A Test of Three Methods for Estimating Stature from Immature Skeletal Remains Using Long Bone Lengths*

Abstract: In this study, the accuracy of three methods for stature estimation of children from long bone lengths was investigated. The sample utilized consists of nine identified immature skeletons (seven males and two females) of known cadaver length, aged between 1 and 14 years old. Results show that stature (cadaver length) is consistently underestimated by all three methods (from a minimum of 2.9 cm to a maximum of 19.3 cm). The femur/stature ratio provided the least accurate estimates of stature, and predictions were not significantly improved by the other two methods. Differences between true and estimated stature were also greatest when using the length of lower limb bones. Given that the study sample children grew in less than optimal environmental conditions, compared with the children that contributed to the development of the methods, they are stunted and have proportionally shorter legs. This suggests that stature estimation methods are not universally applicable and that environmental differences within a population (e.g., socioeconomic status differences) or differing levels of modernization and social and economic development between nations are an important source of variation in stature and body proportions of children. The fallibility of stature estimation methods, when they do not consider such variation, can be somewhat minimized if stature is estimated from the length of upper limb bones.     

A Procedure for Calculating the Vertical Space Height of the Sacrum When Determining Skeletal Height for Use in the Anatomical Method of Adult Stature Estimation

Estimating stature from skeletonized remains is one of the essential parameters in the development of a biological profile. A new procedure for determining skeletal height (SKH) incorporating the vertical space height (VSH) from the anterior margin of the sacral promontory to the superior margins of the acetabulae for use in the anatomical method of stature estimation is introduced. Regression equations for stature estimation were generated from measurements of 38 American males of European ancestry from the William M. Bass Donated Skeletal Collection. The modification to the procedure results in a SKH that is highly correlated with stature (r = 0.925–0.948). Stature estimates have low standard errors of the estimate ranging from 21.79 to 25.95 mm, biases from to 0.50 to 0.94 mm, and accuracy rates from 17.71 mm to 19.45 mm. The procedure for determining the VSH, which replaces “S1 height” in traditional anatomical method models, is a key improvement to the method.     

Sexing and stature estimation criteria for Balkan populations

Abstract:  Two standard measurements, maximum femur length and head diameter, were collected by International Criminal Tribunal (ICTY) anthropologists. Only Kosovans had both femur dimensions for both sexes. Antemortem stature data were available only for Kosovan and Croatian males. Despite these limitations, the data offer the opportunity to examine ethnic variation and to present sex and stature estimation criteria for these groups. Additional data from Croatians and from American Whites were used for comparison in certain parts of the analysis. Femur variation was considerable. Kosovans can be characterized as short and robust, Bosnians as tall and less robust, and Croatians are tall and gracile, resembling American Whites more than the other groups. Some limited antemortem data on stature was also available, allowing stature estimation equations to be estimated for Croatians and Kosovans. Antemortem stature estimates were obtained from interviews with relatives and are shown to overestimate actual stature. We argue that equations predicting height obtained from relatives is the most realistic in this case because that is the height to which an estimate obtained from bone lengths will be compared. Kosovans were also shown to have experienced slight secular increase in femur length over the past 70 years.     

The Effect of Vertebral Numerical Variation on Anatomical Stature Estimates

Abstract: Most humans possess 24 presacral vertebrae composed of seven cervicals, 12 thoracics, and five lumbars. However, variation from this standard pattern exists. The purpose of this study was to test the effect of congenital vertebral numerical variation on anatomical stature estimates and to recommend appropriate procedures when such variation occurs. Our sample consists of 41 individuals with unusual vertebral count patterns and known cadaveric statures from the Smithsonian’s Terry Collection. Raxter et al. published a revised Fully anatomical technique in 2006 and we used this to estimate living stature. Based on our results, we recommend using the standard anatomical technique to reconstruct stature, regardless of vertebral pattern. However, when an individual possesses six sacral segments together with a normal number of presacral vertebrae, we recommend the addition of a slight correction factor of 1.3 cm or 0.8% of estimated stature.     

Estimation of Living Stature from Selected Anthropometric (Soft Tissue) Measurements: Applications for Forensic Anthropology

Abstract:  Estimation of living stature has obvious utility in the identification process. Typically, anthropologists estimate stature from the measurement of long bone length. This type of analysis is traditionally conducted on skeletonized or badly decomposed remains, so collection of the necessary bone measurements is relatively simple. As the role of anthropologists expands into medical examiner offices and mass fatality incidents, the analysis of fleshed bodies and body parts is a more common scenario. For stature estimation in these types of cases (e.g., analysis of body portions recovered from an aircraft crash site or from intentional dismemberment), the presence of soft tissue on the human remains would usually necessitate dissection to expose skeletal elements to derive metric data for stature estimation. In order to circumvent this step, this paper provides various formulae that allow for standard anthropometric (i.e., soft tissue) measurements to be used in place of skeletal measurements. Data were compiled from several anthropometric studies (National Health and Nutrition Examination Survey [NHANES] and U.S. Army Anthropometric Survey [ANSUR]) and numerous regression models are presented. Results are compared between skeletal measurements and the anthropometric measurements from each study. It was found that the ANSUR models are similar to the skeletal models, while the NHANES models exhibit weaker correlation coefficients and higher standard errors. Overall, this study finds that stature estimates derived from anthropometric data provide good results and remove the necessity for dissection when working with fleshed body portions.     

数字X线测量上肢长骨推算身高

目的应用数字X线测量上肢长骨,建立适合当代中国四川汉族人群长骨推算身高的回归方程。方法按纳入标准对365例四川汉族正常人进行身高测量及上肢的数字X线检查,测量上肢各长骨不同标志点之间的长度,用SPSS统计软件对各测量值与身高进行相关回归分析,并对回归方程进行回代检验。结果共建立27个一元回归方程以及3个多元回归方程,各方程都具有统计学意义。上肢长骨中,尺骨相关性大于桡骨,男性相关性大于女性,多元回归方程的准确性高于一元回归方程。结论放射学方法测量长骨推算身高是一项简单、实用的方法,更适合上肢尸块的个人识别,值得进一步研究。     

Reanalysis of the Trotter Tibia Quandary and its Continued Effect on Stature Estimation of Past‐Conflict Service Members

Forensic casework from past‐conflicts relies on the corrected historical Trotter data for stature estimation in Fordisc. For roughly 10 years’, stature estimation using this data has produced point estimates for the tibia that are on average 1.25 inches less than the other long bones. This issue was identified after applying the equations derived from Fordisc to the USS Oklahoma commingled assemblage. Reevaluation of Fordisc revealed that a correction factor of 20 mm, instead of 10 mm, was mistakenly applied to the Trotter tibia data. Historical forensic anthropology reports written at the Defense POW/MIA Accounting Agency were utilized to identify that the overcorrection is isolated to Fordisc 3 with an error rate of 5% of known antemortem statures falling outside of the prediction intervals that relied on the tibia. Further evaluation of the Oklahoma sample indicates the 10 mm correction is still producing point estimates less than the other long bones.     

Stature reconstruction using fragmentary femora in South Africans of European descent

It is well documented that the intact femur has the highest correlation with stature and as such has been widely used in the derivation of regression equations for stature estimation. As intact femur is not always present for analyses in forensic cases, it has become necessary to derive regression equations for the estimation of stature from fragments of this bone. Few studies have presented regression equations for stature estimation from fragments of the femur. Because these equations are population specific, it was the aim of this study to derive similar equations for estimation of stature and maximum length of femur from measurements of the femur of South Africans of European descent. A sample of 50 male and 50 female complete skeletons were obtained from the Raymond A. Dart Collection of Human Skeletons. Total skeletal height for each of the skeletons was calculated using the Fully's method. Six variables were measured on each femur which included the vertical neck diameter, upper breadth of femur, epicondylar breadth, bicondylar breadth, lateral condyle length, and medial condyle length. Regression equations for the estimation of stature are presented. The range of standard error of estimate for these equations (3.71-5.31) was slightly higher than those obtained for intact long bones (2.13-3.79). It is therefore suggested that in the absence of intact femur, regression equations derived from the present study can provide a reliable estimate of adult stature.     

Accuracy and Reliability of Total Body Mass Estimation Techniques from Stature and Bi‐iliac Breadth in Non‐Hispanic U.S. Whites from the Bass Donated Skeletal Collection

This paper tests the fidelity of a recent method that used the NHANES III dataset as a proxy to estimate total body mass from stature and bi‐iliac breadth in U.S. White males and females. The bi‐iliac breadths of 230 males and 152 females identified as non‐Hispanic U.S. White from the Bass Donated Skeletal Collection were measured, and along with stature from predonor paperwork, total body mass estimates were calculated and then compared to body masses recorded on predonor paperwork. Male and female samples were subdivided by body mass index (BMI [kg/m²]) categories established by the World Health Organization. Our results suggest that total body mass estimates can be accurately assessed provided that the individual is within 18.50 ≤ BMI ≤ 29.99 for White males and 18.50 ≤ BMI ≤ 24.99 for White females. Recommendations on how to report total body mass estimates are also presented.     

Stature Estimation from Postmortem CT Femoral Maximum Length in Contemporary Danish Population

Stature estimation methods for Danish adult population have generally relied on Trotter and Gleser’s and Boldsen’s regression equations that are based on the skeletal remains of recent war dead American Whites, Terry Skeletal Collection, and Danish archaeological medieval skeletal materials, respectively. These equations are probably not suitable for stature estimation in contemporary Danish forensic cases. Furthermore, because postmortem computed tomography (PMCT) is now routinely performed at Danish forensic departments, equations based on PMCT, rather than measurements of defleshed bones, are needed. The aim of this study was to develop new equations for adult stature estimation based on PMCT femoral measurement. Maximum femoral length was measured on the PMCT images of 78 individuals (41 males and 37 females) aged 23–45 years. The measurement accuracy was tested on dry bones, and all the measurements were included in the inter- and intra-observer analyses. Both analyses results demonstrated the reliability of the method and data. Comparison between the living stature of the individuals and the estimates based on the equations by Trotter and Gleser and Boldsen demonstrated the unreliability of the previous equations to some extent. New regression equations were then developed and validated on a different sample of 18 Danish forensic cases. Comparisons of all the equations indicated that both the sets of previous equations underestimated the stature in the new validation dataset. The new equations developed in this study provide a reliable alternative for stature estimation in modern Danish forensic cases.     

Demographic change and forensic identification: problems in metric identification of Hispanic skeletons

The United States (U.S.) population structure is currently in a state of flux with one of the most profound changes being the increasing number of people referred to as Hispanic. In the U.S., much of the identification criteria for a biological profile are based on American Black and White individuals from anatomical collections. Using metric data from the Forensic Anthropology Data Bank (FDB), this paper will attempt to explore several issues that forensic anthropologists face when confronted with Hispanic remains. These will involve estimation of sex, height, and ancestry, the initial components of a biological profile. Discriminant function analyses indicate that American White criteria provide poor estimations of sex when applied to Hispanics and that ancestry estimation of Hispanic crania is difficult. Additionally, a new linear regression equation is presented that estimates stature for Hispanic individuals, although population specific criteria are still needed for Hispanic individuals from diverse geographical origins.     

Estimation of stature from hand impression: a nonconventional approach

Stature is used for constructing a biological profile that assists with the identification of an individual. So far, little attention has been paid to the fact that stature can be estimated from hand impressions left at scene of crime. The present study based on practical observations adopted a new methodology of measuring hand length from the depressed area between hypothenar and thenar region on the proximal surface of the palm. Stature and bilateral hand impressions were obtained from 503 men of central India. Seventeen dimensions of hand were measured on the impression. Linear regression equations derived showed hand length followed by palm length are best estimates of stature. Testing the practical utility of the suggested method on latent prints of 137 subjects, a statistically insignificant result was obtained when known and estimated stature derived from latent prints was compared. The suggested approach points to a strong possibility of its usage in crime scene investigation, albeit the fact that validation studies in real-life scenarios are performed.     

Total Body Mass Estimation from Anthropometric Measurements in Modern Young Adult U.S. Populations with Healthy Body Fat Percentages (NHANES III)

This study presents a method by which to estimate total body mass in modern young adult U.S. populations who self‐identified as non‐Hispanic U.S. White, non‐Hispanic U.S. Black, and Mexican American with anthropometric measurements from the Third National Health and Nutrition Examination Survey (NHANES III) 1988–1994 dataset (N = 2532). Correlations of stature and bi‐iliac breadth with total body mass were stronger among males (r = 0.717–0.774) than among females (r = 0.549–0.661), yet these results were more accurate assessments of total body mass than existing techniques. This study also examined additional anthropometric measurements to estimate total body mass using an information‐theoretic approach demonstrating that some error in the stature–bi‐iliac breadth method is attributed to a nonsupported model with multimodel inference. The limitations of the current total body mass technique are discussed as well as the need for future studies to validate the method.     

Stature Estimation from Foot Length Using Universal Regression Formula in a North Indian Population

Abstract:  Stature is a significant parameter in establishing identity of an unknown. Conventionally, researchers derive regression formula separately for males and females. Sex, however, may not always be determined accurately, particularly in dismembered remains and thus the need for a universal regression formula for stature estimation irrespective of sex of an individual. The study was carried out in an endogamous group of North India to compare the accuracy of sex-specific regression models for stature estimation from foot length with the models derived when the sex was presumed as unknown. The study reveals that regression equation derived for the latter can estimate stature with reasonable accuracy. Thus, stature can be estimated accurately from foot length by regression analysis even when sex remains unknown.     

Tibia and Fibula Stature Formulae for Modern Female Populations Based on Digital Radiographic Measurements

Abstract: This study demonstrates the feasibility of creating bone lengths and stature databases of significant size for modern living human populations from digital radiographic archives and medical records. Tibia and fibula lengths were taken from digital radiographic images of 250 women. The images, drawn from the University of California, Los Angeles Medical Center’s Radiology Department’s General Electric Picture Archiving and Communication System, were taken between 2003 and 2007. Stature measurements were obtained from medical records on 83 individuals, 50 of which were used to regress stature equations for the tibia and fibula. Bone lengths obtained from radiographic images are almost 3 cm longer than those obtained from skeletalized collections. The formulae produce ranges up to 10 cm lower than current formulae. Accuracy could be improved as methods are developed to correct for the small magnification produced by digital images.     

Evaluation of Stature Estimation from the Database for Forensic Anthropology*†

Abstract: Trotter and Gleser’s ( 1 - 3 ) stature equations, conventionally used to estimate stature, are not appropriate to use in the modern forensic context. In this study, stature is assessed with a modern (birth years after 1944) American sample (N = 242) derived from the National Institute of Justice Database for Forensic Anthropology in the United States and the Forensic Anthropology Databank. New stature formulae have been calculated using forensic stature (FSTAT) and a combined dataset of forensic, cadaver, and measured statures referred to as Any Stature (ASTAT). The new FSTAT‐based equations had an improved accuracy in Blacks with little improvement over Ousley’s ( 4 ) equations for Whites. ASTAT‐based equations performed equal to those of FSTAT equations and may be more appropriate, because they reflect both the variation in reported statures and in cadaver statures. It is essential to use not only equations based on forensic statures, but also equations based on modern samples.     

Formulae for Estimating Skeletal Height in Modern South‐East Asians

Estimating stature in human skeletal remains of Asian ancestry is problematic for forensic anthropologists due to the paucity and uncertain suitability of regression formulae. To address this issue, our study analyzed 64 individuals from a modern skeletal collection of South‐East Asian origin and developed population‐specific ordinary least squares regression formulae to estimate skeletal height from each of the long bones of the upper and lower limbs, as well as from trunk length. Results indicate that the most accurate estimates of skeletal height from a single bone (as measured by standard error of the estimate—SEE) are from tibial length in males (SEE = 2.40 cm) and from humeral length in females (SEE = 2.59 cm), followed by femoral length (SEE = 2.84 cm). When multiple elements are considered, the combination of femoral and tibial length yields the best estimates in both sexes as well as combined sex samples (male SEE = 2.40 cm; female SEE = 2.77 cm; combined sex SEE = 2.54 cm).     

Stature Estimation from Hand Dimensions in a Han Population of Southern China*

Abstract: To analyze the relationship between stature and hand dimensions for forensic applications, the stature and hand dimensions of 400 healthy adults aged between 20 and 25 years were measured in a Han population of Southern China. The mean values of the stature are 170.49 and 159.72 cm in the men and the women, respectively. The statistically significant differences between the right‐ and the left‐hand dimensions were not observed in the men, whereas the bilateral differences are statistically significant in female hand dimensions. The correlation coefficients were found to be statistically significant for the hand dimensions in both the sexes. The hand length showed higher correlation coefficients than the hand breadth in both sexes. Linear and multiple regressions were developed in this study; multiple regressions showed higher correlation coefficients than linear regressions. Two regression models could be used to estimate the stature from the hand dimensions in this population.     

Stature Estimation from Foramen Magnum Region in Chinese Population

Estimation of stature from body parts plays a vital role in identifying the dead. This study focused on dimensions of the foramen magnum region and examined the relationship between stature and the dimensions of the foramen magnum region in northern and southern Chinese populations. Measurements were taken on the skulls of 276 individuals (all male). Data on 48 individuals from northern China and 140 from southern China were used for further stature reconstruction of the above two populations in China. Statistical analyses indicate that bilateral variation is insignificant for all measurements except maximum length of condyle in the southern Chinese population (p < 0.01) and that the northern and southern populations differ significantly only in the minimum distance between condyles. Linear and multiple regression equations for stature estimation were established. The correlation coefficients between stature and the various measurements differed between the northern and southern Chinese populations.     

Stature estimation based on dimensions of the bony pelvis and proximal femur

Pelin et al. recently showed that sacral height measured on lateral magnetic resonance images can be used with moderate accuracy to reconstruct stature in males. In most forensic anthropological cases, however, sacral dimensions must be obtained from dry bones. In this study, the relationship between stature and sacral height, hip height, and femur head diameter measured on dry bone was evaluated for American Blacks and Whites of both sexes (n = 247). There are significant correlation between stature and these three dimensions, but the results suggest that none of the dimensions predict stature with the accuracy needed to be useful in forensic anthropological investigations.