The Critical Angle for Perforation versus Ricochet of a .38 CAL. LRN Bullet on a Windshield

From forensic point of view, it is important to clarify the condition whether ricochet or perforate for a bullet fired toward the automobile windshield. The purpose of this study was to specify the critical angle at which the ricochet of the fired bullet takes place. To estimate the result of firing, a rigid‐body dynamics simulation of the bullet together with the test‐firing using .38 CAL. LRN bullet was examined. It was found both from numerical simulation and firing test that when the incidence angle is <45°, a complete perforation of the windshield was observed, whereas the bullet ricocheted remaining a characteristic damage on the windshield when the incidence angle is >60°. To measure the static failure resistance of various windshields, static indentation test was also examined.     

The effect of annealing on the variation of glass refractive index

The variation of refractive index (RI) over a non-toughened, float pane of glass and a toughened, float pane of glass was investigated. The two panes of colourless, float glass were cut into 150 5 cm × 5 cm squares. The pre- and post-annealing RI values from three random areas from each square were measured. Bayesian statistical hierarchical modelling of the results showed that for the non-toughened, float glass pane annealing increased the variability in RI by a factor of 1.29-1.58, with a mean of 1.43 (with 95% probability); and for the toughened, float pane of glass annealing decreased the variability in RI by a factor of 0.63-0.76, with a mean of 0.69 (with 95% probability). In addition it was found that although there were no systematic differences in ΔRI across either pane of glass, there were observable differences across both panes of glass. These results provide information regarding the expected RI variation over entire panes of both non-toughened and toughened float window glass for both pre- and post-annealing RI measurements.     

Spatial variation of refractive index in a pane of float glass.

In the statistical interpretation of forensic glass evidence it is standard practice to make the assumption of homogeneity of the refractive index (RI) of the source glass, or of localized homogeneity. However, the work of Locke and Hayes showed that, for toughened windscreen glass, this assumption might not be true. This work is well cited, but there appears to have been little follow-on published research. Furthermore, the toughening process is something known to affect the refractive index, and is a process that float glass does not undergo. Float glass is a major component of casework in New Zealand and for that reason it would be interesting to know whether the findings of Locke and Hayes apply when dealing with float glass. In this paper we describe an experiment similar to that of Locke and Hayes, systematically examining the variation of RI in a pane of float window glass. It was found that, although there were no systematic differences in refractive index, there were observable differences across the pane.     

Proposed Method for Predicting Pair Matching of Skeletal Elements Allows Too Many False Rejections

Byrd proposes a method for predicting pair matches in commingled remains to reduce visual comparison. The method compares differences between left and right postcranial element measurements in commingled samples with differences in known pairs from a reference sample using a t‐score approach. We duplicated his protocol using six elements from two samples of known paired elements (n = 854 to 1063) and calculated the number of pairs correctly predicted. Time commitment was estimated by mathematically attempting matches with all left and right elements in these samples. Although the results show an 86% reduction in the number of potential pairs requiring visual matching, we do not recommend the method because (i) the normality assumption for use of a t‐score approach is violated, (ii) no account is made for bilateral asymmetry, and (iii) the high rate of false rejections (up to 22%) undermines its ability to show true incompatibilities for potential pair matches.     

A Test of Sex Estimation in Subadults Using the Elevation of the Auricular Surface from Four Samples of Known Age and Sex

Biological sex is foundational to the work of forensic anthropologists and bioarcheologists. The lack of reliable biological sex estimation methods for subadults has, thus, greatly limited forensic and bioarcheological analyses. Auricular surface elevation showed promise as a subadult sex estimation method in previous studies. This study examined two auricular surface elevation evaluation methods on four subadult samples of known age, sex, and ancestry. Samples were scored as “male,” “female,” or “indeterminate” and results were examined with chi‐square analysis. No consistent sex estimation pattern, accuracy, or predictive value was produced between samples. Only one test was significant using Fisher's exact test analysis (FET = 7.501, p < 0.022): the composite approach on the Hamann‐Todd sample. While age, sample size, or developmental factors may play a role in these results, clearly sample variation does as well. This study found auricular surface elevation was not a useful subadult sex estimation method.     

The deviation of bullets passing through window panes

The deviation of bullets passing through window pane glass of a thickness of 6 mm was investigated for varying angles of incidence. Projectiles of calibre 0.22 and 0.38 (wadcutter) were used. The 0.22 bullets break into multiple pieces, resulting in a large distribution of exit angles. An increasing deviation of 0.38 wadcutter projectiles was seen for increasing angles of incidence. For incident angles larger than 35°, an unexpected ricochet was noticed. This phenomenon is of importance when examining crime scenes. A number of parameters which have to be taken into account for further experiments is suggested.     

Evaluation of match criteria used for the comparison of refractive index of glass fragments

For comparative glass examinations, the refractive indices (RIs) of recovered glass fragments are often compared to a test interval defined by measurements from a broken glass object. RI measurements from five modern float glasses were used via resampling to assess the frequencies of false exclusion errors for eight test criteria as functions of the number of measurements. The test criteria were based on ranges, fixed intervals, and multiples of standard deviations of the known source measurements. The observed error rates for the eight tests studied are between zero and c. 35%, depending upon the match criteria, the number of measurements, and the RI distribution for a glass source. The results of this study can be used to predict the false exclusion rate for a test criterion under a given set of conditions or to select test criteria that result in a desired error rate for these typical sheet glasses.     

Mastoid Triangle for Sex Determination in Adult Nigerian Population: A Validation Study

In the quest for a simple, reliable technique to estimate the sex of human remains several novel metric skeletal indices have been reported. Only a few have been examined for utility in populations different from those in which they were developed. In this study, the mastoid process was evaluated for sex determination using 102 lateral cephalograms of a Nigerian sample of known age and sex. The asterion‐mastoidale distance and mastoid triangular area were sexually dimorphic with mean values higher in males compared with females (p = 0.02). On analysis of the discriminant function, overall accuracy for sex classification was 55%. On cross‐validation, the triangular area accurately identified 80% of females and 48% of males. The asterion‐mastoidale distance was slightly more accurate at sexing the sample. The practical utility of the mastoid triangle area technique to differentiate sex in Nigerian populations is not supported by the results of this study.     

Application of false discovery rate procedure to pairwise comparisons of refractive index of glass fragments

This study was undertaken to apply a new method of controlling type I error when performing pairwise comparisons. The Benjamini and Hochberg false discovery rate (FDR) controlling procedures have proved to be very powerful tools in solving many practical problems but have not yet been applied to pairwise comparisons of refractive index of glass samples. Students t-test and Welch test (unequal variance Student's t-test) were applied to all possible pairwise comparisons. The comparisons were made on the basis of refractive index values of 72 glass fragments from different car windows and 69 different fragments from one windscreen. The type I error was controlled by the use of Benjamini and Hochberg false discovery rate (FDR) controlling procedure. To illustrate the importance of controlling type I error when using pairwise comparisons, results of pairwise comparisons with the FDR controlling procedure were compared to those comparisons made without any controlling procedure. Significantly fewer false negative results (false rejection of H0) were found during the use of FDR procedure in the comparison of refractive indices from the same windscreen than when comparing without controlling type I error. The results of application of FDR method were also compared to the results of other post-hoc tests, such as Tukey HSD test and Bonfferoni test. The FDR method has higher power than Bonferroni method and Tukey HSD method and control errors better than comparing without controlling type I error. The method of choice, for pairwise comparison of glass fragments on the basis of refractive index is Welch test with FDR adjustment. The method gave type I errors at level about 5.3% and type II error at about 3.7%.     

Morphoscopic Trait Expression in “Hispanic” Populations

This study evaluates population variation of eight cranial morphoscopic traits using samples of known southwest Hispanics (n = 72), Guatemalans (n = 106), American Blacks (n = 146), and American Whites (n = 218). We applied the support vector machine (SVM) method to build a prediction model based on a subsample (20%) of the data; the remainder of the data was used as a test sample. The SVM approach effectively differentiated between the four groups with correct classification rates between 72% (Guatemalan group) and 94% (American Black group). However, when the Guatemalan and southwest Hispanic samples were pooled, the same model correctly classified all groups with a higher degree of accuracy (American Black = 96%; American White = 77%; and the pooled Hispanic sample = 91%). This study also identified significant differences between the two Hispanic groups in six of the eight traits using univariate statistical tests. These results speak to the unique population histories of these samples and the current use of the term “Hispanic” within forensic anthropology. Finally, we argue that the SVM can be used as a classification model for ancestry estimation in a forensic context and as a diagnostic tool may broaden the application of morphoscopic trait data for the assessment of ancestry.     

Interpretation of glass composition measurements: the effects of match criteria on discrimination capability

The concentrations of ten elements in 209 unrelated glass specimens received as evidence were used to assess the frequencies of errors of false association (Type II errors) using several comparison criteria at specified significance levels (Type I errors). Pairwise comparisons of the samples using either the equal-variance t-test or Welch's modification (unequal variances) result in a small number of errors of false association, even when adjusting the significance level (Bonferroni correction) for multivariate comparisons. At the 95% confidence level (overall Type I error of 0.05, or individual element comparison error of 0.005), only two Type II errors are made in 21736 comparisons (0.009%) when using the equal-variance t-test for comparison of sample means. In this study, the range overlap test using three replicate measurements per specimen results in no errors of false association. Most specimen pairs in this data set are readily discriminated either by differences in the concentrations of several elements or by an extremely large difference in the concentrations of one or more element.     

Elemental analysis of glass fragments by ICP-MS as evidence of association: analysis of a case

Inductively coupled plasma mass spectrometry (ICP-MS) was used to analyze glass evidence from a case in which a person broke a window in each of 15 vehicles in a parking lot in order to gain entry into the vehicles. The results of the analysis by traditional methods, which measure the properties of color, thickness, density, and refractive index, are also reported. A total of 15 known samples representing the windows on the cars and 42 questioned glass fragments recovered from the suspect and the police vehicle where the suspect was sitting were submitted for analysis. Density comparisons separated one of the known samples into three samples, increasing the number of known samples from 15 to 17. The concentrations of 16 elements were measured for all but three of the samples using an external calibration ICP-MS method with internal standardization. Color assessment (non-instrumental) separated the 17 known samples into two groups, and refractive index measurements resulted in six groups when the Emmons double variation method was used and ten groups when the Glass Refractive Index Measurement 2 (GRIM2) system was used. Elemental analysis, by itself, differentiated all of the known samples from each other and associated four of the known sample fragments with several of the questioned sample fragments. The informing power of RI, density, and elemental analysis comparisons is evaluated and a summary of the case results is reported.     

Spectrofluorimetric and Spectrophotometric Analysis of Two Analgesic Drugs in Pharmaceutical Formulations and Biological Fluids

Simple, reliable, sensitive, and accurate spectrofluorimetric and spectrophotometric methods were proposed for the determination of two selected analgesic drugs, namely tramadol and morphine, in pharmaceuticals and biological fluids. The proposed methods were based on the oxidation of the studied drugs by Cerium (Ce)IV in an acidic medium. The spectrofluorimetric method is based on measuring the relative fluorescence intensity of Ce(III) arising from Ce(IV) at 350 nm with an excitation wavelength at 250 nm. The spectrophotometric method involves on addition of a known excess of Ce(IV) to the studied drugs in an acid medium, followed by the determination of residual Ce(IV) by reacting with a fixed amount of methyl orange and measuring the absorbance at 510 nm. Different variables affecting the reaction conditions, such as the concentrations of Ce(IV), type and concentration of the acid medium, reaction time, temperature, and the diluting solvents, were carefully studied and optimized.     

The Effects of Continuous Application of the TASER X26 Waveform on Sus scrofa,

This study investigated and evaluated the safety margins of the continuous long duration (up to 30 min) effect of the TASER X26 waveform, using a Sus scrofa model. Long duration continuous stimulus has not been evaluated on humans or human surrogates prior to this study. Swine were used as models due to similarities with humans in their skin and cardiovascular systems. Very long duration was used to determine both exposure dose and possible adverse physiological effects of dose. The trial began with an application of 10 min, and subsequent animals received increasing exposure time up to a survived maximum duration of 30 min. At the onset of this work, it was hypothesized that there would be a time limit after which most animals would not survive consistent with increased dose response. However, this hypothesis was not supported by the experimental results. All animals (10 of 10) survived up to 3 min. Seven of the 10 animals survived up to a 10‐min exposure and 3 of 5 animals with a 30‐min target exposure survived the full exposure. Surviving animals were recovered and observed for 24 h, with no postrecovery deaths. This suggests that swine (based on physiology) will not experience a fatal event when exposed to the TASER X26 for a continuous 3 min. Conclusions regarding longer duration (10–30 min) are not as certain due to the small sample sizes at these time intervals.     

Comparative Forensic Soil Analysis of New Jersey State Parks Using a Combination of Simple Techniques with Multivariate Statistics,

This study has shown that the combination of simple techniques with the use of multivariate statistics offers the potential for the comparative analysis of soil samples. Five samples were obtained from each of twelve state parks across New Jersey in both the summer and fall seasons. Each sample was examined using particle‐size distribution, pH analysis in both water and 1 M CaCl₂, and a loss on ignition technique. Data from each of the techniques were combined, and principal component analysis (PCA) and canonical discriminant analysis (CDA) were used for multivariate data transformation. Samples from different locations could be visually differentiated from one another using these multivariate plots. Hold‐one‐out cross‐validation analysis showed error rates as low as 3.33%. Ten blind study samples were analyzed resulting in no misclassifications using Mahalanobis distance calculations and visual examinations of multivariate plots. Seasonal variation was minimal between corresponding samples, suggesting potential success in forensic applications.     

Virtual Tool Mark Generation for Efficient Striation Analysis,

This study introduces a tool mark analysis approach based upon 3D scans of screwdriver tip and marked plate surfaces at the micrometer scale from an optical microscope. An open‐source 3D graphics software package is utilized to simulate the marking process as the projection of the tip's geometry in the direction of tool travel. The edge of this projection becomes a virtual tool mark that is compared to cross‐sections of the marked plate geometry using the statistical likelihood algorithm introduced by Chumbley et al. In a study with both sides of six screwdriver tips and 34 corresponding marks, the method distinguished known matches from known nonmatches with zero false‐positive matches and two false‐negative matches. For matches, it could predict the correct marking angle within ±5–10°. Individual comparisons could be made in seconds on a desktop computer, suggesting that the method could save time for examiners.     

Influence of Paraquat on Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae) Infesting Minced‐beef Substrates in Kelantan,Malaysia

This study investigated the influence of paraquat, a prevalent poison used by suicides, on initial oviposition and development of Chrysomya megacephala (Fabricius) using minced‐beef substrates. Paraquat in lethal dose for human (40 mg/kg), two times the lethal dose (80 mg/kg) and five times the lethal dose (200 mg/kg) were mixed thoroughly with respective minced‐beef substrates (1 kg each) that were decomposed in a shaded habitat fully protected from rain. Results of four replications of the above experiment revealed that the presence of paraquat neither delayed initial oviposition nor prolonged the developmental stages of C. megacephala. Therefore, estimation of postmortem interval (PMI) based on empirical baseline data obtained using animal models devoid of any poisons would still be appropriate for estimating PMI in paraquat‐related deaths.     

Ultrafast Amplification of DNA on Plastic Microdevices for Forensic Short Tandem Repeat Analysis

The majority of microfluidic devices used as a platform for low‐cost, rapid DNA analysis are glass devices; however, microchip fabrication in glass is costly and laborious, enhancing the interest in polymeric substrates, such as poly (methyl methacrylate) (PMMA), as an inexpensive alternative. Here, we report amplification in PMMA polymerase chain reaction (PCR) microchips providing full short tandem repeat profiles (16 of 16 loci) in 30–40 min, with peak height ratios and stutter percentages that meet literature threshold requirements. In addition, partial profiles (15 of 16 loci) were generated using an ultrafast PCR method in 17.1 min, representing a ~10‐fold reduction in reaction time as compared to current amplification methods. Finally, a multichamber device was demonstrated to simultaneously amplify one positive, one negative, and five individual samples in 39 min. Although there were instances of loci dropout, this device represents a first step toward a microfluidic system capable of amplifying more than one sample simultaneously.     

Bone Mineral Density Adult Age Estimation in Forensic Anthropology: A Test of the DXAGE Application

Estimating age‐at‐death of individuals represented only by skeletonized human remains is a fundamental aspect of forensic anthropological casework. Recently, several researchers have proposed that bone mineral density (BMD) is a useful predictor of age‐at‐death in forensic contexts. Navega et al. (JFS 63(2):497–503) developed an online application called DXAGE for calculating age‐at‐death from BMD parameters. This study tests the utility of DXAGE by utilizing data from the National Health and Nutrition Examination Survey (NHANES). BMD data from a female subsample (n = 470) of the NHANES 2007–2008 dataset were analyzed, and the relationship between predicted age and real age was examined. Inaccuracy was 14.25 years, and bias was ?7.20 years. Results show that there is a weak correlation between predicted and actual age (r = 0.47) using the DXAGE application. While BMD data are potentially useful for predicting age age‐at‐death, the DXAGE application should be used cautiously in forensic anthropological contexts.     

A Test of a Recently Devised Method of Estimating Skeletal Age at Death using Features of the Adult Acetabulum

Estimation of age at death from adult skeletal remains is highly problematic, due in great part to interpopulation variability in skeletal age changes. Thorough testing of aging methods is therefore of key importance. A method recently devised by Calce (Am J Phys Anthropol 148 (2012): 11–23) for placing adult skeletons into three broad age at death classes (17–39, 40–64, 65+ years) on the basis of acetabular morphology is tested on a collection of 18–19th century AD skeletons (N = 185) of documented age at death from London. Results showed that 45% were correctly assigned to age class using this method. This compares with 81% reported by Calce on 20th century North American material. This indicates significant interpopulation differences in the relationship between the Calce acetabular variables and age, even between populations of European ancestry. Until the sources of this variation are better understood, caution should be used before applying this method to estimate age in unknown skeletons.