Provenance determination of oriental porcelain using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS)

The sale of fraudulent oriental ceramics constitutes a large proportion of the illegal artifact and antique trade and threatens to undermine the legitimate international market. The sophistication and skill of forgers has reached a level where, using traditional appraisal by eye and hand, even the most experienced specialist is often unable to distinguish between a genuine and fraudulent piece. In addition, current provenancing techniques such as energy-dispersive X-ray fluorescence (EDXRF) spectrometry and thermoluminescence (TL) dating can result in significant damage to the artifact itself. Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), a relatively nondestructive analytical technique, has been used for the provenance determination of materials based on geographical origin. The technique requires the production of a laser crater, c. 100 microm in diameter, which is essentially invisible to the naked eye. Debris from this crater is analyzed using ICP-MS, with the results forming the basis of the provenance establishment protocol. Chinese, Japanese, and English porcelain shards have been analyzed using this protocol and generic isotopic distribution patterns have been produced that enable the provenance establishment of porcelain artifacts to their country of production. Minor variations between elemental fingerprints of artifacts produced in the same country also indicate that it may be possible to further provenance oriental ceramics to a specific production region or kiln site.     

Elemental Analysis of Variably Contaminated Cremains Using X‐ray Fluorescence Spectrometry

Analyzing and identifying skeletal remains becomes increasingly difficult when remains have been cremated, especially in cases where the cremated material may have been intentionally contaminated with nonskeletal material. This study examined the potential of X‐ray fluorescence spectrometry (XRF) to detect the presence of nonskeletal contaminants in samples of cremains. Eleven samples of cremains were variably combined with concrete mix and analyzed using XRF. Photon counts of elements in each sample were analyzed, and the coefficient of determination (R²) using unweighted linear regression as a function of percent cremains was calculated. Results showed that with changes in the proportion of skeletal material and contaminant, there were significant (R² > 0.90) changes in detected levels of phosphorus, potassium, zinc, aluminum, and sulfur. The use of XRF is concluded to be a valid approach in the identification of the presence of nonskeletal material in potentially contaminated cremains.     

Multimethod Resolution of a Small‐Scale Case of Commingling

This study highlights the use of multiple methods for resolving a case of commingled human remains. Skeletal remains were located in a marijuana field in rural northern California by law enforcement. Although initially buried in shallow graves, the remains of two decedents were disturbed by large carnivores and scattered over a wide area. The remains were submitted by law enforcement for forensic anthropological analysis and resolution of commingling. To segregate the remains of the two individuals, a number of methods were employed, including: (i) physical matching of fragmented remains; (ii) articulation to evaluate joint congruence; (iii) visual pair‐matching of bilateral elements; (iv) osteometric pair‐matching; (v) evaluation of taphonomic patterns; (vi) DNA analysis; and (vii) portable X‐ray spectrometry (pXRF). This multimethod approach resulted in accurate resolution of the commingling and facilitated reconstruction of the biological profiles, taphonomic patterns, and trauma analysis for each individual.     

Public Art as a Tool for Environmental Outreach: Insights on the Challenges of Implementation

Artistic works can be utilized in an environmental-focused educational capacity, particularly when installed in the public realm. While some research on “ecological art” has been conducted in other countries, little attention has been paid to its application in Canada. This article addresses insights derived from in-depth interviews with members of three not-for-profit art organizations in the City of Toronto that are engaged in producing public artworks intended to provoke thought about the environment. Our findings reveal three key impediments to the application of public art as a tool for environmental outreach.     

Practical Considerations in Trace Element Analysis of Bone by Portable X‐ray Fluorescence

Forensic anthropologists are more often turning to nondestructive methods to assist with skeletal analyses, specifically for trace elemental analyses. Portable XRF (pXRF) instruments are versatile and are able to be used in diverse settings or for specimens of a shape and size that cannot be accommodated by laboratory‐based instruments. Use of XRF requires knowledge of analysis parameters such as X‐ray penetration and exit depth. Analysis depth was determined by examining pure elements through known thicknesses of equine bone slices. Correlation between the element's X‐ray emission energy and the depth of reading was observed. Bone surfaces from a small unknown historic cemetery were analyzed before and after sanding of the periosteal surface to observe possible changes in XRF readings based on potential diagenesis. Results validate the pXRF device as a powerful and convenient instrument for nondestructive analysis, while highlighting limitations and considerations for the analysis of osseous materials.     

论实用艺术作品的著作权保护

实用艺术作品兼具实用性、艺术性、独创性和可复制性并且符合作品的构成要件,然而我国现行著作权法却不能对实用艺术作品提供充分有效的知识产权保护,其中的相关规定反而造成本国实用艺术作品与伯尔尼公约成员国作品“双重待遇”的尴尬局面。本文认为,我国著作权立法应当对美术作品进行狭义界定,将实用艺术作品与之并列纳入著作权法的保护范围,并对其提供著作权加专利权的双重保护模式。     

X‐ray Scattering Evaluation of Ultrastructural Changes in Human Dental Tissues with Thermal Treatment

Micro‐ and ultrastructural analysis of burned skeletal remains is crucial for obtaining a reliable estimation of cremation temperature. Earlier studies mainly focused on heat‐induced changes in bone tissue, while this study extends this research to human dental tissues using a novel quantitative analytical approach. Twelve tooth sections were burned at 400–900°C (30‐min exposure, increments of 100°C). Subsequent combined small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) experiments were performed at the Diamond Light Source synchrotron facility, where 28 scattering patterns were collected within each tooth section. In comparison with the control sample, an increase in mean crystal thickness was found in burned dentine (2.8‐fold) and enamel (1.4‐fold), however at a smaller rate than reported earlier for bone tissue (5–10.7‐fold). The results provide a structural reference for traditional X‐ray scattering methods and emphasize the need to investigate bone and dental tissues separately to obtain a reliable estimation of cremation temperature.     

Comparison of glass fragments using particle-induced X-ray emission (PIXE) spectrometry

A procedure has been developed to analyze the trace element concentrations in glass fragments using particle-induced X-ray emission (PIXE) spectrometry. This method involves using accelerated protons to excite inner-shell electronic transitions of target atoms and recording the resultant X-rays to characterize the trace element concentrations. The protocol was able to identify those glass fragments that originated from different sources based on their elemental analyses. The protocol includes specific approaches to calculating uncertainties and handling measurements below the level of detection. The results indicate that this approach has increased sensitivity for several elements with higher atomic number compared with X-ray fluorescence methods. While not as sensitive as laser-ablation or inductively coupled plasma mass spectrometry methods of dissolved samples, it is entirely nondestructive and entails a much simpler sample preparation process that may be used to presort glass fragments for more comprehensive elemental analysis. As such, the technique described may have a niche role in forensic glass analysis.     

Forensic Comparison of Soil Samples Using Nondestructive Elemental Analysis

Soil can play an important role in forensic cases in linking suspects or objects to a crime scene by comparing samples from the crime scene with samples derived from items. This study uses an adapted ED‐XRF analysis (sieving instead of grinding to prevent destruction of microfossils) to produce elemental composition data of 20 elements. Different data processing techniques and statistical distances were evaluated using data from 50 samples and the log‐LR cost (C_llr). The best performing combination, Canberra distance, relative data, and square root values, is used to construct a discriminative model. Examples of the spatial resolution of the method in crime scenes are shown for three locations, and sampling strategy is discussed. Twelve test cases were analyzed, and results showed that the method is applicable. The study shows how the combination of an analysis technique, a database, and a discriminative model can be used to compare multiple soil samples quickly.     

Transfer and Distribution of Gunshot Residue through Glass Windows

Research into the deposition patterns of primer gunshot residue (GSR) beyond a primary target was previously nonexistent. This study aimed to determine the deposition patterns of GSR once a bullet passed through an initial target and continued on its path into additional targets. Multiple repetitions were performed to assess the GSR deposition patterns after a bullet was shot through a closed window into either a dummy or a wall within an enclosed room. Samples were taken from both the primary and secondary target holes as well as from nontarget areas. Significant amounts of GSR were found on all samples. The results show that GSR continues to be deposited along the path of the bullet after passing through a primary glass target. These findings reiterate the lack of probative value in collecting GSR samples from gunshot victims even if they are in an enclosed area separate from the shooter.     

Potential and pitfalls in establishing the provenance of Earth-related samples in forensic investigations

Earth scientists are often asked to establish or constrain the likely provenance of very small quantities of earth-related material as part of a forensic investigation. We tested the independent and collective interpretations of four experts with differing analytical skills in the prediction of sample provenance for three samples from different environmental settings. The methods used were X-ray diffraction, scanning electron microscopy, the assessment of pollen assemblages, and structural characterization of organic matter at the molecular level. Independent interpretations were less accurate than those where multiple techniques were combined. Collective interpretation was very effective in the assessment of provenance for two of the three sites where the mineralogy and plant communities were distinctive. At the other site, although the mineralogical analysis correctly identified the Triassic mudstone soil parent material, Carboniferous spores from domestic coal were initially interpreted as deriving directly from bedrock. Such an interpretation could be a common pitfall owing to anthropogenic redistribution of material such as coal.     

Validation of X-ray fluorescence spectrometry for determining osseous or dental origin of unknown material

Forensic anthropological examinations typically involve the analysis of human skeletal remains, but in cases where samples are very small and/or physically compromised, it may first be necessary to determine whether the material is even osseous or dental in origin. X-ray fluorescence spectrometry (XRF) is a technique that reveals the elemental composition of materials and is hypothesized to have utility in such cases. XRF analysis was conducted on a variety of tissues and materials in unaltered and altered (damaged) states. With few exceptions, osseous and dental tissues in unaltered and altered conditions contained characteristic levels of calcium and phosphorus, while other materials did not. Materials could be accurately identified as osseous or dental in origin based on the calcium and phosphorus levels identified by XRF, and we therefore conclude that XRF analysis is a valid and effective means of determining osseous or dental origin of unknown material.     

Infrared Spectra of U.S. Automobile Original Finishes (1998–2000). IX. Identification of Bismuth Oxychloride and Silver/White Mica Pearlescent Pigments Using Extended Range FT‐IR Spectroscopy,XRF Spectrometry,and SEM/EDS Analysis

Bismuth oxychloride (BiOCl) was the first viable synthetic pearl pigment developed 50 years ago. It was only used for a limited time period in automotive paint (model years 1998–2000), serving to produce luster for a single Chrysler black metallic color. Identification of this pigment in an unknown automotive paint can thus facilitate determination of the vehicle of origin. Bismuth oxychloride imparts effects similar to those produced by silver/white mica pearlescent pigments, and such a pigment was used together with bismuth oxychloride in at least one original equipment manufacturer (OEM) basecoat. Silver/white micas are now used primarily in white pearl tricoat systems. This article describes the identification of bismuth oxychloride and silver/white mica pearlescent pigments in automotive finishes using FT‐IR spectroscopy, X‐ray fluorescence (XRF) spectrometry, and SEM/EDS analysis. Data for some cadmium pigments, which were used in automotive paint several decades ago, are also presented as they produce infrared absorptions similar to that of bismuth oxychloride.     

Lead Theft—A Study of the “Uniqueness” of Lead from Church Roofs

In the United Kingdom, theft of lead is common, particularly from churches and other public buildings with lead roofs. To assess the potential to distinguish lead from different sources, 41 samples of lead from 24 church roofs in Northamptonshire, U.K, have been analyzed for relative abundance of trace elements and isotopes of lead using X‐ray fluorescence (XRF) and inductively coupled plasma mass spectrometry, respectively. XRF revealed the overall presence of 12 trace elements with the four most abundant, calcium, phosphorus, silicon, and sulfur, showing a large weight percentage standard error of the mean of all samples suggesting variation in the weight percentage of these elements between different church roofs. Multiple samples from the same roofs, but different lead sheets, showed much lower weight percentage standard errors of the mean suggesting similar trace element concentrations. Lead isotope ratios were similar for all samples. Factors likely to affect the occurrence of these trace elements are discussed.     

Citrate Content of Bone as a Measure of Postmortem Interval: An External Validation Study

The postmortem interval (PMI) of skeletal remains is a crucial piece of information that can help establish the time dimension in criminal cases. Unfortunately, the accurate and reliable determination of PMI from bone continues to evade forensic investigators despite concerted efforts over the past decades to develop suitable qualitative and quantitative methods. A relatively new PMI method based on the analysis of citrate content of bone was developed by Schwarcz et al. The main objective of our research was to determine whether this work could be externally validated. Thirty‐one bone samples were obtained from the Forensic Anthropology Center, University of Tennessee, Knoxville, and the Onondaga County Medical Examiner's Office. Results from analyzing samples with PMI greater than 2 years suggest that the hypothetical relationship between the citrate content of bone and PMI is much weaker than reported. It was also observed that the average absolute error between the PMI value estimated using the equation proposed by Schwarcz et al. and the actual (“true”) PMI of the sample was negative indicating an underestimation in PMI. These findings are identical to those reported by Kanz et al. Despite these results this method may still serve as a technique to sort ancient from more recent skeletal cases, after further, similar validation studies have been conducted.     

Particle size analysis of sediments, soils and related particulate materials for forensic purposes using laser granulometry

Particle size is a fundamental property of any sediment, soil or dust deposit which can provide important clues to nature and provenance. For forensic work, the particle size distribution of sometimes very small samples requires precise determination using a rapid and reliable method with a high resolution. The Coulter trade mark LS230 laser granulometer offers rapid and accurate sizing of particles in the range 0.04-2000 microm for a variety of sample types, including soils, unconsolidated sediments, dusts, powders and other particulate materials. Reliable results are possible for sample weights of just 50 mg. Discrimination between samples is performed on the basis of the shape of the particle size curves and statistical measures of the size distributions. In routine forensic work laser granulometry data can rarely be used in isolation and should be considered in combination with results from other techniques to reach an overall conclusion.     

A Rare Case of Poisoning with a Volatile Substance: Quantitative Determination of n‐Butane in Postmortem Tissue

Poisoning with volatile substances remains exceptional. Authors report the case of a married couple who were found in a car with a butane gas bottle: the woman was dead and her husband alleged it was an unsuccessful suicide pact. A specific research of volatile substances on postmortem samples with headspace gas chromatography–mass spectrometry following a quantitative determination was performed. The n‐butane concentrations detected were composed of 610 μg/L (cardiac blood), 50 μg/kg (brain), 134 μg/kg (lungs), 285 μg/kg (liver), and 4090 μg/kg (heart) and were compatible with the rare lethal concentrations evoked in the literature. The cause of death was determined to be asphyxiation through n‐butane criminal poisoning. Authors recommendation therefore is to take samples immediately and place them in properly sealed containers and hence analyzing the samples as soon as possible after collecting them or storing them under ?30°C (?22°F) if analyses cannot be performed immediately.     

The Potential of X‐Ray Diffraction in the Analysis of Burned Remains from Forensic Contexts*

Abstract: In view of the difficulties in extracting quantitative information from burned bone, we suggest a new and accurate method of determining the temperature and duration of burning of human remains in forensic contexts. Application of the powder X‐ray diffraction approach to a sample of human bone and teeth allowed their microstructural behavior, as a function of temperature (200–1000°C) and duration of burning (0, 18, 36, and 60 min), to be predicted. The experimental results from the 57 human bone sections and 12 molar teeth determined that the growth of hydroxylapatite crystallites is a direct and predictable function of the applied temperature, which follows a nonlinear logistic relationship. This will allow the forensic investigator to acquire useful information about the equilibrium temperature brought about by the burning process and to suggest a reasonable duration of fire exposure.     

A Case of Contested Cremains Analyzed Through Metric and Chemical Comparison

Since the 1980s, cremation has become the fastest growing area of the U.S. funeral industry. At the same time, the number of litigations against funeral homes and cremation facilities has increased. Forensic anthropologists are often asked to determine whether the contents of an urn are actually cremated bone, and to address questions regarding the identity of the remains. This study uses both metric and chemical analyses for resolving a case of contested cremains. A cremains weight of 2021.8 g was predicted based on the decedent's reported stature and weight. However, the urn contents weighed 4173.5 g. The urn contents also contained material inconsistent with cremains (e.g., moist sediment, stones, ferrous metal). Analysis using XRD and SEM demonstrated that the urn contained thermally altered bone as well as inorganic material consistent with glass fiber cement. Although forensically challenging, cremains cases such as this one can be resolved using a multidisciplinary approach.     

Calcium and Phosphorus Detection Using Benchtop Versus Handheld X‐ray Fluorescence Spectrometers

Elemental analysis of calcium (Ca) and phosphorus (P) has been shown to be useful in differentiating skeletal and nonskeletal material. X‐ray fluorescence spectrometry (XRF) is an attractive, nondestructive technique for forensic anthropologists, and the development of portable XRF instrumentation is promising for field applications. This study examines the performance of handheld XRF instrumentation operated in air compared to a traditional benchtop XRF device that has the ability to control the analysis atmosphere. Both instruments can be used to effectively distinguish skeletal from nonskeletal remains. However, as the measurement atmosphere affects detection levels for calcium and phosphorus, Ca/P ratios obtained from the instruments and analysis conditions were found to differ significantly, with analyses conducted in air showing significantly lower phosphorus detection. Consequently, comparison of Ca/P ratios to conclude skeletal versus nonskeletal origin must be based on data collected under similar analysis conditions.