Gunshot reconstructions based on individually parametrical 3-dimensional victim models]

In cases of lethal firearm injuries computer enhanced anatomical feasibility studies can provide unambiguous clues concerning self-versus extraneous infliction. To this end individualized digital 3-dimensional geometrical models of the victim and the weapon are generated true to scale with the help of the CAD software (POSER Version 4, egi.sys AG). All anatomical data relevant to the motion apparatus and the range of movement as well as the injuries of the individual victim are carefully documented and serve as input parameters for the digital geometrical model. The bullet path is visualized as a cylinder between entrance and exit wound. A series of simulation sequences then can be carried out by the variation of anatomically possible shot positions and the virtual grasp of the weapon. An exact alignment of the firearm's barrel and the bullet path is a reliable statement for the feasibility of self-infliction. In addition to circumstantial evidence the digital reconstruction of the firearm shot admits of unambiguous conclusions about the course of the traumatic event.     

Homicide victim/offender relationship in Florida Medical Examiner District 8

This study examined the correlations between victim/offender relationship and three variables: motive, weapon choice, and number of injuries inflicted. Empirical relationship and motive categories were used. The sample consisted of 57 intentional homicide cases from Florida Medical Examiner District 8 between the years 1992 and 1996. Relationships were divided into primary and secondary categories. Primary relationships included intimates, relatives, and friends; secondary relationships included acquaintances and strangers. Motives were classified as romantic dispute, argument/conflict, revenge, or felony type; weapons as firearm or contact; and number of injuries inflicted as single or multiple. A significant correlation was found between victim/offender relationship and homicide motive; however, the revenge and felony type motive categories did not differ. Unexpectedly, no correlation was found between victim/offender relationship and either weapon choice or number of injuries inflicted. Further study is needed of the interactions between homicide victim/offender relationship and motive, weapon selection, and number of injuries inflicted.     

Anatomical location of bitemarks and associated findings in 101 cases from the United States

The purpose of this paper is to update and confirm previous studies that examined the anatomical location of human bitemarks. This information is useful to forensic odontologists and pathologists, physicians, and coroners who must be familiar with the most likely locations of bitemarks. The data are also useful for those involved in bitemark research. Using the legal database "Lexis," 101 bitemark cases were identified from the United States Courts of Appeal. Cases were included in the study if they provided details concerning the bitemark, such as anatomical location, number of injuries, and information concerning the victim. Information on 148 bites was collated. These data are presented in tabular and graphical form to allow comparisons between males and females, victims and perpetrators, adults and children, and the crime types associated with human bites.     

Reconstruction of a real car-pedestrian-accident. Part I: Generating an individual digital topographic image of the victim

The aim of forensic biomechanics is the reconstruction of traumatic events based on the pathological findings in the victim's morphology, the accident traces and the car damages. The use of forensic documentation tools (e.g. Streifenlichttopometrie) enables 3-dimensional and proportional accurate documentation of the victim's body, of its injuries and of the car damages with submillimeter precision. The generated topographic image serves as input for a multi-body system model of the victim. It allows further to determine exactly the contact points between car and victim for a computer simulated dynamical reconstruction of the impact situation. In the case of an accident involving a car and a pedestrian the generation and application of computer aided 3-dimensional reconstruction models are shown.     

The Cane Sword

This report provides an overview of the injuries caused by a unique blade‐type weapon known as a cane sword. The cane sword usually consists of a blade that is stored in a cylindrical “cane” that can be released at the handle to reveal the hidden blade within. The victim of the case was found to have a stab wound in the left mid‐back that caused perforation of both the lower and upper lobes of the left lung, resulting in a left hemothorax. Upon autopsy, it was concluded that the patient died from injuries caused by the stab wound to the back. Given the shape of the wound and the fact that the weapon itself was found at the site of the homicide, the weapon that caused the injury was believed to be a cane sword. This case will inform forensic pathologists, law‐enforcement officers, emergency medical personnel, and physicians about rare weapon, the cane sword.     

Homicide by sharp force in two Scandinavian capitals

In the Oslo and Copenhagen capital areas, 141 homicides by sharp force were committed in the ten-year period 1985-1994. This method accounted for 33% of the homicides in this period. Thirty-five percent of the victims were female, and most of the victims were between 20 and 50 years of age. The majority of the male victims were killed by an acquaintance, the females by their spouse. Sixty-five percent of the male and 37% of the female victims had alcohol in their blood. The majority of the female victims had lesions in 3-4 anatomical regions, while the males most often had lesions in only one anatomical region. Seventy-nine percent of the females and 36% of the males had self-defence injuries in the upper extremities. In 21 cases (15%) the offender was a woman, 19 of their victims being male; the weapon in these cases was most often a kitchen knife. Seventy-eight percent of the females and 49% of the males were killed in their own home. The most common circumstance was family row when the victim was female, while a fight was the most common circumstance when the victim was male. Three offenders committed suicide after having committed homicide(s) (seven victims; three offenders).     

Left Diaphragm Laceration Due to Cardiopulmonary Resuscitation

External cardiac massage is the essential life‐saving gesture for the management of any cardiac arrest. Since the 1960s, many recommendations have been published to improve the effectiveness of chest compressions alongside the development of automated systems intended to maximize the chances of survival. The use of these manual and/or instrumental techniques can cause secondary injuries, of which rib fractures are the most commonly observed by forensic pathologists. However, a comprehensive review of the literature seldom highlights reports of injuries to the abdomen, even less so to the diaphragm. In this observation, an iatrogenic left diaphragmatic laceration for the first time is described, as a result of manual and instrumental cardiopulmonary resuscitation, in a victim from an intrathoracic wound caused by a bladed weapon.     

'Morphological imprint': determination of the injury-causing weapon from the wound morphology using forensic 3D/CAD-supported photogrammetry

Forensic three-dimensional/computer aided design (CAD)-supported photogrammetry (FPHG) plays an important role in the field of the documentation of forensic relevant injuries; particularly so when a detailed, 3D reconstruction is necessary. This is demonstrated in the case of a patterned blunt injury to the face of a victim, which injury was subsequently proven by FPHG to have been caused by a blow from the muzzle of a soft air gun.The objects to be evaluated had to be series photographed in order to be evaluated virtually on the computer. These photo series were then analyzed with the RolleiMetric system. This system measures and calculates the spatial location of distinctive points on the objects' surfaces, and creates 3D data models of the objects. In a 3D/CAD program, the "virtual 3D model of the injury" is then compared against the "virtual 3D model of the possible injury-causing instrument".The validation of FPHG, as shown by the 3D match between certain characteristics of the muzzle form and the facial injury, demonstrates how this 3D method can be used for patterned wound documentation and analysis.     

Reverse engineering--rapid prototyping of the skull in forensic trauma analysis

Rapid prototyping (RP) comprises a variety of automated manufacturing techniques such as selective laser sintering (SLS), stereolithography, and three-dimensional printing (3DP), which use virtual 3D data sets to fabricate solid forms in a layer-by-layer technique. Despite a growing demand for (virtual) reconstruction models in daily forensic casework, maceration of the skull is frequently assigned to ensure haptic evidence presentation in the courtroom. Owing to the progress in the field of forensic radiology, 3D data sets of relevant cases are usually available to the forensic expert. Here, we present a first application of RP in forensic medicine using computed tomography scans for the fabrication of an SLS skull model in a case of fatal hammer impacts to the head. The report is intended to show that this method fully respects the dignity of the deceased and is consistent with medical ethics but nevertheless provides an excellent 3D impression of anatomical structures and injuries.     

Homicide attempt with a Japanese samurai sword

The use of Japanese swords for homicidal attempts is rare. A Japanese samurai sword is a sharp and cutting object. When faced with the use of this weapon, one must distinguish between stabs and incised wounds. Incised wounds can rarely lead to death, but because of the size of the weapon, stabs usually cause much more serious injuries. Stabs also imply a penetrating movement, whereas incised wounds can be the consequence of protective circular blows. Therefore, it is important to distinguish clinically between these two kinds of wounds. We report a case where the perpetrator argued he had given a circular blow, unfortunately hitting the victim. The pieces of evidence are discussed.     

Multivariate analysis ('forensiometrics')--a new tool in forensic medicine. Findings on the victim of sharp-force homicide can predict the inter-relationship with the perpetrator.

A multivariate 'forensiometric' technique (PLS-DA) was used to create a model to predict the relationship between homicide victim and perpetrator on a five-level scale: strangers, acquaintances, drinking companions, relatives and spouses. The model is based on findings on the victim and at the venue, and uses the following ten variables as 'predictors', listed in falling order of covariation with instances of close relationship between victim and perpetrator: Victim found in home, female victim, a single sharp injury, injuries to the upper extremity, superficial sharp injuries to the chest ('scratches'), ten or more sharp injuries, presence of defence injuries, total number of sharp injuries, male victim, and victim found outdoors. The model was based on 87 sharp-force homicides (the model-set) and was validated on another set of 43 sharp-force homicides (the test-set). In this test-set validation, 17 of 39 cases (44%) were correctly predicted according to the results of earlier combined forensic and police investigations, and a prediction one step away from the correct level was given in another 17 cases. These results were significantly better than would have been obtained by chance.     

Intracranial stab injuries: case report and case study

Non-missile penetrating brain injuries are rare events in western countries. We report a case with lethal stab injury of the brain and identification of the weapon used in the assault by digital superimposition on CT scans taken at admission of the victim to a hospital. Furthermore, all cases with knife stab wounds of the skull between 1971 and 2000 were analyzed and compared with literature reports. Results of this study show that there is no region preference despite of differences in bone thickness, that stab wounds of the brain are almost invariably associated with multiple stab wounds to the trunk and that the wound tract may correspond to the dimensions of the blade allowing the identification of the weapon by digital image analysis.     

Suicide with two guns represents a special type of combined suicide

Suicide by simultaneous gunshots with two firearms is rare. The case of a 90-year-old man who killed himself with two 6.35 mm pistols fired at the temples at the same time is presented. The victim was found dead on the terrace of his home; two guns and two cartridges were present near the corpse. Cases of suicides with two guns published in the literature are compared, and the Italian cases are illustrated briefly. The authors describe the circumstances and autopsy findings that permitted the assertion that it was a case of suicide and to exclude an homicide and show, by figures, the three-dimensional reconstruction of cranial shooting injuries. The use of two guns is considered a representation of a special type of "combined suicide" or "planned complex suicide."     

Body models in forensic ballistics: reconstruction of a gunshot injury to the chest by bullet fragmentation after shooting through a finger.

Forensic science uses substitutes to reconstruct injury patterns in order to answer questions regarding the dynamic formation of unusual injuries.Using a case study, an experimental simulation of a finger was designed, for the first time with a combination of hard wood and glycerin soap. With this model as an intermediate target simulation, it was possible not only to demonstrate the "bullet-body (finger) interaction", but also to recreate the wound pattern found in the victim.This case demonstrates that by using ballistic models and body-part substitutes, gunshot cases can be reproduced simply and economically, without coming into conflict with ethical guidelines.     

Suicide with multiple graze shots

A 77-year-old man was found in his flat with a shot to the right temple. In spite of hospital treatment he died from the head injury the next day. The weapon at the scene used for committing the suicide was a pistol, make Kaba Special (calibre 6.35 mm). At autopsy, the right temporal region showed a surgically treated, originally stellate gunshot entrance wound with a powder cavity. Close to this penetrating gunshot wound there were 3 parallel graze shot injuries of the scalp. The autopsy findings were consistent with the assumption that all the shots had been fired by the victim himself with suicidal intent. The injury pattern is presented and discussed in relation to the results of the technical investigation of the weapon and the findings at the scene.     

Scanning electron microscopy analysis of experimental bone hacking trauma

The authors report on their macro- and microscopy study of bone lesions made by a sharp force instrument (a single blade knife), and a sharp-blunt instrument classified as a chopping weapon (a hatchet). The aim of this work was to attempt to identify the instrument by analyzing the general class characteristics of the cuts. Each weapon was used on human bones. The results indicate that macroscopic analysis is more problematic. The microscopic analysis assessed that characteristics examined were effective in distinguishing sharp from sharp-blunt injury to the bone. The microscope facilitates analysis unachievable with macroscopic methods, some three-dimensional characteristics not visible to the naked eye being clearly defined with its use. Emphasis has been placed on the value of SEM as an anthropologist's tool in bone lesion injuries.     

Fatal hunting injuries in North Rhine-Westphalia

The investigation covers 14 fatal hunting accidents which occurred in North Rhine-Westphalia in the last 23 years, among them 13 firearm fatalities. All the accidents happened during the statutory hunting season reaching a peak in the main small game season. 86% of the persons causing the accidents and 73% of the victims were over 41 years and experienced hunters. 36% of the accidents were caused by the victims themselves. The fatal gunshot injuries were inflicted by rifle bullets in 7 cases (54%) and shotgun pellets in six cases (46%). No accidents were due to shotgun slugs or handgun ammunition. The main factors responsible for the fatalities were: covering the victim while swinging on the game (31%), failure to discharge the firearm while descending from the raised hide or transporting the weapon in vehicles (31%), mistaking the victim for game (15%), failure to discharge the weapon during a hunting break or while pressing down obstacles or careless handling of the weapon (23%). In no case was the accident caused by a defective weapon or ammunition. In conclusion aspects of preventing fatal hunting accidents are discussed.     

Fatal exsanguination following complete transection of femoral vessels due to angle grinder injury in an industrial accident

Angle grinders are one of the most dangerous and frequently used tools in industrial settings. Angle grinder injuries range from superficial cuts to deep penetrating injuries with underlying fracture-dislocation and vascular trauma. The injuries caused by angle grinders mostly involve the head, face, or upper limbs, while the lower limb is an unusual site. The high-speed rotating disc of the angle grinders does not respect anatomical boundaries or structures; therefore, the injuries caused may be disfiguring, permanently incapacitating, or even fatal. We report a fatal case of an angle grinder injury to the lower limb. The victim sustained a sharp cut over the left thigh while woodworking in an industrial setup. The rotating disc of an angle grinder had transected the skin, subcutaneous fat and muscles, and both the femoral vessels of the left side, which led to fatal exsanguination within 10 min of the incident.     

道路交通事故死者MSCT扫描与尸体解剖结果的比较

目的使用多层螺旋CT(MSCT)对道路交通事故中死者的损伤进行观察分析,探索MSCT在道路交通事故鉴定中的应用价值。方法对10例道路交通事故死亡者进行全身MSCT扫描,随后进行系统尸体解剖,并将两者的结果进行对比,分析两者在获取交通事故损伤信息方面的优点和不足。结果 MSCT可以清晰显示身体各部位骨折三维形态特征,并可检查到全身各部位的积气,相对于尸体解剖优势明显;但对于器官和软组织损伤的检测,MSCT的分辨率有限。结论对于道路交通事故死者,确定死亡方式和死亡原因的最好方法是联合进行MSCT检查和尸体解剖。