Improved method for shooting distance estimation. Part 1. Bullet holes in clothing items

An improved method for firing distance estimation on clothing is described. The novel part of the method includes transfer of total nitrite (nitrite ions and smokeless powder residues) from the target to an adhesive lifter. After the transfer, lead and copper deposits around the bullet entrance hole are visualized by rhodizonate and rubeanic acid, respectively. The Modified Greiss Test is carried out after alkaline hydrolysis of the smokeless powder residues on the adhesive lifter.     

Improved method for shooting distance determination. Part 2--bullet holes in objects that cannot be processed in the laboratory

An improved method for firing distance determination on exhibits that cannot be processed in the laboratory such as cars, doors, windows, or furniture is described. The novel part of the method includes transfer of total nitrite (nitrite ions and smokeless powder residues) from the target to an adhesive lifter. After the transfer, vaporous lead and copper deposits around the bullet entrance hole are visualized on the target by sodium rhodizonate and rubeanic acid, respectively. The Modified Griess Test is carried out after alkaline hydrolysis of the smokeless powder residues on the adhesive lifter.     

A novel method for extraction and analysis of gunpowder residues on double-side adhesive coated stubs

A study was conducted to develop an efficient method for extraction and analysis of gunpowder (propellant) residues from double-side adhesive coated stubs, which are used for sampling suspects or their clothing for gunshot (primer) residues (GSR). Conductive and non-conductive double-side adhesives were examined, and the analysis was carried out by gas chromatography/thermal energy analyzer (GC/TEA) and ion mobility spectrometry (IMS). The optimal procedure for the extraction, as was developed in the present study, employs two stages: (1) extraction of the stubs with a mixture of 80% v/v aqueous solution of 0.1% w/v of sodium azide and 20% v/v of ethanol employing sonication at 80 degrees C for 15 min. and (2) residues from the obtained extract were further extracted with methylene chloride. The methylene chloride phase was concentrated by evaporation prior to analysis. Extraction efficiencies of 30-90% for nitroglycerine (NG) and for 2,4-dinitro toluene (2,4-DNT) were found. No significant interferences in the analysis were observed from the adhesives or skin. Interferences were observed in the analysis by the GC/TEA of the samples collected from hair. The method enables analysis of propellant residues on a double-side adhesive coated stub after it was examined for primer residues by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX). Thus, the probative value of the evidence may be increased.     

Investigating the effect of changing ammunition on the composition of organic additives in gunshot residue (OGSR)

The measurement of the organic additives in smokeless gunpowder is an attractive approach for the detection of handgun use because it provides compositional information that can help associate residues and unfired gunpowder. We investigate several factors that will be required to advance the characterization of organic gunshot residue (OGSR) as a useful forensic tool, including evaluating residue contamination from previously fired ammunition, particle-to-particle compositional variability, and compositional features resulting from the type of firing primer used. Using ammunition loaded with known smokeless powders containing different stabilizers, a sequence of shots was fired from a .357 magnum revolver, and the muzzle exit residues were collected. Compositional analysis of the residues, both in bulk and as single particles, showed only a trace of the previously fired powder in the first shot and none in subsequent shots. In an additional experiment testing conventional leaded and the new lead-free firing primers, the OGSR composition was found not to depend on the primer type.     

A possible source of reference DNA from archived treated adhesive lifters

During the course of a double murder trial, it became apparent that the two adhesive lifters from the two cadavers had been mislabeled before being presented in court. The question was raised whether DNA testing from the biological material remaining attached to the lifters could resolve this mix-up. In fatal shooting cases where a bullet has been fired through a body surface, an adhesive lifter is applied directly to the entrance wound. The total nitrite residues, as well as biological material surrounding the wound (blood, hair, tissue) are transferred to the adhesive lifter. The nitrite residues are used for estimating firing distance. In a worst-case scenario, the biological material on the lifter may be the only remaining reference material from a victim. In this paper, we examined whether the biological material retrieved from adhesive lifters could be used for DNA typing after the lifters had been treated for GSR pattern. In as much as the biological material found on the lifters can be typed and profiled following physical and chemical treatment, we submit that archived adhesive lifters can be used as a future source of reference DNA from cadavers where no other sample is available.     

Associating gunpowder and residues from commercial ammunition using compositional analysis

Qualitatively identifying and quantitatively determining the additives in smokeless gunpowder to calculate a numerical propellant to stabilizer (P/S) ratio is a new approach to associate handgun-fired organic gunshot residues (OGSR) with unfired powder. In past work, the P/S values of handgun OGSR and cartridges loaded with known gunpowders were evaluated. In this study, gunpowder and residue samples were obtained from seven boxes of commercial 38 caliber ammunition with the goals of associating cartridges within a box and matching residues to unfired powders, based on the P/S value and the qualitative identity of the additives. Gunpowder samples from four of the seven boxes of ammunition could be easily differentiated. When visual comparisons of the cartridge powders were considered in addition to composition, powder samples from all seven boxes of ammunition could be reliably differentiated. Handgun OGSR was also collected and evaluated in bulk as well as for individual particles. In some cases, residues could be reliably differentiated based on P/S and additive identity. It was instructive to evaluate the composition of individual unfired gunpowder and OGSR particles. We determined that both the numerical centroid and dispersity of the P/S measurements provide information for associations and exclusions. Associating measurements from residue particles with those of residue samples collected from a test firing of the same weapon and ammunition appears to be a useful approach to account for any changes in composition that occur during the firing process.     

Comparing the additive composition of smokeless gunpowder and its handgun-fired residues

Detecting the use of handguns via the determination of the organic additives in smokeless gunpowder residues (OGSR) presents a promising alternative to primer metal residue analysis. Compositional analysis of the gunpowder additives nitroglycerin, diphenylamine, and ethyl centralite provides information that can associate residue samples with unfired gunpowder. We evaluated the composition of seven reloading smokeless gunpowders, both in bulk and as single particles, by ultrasonic solvent extraction/capillary electrophoresis. Handgun-fired residues obtained from three common weapon calibers loaded with the known reloading powders were compared with the unfired powders. In general, the composition of the residues was similar to that found in the unfired powders. For double-base powders, comparing the ratio of the propellant (P) to the total amount of stabilizer (S) for both residue and gunpowder samples proved to be a useful measurement for identification. This P/S ratio demonstrated that the additives in the residues did not greatly change relative to the unfired powder, providing a useful indicator to aid in forensic powder and residue evaluation.     

Developing a quantitative extraction technique for determining the organic additives in smokeless handgun powder.

Compositional analysis of the organic additives in smokeless handgun powder can provide forensic information to associate known and questioned samples. A reliable method for the quantitative extraction of smokeless powder additives would strengthen these measurements. To achieve quantitative recovery, both supercritical fluid extraction (SFE) and ultrasonic solvent extraction (USE) were evaluated as candidate techniques. Following a detailed evaluation of the solvent choice, the recovery of spiked additive compounds, and the effect of the powder matrix, a reliable USE technique was developed. When quantitative USE recovery of the target analytes, nitroglycerin (NG), diphenylamine (DPA), and ethyl centralite (EC), is coupled with additive measurement by micellar capillary electrophoresis (CE), compositional information can be obtained in less than 1 h.     

Analysis of Explosives by GC‐UV

A mixture of explosives was analyzed by gas chromatography (GC) linked to ultraviolet (UV) spectrophotometry that enabled detection in the range of 178–330 nm. The gas‐phase UV spectra of 2,4,6‐trinitrotoluene (TNT), 2,4‐dinitrotoluene (DNT), ethylene glycol dinitrate (EGDN), glycerine trinitrate (NG, nitroglycerine), triacetone triperoxide (TATP), and pentaerythritol tetranitrate (PETN) were successfully recorded. The most interesting aspect of the current application is that it enabled simultaneous detection of both the target analyte and its decomposition products. At suitable elevated temperatures of the transfer line between the GC instrument and the UV detector, a partial decomposition was accomplished. Detection was made in real time and resulted in overlaid spectra of the mother compound and its decomposition product. Hence, the presented approach added another level to the qualitative identification of the explosives in comparison with traditional methods that relies only on the detection of the target analyte. As expected, the decomposition product of EGDN, NG, and PETN was NO, while TATP degraded to acetone. DNT and TNT did not exhibit any decomposition at the temperatures used.     

Improved method for shooting distance estimation. Part III. Bullet holes in cadavers

An improved method to estimate firing distance on human body surfaces is described. The novel part of the method includes a chemical test in addition to the traditional visual and microscopic examinations of the gunshot wounds. This chemical test consists of a transfer of the gunpowder residues from the area of a gunshot wound to an adhesive lifter; the residues are then visualized as total nitrite after alkaline hydrolysis by the Modified Griess Test (MGT). When cadavers are in an advanced stage of decomposition or when gunshot wounds are in hairy areas, the information obtained by this chemical test can be crucial for shooting distance evaluation. In other cases it may improve the accuracy of the examination. In some cases, the results obtained by this test may assist in the discrimination between entrance and exit gunshot wounds.     

Some Examples of Applications of a Microthermal Desorption Device in the Forensic Laboratory

Abstract:  Several applications of a microthermal desorption device for analysis of small forensic samples are presented. The method uses a solid phase microextraction holder with the fiber removed. In addition to samples of inks on paper, this device was successfully used for analysis of toners, various stains on bank notes, and lipstick stains on paper. Other small items encountered in a forensic science laboratory were also analyzed: particles of smokeless powder, particles of coffee, and automotive clear topcoat layer. The desorbed compounds were analyzed by gas chromatography with a flame ionization detector or by gas chromatography–mass spectrometry. This device can be used in connection with any kind of gas chromatograph. By selection of different injector temperatures, fractionated thermal desorption of samples is achieved. The procedure was demonstrated on samples of ballpoint pen ink of various age.     

Mobile phase influence on electrospray ionization for the analysis of smokeless powders by gradient reversed phase high-performance liquid chromatography-ESIMS

The solution parameters associated with gradient elution reversed phase high-performance liquid chromatography (HPLC) were characterized by evaluating the electrospray ionization mass spectrometry (ESIMS) response of selected smokeless powder additives. Using direct liquid infusion, the positive ion ESIMS responses were determined for three general classes of powder constituents: dialkylphthalate acid esters, N,N'-dialkyl-N,N'-diphenyl urea based stabilizers and nitroso-, nitro-, and dinitro- derivatives of diphenylamine. The relative ESIMS intensities of the powder components were investigated as a function of three solution parameters: ammonium acetate concentration, pH, and percent methanol. The effect of the ammonium acetate concentration demonstrates that the electrolyte is required for efficient ionization and the ESIMS intensity was optimal at a concentration of 2mM for the selected compounds, except 2,4'-dinitrodiphenylamine. The aqueous solution pH, corresponding to the available protons in solution, did not have a significant effect on the ESIMS intensity of the analytes. The percent methanol was evaluated with both decreasing and constant electrolyte concentrations to demonstrate the effects of droplet stability and ion transfer into the gas phase. These findings were applied to the analysis of the selected smokeless powder additives using HPLC-ESIMS to illustrate increased sensitivity for the protonated molecules.     

Optimization of Headspace Solid‐Phase Microextraction Technique for Extraction of Volatile Smokeless Powder Compounds in Forensic Applications

Smokeless powders are low explosives and are potentially found in cases involving firearms and improvised explosive devices. Apart from inorganic compound analysis, forensic determination of organic components of these materials appears as a promising alternative, especially the chromatographic techniques. This work describes the optimization of a solid‐phase microextraction technique using an 85 μm polyacrylate fiber followed by gas chromatography‐flame ionization detection for smokeless powder. A multivariate experimental design was performed to optimize extraction‐influencing parameters. A 2⁴ factorial first‐order design revealed that sample temperature and extraction time were the major influencing parameters. Doehlert matrix design has subsequently selected 66°C and 21 min as the compromised conditions for the two predetermined parameters. This extraction technique has successfully detected the headspace compounds of smokeless powders from different ammunition types and allowed for their differentiation. The novel technique allows more rapid sample preparation for chromatographic detection of smokeless powders.     

A qualitative comparison of smokeless powder measurements

In the spring of 2000, the National Institute of Standards and Technology and nineteen participants conducted a comparison of smokeless powder additive compositional measurements. The purpose of this exercise was to determine the state-of-the-practice for forensic smokeless powder determinations. For the comparison, two handgun reloading powder samples were mixed and were compositionally evaluated for homogeneity by NIST. Participant laboratories included military, academic, and state/local, federal, and international forensic agencies. We solicited qualitative data identifying nitroglycerin, diphenylamine, N-nitrosodiphenylamine, and ethyl centralite. In addition, some laboratories provided identification of additional ingredients, such as nitrocellulose, or reported other measurements, such as dimensional morphology. In this paper, laboratory identification of the smokeless powder additives and a summary of the measurement methods used for the evaluations are presented. All laboratories correctly identified NG and the major stabilizers. Some disparity between laboratories was noted for the identification of minor (<0.01% by weight) stabilizers and stabilizer decomposition products.     

A reported case involving impaired driving following self-administration of xylazine

A case of suspected drug-impaired driving involving self-administration of xylazine (Xyla-Ject), a veterinary tranquilizing agent, and paroxetine is presented. Qualitative and quantitative analysis of xylazine and paroxetine were performed by gas chromatography with a flame-ionization detector (GC-FID) and gas chromatography/mass spectrometry (GC/MS). Whole blood xylazine and paroxetine concentrations were 0.57 and 0.02 microg/ml, respectively.     

Removing interfering contaminations from gelatin lifters

Gelatin lifter is widely used for recovering shoeprints from crime scenes. Dusty shoeprints removed from paper with loose fibers, cloth or plasterboard, might be concealed by the detached fibers. A novel technique to clean the gelatin lifter from the interfering contaminations, using adhesive lifters, was developed. The adhesive lifter is applied directly on the surface of the gelatin lifter, and is removed instantly. The adhesive lifter removes the upper layer of the attached material on the gelatin lifter. After removing the concealing material from the hidden imprint, the quality of the visualized imprint is improved. The cleaning process can be applied as many times as needed and the optimum number is different for each substrate. The small dust particles comprising the shoeprint remained attached to the sticky side of the gelatin lifter even though the adhesion force applied by the adhesive lifter is great. Repeating the procedure too many times could harm the quality of the print severely, yet the advantages of this method are greater than the risks of relocation of image quality reduction.     

Vacuum collection of gunpowder residues from clothing worn by shooting suspects, and their analysis by GC/TEA, IMS, and GC/MS

Experiments were conducted to collect gunpowder (propellant) residues from shooters' clothing by vacuum and to analyze them by gas chromatography/thermal energy analyzer (GC/TEA), ion mobility spectrometry (IMS), and gas chromatography/mass spectrometry (GC/MS). The residues were collected on fiberglass and Teflon filters using the portable vacuum sampler, all supplied with the IMS instrument. Several solvents were examined for the extraction of the propellant components from the filters. The extracts were centrifuged and/or filtered, concentrated by evaporation, and analyzed without any additional clean-up procedure. Based on the results of the study, an operational method for analysis of gunpowder residues was introduced into casework without changing the present operational technique for gunshot (primer) residue (GSR) analysis on clothing implemented by the Israel Police. In the modified method, the clothing is first sampled by double-side adhesive-coated aluminum stubs (the tape-lift method) for GSR analysis (the existing method), followed by vacuum collection for propellant residue examination. The issue of interpretation of the analytical results is discussed.     

海洛因毒品中残留有机溶剂的检测方法与结果分析

目的建立固体海洛因毒品中残留有机溶剂的顶空-气相色谱和顶空-气相色谱-质谱联用检测方法。方法采用干法和湿法处理42份样品,密封后90℃加热振荡20min,抽取顶空气体用气相色谱法（DB-WAX毛细柱,30m×0.25mm,0.25μm）和气相色谱-质谱联用法（HP-5MS毛细柱,30m×0.25mm,0.25μm）检测,以已知17种有机溶剂外标法定性。在样品中加水后检测,根据峰高估算5种共有成分的含量。结果在42份海洛因毒品中检出乙酸、乙醚、乙醇、乙酸乙酯、乙醛、三氯甲烷等12种有机溶剂成分,5种主要共有成分相对含量有差别。结论本研究建立的检测方法快速、简便,定性可靠,可用于固体海洛因毒品的来源与批次分析。     

二氯丙基酯化-气相色谱法分析葡萄叶中3种除草剂

目的建立葡萄叶中2甲4氯、2,4-滴和2,4-滴丙酸3种苯氧羧酸类除草剂的二氯丙基酯化-电子俘获检测气相色谱分析法。方法样品捣碎、添加内标2,4-二氯苯乙酸、酸化、用乙醚提取,提取液用液液分配法净化,净化后挥干有机溶液,用硫酸和1,3-二氯丙-2-醇进行酯化,生成的酯进行气相色谱分析。结果葡萄叶中2甲4氯、2,4-滴和2,4-滴丙酸的检测限分别为20ng/g、20ng/g和30ng/g,葡萄叶中除草剂浓度100~1000 ng/g成线性关系,空白葡萄叶中添加2甲4氯、2,4-滴和2,4-滴丙酸200ng/g的平均回收率分别为98.8%、101.3%和103.1%,回收率的变异系数分别为11.4%、11.0%和9.3%。结论本文方法检测被毒害的葡萄叶中3种除草剂是灵敏和准确的。     

Gases released from tissue and analyzed by infrared and gas chromatography/mass spectroscopy techniques

Two techniques for analyzing contaminants released as gases from postmortem tissues were described and compared. One technique used gas chromatography/mass spectrometry (GC/MS); the other, infrared spectroscopy (IR). Brain, lung, liver, blood and urine specimens were obtained from suspected drug-overdose victims whose deaths were contributed to or caused by inhalation of unknown gases or vapors during the period immediately preceding death. Gases from the postmortem tissues and liquid samples were separately admitted into an evacuated IR gas cell, the IR spectra recorded, and gas samples then removed for GC/MS analysis. Nitrous oxide, glue, and paint solvent constituents were identified and measured. Only the brain and lung tissues contained measurable amounts of inhalants. Both IR and GC/MS methods were adequate for normal confirmatory analyses; the GC/MS system was judged superior for fast routine efforts normally hampered by incomplete sample history.