Patterned imprint mark due to the folded shoulder stock: A possible finding in contact shots from submachine guns

The muzzle imprint (barrel mark) is a pressure abrasion typically associated with contact shots. Apart from the contours of the actual muzzle profile, other constructional parts such as the front sight and/or the recoil spring guide of semiautomatic pistols may be imprinted next to the bullet entrance wound. In some types of submachine guns the shoulder stock can be folded forward so that its end partly encircles the muzzle. If such a weapon was in contact with the skin at the instant of discharge, a corresponding contusion mark is to be expected. The imprint configuration may point to the type of weapon and to the way in which the gun had been held when firing the shot. The paper presents the injury pattern in a 36-year-old man who committed suicide with a Scorpion SA Vz 61 submachine gun cal. 7.65 mm Browning from former Czechoslovakia.     

Suicide with multiple graze shots

A 77-year-old man was found in his flat with a shot to the right temple. In spite of hospital treatment he died from the head injury the next day. The weapon at the scene used for committing the suicide was a pistol, make Kaba Special (calibre 6.35 mm). At autopsy, the right temporal region showed a surgically treated, originally stellate gunshot entrance wound with a powder cavity. Close to this penetrating gunshot wound there were 3 parallel graze shot injuries of the scalp. The autopsy findings were consistent with the assumption that all the shots had been fired by the victim himself with suicidal intent. The injury pattern is presented and discussed in relation to the results of the technical investigation of the weapon and the findings at the scene.     

Wounds caused by contact with muzzle-lift relief ports (Mag-Na-Port).

Fan-shaped stippled burns were produced on the skin when a revolver whose barrel had been modified by the Mag-Na-Port process was fired twice with the side of the muzzle in contact. A grazing wound was produced by one bullet, and an oblique entry was produced by the other. The characteristics of Mag-Na-Port wounds and test shots are described, and these are compared with test shots from two other higher power revolvers.     

Formation of a "crow's foot pattern" in the smoke residue in homicide by forehead gunshot injury

We report a "crowsfoot-like" pattern in the smoke marks around the entrance of a close-range bullet wound in the center of the forehead; the weapon in this homicide was a revolver. This pattern only occurs if the facial muscles that form expression are completely contracted at the moment the shooting occurs and if the victim expects the event. The wrinkles gather around the entrance of the bullet, and this wound pattern may indicate that the shot was expected by the victim and represent a piece of the mosaic that might help clarify the circumstances in a case.     

Firearm suicide committed using an unusual combination of tandem missiles: a bullet, a nail, and a screw

An interesting case of firearm suicide carried out using an unusual type of handmade weapon and a peculiar combination of tandem missiles is presented. A nail and a screw were placed in the rifle barrel ahead of a bullet, and all 3 were simultaneously discharged. The inflicted injury began with 1 common channel, which later split in 2 separate channels, both directed backwards and upwards; one was caused by the screw, ending in the epistropheal body, and the other, caused by the bullet and the nail, penetrated into the cranial cavity, where it bifurcated in 2 branches, one from the bullet, ending in the cerebellar tissue, and the other from the nail, penetrated through the brain stem. The established site of the entrance suicidal wound, the appearance of the weapon, and the unusual missiles are discussed with regard to the available references dealing with different types of nail injuries to the head.     

Morphology of bullet wounds when using police ammunition, type QD-P.E.P

6 years after introduction of the police ammunition QD-P.E.P. (9 mm caliber), 9 bullet wounds are presented from forensic investigations along with the results of experimental shots at pig carcasses. The evaluation reveals the characteristic pattern of such bullet wounds: a skin defect which is almost as large as the caliber and has a sharp-edged border thus looking like it has been punched out; the contusion ring ("abrasion ring") is conspicuously narrow. These findings can be explained by the shape and design of the projectile. In regular police work immediate incapacitation has not always been achieved, depending on the entry location of the bullet. Experimental shots at pig carcasses showed that in the case of shots at extremities, the residual energy of the exiting bullet may be sufficient to generate another penetrating bullet wound.     

9mm警用转轮手枪橡胶弹射入口的形态特征

目的观察橡胶弹射人口的形态特征,并探讨其法医学意义。方法使用9mm警用转轮手枪发射橡胶弹,在实验动物胸腹部侧面垂直射击,射击距离分别为紧密接触射击（0cm）,相对接触射击（1～6cm）,近距离射击（6-60cm）和远距离射击（60cm～有效射程25m）。92式手枪采取相同方式射击实验动物作为对照。观察射入口的形态特征,制作组织病理学切片,HE染色显微镜下观察。结果橡胶弹接触射击和近距离射击,射入口边缘整齐,有明显的擦拭轮、挫伤轮和火药斑纹;远距离射击,可见射人口边缘撕裂,挫伤轮明显增宽,皮下出血显著;与手枪弹射入口形态特征明显不同。结论9mm警用转轮手枪橡胶弹射入口典型的形态特征,可作为此类损伤的诊断指标。     

Suicide by a power drill

This is the report of a 62-year-old man who committed suicide by drilling through his anterior chest wall with an electric power drill. Death was caused by pericardial tamponade combined with bleeding into the pleural cavity. The skin lesion at the left hemithorax was similar to a bullet entrance wound.     

Formation of epidermal damage at entry by gunshot with a contact weapon

Examination of contact bullet wounds shows the patterned inprint of the muzzle on the skin ("stanzmark") and further ragged structures around the periphery to be the remainders of the abraded epithelium. Usually these are turned outwards and from arch-shaped intraepithelial recesses, which contain residual amounts of propellant. The damage and soiling around the point of entry are the result of two factors in combination: the combustion gases and the gases escaping between the skin surface and the front of the barrel. This leads to different amounts of skin abrasion dependent on the amount and pressure of the gases. In this way, the frequently seen difference in size and shape of the stanzmark and the muzzle front can be explained.     

Shored gunshot wound of exit. A phenomenon with identity crisis

Shored gunshot wound of exit is produced when the outstretched skin is impaled, sandwiched, and crushed between the outgoing bullet and the unyielding object over the exit site, thus leaving an abrasion collar on the wound margin. Proper coaptation of the wound margin is impossible because of the loss of skin just like those observed in entrance wounds. In contrast to the entrance wound, the supported exit wound shows a scalloped or punched-out abrasion collar and sharply contoured skin in between the radiating skin lacerations marginating the abrasion (Fig. 1). Should gunpowder be observed around the exit site, it is often unevenly distributed, and is not associated with searing, gunpowder stippled abrasion, tatooing, and deposition of soot.     

A case of external beveling with an entrance gunshot wound to the skull made by a small caliber rifle bullet.

The external beveling caused by an entrance gunshot wound to the skull has not been completely explained, but the mechanism is probably a combination of several factors including the angle of shot, twisting force of a rotating bullet, blow-back effect, velocity, shape and size of the bullet, outspread of the kinetic energy from the bullet, and resistance of the skull.     

Unusual wound morphology after textile penetration by the automatic rifle (StG) 58. A case report

Technical characteristics of the used fire-arm and ammunition, the firing range and the shot through garments of the victim are essential factors, that exercise an influence on the appearance of gunshot injuries. An exemplary case-report shall emphasize the importance of these factors. It deals with a suicidal double-shot fired from an automatic rifle by a young soldier. The wounds were localized in the left chest region and the adjacent skin was blackened by soot in a remarkable geometrical pattern, although an ammunition with a smokeless charge has been used. By means of comparative shots we have good reasons to suppose this phenomenon to be caused by rests of gun powder and pressure of the explosion gas leaved in the barrel after the first shot. The second projectile pushed out this explosion gas to the skin that had been uncovered in a star-shaped way by the first shot.     

Comparison of GSR Composition Occurring at Different Locations Around the Firing Position

Abstract: Variations in gunshot residue (GSR) compositions are used in the reconstruction of shooting incidents. In this study, GSR samples taken from seven different locations around and in the firearm were collected and analyzed using scanning electron microscopy/energy dispersive X‐ray analysis. Four different types of ammunition were applied. Very low correlations were found when different ammunition were used. This clearly shows that it is possible to differentiate between ammunition types. When the same ammunition was used, high correlations were found between samples taken from external positions (such as hands of shooter, bullet‐entrance holes) but poor correlation was found between internal samples (such as firearm barrel, cartridge case) and external samples. A high degree of association was found between samples that simulated victim and shooter. These findings clearly demonstrate that GSR comparison studies are meaningful but care needs to be taken when choosing suitable exhibits. External samples (such as hands of shooter, bullet‐entrance holes) are more suitable candidates than internal samples (barrel of the firearm, cartridge case).     

Self‐inflicted Firearm Discharge from Heating Using a Gas Burner

A male in his 70s was found lying dead in the living room of his house. A gunshot entrance wound was observed in the left orbit, with a lead slug and wadding left in the skull, which exhibited fatal cranio‐cerebral trauma. A cartridge had been discharged from a handmade launcher, or zip gun, that had been fixed to a spare gun barrel on a pipe chair, by heating the launcher from the side using a gas burner. The deceased had owned guns for hunting in the past and had returned the license, but he had retained a spare barrel and live cartridges at home. In this unique case of suicide, a zip gun was discharged by heating with a gas burner.     

Radiodense bullet wipe around osseous entrance gunshot wounds

“Bullet wipe” is the material deposited by a bullet on any surface with which it comes into contact after it is fired and may contain debris from the gun barrel, including particles of primer and metal fragments from previously fired bullets. X‐ray analysis is a non‐destructive method by which traces of metallic elements can be visually detected. The analysis of osseous defects for radiodense bullet wipe (RBW) assists in determining the presence or absence of perforating gunshot wounds, especially in fragmented, skeletonized remains. The aim of our current study was to determine the frequency of RBW around entrance firearms injuries that perforated bone. We prospectively analyzed entrance gunshot wounds for RBW over a three‐year period using digital X‐ray analysis (n = 59). We retrospectively reviewed the corresponding autopsy reports to determine the frequency of RBW by biologic sex, reported ancestry, age‐at‐death, location of wound, manner of death, range of fire, bullet caliber, and presence of bullet jacket. Data were analyzed by Fisher's exact test or Chi‐square test with significance levels accepted at p < 0.05. RBW was present in 66% (n = 39) of examined cases. Decedent characteristics did not significantly alter RBW distribution, including biologic sex (p = 0.75), reported ancestry (p = 0.49), and age‐at‐death (p = 0.43). Additionally, the location of the osseous entrance gunshot wound, manner of death, range of fire, and cartridge caliber did not affect RBW detection. All cases involving non‐jacketed rounds (n = 5) showed RBW (p = 0.30). To our knowledge, this study is the first to report the frequency of RBW detection from osseous entrance gunshot wounds.     

Suicidal gunshot to the nape from a small-bore rifle

A 55-year-old man was found dead on the bed lying on his side in a pool of blood with a bullet entrance hole in the nape. Behind his body, a semi-automatic rifle Remington Nylon, cal. .22 LR, was detected. As the gunshot entrance site was rather unusual for suicide, a forensic autopsy was performed, which showed a contact shot to the nape with the bullet path running upward to the left frontal area. The man had been treated with citalopram for delusional depression, so that a suicidal act seemed plausible, and the autopsy and criminalistic findings were also compatible with this assumption. A remarkable fact of the present case is that a long firearm had been used. Reports on suicidal shots to the nape are comparatively rare in the medicolegal literature and usually refer to pistols or revolvers.     

Postmortem Computed Tomography and Magnetic Resonance Imaging of Gunshot Wounds to the Neck

Postmortem magnetic resonance imaging (MRI) is rarely used for the radiologic assessment of gunshot injuries, although it has clear advantages over postmortem computed tomography (CT) with regard to the imaging of soft tissue injuries. Another benefit in using MRI is that lodged projectiles composed of nonferromagnetic material such as lead present only marginal metal artifacts compared with severe artifacts on CT. This case report presents CT and MRI findings in a case with two gunshot wounds to the neck: a perforating wound and a nonperforating wound with a lead bullet lodged in the cervical spine. The decedent underwent CT and MRI before the scheduled autopsy. A ring of radiopaque material under the dermis in the fatty tissue was identified at both entrance wounds on CT, which was indicative of contact shots. The perforating gunshot was clearly indicated on CT by bullet fragments along the wound channel through the perforated 6th cervical vertebra and the fractured cricoid cartilage at the exit wound. The second trajectory, however, was only assumed based on the presence of gunshot residues at the entrance wound and the position of the lodged bullet. The radiologic assessment was severely impeded by the metal artifacts on CT. Barely noticeable metal artifacts on MRI allowed for clear visualization of the soft tissue injuries and the ruptured medulla oblongata. Only MRI clarified the soft tissue injuries of the brainstem noninvasively, which could provide specific and graphic information on the rapidity of death and the incapacitation of the victim.