Investigating Residential History Using Stable Hydrogen and Oxygen Isotopes of Human Hair and Drinking Water

The relationship between isotopic signals in human hair and geographic region has potential forensic applications for identifying unknown individuals' place of recent residence. This study analyzes δ²H and δ¹⁸O isotopes in residential tap water and bulk hair samples from 17 volunteers representing 12 locations in Ontario, Canada. There is a strong correlation (R² = 0.9) between δ²H and δ¹⁸O values of the water samples. In contrast, the δ²H and δ¹⁸O values of the hair samples are weakly correlated (R² = 0.3), and the greater variability in the data is linked to dietary factors. This study demonstrates that the δ²H and δ¹⁸O values of hair and drinking water can be used to help identify potential place of residence in forensic cases, particularly in relation to proximity to large bodies of water such as the Great Lakes, but interpretations are complicated by the contribution of both water and diet to δ²H and δ¹⁸O values in hair.     

A City‐wide Investigation of the Isotopic Distribution and Source of Tap Waters for Forensic Human Geolocation Ground‐truthing

Human geolocation is prefaced on the accuracy of the geographic precision of mapped isotopic values for drinking water. As most people live in cities, it becomes important to understand city water supplies and how the isotopic values uniquely reflect that city. This study investigated the isotopic distribution of δ²H and δ¹⁸O from sourced tap waters that were collected from across the Metro Vancouver (MV) area (n = 135). The results revealed that the isotopic values reflect their water sources with a range of 5.3‰ for δ¹⁸O_tap and 29.3‰ for δ²H_tap for MV. The results indicate that individual cities need higher resolution studies to determine their tap water isotopic ranges, and a good understanding of the water supply network itself for human geolocation work. With an extended high‐resolution understanding of each city, human tissue may be compared with more certainty for geolocation.     

Case of Fatal Starvation: Can Stable Isotope Analysis Serve to Support Morphological Diagnosis and Approximate the Length of Starvation?

The diagnosis of death as a result of starvation is established on anthropological measurements, visual appearance of the deceased on external and internal examination, microscopic analysis, laboratory testing, and exclusion of other causes of death. Herein, we present our findings on a case of 95‐year‐old man who died of starvation. After the diagnosis of starvation was established by traditional forensic medicine methods, we have conducted retrospective segmental analysis of stable carbon (δ¹³C) and nitrogen (δ¹⁵N) isotope ratios in hair sample. This method reveals periods of starvation through decrease in δ¹³C and increase in δ¹⁵N along the strand of hair. Our analysis revealed the decrease of 0.6 ‰ in δ¹³C during the last 10–12 weeks prior to death, similar as reported in other investigations. Also, a decrease of 0.7 ‰ in δ¹⁵N during the last 8–10 weeks prior to death was determined that was different than observed in previous studies.     

Variation of δ2H, δ18O & δ13C in crude palm oil from different regions in Malaysia: Potential of stable isotope signatures as a key traceability parameter

A total of 33 crude palm oil samples were randomly collected from different regions in Malaysia. Stable carbon isotopic composition (δ¹³C) was determined using Flash 2000 elemental analyzer while hydrogen and oxygen isotopic compositions (δ²H and δ¹⁸O) were analyzed by Thermo Finnigan TC/EA, wherein both instruments were coupled to an isotope ratio mass spectrometer. The bulk δ²H, δ¹⁸O and δ¹³C of the samples were analyzed by Hierarchical Cluster Analysis (HCA), Principal Component Analysis (PCA) and Orthogonal Partial Least Square-Discriminant Analysis (OPLS-DA). Unsupervised HCA and PCA methods have demonstrated that crude palm oil samples were grouped into clusters according to respective state. A predictive model was constructed by supervised OPLS-DA with good predictive power of 52.60%. Robustness of the predictive model was validated with overall accuracy of 71.43%. Blind test samples were correctly assigned to their respective cluster except for samples from southern region. δ¹⁸O was proposed as the promising discriminatory marker for discerning crude palm oil samples obtained from different regions. Stable isotopes profile was proven to be useful for origin traceability of crude palm oil samples at a narrower geographical area, i.e. based on regions in Malaysia. Predictive power and accuracy of the predictive model was expected to improve with the increase in sample size. Conclusively, the results in this study has fulfilled the main objective of this work where the simple approach of combining stable isotope analysis with chemometrics can be used to discriminate crude palm oil samples obtained from different regions in Malaysia. Overall, this study shows the feasibility of this approach to be used as a traceability assessment of crude palm oils.     

Refining Stable Oxygen and Hydrogen Isoscapes for the Identification of Human Remains in Mississippi,

Isoscape refinement is an essential component for accurately predicting region‐of‐origin in forensic investigations involving isotope analysis of unidentified human remains. Stable oxygen (δ¹⁸O) and hydrogen (δ²H) isotopes were measured from 57 tap water samples collected across Mississippi to model refined isoscapes for the state. A tap water conversion equation, δ¹⁸O_tw=1.64 δ¹⁸Op?31.35, was developed for the southeastern USA to test the prediction accuracy of the δ¹⁸O_tw isoscape using individuals with known residential histories. A local Mississippi resident (USAFA‐134) was assigned with 90% probability to the correct region‐of‐origin reported by the participant. Assignments for Georgia residents (USAFA‐118 and USAFA‐205) had variable results, predicting USAFA‐118 from Mississippi and USAFA‐205 as a nonlocal resident. Stable isotope values often overlap geographically and a multi‐isotope approach should be used when narrowing region(s)‐of‐origin(s). This study demonstrates the utility of refining isoscapes and the importance of tissue calibration in prediction assignments of human remains.     

Temporal variation of oxygen isotope ratios (δ18O) in drinking water: implications for specifying location of origin with human scalp hair

Previous work suggests that δ(18)O values of human hair can be used to constrain the region-of-origin of unknown individuals, but robust assessments of uncertainties in this method are lacking. Here we assess one source of uncertainty - temporal variation in the δ(18)O value of drinking water - using a monthly tap water survey of δ(18)O to develop geospatial models (i.e., maps) of the intra-annual variation (seasonality) in tap water δ(18)O for the contiguous USA. Temporal variation in tap water δ(18)O was correlated with water-supply type, and was related to geographic patterns of precipitation δ(18)O seasonality and water residence time. The maps were applied in a Bayesian framework to identify the geographic origin of an unidentified woman found in Utah, based on measured δ(18)O of scalp hair. The results are robust in specifying parts of the western USA as the most likely region-of-origin. Incorporation of tap water δ(18)O seasonality in the analysis reduces the precision of geographic assignments, but other sources of uncertainty (e.g., spatial interpolation uncertainty) have an equal or larger effect.     

Spatial Distributions of Oxygen Stable Isotope Ratios in Tap Water From Mexico for Region of Origin Predictions of Unidentified Border Crossers

One of the many difficulties associated with identifying undocumented border crossers stems from an inability to narrow down the search area for the region of origin and family members to obtain family reference samples for DNA comparison. While the geography of regions of origins is wide, the biological profiles of the undocumented border crossers often show strong similarities, young and male. The isotopic composition of human bones, teeth, and hair has been demonstrated to be useful biomarkers for tracing locations and movements of individuals and for aiding in the identification of human remains. Data obtained from human remains can be compared to and aligned with various reference sources, such as soils and bedrock, archaeological remains, or cultural data. Here, the spatial deficiency in isotopic reference data for Mexico, specifically for oxygen (δ¹⁸O) isotopes in tap water, is being addressed through the collection and analysis of over 150 water samples and explored with tooth enamel isotopic values from recently identified Mexican nationals. The isoscape was developed using a Spine with Barriers interpolation method and shows sufficient detail to narrow down the regions where specific isotopic values are represented. The individuals were plotted on the developed isoscape using conditional correlations. The methodology was successful in assigning the correct regions of origin for the two individuals, which shows the tremendous potential of the developed isoscape. Nonetheless, there is more research needed to further improve upon this geolocation method, including analysis of multiple isotopes in different tissues, and the development of new isotopic methods.     

Stable isotope analysis of human hair and nail samples: the effects of storage on samples

When submitting samples for analysis, maintaining sample integrity is essential. Appropriate packaging must be used to prevent damage, contamination or loss of sample. This is particularly important for stable isotope analysis by isotope ratio mass spectrometry as this technique is capable of detecting subtle differences in isotopic composition with great precision. In a novel study, scalp hair and fingernail samples were placed in five different types of packaging, routinely used in forensic laboratories and stored for 6 weeks and 6 months. Samples were subsequently cleaned and submitted for (13)C/(12)C, (15)N/(14)N, (2)H/(1)H and (18)O/(16)O analysis. Results from (13)C analysis indicate that type of packaging can cause slight changes in (13)C abundance over time. Differences were noted in the (15)N isotope signatures of both hair and nail samples after 6-week storage, but not after 6 months. This apparent discrepancy could be a result of the packaging not being properly sealed in the 6 weeks study. Fewer differences were noted when analyzing samples for (2)H and (18)O abundance.     

The Measurement of Stable Carbon Isotope Ratios of Eight Methamidophos Samples

Between December 2007 and January 2008, people suffered from food poisoning in the Japanese prefectures of Chiba and Hyogo after eating frozen dumplings (gyoza) produced in China, which had very high concentrations (1490–19,290 ppm) of methamidophos (O,S‐dimethyl phosphoramidothioate). Thus, we measured the stable carbon isotope ratio of methamidophos using GC/C/IRMS to identify the source. We analyzed seven methamidophos reagents and one Chinese agricultural methamidophos chemical (MTD600) that contained many impurities. The δ¹³C values of the seven methamidophos reagents and MTD600 ranged from ?49.23‰ to ?31.90‰, with an average SD of 0.20‰, very high precision. This difference (17.33‰) was very large compared with that in previous reports and may be attributable to the material itself and the chemical processing of methamidophos. Criminals can easily obtain pesticides such as methamidophos; therefore, it is very important to identify the pesticide source and distribution route using stable isotopic science in the future.     

A test to identify cyanide origin by isotope ratio mass spectrometry for forensic investigation

Cyanide is one of the common poisons in murders. When cyanide has been used, to identify the origin of cyanide may be necessary in the forensic investigation. We have examined the possibility of distinguishing different commercial cyanide samples through the δ(13)C and δ(15)N values and developed a protocol for the isotope analysis of cyanide extracted from several matrices as food and medicine. Several cyanide precipitates were tested for the isotope analysis. The results show that cupric ferrocyanide Cu(2)[Fe(CN)(6)] is the most appropriate precipitate for the analysis. Thirteen batches of KCN and nine batches of NaCN chemicals were randomly chosen from different suppliers. The cyanides were converted to cupric ferrocyanide and then analysed by isotope ratio mass spectrometry coupled to elemental analysis (EA-IRMS). The isotopic signature of the commercial samples varied from -51.96 to -25.77 ‰ for δ(13)C and from -4.51 to +3.81 ‰ for δ(15)N, highlighting the potential of applying EA-IRMS technique to identify cyanide from different batches and sources. The influence of the cyanide extraction and isolation from spiked matrix on the isotopic analysis was also studied. Three matrices: orange juice, yogurt drink and a medicine were tested. In many cases, the isotopic analysis results obtained from the original cyanides precipitates and those isolated from the matrices showed a good accordance, especially for δ(15)N. In some matrices, the (13)C analysis was interfered by co-precipitates. With carefully elaborated working protocol, determining the isotope ratio of N and C in cyanide by EA-IRMS is a promising method for forensic investigations.     

Isotope ratio mass spectrometry as a tool for forensic investigation (examples from recent studies).

The versatility of isotope ratio mass spectrometry is demonstrated by reference to diverse case studies. Variations in the natural isotopic composition of non-biological, organic materials are compared as a means by which samples may be associated or discriminated. These techniques may be used to augment or compliment conventional forensic methodologies. delta13C analysis was used to demonstrate that different masking tape had been recovered in two, apparently similar cases, involving the smuggling of money. Visually similar ecstasy tablets were compared by consideration of the delta13C and delta15N composition of MDMA extracted from the tablets. Although only a limited number of tablets were analysed, the isotopic similarity between two different seizures was sufficient to induce a guilty plea from a person suspected of possessing both. A combination of delta2H, delta13C, delta15N and delta18O together with GC-MS analyses were applied to small samples of seized heroin. Although GC-MS analysis indicated differences between the chemical composition of two of the heroin samples, isotopic analysis suggested similarities, which were confirmed by further delta2H, delta13C and delta18O isotopic analysis of the clingfilm in which the samples were wrapped.     

The Potential of Isotope Ratio Mass Spectrometry (IRMS) and Gas Chromatography‐IRMS Analysis of Triacetone Triperoxide in Forensic Explosives Investigations

Studying links between triacetone triperoxide (TATP) samples from crime scenes and suspects can assist in criminal investigations. Isotope ratio mass spectrometry (IRMS) and gas chromatography (GC)‐IRMS were used to measure the isotopic compositions of TATP and its precursors acetone and hydrogen peroxide. In total, 31 TATP samples were synthesized with different raw material combinations and reaction conditions. For carbon, a good differentiation and a linear relationship were observed for acetone–TATP combinations. The extent of negative (δ¹³C) fractionation depended on the reaction yield. Limited enrichment was observed for the hydrogen isotope (δ²H) values of the TATP samples probably due to a constant exchange of hydrogen atoms in aqueous solution. For oxygen (δ¹⁸O), the small isotopic range and excess of water in hydrogen peroxide resulted in poor differentiation. GC‐IRMS and IRMS data were comparable except for one TATP sample prepared with high acid concentration demonstrating the potential of compound‐specific isotope analysis. Carbon IRMS has practical use in forensic TATP investigations.     

Immunoenzyme AB0 blood group determination using a single hair. I

The immunoenzyme technique was used to determine the ABO blood group of strands of human scalp hair. The hair was obtained from 168 individuals of known blood groups (A1: n = 58; A2: n = 11; B: n = 28; O: n = 46; A1B: n = 16; A2B: n = 9). Immunostaining was carried out by using monoclonal anti-A, anti-B and anti-H as primary antibodies. Group-specific staining was clearly observed within the medulla of the hair. The ABO blood group of all hair samples was determined correctly by the Sternberger (PAP) or APAAP (immunoalkaline phosphatase) technique. The present study indicates that immunoenzyme techniques can be regarded as practical methods for determining ABO blood group of hair.     

Discrimination of Geographical Origin of Asian Garlic Using Isotopic and Chemical Datasets under Stepwise Principal Component Analysis

Isotopic compositions of δ²H, δ¹⁸O, δ¹³C, and δ¹⁵N and concentrations of 22 trace elements from garlic samples were analyzed and processed with stepwise principal component analysis (PCA) to discriminate garlic's country of origin among Asian regions including South Korea, Vietnam, Taiwan, and China. Results indicate that there is no single trace‐element concentration or isotopic composition that can accomplish the study's purpose and the stepwise PCA approach proposed does allow for discrimination between countries on a regional basis. Sequentially, Step‐1 PCA distinguishes garlic's country of origin among Taiwanese, South Korean, and Vietnamese samples; Step‐2 PCA discriminates Chinese garlic from South Korean garlic; and Step‐3 and Step‐4 PCA, Chinese garlic from Vietnamese garlic. In model tests, countries of origin of all audit samples were correctly discriminated by stepwise PCA. Consequently, this study demonstrates that stepwise PCA as applied is a simple and effective approach to discriminating country of origin among Asian garlics.     

A comparison of plastic cable ties based on physical,chemical and stable isotopic measurements

Plastic cable ties can be utilised in a range of serious criminal activities and a comparison of cable ties, or fragments, may form part of the physical evidence presented to a Court of law. This research assessed the potential value of evidence based on the analysis of plastic cable ties. Twenty packets of black coloured plastic cable ties (nominally 200 mm × 4.8 mm) were purchased in pack sizes ranging from 25 to 100 individual cable ties (Brisbane, Australia, March 2015). Representative samples from each packet were visually examined, compared and tested to determine their physical dimensions, chemical compositions and stable isotopic compositions (δ²H, δ¹³C and δ¹⁵N).All of the individual cable ties from a given packet were found to be indistinguishable with respect to appearance, physical, chemical and isotopic measurements (within-batch variability). Individual cable ties were also found to be isotopically homogeneous with respect to hydrogen, carbon and nitrogen. All of the cable ties analysed were found to have very similar chemical compositions and to be manufactured predominantly from nylon 6,6. The elemental compositions of composite samples, prepared from each packet, were found to be highly variable and, as such, were of very limited value.Cable ties from ten of the twenty packets were uniquely characterised by physical appearance (between-batch variability). Physical measurements such as the width, thickness and tooth-count of the grip section did not provide additional discrimination. Cable ties from nineteen of the twenty packets were uniquely characterised by isotopic composition, based on δ²H and δ¹⁵N measurements. Samples from two packets of Crescent brand cable ties were found to be indistinguishable with respect to all of the tests applied in this study. These two packets were inadvertently purchased from the same retailer and had the same barcode and batch number. It was considered a reasonable assumption that these two packets originated from the same manufacturing batch.The authors reason that a likelihood ratio (that might be presented to a Court of law) can be derived from this type of discrete data based on a calculation of the possible combinations of distinguishable objects (unordered sampling with replacement) in a convenience sample collected from the background population. In this example, a database of 19 distinguishable objects can yield a likelihood ratio as high as 210, with a verbal equivalent of “moderately strong support” for a proposition that two cable ties have the same isotopic composition because they originate from the same batch rather than by random chance.     

Sourcing explosives: A multi-isotope approach

Although explosives are easily identified with current instrumental techniques, it is generally impossible to distinguish between sources of the same substance. To alleviate this difficulty, we present a multi-stable isotope (δ¹³C, δ¹⁵N, δ¹⁸O, δD) approach for appraising the possibility of discriminating explosives. The results from 30 distinct PETN, TNT and ANFO samples show that the different families of explosives are clearly differentiated by both their specific isotope signatures and their combination with corresponding element concentrations. Coupling two or more of the studied isotope systematics yields an even more precise differentiation on the basis of their raw-material origin and/or manufacturing process.     

Comparison of bulk and compound-specific δ13C isotope ratio analyses for the discrimination between cannabis samples

Five marijuana samples were compared using bulk isotope analysis compound-specific isotope ratio analysis of the extracted cannabinoids. Owing to the age of our cannabis samples, four of the five samples were compared using the isotope ratios of cannabinol (CBN), a stable degradation product of Δ(9)-tetrahydrocannabinol (THC). Bulk δ(13)C isotope analysis discriminated between all five samples at the 95% confidence level. Compound-specific δ(13)C isotope analysis could not distinguish between one pair of the five samples at the 95% confidence level. All the measured cannabinoids showed significant depletion in (13)C relative to bulk isotope values; the isotope ratios for THC, CBN, and cannabidiol were on average 1.6‰, 1.7‰, and 2.2‰ more negative than the bulk values, respectively. A more detailed investigation needs to be conducted to assess the degree fractionation between the different cannabinoids, especially after aging.     

Hair analysis for drug abuse: I. Determination of methamphetamine and amphetamine in hair by stable isotope dilution gas chromatography/mass spectrometry method

Determination of methamphetamine and amphetamine in hair was performed by gas chromatography/mass spectrometry using stable isotope-labeled internal standards, 2-methylamino-1-phenylpropane-2,3,3,3-d4 and 2-amino-1-phenylpropane-2,3,3,3-d4. Extraction of hair with methanol/5M hydrochloric acid (20:1) using ultrasonication was chosen as the standard method. The calibration curves for amphetamines in the hair were linear from 1 to 100 ng/mg (r greater than 0.99). The detection limit was 0.5 ng/mg at the 95% confidence level. The coefficients of variation (CV) (n = 8) of analysis using the spiked hair with methamphetamine were from 0.7 to 6%. The CV (n = 8) of analysis of the methamphetamine abuser's hair was 17.5%. Sectional analysis of monkey and human hair after methamphetamine ingestion suggested a good correlation between the duration of drug use and drug distribution in the hair.     

Forensic utility of carbon isotope ratio variations in PVC tape backings

Forensic interest in adhesive tapes with polyvinyl chloride (PVC) backings (electrical tape) derives from their use in a variety of illicit activities. Due to the range of physical characteristics, chemical compositions, and homogeneity within a single roll of tape, traditional microscopic and chemical analyses can offer a high degree of discrimination between tapes, permitting the assessment of potential associations between evidentiary tape samples. The carbon isotope ratios of tapes could provide additional discrimination among tape samples. To evaluate whether carbon isotope ratios may be able to increase discrimination of electrical tapes, particularly with regards to different rolls of tape of the same product, we assessed the δ(13)C values of backings from 87 rolls of PVC-based black electrical tape (~20 brands, >60 products) Prior to analysis, adhesives were removed to prevent contamination by adhering debris, and plasticizers were extracted because of concern over their potential mobility. This result is consistent with each of these tapes having approximately the same plasticizer δ(13)C value and proportion of carbon in these plasticizers. The δ(13)C values of the 87 PVC tape backings ranged between -23.5 and -41.3 (‰, V-PDB), with negligible carbon isotopic variation within single rolls of tape, yet large variations among tape brands and tape products. Within this tape population, carbon isotope ratios permitted an average exclusion power of 93.7%, using a window of +/-0.3‰; the combination of carbon isotope ratio measurement with additional chemical and physical analyses raises the discrimination power to over 98.9%, with only 41 out of a possible 3741 pairs of tape samples being indistinguishable. There was a linear relationship between the δ(13)C value of tape backings and the change in δ(13)C value with the extraction of plasticizers. Analyses of pre- and post-blast tape sample pairs show that carbon isotope signatures are within 0.3‰ of pre-blast values, indicating that carbon isotope values are largely preserved during an explosion.     

Experimental designs in the optimisation of ultrasonic bath-acid-leaching procedures for the determination of trace elements in human hair samples by atomic absorption spectrometry

Experimental designs were used for the optimisation of acid-leaching procedures assisted by ultrasonic energy for the extraction of Ca, Cu, Fe, Mg, Mn and Zn from human hair samples. A Plackett-Burman 2(7) x 3/32 design for seven factors ([HNO3], [HCl], [H2O2], acid/oxidant solution volume, exposure time to ultrasounds, temperature of the ultrasonic bath and hair particle size) was used in order to choose the variables affecting the acid-leaching process. The variables [HNO3], [HCl] and temperature of the ultrasonic bath were found to be the most important parameters for the acid-leaching procedure, and these variables were optimised by a response surface design (central composite design 2(3) + star) which involved 16 experiments. Optimum values in the 3.7-4.2 M range were found for [HNO3], while optimum values between 3.0 and 3.5 M were found for [HCl]. The optimum temperature of the ultrasonic bath was between 80 and 90 degrees C. An acid digestion induced by microwave energy (details given) was used to obtain the total metal concentration and also for comparative purposes. Ca, Cu, Fe, Mg and Zn were measured by flame atomic absorption spectrometry (FAAS) using a conventional air/acetylene flame, while Mn was determined by electrothermal atomic absorption spectrometry (ETAAS) under optimised conditions. Two different reference materials, IAEA-085 International Atomic Energy Agency, Monaco) and NIES No. 13 (National Institute for Environmental Studies, Japan), with certified metal contents for some of the elements investigated, were used in order to verify the accuracy of the methods.