Radiopaque Images Resembling Obturated Root Canals,

The practice of endodontics, while not as common as today, was performed during the WWII era. Some of the materials used to fill canals during this time period include gutta‐percha, calcium hydroxide, gold foil, and silver points. In this case study, fissures and fractures were present on the exposed root surfaces of the dental remains. Radiographs of the dental remains revealed canal systems similar to those obturated with a paste or semi‐solid material. The root surface defects appear to be the access point for the radiopaque material. As demonstrated in the case presentation, the radiographic image suggestive of a treated canal may easily mislead the analyst. The analyst should be suspicious of a radiopaque artifact if no evidence of access is apparent and fissures/fractures are present on the root surfaces. The defects in the tooth structure may possibly be explained by the exposure to a wet or damp environment.     

A Comparison of US and Japanese Dental Restorative Care Present on Service Members Recovered from the WWII Era

The documentation of dental materials used in the USA during the WWII era is readily available, while references for the Japanese are minimal. It was therefore important to build a photographic database of Japanese restorative care which could be utilized as a comparison tool for the deployed odontologist. The dental restorative care of approximately 400 US and 100 Japanese sets of remains was evaluated. Both countries share many similar restorative techniques to include collared crowns, full‐coverage restorations, cantilever bridge/pontics to close spaces; restorative materials such as amalgam, gold, and zinc phosphate (temporary) restorations; and removable prostheses. The dental restorative materials most commonly used by US dentists include the amalgam and silicate cement, while the full‐coverage crown was the type of restoration most frequently seen on the Japanese remains. Silicates, porcelain and replaceable crowns, and partial‐coverage prepared crowns were not observed on the recovered Japanese remains.     

Forensic or Archaeological Issue: Is Chemical Analysis of Dental Restorations Helpful in Assessing Time Since Death and Identification of Skeletonized Human Remains?

In 2011, small mass grave with completely skeletonized remains was discovered in Belgrade suburb. An eyewitness claimed that skeletons belonged to German soldiers killed in WWII. Anthropologists were engaged to investigate whether the skeletal remains correspond to the indicated German group or represent more recent case requiring court trial. Numerous dental restorations were noticed. Owing to the fact that different dental materials were used in dental practice at certain times, the aim of this study was to explore whether analysis of dental restorations could help in identification and estimation of time since death. Inductively coupled plasma optical emission spectrometry revealed that dental fillings corresponded to copper amalgam, conventional silver amalgam, silicophosphate cement, and zinc phosphate cement. Chemical results combined with anthropological and historical facts suggest that the individuals lived before the 1960s in country with well‐developed dental service at that time. Therefore, chemical analysis of dental fillings was useful to distinguish between skeletal remains that are too old to be of forensic interest and the remains relevant to legal investigations.     

Dental CT imaging as a screening tool for dental profiling: advantages and limitations

The use of dental processing software for computed tomography (CT) data (Dentascan) is described on postmortem (pm) CT data for the purpose of pm identification. The software allows reconstructing reformatted images comparable to conventional panoramic dental radiographs by defining a curved reconstruction line along the teeth on oblique images. Three corpses that have been scanned within the virtopsy project were used to test the software for the purpose of dental identification. In every case, dental panoramic images could be reconstructed and compared to antemortem radiographs. The images showed the basic component of teeth (enamel, dentin, and pulp), the anatomic structure of the alveolar bone, missing or unerupted teeth as well as restorations of the teeth that could be used for identification. When streak artifacts due to metal-containing dental work reduced image quality, it was still necessary to perform pm conventional radiographs for comparison of the detailed shape of the restoration. Dental identification or a dental profiling seems to become possible in a noninvasive manner using the Dentascan software.     

A Comparison of Dental Chartings Performed at the Joint POW/MIA Accounting Command Central Identification Laboratory and the Kokura Central Identification Unit on Remains Identified from the Korean War

During the Korean War, the Office of the Quartermaster General's Graves Registration Service (GRS) was responsible for the recovery, processing, identification, and repatriation of US remains. In January 1951, the GRS established a Central Identification Unit (CIU) at Kokura, Japan. At the Kokura CIU, postmortem dental examinations were performed by the dental technicians. Thirty‐nine postmortem dental examinations performed at the CIU were compared to the findings documented in the Forensic Odontology Reports written at the JPAC Central Identification Laboratory (CIL). Differences were noted in 20 comparisons (51%). The majority of the discrepancies was considered negligible and would not alter the JPAC decision to disinter a set of unknown remains. Charting discrepancies that were considered significant included the occasional failure of the Kokura technicians to identify teeth with inter‐proximal or esthetic restorations and the misidentification of a mechanically prepared tooth (i.e., tooth prepared for a restoration) as a carious surface.     

The Analysis of a World War I U.S. Service Member's Dental Remains Recovered in France

In October 2009, the grave of an unknown World War I (WWI) U.S. service member was exhumed in Rembercourt‐Sur‐Mad Village, in the Lorraine Region of France. The skeletal remains and material evidence were accessioned into the Joint POW/MIA Accounting Command's (JPAC) Central Identification Laboratory (CIL). The personnel records for the associated casualty were requested, received, and reviewed. A dental profile was present among the service member's personal information. There were multiple points of concordance between the dental records of the associated casualty, and the recovered dental remains to include eight restored teeth, 15 unrestored teeth, and three antemortem missing teeth. Distinctive restorations which compared favorably included a porcelain crown and multiple gold foil fillings. All lines of evidence (historical, material evidence/personal effects, anthropological, and dental) and the circumstances of loss compared positively with the associated casualty. On April 1, 2010, the previously unaccounted‐for U.S. service member was positively identified and on June 23, 2010, was buried with full military honors at Arlington National Cemetery.     

Forensic identification value of roentgen images in determining tooth-colored dental filling materials]

Identification of unknown bodies is mainly made by dental examination and comparison with accurate dental records. Therefore it is necessary to examine the jaws carefully and to locate every tooth-coloured dental restoration. Overlooking dental fillings can make positive identification impossible. The paper presented here evaluates the usefulness of radiographs to locate tooth coloured dental restorations. RESULTS: 40% of the dental materials tested here could not be detected radiographically with a sensitivity that is demanded. A radiographic examination is not sufficient and must be supplied by other techniques.     

Validation of X-ray fluorescence spectrometry for determining osseous or dental origin of unknown material

Forensic anthropological examinations typically involve the analysis of human skeletal remains, but in cases where samples are very small and/or physically compromised, it may first be necessary to determine whether the material is even osseous or dental in origin. X-ray fluorescence spectrometry (XRF) is a technique that reveals the elemental composition of materials and is hypothesized to have utility in such cases. XRF analysis was conducted on a variety of tissues and materials in unaltered and altered (damaged) states. With few exceptions, osseous and dental tissues in unaltered and altered conditions contained characteristic levels of calcium and phosphorus, while other materials did not. Materials could be accurately identified as osseous or dental in origin based on the calcium and phosphorus levels identified by XRF, and we therefore conclude that XRF analysis is a valid and effective means of determining osseous or dental origin of unknown material.     

Forensic dental training in the dental school curriculum

This article reviews the literature regarding forensic education in the dental school curriculum and describes an exercise in forensic identification of victims of a mass casualty. Radiographs were made of dentate human cadavers in the gross anatomy laboratory at the Southern Illinois School of Dental Medicine. The jaws were then removed to provide "wet specimens" for the exercise. Several restorations were performed on the cadaver teeth, after which radiographs of the dissected jaws were made. One author wrote up mock dental records for each of the victims. These records included the first set or "premortem" radiographs. Students participating in the exercise were provided with a plane crash scenario, the dental records of the passengers on the manifest, the dissected jaws, and the second set or "postmortem" radiographs. Students were expected to form three teams. The first two teams evaluated the ante-mortem and postmortem dental records. The third team compared the ante-mortem and postmortem records to arrive at identification. The purpose of the exercise was twofold. It introduced dental students to forensic dentistry and emphasized the need for complete and accurate record keeping in the dental office. Several factors lessened the realism of the exercise and made it difficult to reproduce in the future. These included the uniformity of the dental records and the destruction of cadaver material following the exercise.     

Identification through X-ray fluorescence analysis of dental restorative resin materials: a comprehensive study of noncremated, cremated, and processed-cremated individuals

Tooth-colored restorative materials are increasingly being placed in the practice of modern dentistry, replacing traditional materials such as amalgam. Many restorative resins have distinct elemental compositions that allow identification of brand. Not only are resins classifiable by elemental content, but they also survive extreme conditions such as cremation. This is of significance to the forensic odontologist because resin uniqueness adds another level of certainty in victim identification, especially when traditional means are exhausted. In this three-part study, unique combinations of resins were placed in six human cadavers (total 70 restorations). Simulated ante-mortem dental records were created. In a blind experiment, a portable X-ray fluorescence (XRF) unit was used to locate and identify the resin brands placed in the dentition. The technique was successful in location and brand identification of 53 of the restorations, which was sufficient to enable positive victim identification among the study group. This part of the experiment demonstrated the utility of portable XRF in detection and analysis of restorative materials for victim identification in field or morgue settings. Identification of individuals after cremation is a more difficult task, as the dentition is altered by shrinkage and fragmentation, and may not be comparable with a dental chart. Identification of processed cremains is a much greater challenge, as comminution obliterates all structural relationships. Under both circumstances, it is the nonbiological artifacts that aid in identification. Restorative resin fillings can survive these conditions, and can still be named by brand utilizing elemental analysis. In a continuation of the study, the cadavers were cremated in a cremation retort under standard mortuary conditions. XRF was again used to analyze retrieved resins and to identify the individuals based on restorative materials known to exist from dental records. The cremains were then processed and the analysis was repeated to determine whether restorative resins could be found under this extreme condition. Under both circumstances, sufficient surviving resin material was found to distinguish positively each individual in the study group. This study showed the utility of XRF as an analytical tool for forensic odontology and also the significance of the role of restorative resins in victim identification, even after cremation.     

Reconstruction of root morphology in skeletonized remains with postmortem dental loss.

A reversible technique is presented in which the root morphology of missing teeth in skeletonized human remains can be reconstructed for the purpose of radiographic comparison and postmortem identification. In this technique, which is based upon pilot studies with skeletonized mandibles of archival remains, the alveolar socket walls are sealed with a coat of cyanoacrylate cement and injected with a mixture of vinyl polysiloxane and barium sulfate. Radiographs are produced with the radiopaque mixture in place, which highlights the antemortem morphology of the roots. Subsequently, the impression material is removed, resulting in no gross alteration of the evidence. The radiographs made with this technique, as well as the impressions, can be stored for later use at a trial or pending the discovery of antemortem dental evidence.     

Can dentists recognize their own work? The forensic implications

After 10 months, 71.4% of a group of dental students were able to recognize amalgam restorations that they had placed in the mouths of manikins. After 24 months, 57.1% of the group were able to recognize their work again. In contrast, only 5.5% of a second group of students, who did not have the interim viewing at 10 months, could recognize their work at 24 months. These results suggest that, with time, dental operators lose the ability to recognize their work but that this ability is prolonged by interim observations of the work. This study underscores the need for dentists to chart and record accurately any artifacts introduced into the patient's mouth, as well as any features that would make the patient unique upon forensic examination.     

Dental characteristics of a large military population useful for identification

The number and complexity of dental restorations has decreased for younger Americans. Since the presence and extent of restorations are important data for forensic science identification purposes, the Computer-Assisted Postmortem Identification (CAPMI) system was used to assess the practical effect of the decreased selectivity expected as a result of improved dental health. Dental examination data from 7030 soldiers were recorded on optical mark read forms and entered into a database. The data were reorganized and analyzed to generate summary statistics about the incidence of each type of restoration (divided into 16 categories) for both anterior, posterior, upper, lower, and combined segments. Patients' ages ranged from 17 to 49 with a mean of 24 years 5 months. Sixty percent were from 18 to 25 years old. A characteristic is defined as any situation other than a virgin tooth; for example, extracted, missing, unerupted, or restored. The average subject had 7 dental characteristics with approximately 75% having 4 or more. Within the entire population, 9% had 32 unrestored teeth. 3.6% had only one characteristic. To test the selectivity and uniqueness of various combinations of dental characteristics, 363 simulations using the CAPMI system were made against the entire 7030 subject database. Sample records (33 per group) with 2, 3, 4, 5, 6, 7, 8, 9-11, 12-14, 15-18, and 19+ characteristics were chosen at random from the database and searches were made.(ABSTRACT TRUNCATED AT 250 WORDS)     

Detection of Tooth‐Colored Restorative Materials for Forensic Purposes Based on Their Optical Properties: An In Vitro Comparative Study

Victim identification using dental records involves antemortem and postmortem comparison of dental charts. Since dental restorations may be part of such records, identifying them accurately is critical. The objective of this study was to compare the diagnostic reliability and validity of two optical methods for identifying tooth‐colored restorations (digital imaging fiber optic transillumination (DiFOTI) using near infrared light, and fluorescence‐aided identification of restorations (FAIR)) with conventional diagnostic methods. Four examiners identified and charted tooth‐colored restorations in three sets of typodonts on the bench using conventional visual and tactile examination, DiFOTI (DIAGNOcam?) and FAIR. All examinations were repeated after 4 weeks. Both the sensitivity (95%) and specificity (97%) of the FAIR method were significantly higher than those for DiFOTI (82% and 82%) and for conventional inspection (71% and 82%). In conclusion, FAIR method performed better than conventional examination and DiFOTI, and was more reliable for identifying tooth‐colored restorations.     

Postmortem dental radiography

Comparison of postmortem and antemortem dental radiographic films or digital images is a common procedure for establishing identity of human remains. This article describes some problems with producing postmortem dental radiographs in a medical examiner setting and gives methods for circumventing these difficulties. Resection of the jaws, when permitted, significantly simplifies the postmortem radiographic technique. When producing an actual postmortem panoramic dental radiograph (orthopantomogram) from a dry skull, stabilization of the specimen for exposure by the moving beam source may be accomplished simply by placing the specimen upside down on an anthropologist's skull ring. Image "burnout" in the anterior segment, which results from absence of the tissues of the neck, may be avoided by appropriate placement of radiodense objects such as "zippered" plastic bags filled with water or other fluid material, freezer gel packs, or a block of self-polymerizing acrylic. These methods may increase future postmortem dental radiography efficiency.     

Self-assessment of the forensic value of dental records.

One of the most important aspects of a person's dental record may well prove to be it's potential value should the forensic dental identification of their remains become necessary. The better the quality of the antemortem dental records, the easier and faster the identification of the remains will be. The forensic dentist must be able to select identifying features by decoding the deceased's antemortem dental records. A study was conducted on two groups of dentists who were asked to self-assess the forensic dental value of the dental records maintained in their own practices. The three most frequently recorded identifying dental features, other than caries and restorations, were the presence of diastemas, displaced or rotated teeth, and dental anomalies. Surveyed dentists imbedded identifying information into the removable prosthetic devices fabricated for their patients an average of only 64% of the time. Only 56% of the two groups combined felt that their dental chartings and written records would be extremely useful in dental identifications. It is concluded that the quality of antemortem dental records available for comparison to postmortem remains varies from inadequate to extremely useful. Practicing dentists can become valuable members of the dental identification process by developing and maintaining standards of record keeping which would be valuable in restoring their patients' identity.     

The use of quantitative light-induced fluorescence (QLF) to identify composite restorations in forensic examinations

There has been a large increase in the number of tooth colored restorations "white fillings" placed in recent years. An increased demand from the public for more aesthetic dental restorations causes a potential problem for forensic dentists who may find the fillings difficult to identify and hence include in postmortem odontograms. This has implications for the accuracy of dental identifications, particularly in situations where limited time is available for postmortem identification, e.g., mass casualty incidents. A new method for the detection of composite restorations is presented. Quantitative Light-induced Fluorescence (QLF) is a technique currently employed to detect small changes in enamel mineral content. An experiment was conducted to determine if the technique would afford a greater degree of contrast between composite and enamel and thus enable the accuracy of composite identification in enamel. Twenty-four previously extracted human premolars were gently cleaned with pumice and wet-and-dry paper. Twelve were subsequently randomly selected and restored on their buccal surfaces with Spectrum (a composite) following manufacturer's instructions. No attempt was made to color match the teeth and all were filled with shade B3. Twelve teeth were left unrestored. QLF and normal white light images were taken of both restored and non-restored surfaces with teeth wet and then dried. Ten forensic dentists were asked on two separate occasions (one month between each attempt) to indicate whether or not they thought the surface was: a) restored or b) unrestored. Results indicate that forensic dentists detected a significantly higher proportion (p<0.005) of filled surfaces with QLF.     

Radiographic evaluation of teeth subjected to high temperatures: experimental study to aid identification processes

The radiographic evaluation of dental remains represents a significant aspect in the forensic identification process, particularly after an exposure to fire. The aim of this "in vitro" study was to evaluate the radiographic features of unrestored, endodontically treated and restored teeth after exposure to an experimental range of high temperatures. Ninety human teeth were divided into two groups: (1) unrestored teeth, as a control group and (2) teeth endodontically treated (condensation technique) and restored with amalgam or composite fillings. Before testing the high temperatures, periapical radiographs of all teeth were performed. The tests of exposure to heat were carried out in an oven for six different temperatures (200, 400, 600, 800, 1000 and 1100 degrees C (392, 752, 1112, 1472, 1832, 2012 degrees F)). After each exposure, periapical radiographs of all the teeth were taken. The radiographic appearance of all the teeth before and after the thermal stresses were evaluated and the differences were recorded. The results of the radiographic examination showed that a number of significant radiographic details were conserved: the composite fillings were in place maintaining the shape till 600 degrees C (1112 degrees F), the amalgam fillings were in place maintaining the shape till 1000 degrees C (1832 degrees F) and the endodontic treatments were recognisable till 1100 degrees C (2012 degrees F).     

A Simple Computer‐assisted Quantification of Contrast in a Fingerprint

A simple method for quantification of contrast in a fingerprint is proposed. Contrast is defined as the average difference in intensity of pixels between valleys and ridges in a fingerprint. It is quantified from a scanner‐acquired image of the fingerprint using a histogram function of Adobe Photoshop. The method was validated with black inked prints and marks developed with aluminum powder. Moreover, we tested resistance of the method to rater‐dependent errors and dependence of the measurements on the resolution of an image and the model of the scanner. For both groups of fingerprints, the method gave coherent and easily interpretable quantitative values for contrast. There were no significant differences between measurements performed by different raters and by the same rater in a test–retest procedure. However, the method was found to be instrument dependent, as measurements were significantly affected by image resolution and the model of the scanner.     

A metric method for sex determination using the proximal femur and fragmentary hipbone

The pubic bone is considered one of the best sources of information for determining sex using skeletal remains, but can be easily damaged postmortem. This problem has led to the development of nonpelvic methods for cases when the pubic bone is too damaged for analysis. We approached this problem from a different perspective. In this article, we present an approach using new measurements and angles of the proximal femur to recreate the variation in the pubic bone. With a sample from the Terry Collection (n > 300), we use these new variables along with other traditional measurements of the femur and hipbone to develop two logistic regression equations (femur and fragmentary hipbone, and femur only) that are not population specific. Tests on an independent sample (Grant Collection; n = 37-40) with a different pattern of sexual dimorphism resulted in an allocation accuracy of 95-97% with minimal difference by sex.