Optical enhancement of fingerprint deposits on brass using digital color mapping

Abstract: The reflection of visible light from α‐phase brass subject to surface oxidation in air at elevated temperatures is investigated. X‐ray photoelectron and auger electron spectroscopy confirm that covered areas of brass (not exposed to air) display dezincification but an absence of significant surface oxidation, confirming a differential oxidation mechanism. Visualization of differential oxidation is shown to be enhanced by selective digital mapping of colors reflected from the surface of the brass using Adobe^® Photoshop^®. Enhancement is optimal when the brass is heated to ～250°C with areas of oxidation having a mirror‐like appearance. The use of this enhancement method to produce a faithful image of fingerprint ridge characteristics is demonstrated on brass shell casings where fingerprints were deposited prefiring.     

A Comparison of Fingerprint Sweat Corrosion of Different Alloys of Brass

Fingerprint sweat from 40 donors was deposited onto samples of five α and α + β phase brasses, comprising five alloys with different copper and zinc concentrations, two of which also had the addition of small concentrations of lead. Visual grading of the visibility of the corrosion revealed that brasses with the least amount of zinc produced the most visible and fully formed fingerprints from the most donors. Consideration of previously reported mechanisms for the corrosion of brass suggests red copper (I) oxide as a likely corrosion product for low zinc brasses, and a consideration of the color, composition, and solubility of fingerprint sweat corrosion products suggests that copper (I) oxide produces good contrast and visibility with the brass substrate. Scanning electron microscope images of the corrosion of all five alloys confirmed the enhanced contrast between corroded and uncorroded areas for low zinc alloys.     

Detection and Identification of Kratom (Mitragyna speciosa) and Marijuana (Cannabis sativa) by a Real-Time Polymerase Chain Reaction High-Resolution Melt Duplex Assay,

Mitragyna speciosa (MS), a plant commonly known as kratom, is a widely used “legal high” opiate alternative for pain relief. DNA extracted from MS and 26 additional plant species was amplified by PCR using primers targeting the strictosidine beta-D-glucosidase (SGD) and secologanin synthase 2 (SLS2) genes and detected by high-resolution melt curves using three intercalating dyes. Amplicon sizes were confirmed using agarose gel electrophoresis. The observed melt temperatures for SGD and SLS2 were 77.08 ± 0.38°C and 77.61 ± 0.46°C, respectively, using SYBR^® Green I; 80.18 ± 0.27°C and 80.59 ± 0.08°C, respectively, using Radiant^™ Green; and 82.19 ± 0.04°C and 82.62 ± 0.13°C, respectively, using the LCGreen^® PLUS dye. The SLS2 primers demonstrated higher specificity and identified MS DNA at 0.05 ng/μL. In a duplex reaction, SLS2 and tetrahydrocannabinoic acid synthase gene primers detected and differentiated MS and Cannabis sativa (CS) by melt peaks at 82.63 ± 0.35°C and 85.58 ± 0.23°C, respectively, using LCGreen^® PLUS.     

A Noninvasive and Speculative Method of Visualizing Latent Fingerprint Deposits on Thermal Paper

Latent fingerprint deposits on thermal paper have been visualized noninvasively at visible wavelengths when illuminated with a UV‐A light source (peak 365 nm). A higher intensity UV source (250 W/m² at 0.38 m) gave superior fingerprint visibility when compared with a 60 W/m² (at 0.4 m) source. Removing the visible (blue) component of the light source emission did not adversely affect the visibility of the fingerprint. Sample fingerprints from 100 donors, when examined 24 h after deposition, produced identifiable fingerprints from nearly 34% of fingerprint deposits. A mechanism for the observed visibility is proposed based on low emission of visible wavelengths from areas of thermal paper coincident with the fingerprint deposit, when illuminated with UV. This is likely due to a weak color change in the thermal paper dye arising from protonated amino acid components of the sweat. This effect was not observed on nonthermal paper.     

Can the RUVIS Reflected UV Imaging System Visualize Fingerprint Corrosion on Brass Cartridge Casings Postfiring?

Comparisons are made between the visualization of fingerprint corrosion ridge detail on fired brass cartridge casings, where fingerprint sweat was deposited prefiring, using both ultraviolet (UV) and visible (natural daylight) light sources. A reflected ultraviolet imaging system (RUVIS), normally used for visualizing latent fingerprint sweat deposits, is compared with optical interference and digital color mapping of visible light, the latter using apparatus constructed to easily enable selection of the optimum viewing angle. Results show that reflected UV, with a monochromatic UV source of 254 nm, was unable to visualize fingerprint ridge detail on any of 12 casings analyzed, whereas optical interference and digital color mapping using natural daylight yielded ridge detail on three casings. Reasons for the lack of success with RUVIS are discussed in terms of the variation in thickness of the thin film of metal oxide corrosion and absorption wavelengths for the corrosion products of brass.     

Enhancing the Visibility of Injuries with Narrow‐Banded Beams of Light within the Visible Light Spectrum

The use of narrow‐banded visible light sources in improving the visibility of injuries has been hardly investigated, and studies examining the extent of this improvement are lacking. In this study, narrow‐banded beams of light within the visible light spectrum were used to explore their ability in improving the visibility of external injuries. The beams of light were induced by four crime‐lites^® providing narrow‐banded beams of light between 400 and 550 nm. The visibility of the injuries was assessed through specific long‐pass filters supplied with the set of crime‐lites^®. Forty‐three percent of the examined injuries improved in visibility by using the narrow‐banded visible light. In addition, injuries were visualized that were not visible or just barely visible to the naked eye. The improvements in visibility were particularly marked with the use of crime‐lites^® “violet” and “blue” covering the spectrum between 400–430 and 430–470 nm. The simple noninvasive method showed a great potential contribution in injury examination.     

Detection and Identification of Psilocybe cubensis DNA Using a Real‐Time Polymerase Chain Reaction High Resolution Melt Assay,

Psilocybe cubensis, or “magic mushroom,” is the most common species of fungus with psychedelic characteristics. Two primer sets were designed to target Psilocybe DNA using web‐based software and NBCI gene sequences. DNA was extracted from eighteen samples, including twelve mushroom species, using the Qiagen DNeasy^® Plant Mini Kit. The DNA was amplified by the polymerase chain reaction (PCR) using the primers and a master mix containing either a SYBR^® Green I, Radiant? Green, or LCGreen Plus^® intercalating dye; amplicon size was determined using agarose gel electrophoresis. The PCR assays were tested for amplifiability, specificity, reproducibility, robustness, sensitivity, and multiplexing with primers that target marijuana. The observed high resolution melt (HRM) temperatures for primer sets 1 and 7 were 78.85 ± 0.31°C and 73.22 ± 0.61°C, respectively, using SYBR^® Green I dye and 81.67 ± 0.06°C and 76.04 ± 0.11°C, respectively, using Radiant? Green dye.     

Photo‐ and Thermal‐Degradation Studies of Select Eccrine Fingerprint Constituents

Abstract: Photo‐ and thermal‐degradation studies on eccrine fingerprint components are presented herein. Dilute distinct solutions of urea, lactic acid, and seven amino acids were deposited on steel coupons and Teflon^® disks, exposed to artificial sunlight or heat, extracted, and analyzed. This aim of this study was to determine whether the investigated eccrine components, previously determined to be Raman active for a parallel study, experienced photo‐ or thermally induced degradation, and if so, to determine the rate and identify any detectable products. Neither the amino acids nor urea exhibited photo‐degradation; however, when heated for a period of three minutes, the onset of thermal‐degradation was initiated at 100°C for the amino acids and 100°C for urea. Lactic acid, the major polymerization initiator of superglue fuming, showed photochemical and thermal‐degradation. These results could be used for future development of new latent fingerprint visualization methods, especially when lactic acid is degraded.     

Comparison of Four Saliva Detection Methods to Identify Expectorated Blood Spatter

Blood spatter analysis is an important step for crime scene reconstruction. The presence of saliva in blood spatter could indicate expectorated blood which is difficult to distinguish from impact spatter. In this study, four saliva test methods (SALIgAE^®, Phadebas^® sheet, RSID^™-Saliva kit, and starch gel diffusion) were compared to identify the best method for detecting expectorated blood spatter. The RSID^™-Saliva kit showed the highest sensitivity even when saliva was mixed with blood, and was not inhibited by the presence of blood. The SALIgAE^® test provided easy and rapid results, but the yellow color of a positive reaction was overwhelmed by the red color of the blood. The starch gel diffusion method and the Phadebas^® sheet exhibited relatively low sensitivity and the assay took a long time. When using the RSID^™-Saliva kit for identifying saliva in blood, results should be read within 10 min.     

Visualization of Latent Fingerprint Corrosion of Brass

Abstract:  Visualization of latent fingerprint deposits on metals by enhancing the fingerprint-induced corrosion is now an established technique. However, the corrosion mechanism itself is less well understood. Here, we describe the apparatus constructed to measure the spatial variation (Δ V ) in applied potential ( V ) over the surface of brass disks corroded by latent fingerprint deposits. Measurement of Δ V for potential of 1400 V has enabled visualization of fingerprint ridges and characteristics in terms of this potential difference with Δ V typically of a few volts. This visualization is consistent with the formation of a Schottky barrier at the brass-corrosion product junction. Measurement of the work function of the corroded brass of up to 4.87 ± 0.03 eV supports previous results that suggested that the corrosion product is composed of p-type copper oxides. A model for the galvanic corrosion of brass by ionic salts present in fingerprint deposits is proposed that is consistent with these experimental results.     

Response Assessment of Thermal Papers from Four Continents to Fingerprint Development by Heat

Latent fingerprint deposits on thermal paper sourced from the U.S., China, the U.K., and Australia have been visualized by heating. U.S. and Chinese sourced paper produced two distinct types of fingerprint development. In one type (type 1), the paper dye colors where the deposit is present (as previously reported) and in the other type (type 2) the ‘inverse’ of this gives paper coloring only in areas not coincident with the deposit. Both development types gave identifiable fingerprints, the majority fading within 24 h of heating. Fingerprint development from U.K. and Australian sourced paper was exclusively type 1 and resistant to fading. Temperatures for fingerprint visualization were higher for U.S. paper (64–71°C) and Chinese paper (75–95°C) than for U.K. and Australian sourced paper (43–50°C). Particularly for Chinese sourced paper, these temperatures were within a few degrees of the normal paper color temperature. A mechanism for type 2 fingerprint development is proposed.     

Temperature‐dependent Development of Parasarcophaga similis (Meade 1876) and its Significance in Estimating Postmortem Interval

Flesh flies are commonly found insects on decaying corpses that appears slightly later than blowflies, and their development patterns are significant indicators for minimum postmortem interval (PMI_min) estimation. In this study, the flesh fly Parasarcophaga similis (Meade 1876) was reared at nine constant temperatures ranging from 15°C to 35°C to examine indicators for estimating their age. We generated three development models, including isomorphen diagram, isomegalen diagram, and thermal summation model. Larval body length at different rearing temperatures was fit into an L = a + bT + cT² + dT³ equation with which the relationship between the larval body length (L) and the time after larviposition (T) was confirmed. The pupal stage was categorized into 13 substages according to intrapuparial morphological changes, and a detailed table was generated of the pupal developmental stages at five rearing temperatures, 15°C, 20°C, 25°C, 30°C, and 35°C. This study provides fundamental data in supporting P. similis as an indicator for PMI_min estimation.     

Using Paint to Investigate Fires: An ATR‐IR Study of the Degradation of Paint Samples Upon Heating

Fire investigation is a challenging area for the forensic investigator. The aim of this work was to use spectral changes to paint samples to estimate the temperatures to which a paint has been heated. Five paint samples (one clay paint, two car paints, one metallic paint, and one matt emulsion) have been fully characterized by a combination of attenuated total reflectance Fourier transform infrared (ATR‐IR), Raman, X‐ray fluorescence spectroscopy and powder X‐ray diffraction. The thermal decomposition of these paints has been investigated by means of ATR‐IR and thermal gravimetric analysis. Clear temperature markers are observed in the ATR‐IR spectra namely: loss of ν(C = O) band, >300°C; appearance of water bands on cooling, >500°C; alterations to ν(Si–O) bands due to dehydration of silicate clays, >700°C; diminution of ν(CO₃) and δ(CO₃) modes of CaCO₃, >950°C. We suggest the possible use of portable ATR‐IR for nondestructive, in situ analysis of paints.     

Development of a PCR High‐Resolution Melt Assay for Artemisia absinthium (Wormwood) and a Triplex Assay with Two Additional “Unregulated Legal High” Species Datura stramonium (Jimson Weed) and Merremia tuberosa (Hawaiian Woodrose),

Artemisia absinthium (wormwood), a common ingredient in absinthe, contains the compound thujone, which is unregulated by the U.S. Drug Enforcement Agency. Thujone can cause an “unregulated legal high” in higher concentrations. The European Union limits thujone from Artemisia species to 35 mg/kg while the U.S. Food and Drug Administration requires less than 10 ppm to be “thujone‐free.” However, individuals can smoke or ingest A. absinthium in different forms. This study developed a polymerase chain reaction (PCR) high‐resolution melt (HRM) assay to detect and identify A. absinthium based on primer specificity, sensitivity, repeatability, and robustness. A triplex assay was performed with three “unregulated legal high” species: Datura stramonium, Merremia tuberosa, and A. absinthium; the PCR HRM assay detected and identified each plant at melt temperatures 77.42 ± 0.20°C, 83.88 ± 0.22°C, and 87.77 ± 0.15°C, respectively. The primer set developed distinguished A. absinthium from a variety of plant species and was successfully triplexed.     

Scanning Electron Microscopy–Energy‐Dispersive X‐Ray (SEM/EDX): A Rapid Diagnostic Tool to Aid the Identification of Burnt Bone and Contested Cremains

This study investigates the use of Scanning electron microscopy–energy‐dispersive X‐ray (SEM‐EDX) as a diagnostic tool for the determination of the osseous origin of samples subjected to different temperatures. Sheep (Ovis aries) ribs of two experimental groups (fleshed and defleshed) were burned at temperatures of between 100°C and 1100°C in 100°C increments and subsequently analyzed with the SEM‐EDX to determine the atomic percentage of present elements. Three‐factor ANOVA analysis showed that neither the exposure temperature, nor whether the burning occurred with or without soft tissue present had any significant influence on the bone's overall elemental makeup (p > 0.05). The Ca/P ratio remained in the osseous typical range of between 1.6 and 2.58 in all analyzed samples. This demonstrates that even faced with high temperatures, the overall gross elemental content and atomic percentage of elements in bone remain stable, creating a unique “fingerprint” for osseous material, even after exposure to extreme conditions.     

Comparison of Commercial Kits for Recovery and Analysis of Bacterial DNA From Fingerprints

In forensic science, fingerprints are a common source of evidentiary information. However, latent examination is not always successful and trace human DNA cannot always be obtained. Thus, examining the fingerprint microbiome may offer a suitable alternative to more traditional methods of forensic identification. The Zymo Research ZR Bacterial/Fungal DNA MicroPrep™ Kit, Qiagen QIAmp^® DNA Mini Kit, Promega Wizard^® Genomic DNA Purification Kit, and the MPBio FastDNA^® Spin Kit were compared for their ability to yield a sufficient amount of bacterial DNA for next-generation sequencing in order to obtain a microbiome profile. Prints were deposited onto slides, allowed to sit for up to 1 month, and total DNA isolated and quantified using each kit. The kit from Zymo Research yielded the most concentrated DNA sample (0.0084 ng/µL) in the least amount of time as compared to other kits examined. Although this amount of DNA was far below the recommended DNA concentration threshold recommended for next-generation sequencing, a microbiome profile was successfully obtained. As interest in using the microbiome of an individual as a forensic tool continues to increase, there is the possibility that the microbiome of a fingerprint could complement traditional human DNA profiling in the future. This study provides evidence that trace amounts of bacterial DNA from fingerprints is quantifiable and sufficient for microbiome analysis.     

Forensic Use of A Subtropical Blowfly: The First Case Indicating Minimum Postmortem Interval (mPMI) in Southern Brazil and First Record of Sarconesia Chlorogaster from a Human Corpse

Southern Brazil is unique due to its subtropical climate. Here, we report on the first forensic entomology case and the first record of Sarconesia chlorogaster (Wiedemann) in a human corpse in this region. Flies' samples were collected from a body indoors at 20°C. Four species were found, but only Chrysomya albiceps (Wiedemann) and S. chlorogaster were used to estimate the minimum postmortem interval (mPMI). The mPMI was calculated using accumulated degree hour (ADH) and developmental time. The S. chlorogaster puparium collected was light in color, so we used an experiment to establish a more accurate estimate for time since initiation of pupation where we found full tanning after 3 h. Development of C. albiceps at 20°C to the end of the third instar is 7.4 days. The mPMI based on S. chlorogaster (developmental time until the third instar with no more than 3 h of pupae development) was 7.6 days.     

Viability of Human Articular Chondrocytes Harvested Postmortem: Changes with Time and Temperature of In Vitro Culture Conditions

Different studies of long‐term chondrocytes viability have shown a gradual reduction as a function of time and ambient temperature. The aim of our in vitro study was to establish chondrocyte postmortem viability curves for 4°C, 11°C, 23°C, 35°C during 63 days after the donors' death. Osteochondral cylinders were procured from the knees of 16 male donors (20–47 years), stored in preservation media that was not changed, and analyzed in 3‐day intervals using a confocal laser scanning microscope. A significant influence of time on viability was found from Day 9 (p = 0.0029) and onwards (p < 0.0001). The lowest overall chondrocyte viability was at 35°C, followed by 4°C (p < 0.0001). The conditions used in this in vitro analysis suggest that similar viabilities may occur while in situ in the decedent. Further studies of chondrocyte viability from individuals with known postmortem intervals may show premise to help evaluate time since death in the late postmortem interval.     

Effect of temperature on rectifying Schottky barriers formed from fingerprint sweat corrosion of brass

Corrosive electrochemical processes of brass, including those resulting from fingerprint sweat, continue to be studied because of the widespread industrial use of brass. Here, we examine how increased temperature affects the relative abundance of fingerprint sweat corrosion products and the rectifying Schottky barrier formed between p-type copper (I) oxide corrosion and brass. X-ray photoelectron spectroscopy confirms increasing dezincification with increasing temperature. This leads to n-type zinc oxide replacing copper (I) oxide as the dominant corrosion product, which then forms a rectifying Schottky barrier with the brass, instead of copper oxide, when the temperature reaches c. 600°C. Using X-ray diffraction, resulting diodes show polycrystalline oxides embedded in amorphous oxidation products that have a lower relative abundance than the diode forming oxide. Conventional current/voltage (I/V) characteristics of these diodes show good rectifying qualities. At temperatures between c. 100 and c. 600°C, when neither oxide dominates, the semiconductor/brass contact displays an absence of rectification.     

Influence of Muzzle Instability on Bullet Deflection after Perforating Laminated Particleboards

The influence of muzzle instability on bullet deflection, when perforating laminated particleboards, was studied with three different handgun bullet types. The mean deflection angles of .32 Auto FMJ and .38 Special SJHP bullets were calculated to be 0.90° and 0.83°, respectively after perforating particleboards orthogonally at a 1 m muzzle-to-target distance. The mean angles dropped to 0.70° and 0.58° at a 15 m muzzle-to-target distance. The differences in deflection angles proved to be statistically significant (p < 0.05) with p-values of 0.023 and 0.001, respectively. The mean calculated deflection angles of .38 Special LRN bullets also dropped from 1.51° to 1.38° when the muzzle-to-target distance was increased from 1 to 15 m, but this difference was not significant (p-value of 0.357). The results support the hypothesis that muzzle instability has an influence on deflection. The possible implications for shooting incident reconstructions and for future research are discussed.