. On dead bodies finger marks treated with cyanoacrylate were visible but those treated with RTX, Swedish Black and Magnetic Jet Black powder were useful for potential comparison. On dead bodies best results were obtained with RTX method.     

To a hammer, everything looks like a nail

Legal context: Trade mark oppositions are routinely filed by brand owners againstan offending application or registration in either a pre-grantor a post-grant procedure before the respective national trademark office, but in Japan, there are several nuanced trade markopposition practice differences that should not be taken forgranted. Key issues: In light of persisting and recent abysmal trade mark opponentsuccess rates, favourable trade mark invalidation appeal (IA)data, and the inherent procedural handicaps against opponentsin Japan's current trade mark opposition system, Trade markowners would be better served by using Japan's trade mark IAprocedures to police against conflicting trade marks in Japanand not mechanistically file oppositions in Japan as one couldin other important trade mark jurisdictions like the USA orEurope. Practical significance: Japan's trade mark opposition and IA procedures offer complementaryoptions to police against conflicting trade marks so choosingthe right procedure is critical to its achieving the mission'ssuccess in curbing competitors' marks in the world's secondlargest free market economy.