Anthropological and radiographic comparison of vertebrae for identification of decomposed human remains

This case study demonstrates the importance of involving an anthropologist in forensic situations with decomposed remains. Anthropological consultation was used in conjunction with the comparison of antemortem and postmortem radiographs to establish positive identification of unknown, decomposed remains. The remains had no traditional identifying features such as fingerprints or dental. Through anthropological analysis, it was determined the decedent was male, between 20 and 23 years at time of death and c. 5'2' tall. This information allowed for a presumptive identification and a request for antemortem radiographs. The missing person was identified comparing the spinous processes of the cervical and thoracic vertebrae between ante- and postmortem radiographs.     

Implant Bone Integration Importance in Forensic Identification

Odontological identification consists of the comparison of antemortem dental information regarding a missing person with postmortem data from an unidentified corpse or human remains. Usually, the comparison concerns morphologic features that the operator chooses among all the visible characteristics because of inter‐individual uniqueness; for this reason, implants can be of enormous assistance. A case concerning the recovery of a burnt oral implant, connected to a bone fragment, among 2780 charred bone fragments, suspected to have belonged to a victim of homicide, is presented to demonstrate that dental implants and their site of bone integration represent a very precious element for personal forensic identification. Because of their morphological invariability in time and because of their morphologic uniqueness, they were used as evidence to associate unidentified human charred remains to a missing person where DNA analysis failed to do so. The case illustrates the fundamental contribution, not yet described in literature, given by the clinical aspects of tooth replacement with dental implants to a forensic discipline. Clinical practitioners should therefore be aware of the great importance of their work and of dental records in a forensic identification scenario.     

Anthropological and Radiographic Comparison of Antemortem Surgical Records for Identification of Skeletal Remains*

Abstract: This case review illustrates the important contributions of forensic archeological methods and forensic anthropological analysis to the identification of found skeletal remains. After reassociation of skeletal remains found in two locations, anthropological analysis provided the basis for a presumptive identification and a request for antemortem medical records. Partial DNA profiles were supportive but not conclusive and antemortem dental records were not available. Comparison of antemortem traumas, skeletal morphology, and surgical artifacts with antemortem radiographs and surgical records led to positive identification of an individual missing for almost a decade.     

Dental CT imaging as a screening tool for dental profiling: advantages and limitations

The use of dental processing software for computed tomography (CT) data (Dentascan) is described on postmortem (pm) CT data for the purpose of pm identification. The software allows reconstructing reformatted images comparable to conventional panoramic dental radiographs by defining a curved reconstruction line along the teeth on oblique images. Three corpses that have been scanned within the virtopsy project were used to test the software for the purpose of dental identification. In every case, dental panoramic images could be reconstructed and compared to antemortem radiographs. The images showed the basic component of teeth (enamel, dentin, and pulp), the anatomic structure of the alveolar bone, missing or unerupted teeth as well as restorations of the teeth that could be used for identification. When streak artifacts due to metal-containing dental work reduced image quality, it was still necessary to perform pm conventional radiographs for comparison of the detailed shape of the restoration. Dental identification or a dental profiling seems to become possible in a noninvasive manner using the Dentascan software.     

Identification of a skeleton using DNA from teeth and a PAP smear.

Identification of unknown living or deceased persons using dental treatment records is an established forensic technique. However, some cases remain unidentified, especially when antemortem dental records are not available for comparison to postmortem dental records. Cytological smears have been previously reported to be potential sources of DNA reference samples which can be compared to DNA recovered from found human remains. The case described here involves an adult skeleton which exhibited extensive, complex dental restorative treatment. A putative identification of the found skeleton as a missing woman was established using circumstantial evidence found at the scene. However, it became important to establish a positive identification using reliable scientific methods. When it was discovered that antemortem dental records were not available because the treatment was completed in another country and the treating dentist could not be found, cytological smears stained with Papanicolaou (PAP) stain obtained from the putative decedent's medical records were used as a reference DNA sample. DNA was recovered from the teeth of the skeleton using cryogenic grinding. Comparison of the genotypes resulted in the conclusion that the DNA originated from the same source. The use of PAP smears in this way is seen as a valuable resource in cases where positive identification using traditional dental and medical records is not possible.     

Reconstruction of root morphology in skeletonized remains with postmortem dental loss.

A reversible technique is presented in which the root morphology of missing teeth in skeletonized human remains can be reconstructed for the purpose of radiographic comparison and postmortem identification. In this technique, which is based upon pilot studies with skeletonized mandibles of archival remains, the alveolar socket walls are sealed with a coat of cyanoacrylate cement and injected with a mixture of vinyl polysiloxane and barium sulfate. Radiographs are produced with the radiopaque mixture in place, which highlights the antemortem morphology of the roots. Subsequently, the impression material is removed, resulting in no gross alteration of the evidence. The radiographs made with this technique, as well as the impressions, can be stored for later use at a trial or pending the discovery of antemortem dental evidence.     

A Radiographic Study on the Utility of Cranial Vault Outlines for Positive Identifications

A standard method for positive identification is the use of antemortem and postmortem radiographic comparisons. The purpose of this research is to test the visual accuracy of antemortem and postmortem radiographic comparisons of cranial vault outlines and to evaluate their uniqueness using geometric morphometric methods. A sample of 106 individuals with varying levels of education and forensic case experience participated in a visual accuracy test. Of the 106 individuals, only 42% correctly assigned all of the radiographs, with accuracy rates ranging from 70 to 93% for each radiographic comparison. Vault shape was further examined using elliptic Fourier analysis, and paired t‐tests were computed on the first 10 principal components accounting for 100% of the variance, which found no significant differences. The visual accuracy test and elliptic Fourier analysis shows that vault outlines may not be unique enough for positive identifications when used as a sole indicator.     

Root Morphology and Anatomical Patterns in Forensic Dental Identification: A Comparison of Computer‐Aided Identification with Traditional Forensic Dental Identification*

Abstract: An online forensic dental identification exercise was conducted involving 24 antemortem–postmortem (AM–PM) dental radiograph pairs from actual forensic identification cases. Images had been digitally cropped to remove coronal tooth structure and dental restorations. Volunteer forensic odontologists were passively recruited to compare the AM–PM dental radiographs online and conclude identification status using the guidelines for identification from the American Board of Forensic Odontology. The mean accuracy rate for identification was 86.0% (standard deviation 9.2%). The same radiograph pairs were compared using a digital imaging software algorithm, which generated a normalized coefficient of similarity for each pair. Twenty of the radiograph pairs generated a mean accuracy of 85.0%. Four of the pairs could not be used to generate a coefficient of similarity. Receiver operator curve and area under the curve statistical analysis confirmed good discrimination abilities of both methods (online exercise = 0.978; UT‐ID index = 0.923) and Spearman’s rank correlation coefficient analysis (0.683) indicated good correlation between the results of both methods. Computer‐aided dental identification allows for an objective comparison of AM–PM radiographs and can be a useful tool to support a forensic dental identification conclusion.     

Identification of the Edentulous Individual: An Investigation into the Accuracy of Radiographic Identifications*

Abstract: The dental identification of edentulous individuals can be challenging based on the lack of antemortem materials and unique features visible on radiographs. The constant resorption of the alveolar ridges further complicates the process. The purpose of this study was to quantify the error rate and reliability of dental identifications based on a comparison of synthesized antemortem and postmortem radiographs of edentulous individuals. Ten observers examined ten cases on two occasions and reported dichotomous and conclusion level decisions. These were analyzed using Kappa and Receiver Operator Characteristics. The mean area under the curve was 0.75 and the mean sensitivity was 0.57 and specificity was 0.83. These results suggest that dental identifications of edentulous individuals using radiographs alone have a high error rate and should be dual reported. These data add further weight to the argument that all dental prostheses should be labeled.     

Postmortem dental radiography

Comparison of postmortem and antemortem dental radiographic films or digital images is a common procedure for establishing identity of human remains. This article describes some problems with producing postmortem dental radiographs in a medical examiner setting and gives methods for circumventing these difficulties. Resection of the jaws, when permitted, significantly simplifies the postmortem radiographic technique. When producing an actual postmortem panoramic dental radiograph (orthopantomogram) from a dry skull, stabilization of the specimen for exposure by the moving beam source may be accomplished simply by placing the specimen upside down on an anthropologist's skull ring. Image "burnout" in the anterior segment, which results from absence of the tissues of the neck, may be avoided by appropriate placement of radiodense objects such as "zippered" plastic bags filled with water or other fluid material, freezer gel packs, or a block of self-polymerizing acrylic. These methods may increase future postmortem dental radiography efficiency.     

A Pilot Study Comparing Postmortem and Antemortem CT for the Identification of Unknowns: Could a Forensic Pathologist Do It?

Forensic pathologists are commonly tasked with identifying human remains. Although DNA analysis remains the gold standard in identification, time and cost make it particularly prohibitive. Radiological examination, more specifically analog imaging, is more cost-effective and has been widely used in the medical examiner setting as a means of identification. In the United States, CT imaging is a fairly new imaging modality in the forensic setting, but in more recent years, offices are acquiring CT scans or collaborating with local hospitals to utilize the technology. To broaden the spectrum of potential identifying characteristics, we collected 20 cases with antemortem and postmortem CT images. The results were qualitatively assessed by a forensic pathologist and a nonmedically trained intern, and all cases were correctly identified. This study demonstrates that identification of human remains using visual comparison could be performed with ease by a forensic pathologist with limited CT experience.     

Self-assessment of the forensic value of dental records.

One of the most important aspects of a person's dental record may well prove to be it's potential value should the forensic dental identification of their remains become necessary. The better the quality of the antemortem dental records, the easier and faster the identification of the remains will be. The forensic dentist must be able to select identifying features by decoding the deceased's antemortem dental records. A study was conducted on two groups of dentists who were asked to self-assess the forensic dental value of the dental records maintained in their own practices. The three most frequently recorded identifying dental features, other than caries and restorations, were the presence of diastemas, displaced or rotated teeth, and dental anomalies. Surveyed dentists imbedded identifying information into the removable prosthetic devices fabricated for their patients an average of only 64% of the time. Only 56% of the two groups combined felt that their dental chartings and written records would be extremely useful in dental identifications. It is concluded that the quality of antemortem dental records available for comparison to postmortem remains varies from inadequate to extremely useful. Practicing dentists can become valuable members of the dental identification process by developing and maintaining standards of record keeping which would be valuable in restoring their patients' identity.     

Antemortem dental records: attitudes and practices of forensic dentists

This study was designed to provide insight concerning the attitudes and practices of forensic dentists regarding antemortem dental records reviewed for purposes of dental identification. Forensic dentists were invited to participate in a 10 item survey. The majority of the respondents reported a considerable amount of experience in dental identifications of the deceased. Sixty-six percent reported having suspected dental negligence or fraud in their antemortem record reviews. Only 17% believe that a forensic dentist should report suspected dental negligence, while 31% agree that dental fraud should be reported. Their response to additional issues addressed in the study suggests diversity in the practices and attitudes of forensic dentists in the use of antemortem dental records. In conclusion, opening a dialogue among practicing forensic dentists may lead to a standardized set of recommendations by the appropriate societies in the forensic dental community.     

Digital dental radiographic identification in the pediatric, mixed and permanent dentitions.

The purpose of this paper is to investigate the utility of digital dental radiographic superimposition in the various stages of development of the human dentition. Digital, computer assisted dental identification is a means of identification which allows the spatial relationships of the root and support structures of the teeth to be compared one to the other. The technique has not been tested in patients with developing dentitions. Dental radiographs from patients in the pediatric, mixed and permanent dentition stages of development, simulating "antemortem" and "postmortem" radiographs, were digitized using a flat field radiograph scanner. Anatomic features were used as points of comparison utilizing image editing software whereby anatomic sections were digitally cut from the antemortem image and compared to the same anatomic locations on the postmortem image to assess for points of concordance. The technique was applied to 25 cases within the primary dentition, 25 cases within the mixed dentition and 25 cases within the permanent dentition. Results showed that this was a viable technique within both the pediatric and permanent dentition although it was of little value within the mixed dentition.     

Usefulness of Forensic Dental Symbols© and Dental Encoder© database in forensic odontology

Abstract: A new universal graphic dental system, Forensic Dental Symbols^©, has been created to provide precision in the construction of dental records, improve standardization, and increase efficiency in dental identification procedures. Two hundred and thirty‐four different graphic symbols representing the most frequent clinical status for each tooth were designed. Symbols can be then converted to a typographic font and then are ready to use in any computer. For the appropriate use, manipulation, and storage of dental information generated by the Forensic Dental Symbols^©, Dental Encoder^© database has been created. The database contains all the information required by INTERPOL Disaster Victim Identification (DVI)‐dental‐forms. To explore the possibilities that Dental Encoder^© offers, an antemortem dental database from a Spanish population of 3920 military personnel had been constructed. Data generated by Dental Encoder^© were classified into sex and age groups. The program can perform an automatic search of the database for cases that match a selected clinical status presented in a single tooth or a combination of situations for several teeth. Moreover, Dental Encoder^© allows information to be printed on INTERPOL DVI‐dental‐forms, or the inclusion of any completed form into any document, technical report, or identification of dental report.     

GrinLine Identification Using Digital Imaging and Adobe Photoshop*

Abstract: The purpose of this study was to outline a method by which an antemortem photograph of a victim can be critically compared with a postmortem photograph in an effort to facilitate the identification process. Ten subjects, between 27 and 55 years old provided historical pictures of themselves exhibiting a broad smile showing anterior teeth to some extent (a grin). These photos were termed “antemortem” for the purpose of the study. A digital camera was used to take a current photo of each subject’s grin. These photos represented the “postmortem” images. A single subject’s “postmortem” photo set was randomly selected to be the “unknown victim.” These combined data of the unknown and the 10 antemortem subjects were digitally stored and, using Adobe Photoshop software, the images were sized and oriented for comparative analysis. The goal was to devise a technique that could facilitate the accurate determination of which “antemortem” subject was the “unknown.” The generation of antemortem digital overlays of the teeth visible in a grin and the comparison of those overlays to the images of the postmortem dentition is the foundation of the technique. The comparisons made using the GrinLine Identification Technique may assist medical examiners and coroners in making identifications or exclusions.     

Personal identification based on radiographic vertebral features

Personal identification of human remains constitutes about 10% of the normal caseload of any forensic medicine practice. Identification can be achieved by a variety of methods, one of which is the comparison of antemortem and postmortem radiographs. There are numerous accounts of cranial and dental radiographic features useful for identification, whereas the availability of postcranial radiographs and especially plates that depict the vertebral column is less widespread among the forensic community. The authors here review the various vertebral features instrumental in positive identification that can be identified on radiographs of the spine.     

Computerized Dental Comparison: A Critical Review of Dental Coding and Ranking Algorithms Used in Victim Identification

Comparison of antemortem and postmortem dental records is a leading method of victim identification, especially for incidents involving a large number of decedents. This process may be expedited with computer software that provides a ranked list of best possible matches. This study provides a comparison of the most commonly used conventional coding and sorting algorithms used in the United States (WinID3) with a simplified coding format that utilizes an optimized sorting algorithm. The simplified system consists of seven basic codes and utilizes an optimized algorithm based largely on the percentage of matches. To perform this research, a large reference database of approximately 50,000 antemortem and postmortem records was created. For most disaster scenarios, the proposed simplified codes, paired with the optimized algorithm, performed better than WinID3 which uses more complex codes. The detailed coding system does show better performance with extremely large numbers of records and/or significant body fragmentation.     

Identification of exhumed remains of fire tragedy victims using conventional methods and autosomal/Y-chromosomal short tandem repeat DNA profiling

In a fire tragedy in Manila in December 1998, one of the worst tragic incidents which resulted in the reported death of 23 children, identity could not be established initially resulting in the burial of still unidentified bodies. Underscoring the importance of identifying each of the human remains, the bodies were exhumed 3 months after the tragedy. We describe here our work, which was the first national case handled by local laboratories wherein conventional and molecular-based techniques were successfully applied in forensic identification. The study reports analysis of DNA obtained from skeletal remains exposed to conditions of burning, burial, and exhumation. DNA typing methods using autosomal and Y-chromosomal short tandem repeat (Y-STR) markers reinforced postmortem examinations using conventional identification techniques. The strategy resulted in the identification of 18 out of the 21 human remains analyzed, overcoming challenges encountered due to the absence of established procedures for the recovery of mass disaster remains. There was incomplete antemortem information to match the postmortem data obtained from the remains of 3 female child victims. Two victims were readily identified due to the availability of antemortem tissues. In the absence of this biologic material, parentage testing was performed using reference blood samples collected from parents and relatives. Data on patrilineal lineage based on common Y-STR haplotypes augmented autosomal DNA typing, particularly in deficiency cases.