Application of Raman spectroscopy in forensic investigation of questioned documents involving stamp inks

Stamp pad inks from different manufacturers across India have been analyzed to investigate the feasibility of Raman scattering as a tool for forensic analysis of questioned documents involving stamp inks. Nine different stamping inks were analyzed by both Raman spectroscopic and HPTLC methods. The results demonstrate the effectiveness of these methods in classifying the investigated stamping inks based on their spectral pattern and HPTLC chromatogram. Raman scattering tool was able to determine the sequence of heterogeneous intersection strokes involving a blue stamp pad ink and other writing instruments, such as ballpoint pen ink (red and black), pencil and laser printer toner. However, this method was unable to resolve the exact sequencing for the intersection strokes involving investigated stamp ink and blue ballpoint ink or gel pen ink (all colors).     

Identification of colorants in pigmented pen inks by laser desorption mass spectrometry

Pigments are rapidly replacing dyes as colorants in pen and printer inks, due to their superior colors and stability. Unfortunately, tools commonly used in questioned document examination for analyzing pen inks, such as TLC, cannot be used for the analysis of insoluble pigments on paper. Laser desorption mass spectrometry is demonstrated here as a tool for analyzing pigment-based pen inks. A pulsed nitrogen laser can be focused onto a pen stroke from a pigmented ink pen on paper, and positive and negative ions representative of the pigment can be generated for subsequent mass spectrometric analysis. Targeted pens for this work were a set of Uni-ball 207 pigmented ink pens containing blue, light blue, orange, green, violet, red, pink, and black inks. Copper phthalocyanine was identified as the pigment used to make both blue inks. A mixture of halogenated copper phthalocyanines were identified in the green ink. Unexpectedly, the pink ink was found to contain a red pigment, Pigment Red 12, treated with a mixture of water-soluble dyes. Each sample yielded ions representative of the pigments present.     

Sequencing the intersections of printed strokes with writing instrument strokes using DocuCentre expert (PIA 6000-EDF)

Introduction of the digital techniques in document examination has encouraged the Forensic Document Examiners to work with better accuracy in non-destructive ways. In this study, the examination of sequence of intersecting strokes of printers (inkjet printer, laser printer, dot-matrix printer) and typewriters with writing instruments (gel ink pen, ballpoint pen and fountain pen) of different colors was carried out by using Docucenter Expert via PIA-6000 software utilizing extended depth of focus. The continuity of the stroke is the only characteristic which has been observed at the point of intersection.     

Determining the sequence of intersecting gel pen and laser printed strokes — A comparative study

The relative chronological sequence of intersecting gel pen ink lines and laser printed marks has been determined using optical methods. The results were obtained by observing spectral reflection, relative sheen, skipping and gaps of gel pen ink strokes at the point of intersection. The intersections are observed under stereomicroscope and digital microscope. The effectiveness of both the optical instruments for sequence of the strokes has been compared. The sequence of intersecting lines (of same colour, different colours and where one of the strokes is darker) has been established.     

Use of lycode powders for the examination of documents partially written with erasable ball point pen inks

It was discovered by change that lycode powders adhere to erasable ball point pen ink strokes. A study of this phenomenon was carried out to determine what type of inks reacts physically with lycode powders. A further evaluation was made to learn if this effect continued after the erasable ink became indelible. It was also found that obliterated erasable ball point pen ink can be read by applying lycode powders and that the powders react in a similar way with typewriting from a conventional inked typewriter ribbon. Treatment in this case is completely non-destructive since the lycode powder can be wiped off the paper surface.     

拉曼光谱成像技术检验朱墨时序中书写笔种类对检验结果的影响研究

目的考察在运用拉曼光谱阵列面扫描检验朱墨时序的方法中书写笔油墨种类对检验结果的影响。方法根据拉曼谱图的不同对搜集的188种书写笔（包括22种黑色圆珠笔,62种蓝色圆珠笔,62种黑色签字笔,42种蓝色签字笔）进行扫描并分类,采用拉曼光谱阵列面扫描技术对书写笔与同一印泥和印油形成的朱墨时序样本进行检验。结果 188种书写笔被分为4大类23小类,4类书写笔与印泥或印油形成的朱墨时序样本都得到了较好的检验结果。结论在本实验条件下,书写笔油墨种类对拉曼光谱阵列面扫描检验朱墨时序的检验结果没有影响。     

A lifting process for determining the writing sequence of two intersecting ball-point pen strokes

The authors describe a technique for determining the order in which two intersecting ball-point pen strokes were made by means of lifting part of the ink with KromeKote paper. The KromeKote paper is applied to the intersection with the glossy side against the writing. The back of the lifting paper is rubbed with a blunt pointed instrument using moderate pressure. Study of the lift under low magnification discloses a pattern of edge markings with those from the last written line dominating the intersection. Results show a high percentage of accuracy.     

Hyperspectral imaging of gel pen inks: An emerging tool in document analysis

Hyperspectral imaging (HSI) is a useful technique in the examination of writing inks, including gel pen inks, which combines digital imaging with % reflectance spectroscopy. This facilitates the detection of subtle differences between chemically similar inks. This study analysed a variety of blue, red and black gel inks on white office paper using HSI. The potential of the technique for ink discrimination compared to other analytical methods of examination is highlighted. Discriminating powers of 1.00, 0.90 and 0.40 were achieved using HSI for red, blue and black gel inks respectively. The overall discriminating power of 0.76 for the technique combined with its non-destructive nature and minimal sampling requirements demonstrates promise for this type of application.     

Preliminary Study on Determining the Sequence of Intersecting Lines by Fluorescence Technique

The determination of the sequence of intersecting lines is an important part of questioned document examinations. A fluorescence technique was used to determine the sequence of heterogeneous intersecting lines produced using inkpad ink, stamp‐pad ink, ballpoint pens, gel pens, fountain pens, colorants of carbon paper, photocopiers, laser printers, and inkjet printers. A SteREO Discovery.V20 equipped with the ZEN Blue Lite software was chosen to perform the tests.As the results obtained from the study were positive under most conditions, the fluorescence technique was found to be very successful in determining the sequence of intersecting lines from ballpoint pen, gel pen, fountain pen, photocopier, laser and inkjet printers, and inkpad inks. The method was also successful in determining the sequence of intersecting lines from ballpoint pen, photocopier, laser printer, and stamp‐pad inks under most conditions. The technique was not successful in determining the order of crossing lines blending together.     

无交叉笔画状态下激光打印文字与中性笔书写文字形成时序的实验研究

目的探索无交叉笔画状态下激光打印文字与中性笔书写文字的时序特征及变化规律,以求运用于案件检验。方法以两种不同时序,请5名志愿者分别执不同中性笔在120张A4纸张上书写文字,并使用4台不同型号激光打印机打印文字,再运用奥博视频层晰显微镜对实验样本进行放大观察。结果证实在两种时序条件下制作的实验样本之间存在诸多差异性特征。结论这些差异性特征为准确判定无交叉笔画状态下激光打印文字与中性笔书写文字的时序提供了基础实验依据。     

Ballpoint pen inks: characterization by positive and negative ion-electrospray ionization mass spectrometry for the forensic examination of writing inks

A method based on profiling of dye components by electrospray ionization mass spectrometry (ESI/MS) is described for the characterization of ballpoint pen inks. The method involves benzyl alcohol (30 microL) extraction of ink from paper. The extracts of ink lines 1 and 5 mm in length are used for direct ESI/MS analysis in positive and negative modes, respectively. The instrumental analysis takes 3 min. Basic and acid dyes in the inks are detected in the positive and negative modes, respectively, with each dye yielding one or two characteristic ion peaks. The mass spectrum, which is mainly a compositional signature of the dyes in the ink, was not affected by the type of paper from which the ink was extracted, or by natural ageing of the ink on document in the absence of light. However, exposure to fluorescent illumination caused dealkylation of polyalkylated basic dyes and resulted in changes in the homologous distribution of the dyes. In this study, a total of 44 blue inks, 23 black inks, and 10 red inks have been analyzed, and the mass spectra were used to establish a searchable library. ESI/MS analysis provides a simple and fast way to compare ink specimens and in combination with on-line library search permits rapid screening of inks for forensic document investigations.     

蓝色圆珠笔字迹色痕FT-IR光谱经时变化的研究

笔者曾用FT-IR光谱法对108种不同蓝色圆珠笔油墨进行了系统分析,确定了油墨组成成份,实现了种类认定.在此基础上,选取了二种不同种类的蓝色圆珠笔油墨字迹色痕,在紫外光下定时照射,根据各自光谱特征峰校正峰高的计算,确定相关峰的相对峰高比.根据相对峰高比值随时间变化的规律,进行了曲线拟合和计算机编程.同时,探讨了油墨组份之间随光照时间的变化,其目的是为了推断字迹色痕的“年龄”.     

An Examination of the Sequence of Intersecting Lines using Microspectrophotometry

The potential of microspectrophotometry as a technique to determine the sequence of intersecting lines was examined. The technique was used to determine the sequence of heterogeneous line intersections produced using inkpad, stamp‐pad ink and ballpoint pens, gel pens, fountain pens, laser and ink‐jet printers. The study was carried out with an assumption that the peak characteristics of spectra from the point of intersection should correspond to the peak characteristics of pure ink which was executed later. According to spectral reflectance curves, microspectrophotometry was possible to determine whether the ink was above or below the inkpad/stamp‐pad ink seals. In blind testing, microspectrophotometry technique results were directly compared to those obtained by five experienced forensic document examiners using optical microscopy regularly employed in casework. As the results obtained from the study were positive, microspectrophotometry technique was found to be very successful in determining the sequence of heterogeneous line intersections under some conditions.     

Determination of the Chronological Order of a Laser Printing and Gel Pen Writing Without any Crossing Strokes

Laser printers and writing instruments are being exploited by the forgers to produce fabricated documents. They often produce such documents by appending genuine signature on a blank sheet and later printing on it. Often these fabricated documents do not contain intersection of strokes and may pose a difficulty to forensic document examiners in analyzing cases related to such documents. Keeping in mind the limited research work done on nonintersecting strokes, the present study has been conducted with an aim to determine the sequence of nonintersecting strokes of gel pens and laser printers. Three hundred samples of nonintersecting strokes of gel pen ink and laser printing were prepared. Of these 300, 150 had laser-printed text below the gel pen strokes and the remaining 150 were prepared with gel pen stokes below the laser-printed text. The samples have been analyzed using Nikon SMZ 800N stereomicroscope. Three micro-conformation features, that is, pattern of toner distribution, ink distribution, and fiber distribution have been observed in the samples. The results demonstrate the successful establishment of sequence of nonintersecting strokes in case of gel pen and laser-printed documents by the determination of micro-conformation features.     

Classification and individualization of black ballpoint pen inks using principal component analysis of UV-vis absorption spectra

The technique of principal component analysis has been applied to the UV-vis spectra of inks obtained from a wide range of black ballpoint pens available in the UK market. Both the pen ink and material extracted from the ink line on paper have been examined. Here, principal component analysis characterised each spectrum within a group through the numerical loadings attached to the first few principal components. Analysis of the spectra from multiple measurements on the same brand of pen showed excellent reproducibility and clear discrimination between inks that was supported by statistical analysis. Indeed it was possible to discriminate between the pen ink and the ink line from all brands examined in this way, suggesting that the solvent extraction process may have an influence on these results. For the complete set of 25 pens, interpretation of the loadings for the first few principal components showed that both the pen inks and the extracted ink lines may be classified in an objective manner and in agreement with the results of parallel thin layer chromatography studies. Within each class almost all inks could be individualised. Further work has shown that principal component analysis may be used to identify a particular ink from a database of reference UV-vis spectra and a strategy for developing this approach is suggested.     

A statistical methodology for the comparison of blue gel pen inks analyzed by laser desorption/ionization mass spectrometry

A statistical methodology for the objective comparison of LDI-MS mass spectra of blue gel pen inks was evaluated. Thirty-three blue gel pen inks previously studied by RAMAN were analyzed directly on the paper using both positive and negative mode. The obtained mass spectra were first compared using relative areas of selected peaks using the Pearson correlation coefficient and the Euclidean distance. Intra-variability among results from one ink and inter-variability between results from different inks were compared in order to choose a differentiation threshold minimizing the rate of false negative (i.e. avoiding false differentiation of the inks). This yielded a discriminating power of up to 77% for analysis made in the negative mode. The whole mass spectra were then compared using the same methodology, allowing for a better DP in the negative mode of 92% using the Pearson correlation on standardized data. The positive mode results generally yielded a lower differential power (DP) than the negative mode due to a higher intra-variability compared to the inter-variability in the mass spectra of the ink samples.     

Determination of the sequence of intersecting lines from laser toner and seal ink by Fourier transform infrared microspectroscopy and scanning electron microscope / energy dispersive X-ray mapping

The aim of this study was to verify that the combination of Fourier transform infrared microspectroscopy and scanning electron microscope / energy dispersive X-ray mapping could be applied to line intersection problems. The spectral data of red seal ink, laser toner and their intersections, such as peak location and peak intensity, were described. Relative peak height ratios of different chemical components in intersecting lines were used to distinguish the sequences. Energy dispersive X-ray mapping characteristics of intersecting areas were also detailed. The results show that both the laser toner and the seal ink appear on the surface of intersections, regardless of the sequence. The distribution of the two inks on the surface is influenced not only by the sequence of heterogeneous lines but also by diffusion. Fourier transform infrared microspectroscopy and scanning electron microscope/energy dispersive X-ray mapping are able to explore the chemical components and the corresponding elemental distribution in the intersections. The combination of these two techniques has provided a reliable method for sequencing intersecting lines of red seal ink and laser toner, and more importantly, this method may be a basis for sequencing superimposed lines from other writing instruments.     

Experimental Research on Class Identification with a New Type of Erasable Gel Pens

A new type of erasable gel pen ink is becoming increasingly popular because of the modifiable characteristics for writing on documents. This study attempts to distinguish 12 types of blue and black erasable gel pens produced by mainstream stationery manufacturers using infrared (IR) visual analysis, Fourier transform infrared (FTIR) analysis, fluorescence analysis, and microspectrophotometry. The results demonstrate that IR visual, FTIR, and fluorescence analysis can be used to help distinguish each type of erasable gel ink. While microspectrophotometry can be used to effectively differentiate the blue gel inks in this study, there are limitations with respect to distinguishing black erasable gel pens. When these four optical analyses methods were used in combination, the gel inks could be accurately distinguished.