A comparative evaluation of the disulfur dinitride process for the visualisation of fingermarks on metal surfaces

The disulfur dinitride process for fingermark visualisation was first reported a decade ago, with promising results obtained for a range of materials including metals. However, the friction sensitive nature of the material and difficulty of synthesis made routine use difficult. Many of these issues have since been addressed, making equipment and chemicals available to build an understanding of how the effectiveness of disulfur dinitride compares to other fingermark visualisation processes currently used on metal surfaces. This enables more informed advice to be given on selection of processes for treatment of metal items, an area of operational interest that encompasses weapons used in violent crime and the increasing incidence in metal theft. This paper reports a comparative study into the effectiveness of disulfur dinitride, cyanoacrylate fuming, vacuum metal deposition, gun blueing and wet powder suspensions on brass, bronze, copper and stainless steel. Experiments were conducted with the surfaces exposed to a range of environments including long term ageing, water/detergent washing, acetone washing and high temperature exposure. The results indicate that disulfur dinitride is an effective process for fingermark visualisation on metal surfaces, including those exposed to adverse environments, and may offer potential improvements over existing processes for those surfaces. Further work, including pseudo-operational trials, is recommended.     

Development of Latent Fingermarks on Surfaces of Food‐A More Realistic Approach

Latent fingermark developing methods from food (mandarin, egg, banana, apple, potato, carrot, eggplant, onion, bell pepper, and tomato) surface has been studied by 10 methods, including powdering method, small particle reagent method, and cyanoacrylate fuming method. The foods were stored under two conditions (room temperature and refrigerator) before fingermark deposition and aged for 2, 24, 48, and 72 h before fingermark development. In most of the food surfaces used in this study, cyanoacrylate fuming with 80% relative humidity was superior to the powder or small particle reagent methods. The quality of the fingermarks varied depending on the storage conditions before the fingermark deposition (in the refrigerator or at ambient temperature) and the time elapsed since the fingermark deposition. However, the storage conditions before the fingermark deposition and the time elapsed since the fingermark deposition did not show any correlation with the quality of the fingermark.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

Development of Latent Fingermarks from Rocks and Stones

Since the beginning of recorded history, stones have been used in the commission of crimes due to their widespread availability. Stones can be used as a lethal weapon that sometimes might be the only evidence in a serious case. The common perception, even in professional fingermark circles, is that stones do not yield identifiable latent fingermarks. The authors of this research paper examined the feasibility of developing fingermarks from seven types of stones using three latent fingermark techniques: magnetic powder, cyanoacrylate fuming, and ninhydrin. The paper will demonstrate that by classifying stones and rocks according to their natural properties (porosity, permeability, and the nature of surface area), even application of the simplest development techniques can produce good results. In conclusion, chert and limestone yielded the most qualitative and quantitative results using magnetic powder. The time factor is also important in recovering latent fingermarks on stones and rocks.     

A Preliminary Study on Vacuum Metal Deposition as a Standalone Method for Enhancement of Fingermarks on Ballistic Brass Materials

In order to assess the efficacy of vacuum metal deposition (VMD) as a technique to develop fingermarks on ballistic metallic surfaces, a preliminary study using six donors (three male & three female) was conducted. Using a sequential metal deposition process, two metal combinations were studied—gold/zinc and silver/zinc. Results indicate the potential of this technique, by developing identifiable fingermarks on brass metal disks aged from a few days up to more than a month old. As the development of fingermarks on fired (brass) cartridge cases is an area of interest, a further study was conducted where a total of 20 fingermarks were deposited on cases. After firing, second level fingermark characteristics were successfully observed on cartridge cases highlighting its potential as a fingermark enhancement method for ballistic brass materials. Further work is required to fully evaluate the VMD process and its reliability as a fingermark enhancing method on ballistic surfaces.     

Fingermark detection on non-porous and semi-porous surfaces using YVO4:Er,Yb luminescent upconverting particles

This article describes the use of an anti-Stokes luminescent material (upconverter), yttrium vanadate doped with ytterbium and erbium (YVO(4):Er,Yb), for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes luminescent materials emit light at shorter wavelengths than the excitation wavelength. This property is unusual in both natural and artificial materials commonly found as exhibits in forensic science casework. As a result, fingermark detection techniques based on anti-Stokes luminescence are potentially extremely sensitive and selective. Latent fingermarks on non-luminescent and inherently luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with YVO(4):Er,Yb by dry powder and wet powder techniques. The effectiveness of YVO(4):Er,Yb for fingermark detection was compared with that of cyanoacrylate fuming and of sodium yttrium tetrafluoride doped with ytterbium and erbium (NaYF(4):Er,Yb). The results illustrate some benefit of luminescent up-converting phosphors over traditional luminescence techniques for the detection of latent fingermarks.     

The detection and enhancement of latent fingermarks using infrared chemical imaging

The use of a new technique, Fourier transform infrared (FTIR) chemical imaging, has been demonstrated for the enhancement of latent fingermarks on a number of surfaces. Images of untreated fingermarks on glass backgrounds with excellent ridge detail were acquired using infrared chemical imaging. High quality fingermarks on glass backgrounds were also developed using ethyl cyanoacrylate (super glue) fuming and subsequent infrared chemical imaging. This new method allows the collection of images from backgrounds that traditionally pose problems for current fingermark detection methods. The background may, for example, be highly colored, have a complex pattern, or possess other pattern or image characteristics that make it difficult to separate fingermark ridges using traditional optical or luminescent visualization. One background that has proven to be a challenging surface for the development of latent fingermarks is the Australian polymer banknote. To demonstrate the power and applicability of infrared chemical imaging, fingermarks fumed with ethyl cyanoacrylate were successfully imaged from Australian polymer banknotes.     

The effect of corrosive substances on fingermark recovery: A pilot study

Corrosive substance attacks have become a growing issue within the UK. Although most commonly occurring in gang-related offences, there are high profile instances where this type of attack has been used to attack women to disfigure and destroy livelihoods. Despite the increase in such attacks, there has been very little published research into the recovery of forensic evidence from items used in these crimes. The effect of corrosive substances on the recovery of different types of forensic evidence is unknown, and there is no guidance for laboratories processing exhibits contaminated with corrosive substances regarding optimum treatments. This pilot study focused on establishing the effectiveness of a range of fingermark visualisation processes in recovering fingermarks on surfaces exposed to concentrated sulfuric acid (acid) and potassium hydroxide (alkali). Results indicate that on non-porous surfaces vacuum metal deposition and powder suspensions remain effective, and on porous surfaces fingermarks could still be visualised with physical developer. Alkalis were found to be more detrimental than acid environments in this limited study. The results demonstrate that fingermark recovery is still feasible on surfaces exposed to corrosive substances and provides encouragement that treatment protocols could be developed for this type of exhibit.     

Exposing latent fingermarks on problematic metal surfaces using time of flight secondary ion mass spectroscopy

Fingermarks are a key form of physical evidence for identifying persons of interest and linking them to the scene of a crime. Visualising latent (hidden) fingermarks can be difficult and the correct choice of techniques is essential to develop and preserve any fingermarks or other (e.g. DNA) evidence that might be present. Metal surfaces (stainless steel in particular) have proven to be challenging substrates from which to reliably obtain fingermarks. This is a great cause for concern among police forces around the globe as many of the firearms, knives and other metal weapons used in violent crime are potentially valuable sources of fingermark evidence. In this study, a highly sensitive and non-destructive surface science technique called time of flight secondary ion mass spectroscopy (ToF-SIMS) was used to image fingermarks on metal surfaces. This technique was compared to a conventional superglue based fuming technique that was accompanied by a series of contrast enhancing dyes (basic yellow 40 (BY40), crystal violet (CV) and sudan black (SB)) on three different metal surfaces. The conventional techniques showed little to no evidence of fingermarks being present on the metal surfaces after a few days. However, ToF-SIMS revealed fingermarks on the same and similar substrates with an exceptional level of detail. The ToF-SIMS images demonstrated clear ridge definition as well as detail about sweat pore position and shape. All structures were found to persist for over 26?days after deposition when the samples were stored under ambient conditions.     

The effectiveness of strong afterglow phosphor powder in the detection of fingermarks

There are numerous types of fluorescent fingermark powders or reagents used with the visualization of latent fingermarks deposited on multicolored substrate surfaces that can present a contrast problem if developed with regular fingermark powders. The developed fingermarks can show bright fluorescence upon exposure to laser, ultraviolet light and other light sources. These kinds of methods share a common concern, where surfaces and other substrates may fluoresce also. To overcome this concern, we have developed a phosphor powder which offers a strong afterglow effect which aid in the establishment of better fingermark detection. With the advent of a phosphor powder no special devices are required and the results obtained from fresh or a few days aged latent fingermarks left on: non-porous; semi-porous and also on some porous surfaces have been good. The strong afterglow effect offered by phosphor powder is also applicable for cyanoacrylate fumed fingermarks. Lift off and photography procedures of the developed fingermarks are incorporated in this paper.     

Evaluation of the one-step Lumicyano™ used in the visualisation of fingermarks on fabrics

This study consisted of three parts to evaluate the performance of Lumicyano? on a variety of fabrics. One part assessed the impact of dye percentage (8%, 9% and 10%) on visualisation of fingermark detail and luminescent brightness in split grab marks. A 9% dye produced the highest quality detail of grab impressions with least interference from background fluorescence. The second part investigated the optimal relative humidity (RH, 75–84%) for certain fabric types using Lumicyano on split, six-series depletion fingermarks. It was concluded that the recommended RH of 80% remained the ideal cyanoacrylate fuming environment. The final and third part of this study determined the impact of sequential addition of Basic Yellow 40 (BY40) on Lumicyano compared to traditional cyanoacrylate (CA) followed with BY40 application. Results from this study demonstrated that Lumicyano on its own developed fingermarks with superior quality to Lumicyano with sequential addition of BY40 or traditional cyanoacrylate followed by BY40. Inclusion of more fabrics, donors and longer ageing periods should be explored in future studies to determine what frameworks are best for certain types of fabrics.     

Columnar‐Thin‐Film‐Assisted Visualization of Depleted Sebaceous Fingermarks on Nonporous Metals and Hard Plastics

A fingermark on a nonporous substrate can be developed by depositing a columnar thin film (CTF) on it, but the CTF technique's sensitivity for low‐quality fingermarks is unknown. The optimized CTF and traditional development of several depletion series of sebaceous‐loaded fingermarks were compared using a split‐print methodology as well as subjective and objective grading schemes, in a limited laboratory trial. CTF development was superior to development with selected traditional techniques on brass, anodized aluminum, black acrylonitrile butadiene styrene (ABS), and white nylon. On white ABS and black nylon, the CTF technique performed poorly but still as well as the best‐performing traditional development technique. The CTF technique was more sensitive on brass and anodized aluminum than, and as sensitive on the four hard plastics and stainless steel as, the best‐performing traditional technique. Thus, the CTF technique is useful to develop friction‐ridge detail from limited fingermark residue on some smooth substrates.     

Fingermark detection on non-porous and semi-porous surfaces using NaYF4:Er,Yb up-converter particles

This article describes the first use of an anti-Stokes material, or up-converter, for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes materials can absorb long-wavelength light and emit light at a shorter wavelength. This property is unusual in both natural and artificial materials and so fingermark detection techniques based on anti-Stokes luminescence are potentially sensitive and selective. Latent fingermarks on luminescent and non-luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with sodium yttrium tetrafluoride doped with erbium and ytterbium (NaYF(4):Er,Yb) by dry powder, wet powder, and cyanoacrylate staining techniques. This study illustrates the potential of up-converter phosphors for the detection of latent fingermarks.     

Immunolabeling and the compatibility with a variety of fingermark development techniques

Much information can be obtained from the chemical composition of a fingermark, which can be helpful in crime scene investigation. Immunolabeling can be used to extract information about the donor of the fingermark and it can also act as a fingermark development tool in sequence with the standard fingermark development techniques. However, before immunolabeling can be used in forensic practice more information on the possibilities and limitations of this technique is required. In this study, our aim was to investigate if immunolabeling is compatible with standard development protocols (indanedione-zinc, indanedione-zinc followed by ninhydrin spraying, physical developer, cyanoacrylate fuming, cyanoacrylate followed by basic yellow staining, lumicyanoacrylate fuming and polycyanoacrylate fuming). Immunolabeling was carried out successfully on all developed fingermarks, whereby dermcidin was selected as antigen of interest. We can conclude that immunolabeling is compatible with a wide variety of different fingermark developers. This finding in combination with previous findings, makes immunolabeling an interesting technique, which can be of great value in the forensic field.     

Styryl dye coated metal oxide powders for the detection of latent fingermarks on non-porous surfaces

Conventional fingermark powders rely on contrast induced by absorption/reflection (e.g. black powder) or luminescence in the visible region (e.g. Blitz Green(?)). In most cases, these powders provide sufficient contrast; however, in some circumstances surface characteristics can interfere with the visualisation of powdered fingermarks. Visualisation in the near infra-red (NIR) region, however, has been shown to eliminate interferences commonly encountered in the visible region. In this study, a mixture of rhodamine 6G and the NIR laser dye styryl 11 (STaR 11) was coated onto an aluminium oxide nanopowder and then mixed with silver magnetic powder to develop and visualise fingermarks in the NIR. When compared to Blitz Green(?), it was determined that the STaR 11 magnetic powder was better suited for marks deposited on textured surfaces and for older marks, whereas Blitz Green(?) performed better on smooth glossy surfaces. The ability of the STaR 11 mixed dye formulation to be visualised in both the visible and NIR regions also provides a significant advantage over conventional luminescent fingermark powders.     

Enhanced Visualization of Latent Fingermarks on Rough Aluminum Surfaces Using Sequential Au and Zn/ZnS/ZnO Depositions

Detection and visualization of fingermarks on rough and diffuse surfaces is a relatively challenging task. We succeeded in developing latent fingermarks on scratched and rough aluminum surfaces by sequential deposition of a thin layer of gold followed by one of zinc or zinc‐based compounds on the fingermarks. The best image enhancement was achieved with sequential Au and ZnS depositions. Using this combination, we could enhance the visualization of latent fingermarks aged over 65 days in normal conditions. The optical reflectance from the fingermarks with the deposited layers of metal/dielectric is analyzed as a stratified medium. Significant contrast in the reflectance from the regions of the ridges and the valleys of the fingermark would enhance the visualization. Our results show that the Au and ZnS bi‐layer combination can have a large reflection contrast and improved fingermark visualization at wavelengths corresponding to the green light for specific thickness of ZnS.     

Evaluation of Lumicyano™ cyanoacrylate fuming process for the development of latent fingermarks on plastic carrier bags by means of a pseudo operational comparative trial

There are a number of studies discussing recent developments of a one-step fluorescent cyanoacrylate process. This study is a pseudo operational trial to compare an example of a one-step fluorescent cyanoacrylate product, Lumicyano™, with the two recommended techniques for plastic carrier bags; cyanoacrylate fuming followed by basic yellow 40 (BY40) dyeing and powder suspensions. 100 plastic carrier bags were collected from the place of work and the items were treated as found without any additional fingermark deposition. The bags were split into three and after treatment with the three techniques a comparable number of fingermarks were detected by each technique (average of 300 fingermarks). The items treated with Lumicyano™ were sequentially processed with BY40 and an additional 43 new fingermarks were detected. Lumicyano™ appears to be a suitable technique for the development of fingermarks on plastic carrier bags and it can help save lab space and time as it does not require dyeing or drying procedures. Furthermore, contrary to other one-step cyanoacrylate products, existing cyanoacrylate cabinets do not require any modification for the treatment of articles with Lumicyano™. To date, there is little peer reviewed articles in the literature on trials related to Lumicyano™ and this study aims to contribute to fill this gap.     

The Effect of pH on Electrolyte Detection of Fingermarks on Cartridge Cases and Subsequent Microscopic Examination

Cartridge cases may contain deposited fingermarks when the firearm was loaded ( http://www.nij.gov/pubs-sum/225320.htm , J Forensic Sci, 53 , 2008 and 812). Cartridge cases can be individualized with microscopic examination. However, heat and friction degrades the deposited fingermark on the fired cartridge cases, if any on the surface. Also, unfired and fired cartridge cases are made of metal, which is a nonporous surface that does not retain fingermarks well ( http://www.nij.gov/pubs-sum/225320.htm ). This study tests the effects of pH level on fingermark clarity on brass fired and unfired cartridge cases and microscopic striation examination (MSE). Two trials were performed to determine the optimal pH in fingermark clarity for both types of cartridges. This was performed through immersion in six pH range solutions from dilutions of sulfuric acid and sodium hydroxide for 24 h for the purpose of enhancing the fingermarks on the metal. The use of the optimal neutral pH level is suggested because immersion of the cartridge cases in pH 1–3 and 3–5 affects MSE.     

Quantitative evaluation of latent fingermarks with novel enhancement and illumination

A variety of suspended silica and metal nanoparticles have been used over the last 20 years to enhance latent fingermarks. This study quantitatively evaluates enhancement of natural and sebum-enriched fingermarks from three adult subjects acquired with a consistent applied force on glass with a fingermark press using suspended commercially available polystyrene (PS) particles. Images of the enhanced fingermarks acquired with total internal reflection (TIR), or standard overhead white light (WL), illumination are compared with fingermarks enhanced with conventional methods including cyanoacrylate fuming. The different enhancement and illumination methods are quantified based on the brightness and contrast of the fingermark images, as well as the number of minutiae that can be identified and matched to those on an inked manually acquired “template” fingermark using automatic fingerprint identification system (AFIS) software. Enhanced fingermarks acquired with the press are shown to be more consistent than manually acquired fingermarks based on these metrics. The results demonstrate that TIR illumination from a large-area illuminator built in house gives enhanced fingermark images with more matched minutiae and contrast superior to that for WL illumination for all types of enhancement. “Wet-powdering” with PS particles gives fingermark images that are for the most part comparable in terms of the number of matched minutiae to fingermarks enhanced with more conventional methods, suggesting that this novel enhancement method has a performance comparable to conventional enhancement methods. Interestingly, the age of the fingermark appears to have almost no effect on this new type of enhancement; sebum-enriched fingermarks ranging in age from 12 h to 435 days appear to have statistically identical numbers of matched minutiae.     

Preparation of cyanoacrylate derivatives and comparison of dual action cyanoacrylate formulations

The use of cyanoacrylate followed by fluorescent reagents is well known in the field of fingermark visualisation. Treatment with fluorescent reagents that stain the cyanoacrylate deposits will not only enhance the visibility of fingermarks previously thought unusable, but also reveal previously unseen marks. Downside of this approach is the exposure of the evidential material to large amounts of solvent, such as water, methanol and ethanol, thereby potentially destroying other forensic traces.New cyanoacrylate derivates with fluorescent and UV-active properties can be used for one step dual action visualisation of latent fingermarks. Increased optical properties can be achieved by addition of functional groups via the Steglich esterification of cyanoacetic acid with N-(3-dimetylaminopropyl)-N′-ethylcarbodiimide (EDC). The UV-active ester can be created via the Knoevenagel condensation with formaldehyde to form poly-cyanoacrylate. These poly-cyanoacrylates can be depolymerised to form monomer cyanoacrylates.In this paper we compare these ethylcyanoacrylate derivatives with commercially available cyanoacrylate formulations.We have shown that the use of poly-cyanoacrylate derivatives can yield fully developed fingerprints. The initiator of the polymerisation reaction towards novel reagents can be altered according to the need for particular optical properties.