CdSe/TGA与CdS/PAMAM量子点溶液显现胶带粘面油汗手印性能比较研究

目的比较巯基乙酸包覆的硒化镉（CdSe/TGA）和硫化镉/聚酰胺-胺（CdS/PAMAM）量子点溶液显现胶带粘面手印的性能。方法两种材料在显现指纹的过程中,通过比较观察显现时间、显现温度、遗留时间等因素来考察显现效果。结果 CdSe/TGA溶液的荧光强度、显现时间以及材料的稳定性较好;CdS/PAMAM溶液显现的手印纹线流畅,显现细节特征能力强,对陈旧的或微弱的油潜手印的显现效果好。结论两种材料各有所长,对胶带粘面手印有良好的显现效果。     

荧光黄湿粉显现手印方法的初步研究

目的研发一种具有荧光特性的黄湿粉,以提取遗留在不同客体上的不同种类的手印。方法在100mL温水中加入适量的表面活性剂,溶解后加入100g荧光黄颜料,选用不同种类客体及不同种类物质手印进行显现实验,比较显现效果;结果遗留在光滑非渗透性客体及半渗透性客体表面的汗潜、油潜手印,显出的手印纹线流畅、反差强、荧光强;结论荧光黄湿粉可适用于光滑非渗透性客体及半渗透性客体表面新鲜或较新鲜汗潜手印、油潜手印及血潜手印的显现。     

茚三酮固体介质法显现不同纸张表面潜指纹

茚三酮是显现渗透性客体上潜在汗液手印的最常用方法之一,采用微量物证提取纸和茚三酮溶液有机结合制作的茚三酮固体介质可以有效避免客体表面背景着色,不容易引起纸张油墨扩散,另外避免使用的溶剂易燃。能够更便捷的显现现场指纹,并且能够突破茚三酮只能显现渗透性客体的局限,拓宽茚三酮显现客体的范围,在热敏纸上潜指纹的显现方面有独特的应用优势。     

双亲性二氧化硅纳米悬浮液显现手印初探

目的 考查制备的双亲性二氧化硅纳米粒子在配制成悬浮液后对非渗透性客体上手印显现的能力。方法 通过调整溶剂类型、二氧化硅纳米粒子浓度、表面活性剂种类、溶液pH值等因素,探索二氧化硅纳米粒子悬浮液显现手印的最佳方法,并应用于手印显现和效果比较。结果 利用优化后的悬浮液浸显一些非渗透性客体表面的汗潜手印,显出的手印纹线流畅、细腻,细节特征清晰,反差明显,与传统的显现方法比较,此法具有明显优势。结论 研究表明,纳米二氧化硅悬浮液是显现手印的一种有效、简便和经济的方法,具有很好的应用前景。     

纳米二氧化钛荧光粉末显现潜在手印研究

目的使用荧光染料包覆纳米二氧化钛颗粒,制备具有荧光效果的纳米二氧化钛粉末材料,并探索应用纳米二氧化钛荧光粉末显现潜在手印的方法。方法使用实验室合成的二酰亚胺染料与纳米二氧化钛微粒按照一定质量比混合制备形成荧光粉末,通过扫描电子显微镜对其进行表征,观察颗粒结构特征。在玻璃、瓷砖、透明塑料片、彩色塑料包装、易拉罐5类非渗透性客体上捺印手印,观察纳米二氧化钛荧光粉末对不同非渗透性客体上新鲜潜手印的显现效果。分别在5种客体上制作遗留时间为1、4、7、15d的手印样本,考察遗留时间对纳米二氧化钛荧光粉末显现自然陈旧手印效果的影响。将新鲜手印置于标准大气压100℃条件下分别加热1~72h,使用纳米二氧化钛荧光粉末显现,考察其对高温老化手印的显现效果。结果纳米二氧化钛荧光粉末为粒径100~200nm的圆形颗粒;在蓝绿光激发下可发出较强的荧光,能显现多种非渗透性客体上的新鲜手印,与背景反差明显并且能显著降低复杂背景对手印纹线的影响;显出新鲜手印中80%以上具有鉴定条件。纳米二氧化钛荧光粉末对遗留15d以内的陈旧手印仍具有较好的显现效果。100℃高温环境对手印显现效果没有明显影响。结论纳米二氧化钛荧光粉末经济、环保,显现操作简单,易于推广。     

基于PolyCyano UV粉末显现手印的新技术

目的介绍1种新型PolyCyano UV粉末显现非渗透性光滑客体表面潜手印的新技术。方法选取多种常见客体,由志愿者在客体上捺印指印,将PolyCyano UV粉末加热至230℃使其升华,待该粉末在手印纹线上聚合后使用长波紫外线照射若干时间,然后在蓝光激发下使用滤色镜观察并拍照。结果绝大部分非渗透性光滑客体表面上的潜手印均有很好的显现效果,尤其是对浅色或白色客体有十分明显的荧光效果,对陈旧手印也有较好的显现效果。结论该方法熏显操作简便、显现时间短、无需二次染色增强、不破坏生物检材、显现效果明显,适合推广使用。     

浅色调湿粉显现手印方法的研究

目的探索新的手印显现方法,祛除传统手印显现方法对使用者的健康危害;方法用浅色调湿粉采用不同操作对不同客体表面手印、不同物质手印及不同遗留时间手印进行显现,通过显现效果的比较,得出湿粉显现手印的适用范围、最佳操作方法及其显现效果;结果显出的手印清晰、流畅,与背景反差强;结论该方法适用于光滑非渗透性客体表面及潮湿或粘性表面的汗潜、油潜、蛋白手印的显现,使用方便有效。     

“502”加膜一染色法显现油质手印

目的探索方便快捷并有效的油质手印显现方法。方法用“502”熏显常见玻璃、粗糙皮革等不同客体上不同遗留时间的油汗手印和多油手印,加染后用透明胶带粘取。结果显现了30天左右大多数非渗透性客体上的油质加层手印,10天左右渗透性客体上的油质渐层手印。结论本方法适用于油质加层手印及部分油质渐层手印的显现,显出手印清晰,流畅,不破坏手印。     

二氧化钛显现手印研究

目的建立应用二氧化钛的小微粒悬浮液来显现潜在手印的方法。方法选择6种不同客体,分别取普通汗和皮脂汗手印各40枚,各保存1天和7天,用二氧化钛小微粒悬浮液进行手印显现。结果保存1天和7天的汗潜手印显现结果没有很大区别,但皮脂汗手印显现效果好于普通汗手印。结论二氧化钛的小微粒悬浮液可以有效地显现出光滑非渗透性客体表面的潜手印。     

TiO2纳米粉末显现潜在指纹研究

目的建立并比较了TiO2纳米粉末与常规粉末的显现效果。方法使用配粉、色素、疏水性物质对TiO2纳米粉末进行改性，并通过正交实验设计法对综合改性条件进行优化。结果与普通粉末相比，TiO2纳米粉末由于粒度上的优势，具有显现细节特征多、背景表面无粘粉、显现陈旧指纹能力强等优点；通过添加配粉、色素、疏水性物质等改性剂，可以增加TiO2纳米粉末的流散性、扩大粉末与客体背景的反差并提高了其显现潮湿客体的能力。最佳改性方案为使用20％的色素、5：2的配粉比例以及十六胺做疏水性物质。结论TiO2纳米粉末能更有效显现非渗透性客体表面上的潜指纹。     

Magnetic Fingerprint Powder from a Mineral Indigenous to Thailand

Abstract: A study was conducted to investigate whether natural magnetite (Fe₃O₄), which is an abundant mineral in Thailand, could be used as a magnetic powder in the detection of latent fingerprints. Because of the presence of impurities, powdered magnetite is only weakly attracted by a magnet and cannot be used as a magnetic fingerprint powder by itself. Mixing a small amount of magnetite powder with nickel powder greatly enhances the magnetic attraction. A mixture of magnetite powder and nickel powder in a mass ratio of approximately 1:100 was found to be suitable for use as a magnetic fingerprint powder. Fingerprints developed using the magnetite/nickel mixture on nonporous surfaces were found to exhibit good adherence and clarity. Using an automated fingerprint identification system, the number of minutiae detected in fingerprints developed by using the prepared powder on nonporous surfaces was found to be comparable to those detected in fingerprints developed by using a commercial black magnetic powder. The cost is lowered by more than 60%.     

尼罗红显现潮湿纸张上油脂手印方法初探

目的探索显现潮湿纸张表面油脂手印的显现方法。方法取250枚纸张载体的油脂指印,分为AB-CDE 5组,分别用自来水浸泡不同时间后,用尼罗红工作液显现,并在465nm多波段光源下进行观察。结果 5组的显现率从56%～94%,表明显出率比较高。结论该方法简单实用,可用于案件检验。     

胺端基型CdS／PAMAM潜在显现指印的应用

目的探索一种新型纳米荧光材料的制备方法及其在潜在指印显现方面的应用前景。方法以聚酰胺-胺（PAMAM）树形分子为模板，原位合成CdS纳米簇。并使用荧光光谱法对产物进行表征：应用这种新型荧光材料对多种客体表面、不同陈旧程度的潜在指印进行显现．并将显现结果与传统荧光染料进行比对。结果该荧光材料在365nm紫外光激发下可以发出很强的可见荧光：与传统的荧光染料相比。-NH2端基型CdS／PA—MAM可以同指印残留物进行靶向结合．其荧光强度高、背景干扰小，指印纹线与客体反差大。结论-NH2端基型CdS／PAMAM可以有效地显出非渗透性客体表面的潜在指EP。     

新型亲油性纳米二氧化硅粉末在手印显现中的应用

目的 比较新型亲油性纳米二氧化硅粉末显现手印的效果.方法 应用亲油性纳米二氧化硅粉末与现场勘查箱内金粉、银粉和黑色磁性粉显现非渗透性客体表面油汗混合手印,并在自然光下观察比较显现效果.结果 亲油性纳米二氧化硅粉末显现出的手印图像纹线清晰连贯,背景反差好.结论 亲油性纳米二氧化硅粉末显现手印具有一定的优势.     

A Modified Electrostatic Adsorption Apparatus for Latent Fingerprint Development on Unfired Cartridge Cases

Visualization of latent fingerprints on metallic surfaces by the method of applying electrostatic charging and adsorption is considered as a promising chemical‐free method, which has the merit of nondestruction, and is considered to be effective for some difficult situations such as aged fingerprint deposits or those exposed to environmental extremes. In fact, a portable electrostatic generator can be easily accessible in a local forensic technology laboratory, which is already widely used in the visualization of footwear impressions. In this study, a modified version of this electrostatic apparatus is proposed for latent fingerprint development and has shown great potential in visualizing fingerprints on metallic surfaces such as cartridge cases. Results indicate that this experimental arrangement can successfully develop aged latent fingerprints on metal surfaces, and we demonstrate its effectiveness compared with existing conventional fingerprint recovery methods.     

Thermal degradation analysis of amino acids in fingerprint residue by pyrolysis GC-MS to develop new latent fingerprint developing reagents

Conventional development of latent fingerprints is compromised when the prints are decomposed by extreme temperatures, such as those encountered when a weapon cartridge is fired, an improvised explosive device is detonated, and/or in arson cases. Understanding how these extreme temperatures alter the chemical and physical properties of latent fingerprint residue could aid in the discovery of a reagent that could effectively develop these decomposed fingerprints. To mimic scenarios where fingerprints may be exposed to high heat conditions, standards of the five most abundant amino acids in fingerprint residue as well as extracted fingerprint residue were pyrolized under controlled conditions. Compounds identified as pyrolytic decomposition products were 3,6-dimethylpiperazine-2,5-dione (from alanine), maleimide, and 2,5-furandione (from aspartic acid). The pyrograms and selected ion traces show these products to hold promise as indicators of decomposed fingerprint residues and, therefore, may serve as good candidate substrates for a developing reagent.     

The Use of Liquid Latex to Recover Latent Fingerprints that are Covered in Debris from Exterior Glass Surfaces of Vehicles

The purpose of this research is to determine if latent fingerprints deposited on the exterior glass surfaces of vehicles, then covered in debris, can be recovered. Past research used liquid latex to lift soot to recover trace evidence. Recently, liquid latex has been used to recover latent fingerprints along the bottom of vehicles. In this study, a total of 216 latent fingerprints were deposited on the exterior windows of three vehicles. Three control and three experimental latent fingerprints were placed on each side window. The vehicles collected debris for either 2, 3, or 4 weeks. After debris collection, liquid latex was applied to the experimental sections. The underlying fingerprints were developed with white granular powder. Control fingerprints were developed directly with white granular powder. A chi-square test revealed a significant difference in fingerprint recovery between the control and liquid latex method (X² = 9.026, d.f. = 1, p = 0.003). An odds ratio determined that the control method increases the probability of latent fingerprint recovery by 2.68. Fisher's exact test indicated that there is no statistically significant difference between the detail of the recovered control and experimental fingerprints (p = 0.065). This study demonstrates that recovery of fingerprints is possible using the liquid latex method; however, the control method recovers more fingerprints on the glass exterior of vehicles. If latent fingerprints are thought to be present on the exterior glass surfaces of vehicles, the control method should be used to improve vehicle processing by investigators.     

Comparative study of electrochromic enhancement of latent fingerprints with existing development techniques

To address the challenge of capturing latent fingerprint evidence from metal surfaces, a new method of latent fingerprint enhancement based on electrochromic polymer films has recently been developed. Here, we present a study comparing the development and visualization of nonvisible fingerprints on stainless steel substrates using this electrochromic enhancement approach with three classical methods (dusting, wet powder, and cyanoacrylate fuming). Two variants of the electrochromic enhancement method were utilized with polyaniline and poly(3,4-ethylenedioxythiophene) as the electrochromic materials. Fingerprint samples were taken from different donors (varying in age and gender) and were exposed to different environments for systematically varied periods of time (up to 28 days). The environments represent plausible evidential scenarios: left under ambient conditions, washed with aqueous soap solution, washed with acetone, submerged in water, and maintained at elevated temperature. The electrochromic enhancement procedure frequently outperformed the traditional methods, particularly for samples exposed to more challenging histories.