The Effect of Light Exposure on the Degradation of Latent Fingerprints on Brass Surfaces: The Use of Silver Electroless Deposition as a Visualization Technique

We have studied the degradation of sebaceous fingerprints on brass surfaces using silver electroless deposition (SED) as a visualization technique. We have stored fingerprints on brass squares either (i) in a locked dark cupboard or (ii) in glass‐filtered natural daylight for periods of 3 h, 24 h, 1 week, 3 weeks, and 6 weeks. We find that fingerprints on brass surfaces degrade much more rapidly when kept in the light than they do under dark conditions with a much higher proportion of high‐quality prints found after 3 or 6 weeks of aging when stored in the dark. This process is more marked than for similar fingerprints on black PVC surfaces. Identifiable prints can be achieved on brass surfaces using both SED and cyanoacrylate fuming (CFM). SED is quick and straightforward to perform. CFM is more time‐consuming but is versatile and can be applied to a wider range of metal surfaces than SED, for example brass surfaces which have been coated by a lacquer.     

Luminous lip-prints as criminal evidence

Luminescence is specially a useful property for the search of invisible evidences at the scene of a crime. In the latent fingerprints particular case, there are at one's disposal fluorescent reagents for their localization. The study of latent lip prints (that is lip prints from protective lipstick, or permanent or long-lasting lipstick that do not leave any visible marks) is more recent than fingerprints study. Because of the different composition of both types of prints, different reagents have been tried out on their developing. Although, lysochromes are particularly useful reagents to obtain latent lip prints, it may occur on coloured or multicoloured surfaces, the developing is not perceived due to contrast problems between the reagent and the surface where the print is searched. Again, luminescence offers the possibility to solve this problem. Nile Red is being studied as a potential developer for latent lip prints. The results on very old prints (over 1year) indicate that this reagent is highly efficient to get latent lip prints.     

A further study to investigate the detection and enhancement of latent fingerprints using visible absorption and luminescence chemical imaging

This study investigated the application of chemical imaging to the detection of latent fingerprints using the Condor macroscopic chemical imaging system (ChemImage Corp., Pittsburgh, USA). Methods were developed and optimised for the visualisation of untreated latent fingerprints and fingerprints processed with DFO, ninhydrin, cyanoacrylate, and cyanoacrylate plus rhodamine 6G stain. The results obtained with chemical imaging were compared to the detection achieved using conventional imaging techniques. The Condor significantly improved the detection of many prints, especially those that might be considered poor quality or borderline prints. Prints on newspaper treated with ninhydrin and DFO, and prints on white and yellow paper treated with ninhydrin, benefited the most from chemical imaging detection. In many cases, fingerprints undetectable using conventional imaging techniques could be visualised with chemical imaging. Ridge detail from untreated prints on yellow paper was also detected using the Condor. When prints of high quality were examined, both detection techniques produced quality results. The results of this project demonstrate that chemical imaging offers advantages over conventional visualisation techniques when examining latent fingerprints, especially those that would be considered difficult, such as weak prints or prints on surfaces that produce highly luminescent backgrounds. Standard testing procedures for the detection and enhancement of fingerprints by chemical imaging are presented and discussed.     

Detection of visible and latent fingerprints using micro-X-ray fluorescence elemental imaging

Using micro-X-ray fluorescence (MXRF), a novel means of detecting fingerprints was examined in which the prints were imaged based on their elemental composition. MXRF is a nondestructive technique. Although this method requires a priori knowledge about the approximate location of a print, it offers a new and complementary means for detecting fingerprints that are also left pristine for further analysis (including potential DNA extraction) or archiving purposes. Sebaceous fingerprints and those made after perspiring were detected based on elements such as potassium and chlorine present in the print residue. Unique prints were also detected including those containing lotion, saliva, banana, or sunscreen. This proof-of-concept study demonstrates the potential for visualizing fingerprints by MXRF on surfaces that can be problematic using current methods.     

Finger prints on human skin--results of a general applications-oriented series

Numerous methods have been described for making dactyloscopic traces visible on human skin, but these have never become routine--last but not least because they are too complicated and time-consuming to perform. The purpose of the present investigation was to find out to what extent fingerprints on the skin of deceased persons can be made visible with the help of conventional methods like iodine fuming or brushing with Magna-Brush and can be preserved with gelatine film or moulding material. Of the total number of 486 experimental fingerprints the dermal ridges could be made visible in 150 prints. The best findings were obtained when the trace had been applied several hours post mortem. On the skin of the extremities better results could be achieved than on the trunk or the neck. Dactyloscopic tracing on the skin of bodies in homicide cases should be taken into consideration especially if there is evidence that the perpetrator touched the victim after his/her death (e.g. if the body was transported).     

Development of latent fingerprints on compact disc and its effect on subsequent data recovery

Chance fingerprints may be found on every type of surfaces of contact and when they are latent, need to be developed by various methods. The type of surface on which latent prints are to be developed is one of the important factors when a choice for a method of development is to be made. The matter becomes more crucial when the surface is unique like a compact disc containing digital data. In this case, to develop the fingerprints is not the only matter to be taken care of but also, is very important to select such a method which may not effect the stored data and its retrieval. In present investigation, various methods have been tried to develop fingerprints on the writing surface of a CD and results are discussed with respect to their development as well as its effect on stored data and data retrieval.     

Improved enhancement of ninhydrin developed fingerprints by cadmium complexation using low temperature photoluminescence techniques

Fingerprints developed with ninhydrin form stable, colored complexes when treated with various metal salts. Many of these colored complexes can be used to increase the sensitivity of detection of latent prints because of photoluminescent properties. The intensity of this photoluminescence is increased at low temperature (77K), and this is a common characteristic of each of the complexes formed with salts of the IIb group of the Periodic Table. Spectral characteristics of these Group IIb metal complexes and the influence of environmental factors on their formation are reported. These data have helped determine optimal conditions for the enhancement of ninhydrin developed fingerprints. Taking into account spectral characteristics, solubility, versatility, stability, and reproducibility, the use of the cadmium nitrate tetrahydrate complex is advocated for general use for fingerprint enhancement. The use of zinc nitrate is favored if toxicological considerations are paramount, but ninhydrin development has to be carefully controlled if optimal results are to be obtained. Limited applications for mercuric complexes are found when a red shift is desired to remove background effects.     

硝酸银、茚三酮、DFO法显现纸张上指印的效果比较

目的为有效的提高纸张上汗潜手印的显现率。方法根据汗潜手印的显现原理,针对不同的纸张,分别运用硝酸银、茚三酮与DFO（1,8-二氮芴-9-酮）3种显现方法进行了实验,并对实验结果进行了分析比较。重点分析了这3种方法在显现不同纸张、不同遗留时间、不同汗液量的汗潜手印时的效果及其适用范围。结果为改善渗透性客体上的汗潜手印显现效果,提供科学的依据。     

茚三酮显现汗潜指印的三种操作方法对DNA检测的影响

目的探讨并比较茚三酮显现汗潜指印的3种操作方法,即溶液浸泡法、涂抹法和喷雾法对后续DNA检测带来的影响。方法取16名志愿者的指印分4组,分为茚三酮浸泡法、涂抹法和喷雾法以及空白组,然后提取DlNA进行定量和STR分型检测。结果3种操作方法都会减少汗潜指印DNA的量,喷雾法的损失量最大,浸泡法和涂抹法结果比较接近。结论现场可疑指印检材,应根据检验需要决定指印显现和DNA提取的先后顺序。     

Examination of the steps leading up to the physical developer process for developing fingerprints

This is a systematic study that examines several acid prewashes and water rinses on paper bearing latent prints before its treatment with a silver physical developer. Specimens or items processed with this method are usually pretreated with an acid wash to neutralize calcium carbonate from the paper before the treatment with a physical developer. Two different acids at varying concentrations were tested on fingerprints. Many different types of paper were examined in order to determine which acid prewash was the most beneficial. Various wash times as well as the addition of a water rinse step before the development were also examined. A pH study was included that monitored the acidity of the solution during the wash step. Scanning electron microscopy was used to verify surface calcium levels for the paper samples throughout the experiment. Malic acid at a concentration of 2.5% proved to be an ideal acid for most papers, providing good fingerprint development with minimal background development. Water rinses were deemed unnecessary before physical development.     

Observations on the use of silver compounds for fingerprint visualization

The usefulness of a number of silver salts as alternatives to silver nitrate for the detection of fingerprints is discussed.     

Luminescent visualization of latent fingerprints by direct reaction with a lanthanide shift reagent.

The utilization of the lanthanide shift reagent tris (6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionato) europium (III) [Eu(fod)3] as a simple one-step reagent for the luminescent visualization of latent fingerprints has been investigated. UV excitation of Eu(fod)3-treated prints, achieved by using a hand-held UV lamp or a Polilight, results in an orange emission at 614 nm. Time-resolved imaging is not required for visualization. Visualization of latent fingerprints on paper under the conditions used, although good, was found to be inferior to that obtained by standard DFO (1,8-diazafluoren-9-one) treatment, whereas visualization of prints obtained on aluminum drink cans and galvanized iron proved superior to that obtained by Superglue/panacryl treatment. Eu(fod)3 treatment can also be used first without compromising subsequent ninhydrin or DFO treatment, making it a 'nothing-to-lose" reagent.     

The Use of Liquid Latex for Soot Removal from Fire Scenes and Attempted Fingerprint Development with Ninhydrin*

Abstract: Throughout the United States, clearance rates for arson cases remain low due to fire’s destructive nature, subsequent suppression, and a misconception by investigators that no forensic evidence remains. Recent research shows that fire scenes can yield fingerprints if soot layers are removed prior to using available fingerprinting processes. An experiment applying liquid latex to sooted surfaces was conducted to assess its potential to remove soot and yield fingerprints after the dried latex was peeled. Latent fingerprints were applied to glass and drywall surfaces, sooted in a controlled burn, and cooled. Liquid latex was sprayed on, dried, and peeled. Results yielded usable prints within the soot prior to removal techniques, but no further fingerprint enhancement was noted with Ninhydrin. Field studies using liquid latex will be continued by the (US) Virginia Fire Marshal Academy but it appears that liquid latex application is a suitable soot removal method for forensic applications.     

An Amino Acid Model for Latent Fingerprints on Porous Surfaces*

Abstract: Analytical standards are needed in latent fingerprint detection for research and development as well as for quality control in routine work because normal fingerprints are too varied for comparison studies and tests. One way is to create latent fingerprints. For the amino acid sensitive detection method this can be achieved by coating test items with an amino acid solution using a modified commercial office bubble jet printer. Besides low costs, fast and easy preparation, the main advantage of a bubble jet printer is that the amino acid loading per area on the test item can be calculated by weighing the cartridge on a balance. This opens the possibility to determine the deviation for every printing series. The reproducibility of prints in a printing series made by one cartridge has a deviation of 2–16% and of prints made by different cartridges 20–25%.     

茚三酮固体介质法显现不同纸张表面潜指纹

茚三酮是显现渗透性客体上潜在汗液手印的最常用方法之一,采用微量物证提取纸和茚三酮溶液有机结合制作的茚三酮固体介质可以有效避免客体表面背景着色,不容易引起纸张油墨扩散,另外避免使用的溶剂易燃。能够更便捷的显现现场指纹,并且能够突破茚三酮只能显现渗透性客体的局限,拓宽茚三酮显现客体的范围,在热敏纸上潜指纹的显现方面有独特的应用优势。     

Criminalystic: effectiveness of lysochromes on the developing of invisible lipstick-contaminated lipmarks on human skin. A preliminary study

Latent prints are an important evidence for identification. Nowadays, the technical means, the implementation of image processing techniques and the use of database makes it possible to detect and get information from some prints that seem to be useless at first sight. On the other hand, the possibility of using the print as a DNA source has to be considered, so as to double its identifying value. Human skin is a particularly difficult surface for developing this kind of evidences. Although different methods for locating and developing latent fingerprints on the skin have been already described, it has not been found any method, at the revised bibliography, to obtain and develop invisible lipmarks, that is, lipmarks from protective lipstick, or permanent or long-lasting lipstick. The aim of the work that follows is to determine the effectiveness of several reagents for developing invisible lipmarks on the corpses' skin. Preliminary results show that, under the described experimental conditions, the reagents used, Sudan III, Oil Red O and Sudan Black, are effective for obtaining recent latent lip prints on corpse's skin.     

Ridge Width Correlations between Inked Prints and Powdered Latent Fingerprints

A methodology to estimate the time of latent fingerprint deposition would be of great value to law enforcement and courts. It has been observed that ridge topography changes as latent prints age, including the widths of ridges that could be measured as a function of time. Crime suspects are commonly identified using fingerprint databases that contain reference inked tenprints (flat and rolled impressions). These can be of interest in aging studies as they provide baseline information relating to the original (nonaged) ridges’ widths. In practice, the age of latent fingerprints could be estimated following a comparison process between the evidentiary aged print and the corresponding reference inked print. The present article explores possible correlations between inked and fresh latent fingerprints deposited on different substrates and visualized with TiO₂. The results indicate that the ridge width of flat inked prints is most similar to fresh latent fingerprints_, and these should be used as the comparison standard for future aging studies.     

DNA Profiles from Fingerprint Lifts—Enhancing the Evidential Value of Fingermarks Through Successful DNA Typing

This study evaluated the compatibility of the most common enhancement methods and lifting techniques with DNA profiling. Emphasis is placed on modern lifting techniques (i.e., gelatin lifters and Isomark?) and historical fingerprint lifts for which limited research has been previously conducted. A total of 180 fingerprints were deposited on a glass surface, enhanced, lifted, and processed for DNA typing. DNA could be extracted and profiled for all the powders and lifts tested and from both groomed fingerprints and natural prints with no significant difference in the percentage of profile recovered. DNA profiles could also be obtained from historical fingerprint lifts (79.2% of 72 lifts) with one or more alleles detected. These results demonstrate the compatibility between different powder/lift combinations and DNA profiling therefore augmenting the evidential value of fingerprints in forensic casework.     

Practicability of the mobile one-finger scanner Cross Match MV5 in fingerprinting of corpses: are mobile fingerprinting scanners suitable for use in mass disasters?

Dactyloscopy is a special field in the police records department and a suitable means for identifying unknown dead persons as well as solving crimes by taking fingerprints from living persons. Apart from the conventional methods of dactyloscopy, mobile and more compact instruments are to facilitate taking prints of fingertips and palms also at the scene of mass disasters. In the presented study, living persons and corpses were examined to find out the possible uses and limits of mobile one-finger scanners. The concrete issue of the investigation was whether the mobile one-finger scanner Cross Match MV5 is suitable for application in mass disasters. The device was used in 12 corpses aged 5 weeks to 76 years (mean postmortem interval 5.5 days) and in 28 living persons aged 6 weeks to 87 years. In summary, the scanner produced qualitatively good prints in all age groups of the living individuals. In the corpses, the prints were only partly evaluable. In particular, fingers and fingertips with soot blackening and livid discoloration were difficult to analyse. Postmortem rigidity also complicated the handling of the scanner. In fresh corpses, the scanner can be recommended without reservation. Even if the epidermis was detached, the scanner was able to produce evaluable prints of the dermis of the hypothenar.     

Doped hydrophobic silica nano- and micro-particles as novel agents for developing latent fingerprints

Novel hydrophobic silica based particles have been developed to visualise latent fingerprints. The composition of the particles has been designed to maximise both hydrophobic and ionic interactions between a variety of coloured and fluorescent reporter molecules and the silicate backbone within the particles. The resulting doped particles retain the incorporated dyes with high affinity. In addition, a variety of sub-particles have also been embedded to again produce coloured or magnetisable hydrophobic particles. The particles can be harvested as nanoparticles or microparticles. The former are applied to latent fingerprints as an aqueous suspension and the latter as a dusting agent using brushes or a magnetic wand. Examples of the prints produced using these agents are given. The resulting prints have good definition.