Informing regional taphonomy research using retrospective forensic anthropology cases in the Western Cape,South Africa

The post-mortem interval (PMI) is important in death investigations as it can assist in reconstructing the context of the case and the identification of the unknown individual. However, in some instances the PMI is challenging to estimate due to the absence of regional taphonomy standards. To conduct accurate and locally relevant forensic taphonomy research, investigators require insight into the regional hotspot recovery areas. Thus, forensic cases examined by the Forensic Anthropology Cape Town (FACT) in the Western Cape (WC) province of South Africa between 2006 and 2018 (n = 172 cases; n = 174 individuals) were retrospectively reviewed. In our study, a considerable number of individuals did not have the PMI estimations (31 %; 54/174) and the ability to estimate a PMI was significantly associated with skeletal completeness, unburnt remains, absence of clothing and the absence of entomological evidence (p < 0.05 for each). Significantly fewer cases had the PMI estimated after FACT was formalised in 2014 (p < 0.0001). One third of cases with PMI estimations were made with large open-ended ranges, making them less informative. Factors significantly associated with these broad PMI ranges were fragmented remains, absence of clothing and absence of entomological evidence (p < 0.05 for each). Most decedents (51 %; 87/174) were discovered in police precincts from high crime areas, yet a considerable number (47 %; 81/174) were also found in low crime and sparsely populated areas regularly used for recreational activities. Common sites of body discovery were vegetated areas (23 %; 40/174), followed by the roadside (15 %; 29/174), aquatic environments (11 %; 20/174) and farms (11 %; 19/174). Decedents were discovered exposed (35 %; 62/174), covered with items such as bedding or shrubs (14 %; 25/174) or buried (10 %; 17/174). Our data highlight gaps in forensic taphonomy studies and clearly informs what regional research is needed. Overall, our study demonstrates how forensic case information can inform regional forensic taphonomy studies to locate common areas and contexts for the discovery of decomposed bodies and encourages similar studies in other areas of the world.     

The effects of four different solvent vapours on the restoration of obliterated stamp markings from five different wooden surfaces

The stamp markings on wooden surfaces, which are placed on trees and products including antiques, indicate the status of trees and involve identifying data regarding the products. Such markings are obliterated either to facilitate illegal logging or to conceal product information. Despite the wide literature on the restoration of obliterated characters on metal and polymer surfaces, the recovery of defaced characters on wooden surfaces appears to be understudied. Several reference texts in the forensic marks’ examination literature suggest that water, water vapor, and alkaline solutions are useful in restoring the abraded markings on the wood. Since there does not seem to be any experimental study proving such success, this study aimed to fill this gap. This study conducted experimental research by using water, ethanol, ammonia, and chloroform to recover the scraped characters on samples obtained from walnut, beech, spruce, oak, and cedar trees. The cold-stamped characters, which were defaced at varying depths, were restored using vapor and liquid phases of four solvents. While the vapor phases of water, ethanol, and ammonia yielded good outcomes on all types of wooden surfaces, the liquid phases did not seem to be useful in the revisualization process. The response of the vapors, which varied between 62 and 220 s, depended on the type of wood. The restoration technique developed in this research offers the possibility of on-site usage, easy application, utilization of low-cost solvents, rapid recovery, and effectiveness on various wooden surfaces. Overall, the restoration methodology used in this research appears to be fruitful in retrieving identifying information on wooden samples.     

Lipidic compounds found in soils surrounding human decomposing bodies and its use in forensic investigations – A narrative review

Following decomposition of a human body, a variety of decomposition products, such as lipids, are released into the surrounding environment, e.g. soils. The long-lasting preservation in soils and their high diagnostic potential have been neglected in forensic research. Furthermore, little is known about the preservation, chemical transformation, or degradation of those human derived lipids in soils. To date, several studies identified various lipids such as long-chain free fatty acids and steroids in soils that contained decomposition fluids. Those lipids are preserved in soils over time and could serve as markers of human decomposition in forensic investigations, e.g. for estimating the post-mortem interval or identifying the burial location of a human body. Therefore, this review focuses on the current literature regarding fatty acid and steroid that have been detected in soils and associated with human body decomposition. After a short introduction about human decomposition processes, this review summarises fatty acid and steroid analysis applied in current case studies and studies related to taphonomic research. This review provides an overview of the available studies that have used fatty acids and steroids as identifiers of human decomposition fluid in soils in a forensic context and discusses the potential for developing this innovative field of research with direct application in a forensic context.     

Extended reality (XR) virtual practical and educational eGaming to provide effective immersive environments for learning and teaching in forensic science

Online virtual learning resources have been available for learning and teaching in forensic science for some years now, but the recent global COVID-19 related periods of irregular lockdown have necessitated the rapid development of these for teaching, learning and CPD activities. However, these resources do need to be carefully constructed and grounded in pedagogic theory to be effective. This article details eXtended Reality (XR) learning and teaching environments to facilitate effective online teaching and learning for forensic geoscientists. The first two case studies discussed in this article make use of Thinglink software to produce virtual learning and teaching XR resources through an internet system, which was delivered to undergraduate students in 2021. Case one details a range of XR virtual laboratory-based equipment resources, providing a consistent, reliable and asynchronous learning and teaching experience, whilst the second case study presents an XR virtual learning applied geophysics resource developed for a 12-week CPD training programme. This programme involves recorded equipment video resources, accompanying datasets and worksheets for users to work through. Both case studies were positively received by learners, but there were issues encountered by learners with poor internet connections or computer skills, or who do not engage well with online learning. A third case study showcases an XR educational forensic geoscience eGame that was developed to take the user through a cold case search investigation, from desktop study through to field reconnaissance and multi-staged site investigations. Pedagogic research was undertaken with user questionnaires and interviews, providing evidence that the eGame was an effective learning and teaching tool. eGame users highly rated the eGame and reported that they raised awareness and understanding of the use of geophysics equipment and best practice of forensic geoscience search phased investigations. These types of XR virtual learning digital resources, whilst costly to produce in terms of development time and staff resource, provide a complementary virtual learning experience to in-situ practical sessions, and allow learners to asynchronously familiarise themselves with equipment, environments and techniques resulting in more efficient use of in situ time. The XR resources also allow learners to reinforce learning post in-situ sessions. Finally, XR resources can provide a more inclusive and authentic experience for learners who cannot attend or complete work synchronously.     

Assessing the background levels of body fluids on hands

Forensic scientists are often asked to assist the court by evaluating the significance of finding body fluids on the hands of an individual; however, there is an absence of published data regarding the background levels of body fluids on hands. Whilst the scientist can use casework experience to inform the courts on the significance of the results, it would be advantageous to have data which could assist with this interpretation. This study was designed to ascertain the background levels of blood, semen, saliva, hairs/fibres and staining/debris on hands in the general population by sampling from delegates attending a scientific conference.The findings suggest that approximately one third of the population would be expected to have hairs or fibres on their hands and that females are more likely to have visible staining on their hands than males. Presumptive tests for blood and semen yielded negative results in all samples; however, almost 2 % of the samples were found to contain a very low number of sperm heads. In contrast, the majority of samples tested positive for the presence of saliva using the presumptive Phadebas® amylase test. The data supports the caution applied by forensic practitioners when evaluating the presence of saliva detected using the presumptive Phadebas® amylase test based on the lack of specificity and indicates that the RSID™-Saliva test would be more suitable to use.     

Background levels of body fluids and DNA on the shaft of the penis and associated underpants in the absence of sexual activity

This study examines the background of blood, saliva, semen and autosomal DNA on penile swabs and underpants from males in the absence of recent sexual activity. Based on the data collected by the AFSP Body Fluid Forum, the results of this study show that; there is a very low expectation of detecting blood on penile swabs and male underpants; a low expectation of detecting saliva on penile swabs and male underpants; and spermatozoa would be expected in less than a quarter of penile swabs and three quarters of male underpants. As none of the samples had detectable levels of DNA which were suitable for meaningful comparison that did not match the donor or their partner, the expectation of detecting a DNA profile from the cellular background on penile swabs or underpants from a male who has not been involved in recent sexual intercourse is very low. The results of this study are extremely informative when evaluating the significance of blood, saliva, semen and DNA detected on the penile swabs and underpants of males in cases of alleged sexual assault.     

Sentencing data-driven cybercrime. How data crime with cascading effects is tackled by UK courts

This paper contributes to research seeking to understand if and how legislation can effectively counter cybercrimes that compromise personal data. These ‘data crimes’, which are the ‘dark side’ of big data and the data economy enabled by cloud computing, display cascading effects, in that they empower disparate criminals to commit further crimes and victimise a broad range of individuals or data subjects. The paper addresses the under-researched area of sentencing, which, as the last step of the judicial process, plays a crucial role in how the law is interpreted and implemented.This paper investigates courts’ approach to the evolving technological environment of cybercrime captured by data crime and the cascade effect and whether the cascade effect can assist courts in dealing with data-driven cybercrime. The paper examines original data collected from UK courts, namely 17 sentencing remarks relating to cybercrime court cases decided in England & Wales between 2012 and 2019. The analysis shows that courts appreciate the impact of data crime and their cascading effects, but that the complexity of the offences is lost at sentencing, arguably due to the negative impact of systemic factors, such as technology neutral law and the lack of legal authorities.After examining such systemic factors, the paper suggests how the cascade effect could aid sentencing by adding specificity and context to data crime. The paper ends with avenues for further research relating to debates on fair cybercrime sentencing and open justice.     

Finding the missing and unknown: Novel educational approaches to warming up cold cases

In recent years, students in police academies and higher education institutions around the world have worked together to analyse cold cases including long-term missing persons cases in collaboration with investigators and prosecutors. In 2020, three European organisations, the Police Expert Network on Missing Persons (PEN-MP), AMBER Alert Europe and Locate International, succeeded in connecting these educational organisations enabling them to work collectively on cases and conduct cold case analyses (CCA) across international borders. The International Cold Case Analysis Project (ICCAP) learning objectives were to 1) collect the necessary information about the victim, 2) reconstruct the crime, and 3) investigate trace control.In a learning objective-based evaluation using Computer-Assisted Web Interviewing, 76 participating students from the German and International ICCAP teams were asked to complete a pre- and post-review questionnaire to self-assess their personal competence development. Participants reported significant increases in competence in all evaluated areas, thus demonstrating that authentic and relevant collaborations can enrich the learning environment, promote the use of professional skills, and provide significant knowledge exchange opportunities between academia and industry.Drawing on case studies of cold case missing persons' investigations and unidentified found remains, this article shares how university academics, students and community volunteers can work together nationally and internationally to find out what has happened to missing people and how we can more effectively identify the previously unidentified. In so doing, we share the expertise required to progress these cold cases and provide recommendations to support other institutions and organisations in adopting this innovative approach.     

The effectiveness of strong afterglow phosphor powder in the detection of fingermarks

There are numerous types of fluorescent fingermark powders or reagents used with the visualization of latent fingermarks deposited on multicolored substrate surfaces that can present a contrast problem if developed with regular fingermark powders. The developed fingermarks can show bright fluorescence upon exposure to laser, ultraviolet light and other light sources. These kinds of methods share a common concern, where surfaces and other substrates may fluoresce also. To overcome this concern, we have developed a phosphor powder which offers a strong afterglow effect which aid in the establishment of better fingermark detection. With the advent of a phosphor powder no special devices are required and the results obtained from fresh or a few days aged latent fingermarks left on: non-porous; semi-porous and also on some porous surfaces have been good. The strong afterglow effect offered by phosphor powder is also applicable for cyanoacrylate fumed fingermarks. Lift off and photography procedures of the developed fingermarks are incorporated in this paper.     

Quantitative evaluation of latent fingermarks with novel enhancement and illumination

A variety of suspended silica and metal nanoparticles have been used over the last 20 years to enhance latent fingermarks. This study quantitatively evaluates enhancement of natural and sebum-enriched fingermarks from three adult subjects acquired with a consistent applied force on glass with a fingermark press using suspended commercially available polystyrene (PS) particles. Images of the enhanced fingermarks acquired with total internal reflection (TIR), or standard overhead white light (WL), illumination are compared with fingermarks enhanced with conventional methods including cyanoacrylate fuming. The different enhancement and illumination methods are quantified based on the brightness and contrast of the fingermark images, as well as the number of minutiae that can be identified and matched to those on an inked manually acquired “template” fingermark using automatic fingerprint identification system (AFIS) software. Enhanced fingermarks acquired with the press are shown to be more consistent than manually acquired fingermarks based on these metrics. The results demonstrate that TIR illumination from a large-area illuminator built in house gives enhanced fingermark images with more matched minutiae and contrast superior to that for WL illumination for all types of enhancement. “Wet-powdering” with PS particles gives fingermark images that are for the most part comparable in terms of the number of matched minutiae to fingermarks enhanced with more conventional methods, suggesting that this novel enhancement method has a performance comparable to conventional enhancement methods. Interestingly, the age of the fingermark appears to have almost no effect on this new type of enhancement; sebum-enriched fingermarks ranging in age from 12 h to 435 days appear to have statistically identical numbers of matched minutiae.     

Enhanced Visualization of Latent Fingermarks on Rough Aluminum Surfaces Using Sequential Au and Zn/ZnS/ZnO Depositions

Detection and visualization of fingermarks on rough and diffuse surfaces is a relatively challenging task. We succeeded in developing latent fingermarks on scratched and rough aluminum surfaces by sequential deposition of a thin layer of gold followed by one of zinc or zinc‐based compounds on the fingermarks. The best image enhancement was achieved with sequential Au and ZnS depositions. Using this combination, we could enhance the visualization of latent fingermarks aged over 65 days in normal conditions. The optical reflectance from the fingermarks with the deposited layers of metal/dielectric is analyzed as a stratified medium. Significant contrast in the reflectance from the regions of the ridges and the valleys of the fingermark would enhance the visualization. Our results show that the Au and ZnS bi‐layer combination can have a large reflection contrast and improved fingermark visualization at wavelengths corresponding to the green light for specific thickness of ZnS.     

An investigation into the enhancement of fingermarks in blood on paper with genipin and lawsone

The abilities of two natural products, genipin and lawsone, to enhance blood contaminated fingermarks on papers of various porosities and colour were investigated and compared to the routinely used amino acid reagents, ninhydrin and 1,8-diazafluoren-9-one (DFO).Fingermarks in blood were deposited as a split depletion series on various paper types and colours for ageing periods of 6 weeks, 4 weeks, 2 weeks and 1 week before enhancement. The developed marks were observed under different lighting conditions, recorded and graded by way of attributing quantitative data to each series.Results indicated that while genipin showed some potential as a reagent for the enhancement of latent fingermarks, it displayed no suitability for the enhancement of fingermarks in blood on paper. Lawsone also failed to successfully enhance either type of fingermark. Upon comparison of the results with those of ninhydrin and DFO it was found that ninhydrin displayed the highest success rate of development of these marks.     

Latent Fingermark Aging Patterns (Part IV): Ridge Width as One Indicator of Degradation

This fourth article of the series is taking an in‐depth analysis at the visible aging of latent fingermarks regarding changes in ridge widths over time. The objective is to quantify and statistically describe significant ridge size variations under controlled indoor conditions. The effect of three environmental variables are examined: type of secretion (sebaceous‐ and eccrine‐rich) and type of substrate (glass and polystyrene) when aged in three light conditions (direct natural light, shade, and dark). Prior to width measurements, fresh and aged fingermarks were powdered with titanium dioxide (TiO₂) and sequentially photographed at predetermined times over 6 months. Three independent observers measured the ridges from thirty predetermined locations using strategically placed intersecting lines on the print. Results indicate that fingermarks deposited on glass are more resilient to degradation compared with those deposited on plastic. The presence of direct natural light plays a negligible role on degradation compared to secretion and substrate types.     

Preliminary efficiency evaluation of development methods applied to aged sebaceous latent fingermarks

Latent fingermarks are important trace evidence found in crime scenes mainly used for identification purposes. Once deposited, the composition of samples changes over time influencing the efficacy of latent fingermark development methods. In this sense, the aims of this work were to characterize the fatty acid (FA) profile of sebaceous latent fingermarks by GC–FID and to preliminarily evaluate the development efficiency of enhancement methods (powder dusting, iodine fuming and silver nitrate method) in a 30-day period of aging under controlled parameters of temperature, photoperiod and humidity. Results showed that myristic (7.51 ± 0.76% − 13.39 ± 1.26%), palmitic (35.91 ± 1.07% − 40.81 ± 2.52%), stearic (6.67 ± 0.36% − 9.13 ± 0.36%) and oleic (18.08 ± 0.25% − 20.93 ± 0.26%) acid varied significantly (p < 0.05) over the 30-day period of analysis. Regarding development efficiency, fluorescent orange powder and the silver nitrate method also increased their efficacy to develop latent fingermarks over time while the iodine fuming method decreased its efficiency. Silver black powder had constant efficacy in the tested period. Changes in the constitution of sebaceous marks possibly influenced the development efficiency of enhancement techniques. This knowledge is important to better understand the kinetic of aging and its influence on the development method.     

Studies into exfoliation and coating of Egyptian blue in methanol for application to the detection of latent fingermarks

We have recently demonstrated that coated exfoliated Egyptian blue powder is effective for detecting latent fingermarks on a range of highly-patterned non-porous and semi-porous surfaces. In this extension of that work, we present our studies into an alternative approach to prepare exfoliated Egyptian blue coated with cetrimonium bromide and Tween® 20 using a simpler technique. The quality of the latent fingermarks developed with these exfoliated powders and the commercial powder were compared in a comprehensive study. Depletion series of natural fingermarks from a wide range of donors (12 males and females) deposited on non-porous (glass slides) and semi-porous (Australian banknotes) surfaces were used in this study. Enhancement in the performance of the coated exfoliated particles compared to the commercial powder was observed, particularly in the case of aged fingermarks and polymer banknotes as challenging substrates.     

Refining Fingermark Development using Diacetylene Copolymers on Difficult Surfaces,

In further work investigating the intriguing application of diacetylene copolymers in fingermark detection, methods were developed to control (inhibit or enhance) the diacetylene polymerization reaction in fingermarks treated with a mixture of the monomers 2,4‐hexadiyne‐1,6‐bis‐(phenylurethane) (HDDPU) and 2,4‐hexadiyne‐1,6‐bis(p‐chlorophenylurethane) (HDDCPU) in acetone solution. These methods included the use of a humidity chamber to reduce the amount of background development while promoting development on the fingermark, subjecting developed fingermarks to freezing temperatures and using a solvent to remove unreacted monomer in order to inhibit the polymerization reaction. Developed fingermarks were enhanced by conventional lighting (white light, filtered light) and fast Raman mapping, which was shown to be advantageous over FTIR imaging. This study also demonstrated the applicability of diacetylene copolymer solutions in the covert detection of fingermarks on difficult surfaces. Furthermore, fingermarks were successfully developed with good ridge detail on pig skin (used as a model for human skin, a notoriously difficult surface on which to develop fingermarks).     

An Investigation into the Effects of Force Applied During Deposition on Latent Fingermarks and Inked Fingerprints Using a Variable Force Fingerprint Sampler

Physical factors, including the magnitude of the force applied during fingermark deposition, may affect friction ridge surface area and clarity, and the quantity of residue transferred. Consistency between fingermarks may be required; for example, in research projects, yet differences between marks are likely to exist when physical factors are not controlled. Inked fingerprints and latent fingermarks were deposited at 1–10 N at 1 N increments using a variable force fingerprint sampler to control the force, angle of friction ridge and surface contact, and the duration of friction ridge and surface contact. Statistically significant differences existed between the length and width measurements of the inked prints (p ≤ 0.05), particularly at lower forces. Scanning electron microscopy and surface plot analysis demonstrated how differences in force applied during deposition affected ridge surface area, displacement of latent residue, and differences in the quantity of residue transferred. Consistency between inked prints was demonstrated at equivalent forces.     

The Effect of pH on Electrolyte Detection of Fingermarks on Cartridge Cases and Subsequent Microscopic Examination

Cartridge cases may contain deposited fingermarks when the firearm was loaded ( http://www.nij.gov/pubs-sum/225320.htm , J Forensic Sci, 53 , 2008 and 812). Cartridge cases can be individualized with microscopic examination. However, heat and friction degrades the deposited fingermark on the fired cartridge cases, if any on the surface. Also, unfired and fired cartridge cases are made of metal, which is a nonporous surface that does not retain fingermarks well ( http://www.nij.gov/pubs-sum/225320.htm ). This study tests the effects of pH level on fingermark clarity on brass fired and unfired cartridge cases and microscopic striation examination (MSE). Two trials were performed to determine the optimal pH in fingermark clarity for both types of cartridges. This was performed through immersion in six pH range solutions from dilutions of sulfuric acid and sodium hydroxide for 24 h for the purpose of enhancing the fingermarks on the metal. The use of the optimal neutral pH level is suggested because immersion of the cartridge cases in pH 1–3 and 3–5 affects MSE.     

Novel O‐propyl,S‐propyl,and N‐propyl substituted 1,4‐naphthoquinones and 1,4‐anthraquinones as potential fingermark development reagents for porous surfaces

Lawsone is a 2‐substituted‐1,4‐naphthoquinone derivative, which has been proposed as an alternative to the reagents currently used for fingermark detection on porous surfaces. 2‐substituted‐anthraquinones, which contain an additional conjugated benzene ring, have a similar chemical structure to that of lawsone. In this study, a new series of 2‐substituted‐1,4‐naphthoquinones and 2‐substituted‐1,4‐anthraquinones were synthesized and completely characterized by¹H NMR,¹³C NMR, IR, and HPLC‐TOF/MS analyses. All newly synthesized 2‐substituted‐1,4‐quinones were investigated for their ability to develop latent fingermarks on porous surfaces, and this ability was compared with that of lawsone. Each fingermark developed was graded using an established method; thus, quantitative data were attributed to each fingermark. It has been demonstrated that the 1,4 ‐ quinones react with amino acids present in latent fingermarks on selected paper surfaces to produce faint yellow‐orange impressions, which exhibit strong photoluminescence when illuminated with a forensic light source at 440 nm and observed through a red filter. None of the compounds caused background darkening. The results obtained were generally similar to those of lawsone, however, 8‐dibromo‐2‐(propylamino)naphthalene‐1,4‐dione and 5,8‐dibromo‐2‐(propylthio)naphthalene‐1,4‐dione yielded better results for copier paper and colored (blue) copier paper used in this analysis. To the best of our knowledge, this is the first study to examine the role of 1,4‐anthraquinone derivatives as potential fingermark development reagents. The results indicate that 1,4‐quinones have a potential to be used as reagents for enhancement of latent fingermarks.