Lipidic compounds found in soils surrounding human decomposing bodies and its use in forensic investigations – A narrative review

Following decomposition of a human body, a variety of decomposition products, such as lipids, are released into the surrounding environment, e.g. soils. The long-lasting preservation in soils and their high diagnostic potential have been neglected in forensic research. Furthermore, little is known about the preservation, chemical transformation, or degradation of those human derived lipids in soils. To date, several studies identified various lipids such as long-chain free fatty acids and steroids in soils that contained decomposition fluids. Those lipids are preserved in soils over time and could serve as markers of human decomposition in forensic investigations, e.g. for estimating the post-mortem interval or identifying the burial location of a human body. Therefore, this review focuses on the current literature regarding fatty acid and steroid that have been detected in soils and associated with human body decomposition. After a short introduction about human decomposition processes, this review summarises fatty acid and steroid analysis applied in current case studies and studies related to taphonomic research. This review provides an overview of the available studies that have used fatty acids and steroids as identifiers of human decomposition fluid in soils in a forensic context and discusses the potential for developing this innovative field of research with direct application in a forensic context.     

Preparation of a low-cost fingerprint powder that harnesses white light to emit long-lived phosphorescence

An inexpensive, commercially available doped strontium aluminate phosphor with long-lived afterglow has been prepared and assessed in the role of a luminescent fingerprint dusting powder. Blue, green, and aqua phosphorescence persisting for ca. 30 s was obtainable from treated fingermarks after charging the powders with the white light (400–700 nm) setting of a forensic light source. Imaging the phosphorescent afterglow enabled the elimination of background emissions encountered during latent fingermark examination. This was demonstrated by visualising fingermarks on substrates that possess inbuilt fluorescent security features and highly patterned substrate backgrounds, without any need for bespoke scientific equipment.     

Background levels of body fluids and DNA on the shaft of the penis and associated underpants in the absence of sexual activity

This study examines the background of blood, saliva, semen and autosomal DNA on penile swabs and underpants from males in the absence of recent sexual activity. Based on the data collected by the AFSP Body Fluid Forum, the results of this study show that; there is a very low expectation of detecting blood on penile swabs and male underpants; a low expectation of detecting saliva on penile swabs and male underpants; and spermatozoa would be expected in less than a quarter of penile swabs and three quarters of male underpants. As none of the samples had detectable levels of DNA which were suitable for meaningful comparison that did not match the donor or their partner, the expectation of detecting a DNA profile from the cellular background on penile swabs or underpants from a male who has not been involved in recent sexual intercourse is very low. The results of this study are extremely informative when evaluating the significance of blood, saliva, semen and DNA detected on the penile swabs and underpants of males in cases of alleged sexual assault.     

Sentencing data-driven cybercrime. How data crime with cascading effects is tackled by UK courts

This paper contributes to research seeking to understand if and how legislation can effectively counter cybercrimes that compromise personal data. These ‘data crimes’, which are the ‘dark side’ of big data and the data economy enabled by cloud computing, display cascading effects, in that they empower disparate criminals to commit further crimes and victimise a broad range of individuals or data subjects. The paper addresses the under-researched area of sentencing, which, as the last step of the judicial process, plays a crucial role in how the law is interpreted and implemented.This paper investigates courts’ approach to the evolving technological environment of cybercrime captured by data crime and the cascade effect and whether the cascade effect can assist courts in dealing with data-driven cybercrime. The paper examines original data collected from UK courts, namely 17 sentencing remarks relating to cybercrime court cases decided in England & Wales between 2012 and 2019. The analysis shows that courts appreciate the impact of data crime and their cascading effects, but that the complexity of the offences is lost at sentencing, arguably due to the negative impact of systemic factors, such as technology neutral law and the lack of legal authorities.After examining such systemic factors, the paper suggests how the cascade effect could aid sentencing by adding specificity and context to data crime. The paper ends with avenues for further research relating to debates on fair cybercrime sentencing and open justice.     

Informing regional taphonomy research using retrospective forensic anthropology cases in the Western Cape,South Africa

The post-mortem interval (PMI) is important in death investigations as it can assist in reconstructing the context of the case and the identification of the unknown individual. However, in some instances the PMI is challenging to estimate due to the absence of regional taphonomy standards. To conduct accurate and locally relevant forensic taphonomy research, investigators require insight into the regional hotspot recovery areas. Thus, forensic cases examined by the Forensic Anthropology Cape Town (FACT) in the Western Cape (WC) province of South Africa between 2006 and 2018 (n = 172 cases; n = 174 individuals) were retrospectively reviewed. In our study, a considerable number of individuals did not have the PMI estimations (31 %; 54/174) and the ability to estimate a PMI was significantly associated with skeletal completeness, unburnt remains, absence of clothing and the absence of entomological evidence (p < 0.05 for each). Significantly fewer cases had the PMI estimated after FACT was formalised in 2014 (p < 0.0001). One third of cases with PMI estimations were made with large open-ended ranges, making them less informative. Factors significantly associated with these broad PMI ranges were fragmented remains, absence of clothing and absence of entomological evidence (p < 0.05 for each). Most decedents (51 %; 87/174) were discovered in police precincts from high crime areas, yet a considerable number (47 %; 81/174) were also found in low crime and sparsely populated areas regularly used for recreational activities. Common sites of body discovery were vegetated areas (23 %; 40/174), followed by the roadside (15 %; 29/174), aquatic environments (11 %; 20/174) and farms (11 %; 19/174). Decedents were discovered exposed (35 %; 62/174), covered with items such as bedding or shrubs (14 %; 25/174) or buried (10 %; 17/174). Our data highlight gaps in forensic taphonomy studies and clearly informs what regional research is needed. Overall, our study demonstrates how forensic case information can inform regional forensic taphonomy studies to locate common areas and contexts for the discovery of decomposed bodies and encourages similar studies in other areas of the world.     

Assessing the background levels of body fluids on hands

Forensic scientists are often asked to assist the court by evaluating the significance of finding body fluids on the hands of an individual; however, there is an absence of published data regarding the background levels of body fluids on hands. Whilst the scientist can use casework experience to inform the courts on the significance of the results, it would be advantageous to have data which could assist with this interpretation. This study was designed to ascertain the background levels of blood, semen, saliva, hairs/fibres and staining/debris on hands in the general population by sampling from delegates attending a scientific conference.The findings suggest that approximately one third of the population would be expected to have hairs or fibres on their hands and that females are more likely to have visible staining on their hands than males. Presumptive tests for blood and semen yielded negative results in all samples; however, almost 2 % of the samples were found to contain a very low number of sperm heads. In contrast, the majority of samples tested positive for the presence of saliva using the presumptive Phadebas® amylase test. The data supports the caution applied by forensic practitioners when evaluating the presence of saliva detected using the presumptive Phadebas® amylase test based on the lack of specificity and indicates that the RSID™-Saliva test would be more suitable to use.     

Extended reality (XR) virtual practical and educational eGaming to provide effective immersive environments for learning and teaching in forensic science

Online virtual learning resources have been available for learning and teaching in forensic science for some years now, but the recent global COVID-19 related periods of irregular lockdown have necessitated the rapid development of these for teaching, learning and CPD activities. However, these resources do need to be carefully constructed and grounded in pedagogic theory to be effective. This article details eXtended Reality (XR) learning and teaching environments to facilitate effective online teaching and learning for forensic geoscientists. The first two case studies discussed in this article make use of Thinglink software to produce virtual learning and teaching XR resources through an internet system, which was delivered to undergraduate students in 2021. Case one details a range of XR virtual laboratory-based equipment resources, providing a consistent, reliable and asynchronous learning and teaching experience, whilst the second case study presents an XR virtual learning applied geophysics resource developed for a 12-week CPD training programme. This programme involves recorded equipment video resources, accompanying datasets and worksheets for users to work through. Both case studies were positively received by learners, but there were issues encountered by learners with poor internet connections or computer skills, or who do not engage well with online learning. A third case study showcases an XR educational forensic geoscience eGame that was developed to take the user through a cold case search investigation, from desktop study through to field reconnaissance and multi-staged site investigations. Pedagogic research was undertaken with user questionnaires and interviews, providing evidence that the eGame was an effective learning and teaching tool. eGame users highly rated the eGame and reported that they raised awareness and understanding of the use of geophysics equipment and best practice of forensic geoscience search phased investigations. These types of XR virtual learning digital resources, whilst costly to produce in terms of development time and staff resource, provide a complementary virtual learning experience to in-situ practical sessions, and allow learners to asynchronously familiarise themselves with equipment, environments and techniques resulting in more efficient use of in situ time. The XR resources also allow learners to reinforce learning post in-situ sessions. Finally, XR resources can provide a more inclusive and authentic experience for learners who cannot attend or complete work synchronously.     

Finding the missing and unknown: Novel educational approaches to warming up cold cases

In recent years, students in police academies and higher education institutions around the world have worked together to analyse cold cases including long-term missing persons cases in collaboration with investigators and prosecutors. In 2020, three European organisations, the Police Expert Network on Missing Persons (PEN-MP), AMBER Alert Europe and Locate International, succeeded in connecting these educational organisations enabling them to work collectively on cases and conduct cold case analyses (CCA) across international borders. The International Cold Case Analysis Project (ICCAP) learning objectives were to 1) collect the necessary information about the victim, 2) reconstruct the crime, and 3) investigate trace control.In a learning objective-based evaluation using Computer-Assisted Web Interviewing, 76 participating students from the German and International ICCAP teams were asked to complete a pre- and post-review questionnaire to self-assess their personal competence development. Participants reported significant increases in competence in all evaluated areas, thus demonstrating that authentic and relevant collaborations can enrich the learning environment, promote the use of professional skills, and provide significant knowledge exchange opportunities between academia and industry.Drawing on case studies of cold case missing persons' investigations and unidentified found remains, this article shares how university academics, students and community volunteers can work together nationally and internationally to find out what has happened to missing people and how we can more effectively identify the previously unidentified. In so doing, we share the expertise required to progress these cold cases and provide recommendations to support other institutions and organisations in adopting this innovative approach.     

Restoration of engraved marks on steel surfaces by etching technique

It is known that restoration of erased engraved identification marks on the engine and the chassis of a car or on a firearm has low success rate. Unlike stamping, engraving on a metal surface leaves no pronounced, permanent subsurface deformation in the crystalline structure, also called dislocation that can be revealed by suitable methods. Hence, the current research work investigated whether metallographic reagents used in the restoration of stamp (compression) marks could be applied to recover engraved marks on steel surfaces and also to establish the sensitivity and effectiveness of some of these reagents for the restoration of the marks. Experiments were conducted by mechanically engraving alphanumeric characters on several steel plates using a computer controlled engraving machine called Gravograph. The markings were later erased from the above steel plates by removing the metal in stages of 0.01 mm through 0.04 mm below the bottom of the engraving. Several plates were thus prepared wherein each one had been abraded to a specific depth. Then eight metallographic reagents were tested on each one of the above erased plates using a swabbing technique. The results had shown that while most of the reagents were able to restore marks up to certain levels of erasure, the reagent 5 g copper sulphate, 60 ml water, 30 ml concentrated ammonium hydroxide and 60 ml concentrated hydrochloric acid restored marks erased to a depth of 0.04 mm below the engraving depth, thus presenting itself the most sensitive reagent. Quite significantly, the above reagent was also able to decipher successfully the original engraved marks that had been erased and engraved with a new number, or obliterated by centre punching. The results of this research work should benefit the forensic practitioners engaged in the serial number recovery on vehicles, firearms and other objects.     

Development of etching paste for serial number restoration on aluminum engine block

Engine numbers, which involve information regarding the engine type, production number, and year and place of manufacture, are used for identification purposes. Comprising of unique alphanumeric characters, the engine numbers are fully or partially obliterated especially in auto theft and smuggling cases to conceal the origin, identity, and owner of vehicles. The limitations of the current restoration techniques such as the difficulty of using chemical liquid etching in vertical sites, the restrictions of magnetic and optical methods, and the applicability of several techniques like electron backscatter diffraction only in the laboratory environment prompt the development of new techniques. In view of these limitations and the importance of restoring engine numbers in criminal investigations, this unique study aimed to develop an etching paste that would restore the effaced characters on a real aluminum alloy engine block. The characters which were cold-stamped on the engine block were milled at varying depths and restoration attempts were conducted using etching pastes formed with different chemicals and materials. The analyses indicate that the etching paste formed with 200 mg of perlite, 400 mg of iron powder, and 450 μL of 20 M NaOH provided restoration to a good extent. The prevention of over-etching through the controlling of the chemical reaction and the cost-effectiveness appears to be the advantages of this technique. The success of recovery on the real engine block, the facilitation of restoration on curved surfaces, and the chance of on-site usage will likely make the etching paste a widely used tool in serial number restoration.