Improved method for DFO development of latent fingerprints

A new formulation has been developed for DFO stock solution. The working DFO solution, based on the new stock solution, appears to be more stable, has a longer shelf life, and has little effect on inks (and therefore does not cause inks to run). Photoluminescence spectra of latent fingerprints developed with DFO reagent have been measured and the choice of filters for excitation and emission (barrier) have been derived from these measurements. Comparisons of latent fingerprints developed with ninhydrin and DFO have been made using various papers and at various intensities. These comparisons show the much greater sensitivity of DFO developed latent fingerprints. Although enhanced ninhydrin and DFO develop latent fingerprints with similar sensitivity, the DFO process is much simpler.     

Rapid presumptive "fingerprinting" of body fluids and materials by ATR FT-IR spectroscopy

Human body fluids and materials were evaluated using attenuated total reflectance Fourier transform infrared spectroscopy. Purified proteins, cosmetics, and foodstuffs were also assayed with the method. The results of this study show that the sampled fluids and materials vary in the fingerprint region and locations of the amide I peaks because of the secondary structure of the composite proteins although the C = O stretch is always present. The distinct 1016 cm(-1) peak serves as a signature for semen. The lipid-containing materials (e.g., fingerprints, earwax, tears, and skin) can also be easily separated from the aqueous materials because of the strong CH(3) asymmetric stretch of the former. Blood-saliva and blood-urine mixtures were also successfully differentiated using combinations of peaks. Crime scene investigators employing rapid, portable, or handheld infrared spectroscopic instruments may be able to reduce their need for invasive, destructive, and consumptive presumptive test reagents in evaluating trace evidence.     

The spectroscopic detection of exogenous material in fingerprints after development with powders and recovery with adhesive lifters

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. The powders adhere to the ridge pattern of the fingerprint only, thus allowing the image to be visualised. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes to facilitate subsequent laboratory analysis. As with all recovered evidence these samples would be stored in evidence bags to allow secure transit from the scene to the laboratory and also to preserve the chain of evidence. In this paper, the application of Raman spectroscopy for the analysis of exogenous material in latent fingerprints is reported for contaminated fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. A selection of over the counter (OTC) analgesics were used as samples for the analysis and contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. In most cases background fluorescence attributed to the sebaceous content of the latent fingerprint was reduced by the application of the powder thus reducing spectral interference. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis of exogenous contaminants by Raman spectroscopy. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised in any way. Although the application of powders did not interfere with the detection process the time taken to locate the contaminant was increased due to the physical presence of more material within the fingerprint. The presence of interfering Raman bands from lifting tapes is another potential complication. This, however, could be removed by spectral subtraction or by the choice of lifting tapes that have only weak Raman bands.     

Enhancement of Latent Fingerprints on Fabric Using the Cyanoacrylate Fuming Method Followed by Infrared Spectral Mapping

A method has been developed for the visualization of latent fingerprints on fabrics, which is based upon cyanoacrylate (superglue) fuming followed by imaging using an infrared microscope. Results show that imaging on smooth, shiny fabrics such as polyester, silk, nylon, and acetate of different colors and patterns can give an improvement over existing enhancement methods. Results for cotton and polycotton were less successful and it is thought this may be due a combination of the presence of the carbonyl functional group in these fabrics as well as their absorbency to fingerprint sweat. The carbonyl peak (1700 cm^?1) provided the optimum spectroscopic feature to map and image a fingerprint. Comparisons between infrared mapping at a specific frequency range and principal component analysis showed that improved imaging was obtained with principal component analysis.     

The Use of Liquid Latex to Recover Latent Fingerprints that are Covered in Debris from Exterior Glass Surfaces of Vehicles

The purpose of this research is to determine if latent fingerprints deposited on the exterior glass surfaces of vehicles, then covered in debris, can be recovered. Past research used liquid latex to lift soot to recover trace evidence. Recently, liquid latex has been used to recover latent fingerprints along the bottom of vehicles. In this study, a total of 216 latent fingerprints were deposited on the exterior windows of three vehicles. Three control and three experimental latent fingerprints were placed on each side window. The vehicles collected debris for either 2, 3, or 4 weeks. After debris collection, liquid latex was applied to the experimental sections. The underlying fingerprints were developed with white granular powder. Control fingerprints were developed directly with white granular powder. A chi-square test revealed a significant difference in fingerprint recovery between the control and liquid latex method (X² = 9.026, d.f. = 1, p = 0.003). An odds ratio determined that the control method increases the probability of latent fingerprint recovery by 2.68. Fisher's exact test indicated that there is no statistically significant difference between the detail of the recovered control and experimental fingerprints (p = 0.065). This study demonstrates that recovery of fingerprints is possible using the liquid latex method; however, the control method recovers more fingerprints on the glass exterior of vehicles. If latent fingerprints are thought to be present on the exterior glass surfaces of vehicles, the control method should be used to improve vehicle processing by investigators.     

A novel chitosan/tripolyphosphate/L‐lysine conjugates for latent fingerprints detection and enhancement

Most chemical and physical methods employed in visualizing latent marks have shown detrimental effects on human health and, therefore, some research groups have directed their attention to the utilization of various (bio)polymers with the aforementioned purpose. Although chitosan is widely used in medicine, pharmacy, food, and drug delivery systems, there are very few studies that address this biopolymer utilization in forensic applications, such as the detection of latent fingerprints. We used chitosan crosslinked with sodium tripolyphosphate and conjugated with L‐lysine to enhance the visualization of latent fingerprints, due to its ability to interact with fingerprint sweat residues. These conjugates were prepared using different (w/w) amounts of chitosan and tripolyphosphate (6/1; 4/1; 1/1; 1/4; and 1/6), and those with the most promising results (i.e., 6/1 formulation) were investigated in detail. Fourier transform infrared (FT‐IR) spectroscopy confirmed interactions between components of the systems. Optical microscopy and scanning electron microscope (SEM) analysis showed that prepared powder formulations were uniform in size and confirmed that chitosan/tripolyphosphate/lysine conjugates bind easily to the sweat and lipid residues present in the latent fingerprints. The testing of prepared conjugates demonstrated the potential of these systems as bio‐based powder substitution for commercially available powders.     

TFD-2纸张手印快速显现系统的应用

目的介绍一种利用特殊的红外热成像技术显现常见纸张上汗潜手印的新方法。方法利用英国Foster4-Freeman公司生产的TFD-2纸张手印快速显现系统,通过特殊的红外热成像技术,使汗潜手印呈现强烈荧光,从而显现手印。结果红外热成像方法处理后,汗潜手印在特种激发光（带宽为450nm-510nm）激发下显出较强的橙色荧光;持续处理后,汗潜手印在自然光下呈棕褐色,并在短波紫外光源（254nm）激发下也可显出清晰连贯的手印纹线;而且,新鲜和陈旧手印均有较好的显现效果。结论TFD-2纸张手印快速显现系统显现纸张上汗潜手印的方法,具有操作简单、快速安全、无需化学试剂、显现效果明显的特点,适合推广使用。     

An already archived latent fingerprint as a DNA source for STR typing in a murder case

Former studies have shown that even a single skin contact, resulting in a latent fingerprint, can transfer enough DNA for genetic analysis. However, up to now latent fingerprints have usually not been used for DNA typing. In the present case the smeared trace of a hand was found in the suspect's car and archived. As it could not be evaluated in a classical manner, the evidence had to be examined by molecular genetic methods. DNA was extracted and typed in five different STR loci. Based on the yielded results, the significance of the findings is discussed.     

茚三酮固体介质法显现不同纸张表面潜指纹

茚三酮是显现渗透性客体上潜在汗液手印的最常用方法之一,采用微量物证提取纸和茚三酮溶液有机结合制作的茚三酮固体介质可以有效避免客体表面背景着色,不容易引起纸张油墨扩散,另外避免使用的溶剂易燃。能够更便捷的显现现场指纹,并且能够突破茚三酮只能显现渗透性客体的局限,拓宽茚三酮显现客体的范围,在热敏纸上潜指纹的显现方面有独特的应用优势。     

Archived or directly swabbed latent fingerprints as a DNA source for STR typing

Former studies [Nature (1997) 387, Electrophoresis 20 (1999) 2870, P. Van Renterghem, D. Leonard, C. De Greef, Progress in Forensic Genetics, Vol. 8, 2000, p. 501, J. Forensic Sci. 45 (3) (2000) 687] have shown that even a single skin contact, documented by a latent fingerprint, can transfer enough DNA for a genetic analysis. It was proven in these studies that it is possible to swab fingerprints from surfaces [Nature (1997) 387, Electrophoresis 20 (1999) 2870, P. Van Renterghem, D. Leonard, C. De Greef, Progress in Forensic Genetics, Vol. 8, 2000, p. 501] and use them as a DNA source. Usually, however, discovered fingerprints are removed with scotch tape and placed on evidence cards for further investigation.In this study, we tried to assess the potential use of latent fingerprints as a DNA source for STR typing. The materials (magnetic powder, soot powder and scotch tape) used for visualization and archiving fingerprints in Germany were tested for their PCR inhibitory characteristics. Then, fingerprints were placed on clean glass surfaces, visualized and tested for their usefulness as a DNA source.Obtained DNA was quantified and tested in an STR system. Partly it proved possible to type fingerprints taken directly from the surface as well as fingerprints removed from the surface with scotch tape.     

Effects of CBRN Decontaminants in Common use by First Responders on the Recovery of Latent Fingerprints—Assessment of the Loss of Ridge Detail on Glass

Following a CBRN incident, first responders use decontamination procedures to reduce the risk of exposure. The effect of decontamination on forensic trace material has, however, not been fully examined. This study sought to evaluate the effect of five different physical or chemical decontamination materials on the recovery of latent fingerprints. Fingerprints were deposited on glass slides, decontaminated, and assessed on the presence of ridge detail. The results demonstrate that decontamination affects the quality of latent fingerprints substantially. On at least 61% of the fingerprints, a reduced amount of ridge detail was observed upon decontamination. Furthermore, development with cyanoacrylate appeared not to succeed anymore. Instead, the ability of vacuum metal deposition to successfully develop decontaminated fingerprints is demonstrated. The results from this study may contribute to an increased forensic awareness regarding decontamination and emphasize the necessity for further research into new item decontamination procedures or new forensic initiatives prior to decontamination.     

Development of latent fingerprints on compact disc and its effect on subsequent data recovery

Chance fingerprints may be found on every type of surfaces of contact and when they are latent, need to be developed by various methods. The type of surface on which latent prints are to be developed is one of the important factors when a choice for a method of development is to be made. The matter becomes more crucial when the surface is unique like a compact disc containing digital data. In this case, to develop the fingerprints is not the only matter to be taken care of but also, is very important to select such a method which may not effect the stored data and its retrieval. In present investigation, various methods have been tried to develop fingerprints on the writing surface of a CD and results are discussed with respect to their development as well as its effect on stored data and data retrieval.     

Establishing an integrated pipeline for automatic and efficient detection of trace DNA encountered in forensic applications

The analysis of trace DNA is a crucial component in forensic applications. Biological materials containing low-level DNA collected at crime scenes, such as fingerprints, can be valuable as evidence. Automatic detection of biological samples has been largely embraced in forensic applications to meet the increasing throughput requirements. However, the amount of DNA automatically retrieved from trace evidence often tends to be small and unstable, ultimately resulting in poor detection of DNA profiles. Thus, in this work, we introduced a robust DNA extraction and purification platform named Bionewtech® BN3200 (Bionewtech®, Shanghai, China) with the goal of constructing a rapid automatic detection system for trace DNA. The establishment of automatic detection system for trace DNA mainly encompassed two parts: assessing the sensitivity of automatic extraction platform and screening the optimal short tandem repeat (STR) typing kit. The sensitivity of Bionewtech® BN3200 platform based on Ultra-sensitive DNA Extraction kit was initially estimated, demonstrating that this extraction platform might contain large potential in the trace DNA extraction. For the amplification part, three sets of commercial multiplex STR typing kits were selected as candidates, and the amplified products were further genotyped on the Applied Biosystems 3500xl Genetic Analyzer. After comparation, SiFa™ 23 Plex Kit was determined as the most suitable amplification system for trace DNA. Eventually, the newly exploited trace DNA detection system was successfully implemented in the detection of fingerprints derived from glass surfaces with the five-seconds contact time. As a result, the DNA recovered from the fingerprints fluctuated approximately from 57.60 pg to 18.05 ng, in addition, over 70% of the total STR loci were detected in 75% of the fingerprint samples.     

Recovery of fingerprints from fire scenes and associated evidence.

A lack of information concerning the potential recovery of fingerprints from fire scenes and related evidence prompted several research projects. Latent prints from good secretors and visible prints (in blood) were placed on a variety of different surfaces and subsequently subjected to "real life" fires in fully furnished compartments used for fire investigation training purposes. The items were placed in various locations and at different heights within the compartments. After some initial success, further tests were undertaken using both latent and dirt/grease marks on different objects within the same types of fire compartments. Subsequent sets of tests involved the recovery of latent and visual fingerprints (in blood, dirt and grease) from different types of weapons, lighters, plastic bags, match boxes, tapers, plastic bottles and petrol bombs that had been subjected to the same fire conditions as previously. Throughout the entire series of projects one of the prime considerations was how the resultant findings could be put into practice by fire scene examiners in an attempt to assist the police in their investigations. This research demonstrates that almost one in five items recovered from fire scenes yielded fingerprint ridge detail following normal development treatments.     

Bayesian framework for the evaluation of fiber evidence in a double murder--a case report

Fiber evidence found on a suspect vehicle was the only useful trace to reconstruct the dynamics of the transportation of two corpses. Optical microscopy, UV-Vis microspectrophotometry and infrared analysis were employed to compare fibers recovered in the trunk of a car to those of the blankets composing the wrapping in which the victims had been hidden. A "pseudo-1:1" taping permitted to reconstruct the spatial distribution of the traces and to further strengthen the support to one of the hypotheses. The Likelihood Ratio (LR) was calculated, in order to quantify the support given by forensic evidence to the explanations proposed. A generalization of the Likelihood Ratio equation to cases analogous to this has been derived. Fibers were the only traces that helped in the corroboration of the crime scenario, being absent any DNA, fingerprints and ballistic evidence.     

Using spectral information in forensic imaging

Improved detection of forensic evidence by combining narrow band photographic images taken at a range of wavelengths is dependent on the substance of interest having a significantly different spectrum from the underlying substrate. While some natural substances such as blood have distinctive spectral features which are readily distinguished from common colorants, this is not true for visualization agents commonly used in forensic science. We now show that it is possible to select reagents with narrow spectral features that lead to increased visibility using digital cameras and computer image enhancement programs even if their coloration is much less intense to the unaided eye than traditional reagents. The concept is illustrated by visualising latent fingermarks on paper with the zinc complex of Ruhemann's Purple, cyanoacrylate-fumed fingerprints with Eu(tta)(3)(phen), and soil prints with 2,6-bis(benzimidazol-2-yl)-4-[4'-(dimethylamino)phenyl]pyridine [BBIDMAPP]. In each case background correction is performed at one or two wavelengths bracketing the narrow absorption or emission band of these compounds. However, compounds with sharp spectral features would also lead to improved detection using more advanced algorithms such as principal component analysis.     

荧光二氧化硅纳米粒子的制备及在手印显现中的应用

目的制备二氧化硅纳米粒子并探索其在手印显现中的应用。方法先制备亲油性二氧化硅纳米粒子,然后加入不同的荧光物质,通过控制变量法筛选出最佳的纳米粉末与荧光粉末的质量比。将制备出的荧光二氧化硅纳米粉末与纳米粉末、荧光粉末进行手印显现效果的比较。结果荧光二氧化硅纳米粒子对多种不同载体表面的潜手印有良好的显现效果。结论荧光二氧化硅纳米粉末与传统粉末相比,在显现有背景干扰客体上的手印有明显优势;与普通荧光粉末相比,荧光二氧化硅纳米粉末具有与手印物质结合效果好,毒性小,不易刷糊,成本低的优势。     

“502”胶液体显现潜手印技术的研究

目的研究探索"502"胶溶液显现手印的方法.方法以石油醚为分散剂,添加对苯二酚作为显现增强剂,配制"502"胶显现液.结果能够显现非渗透客体上油质加、减层手印、加减层混合手印及普通汗潜手印,其显现效果与"502"胶熏显法非常相似.结论该方法具有方便、快捷、灵敏等特点,是"502"胶显现手印技术的重要补充.