Experimental Study of Bite Mark Injuries by Digital Analysis

Abstract: This study was based on a morphometric analysis of bite marks starting from the quantitative definition of the anterior teeth by the geometric acquisition of the “injuries,” using bite marks impressed on pig skin and plastic. Each mark was photographed and acquired. A dedicated program automatically supplied the values of the shape factors and the areas of the pattern geometric figures. The values obtained for the homologous samples were compared to the heterologous values. Statistical comparison was made of the sets by linear regression, determining the correlation coefficient and the determination coefficient for each value. Results showed only 4.8% and 2% of overlap between homologous and heterologous values. This study was carried out in attempting to quantitatively define the anterior teeth of the human dentition and the procedure described and the results obtained support the advantage of morphometric studies and computer‐aided programs in this study of bite marks.     

The uniqueness of the human anterior dentition: a geometric morphometric analysis

The analysis of bitemarks has a significant bearing on forensic odontology and has attracted an increasingly sophisticated array of techniques in its evaluation. Two postulates underlie all bitemark analyses: firstly, that the characteristics of the anterior teeth involved in the bite are unique, and secondly, that this uniqueness is accurately recorded in the material bitten. Here, we investigate the question of the uniqueness of the anterior dentition. To do this, we use geometric morphometric techniques based on landmark and semilandmark data. The incisor and canine occlusal surfaces of 50 randomly selected orthodontic casts of young individuals (17-20 years) of both sexes form the material for this study. We analyzed the sizes of these teeth by means of landmark and semilandmark analysis to calculate Procrustes distances between tooth outlines. In order to analyze shape variation among individuals, we carried out principal components analyses on the partial warp scores. These are derived from Partial Procrustes coordinates aligned by means of thin-plate spline decomposition based on the bending energy matrix. The results indicate that there is no sexual dimorphism in the shape of the upper or lower arches. Plots of centroid size and first relative warps show less superposition among individuals than in shape analysis. This means that, when the size and shape are considered together, the difference between arches increases. Procrustes superimposition between the two individuals located most closely (0.0444) and the two most separated (0.1567) along the first axis of relative warp analyses show that individuals are not only differentiated by the relative position of their teeth but also by their arch shape. In conclusion, it appears that the incisal surfaces of the anterior dentition are in fact unique.     

咬痕个体识别的比对方法

目的 建立一个牙模数据库,为通过牙齿、咬痕进行个人识别的研究及其在法医实践中的应用提供一种新方法。方法 经过对400例牙模进行分析、计算,将牙齿的形状、排列转换成数字型(X,Y)坐标,通过计算出每颗牙关键点与坐标原点的相对位置,在DOS系统下运用Borland C++5.0语言编写程序,快速地计算出牙齿和牙弓的特征。结果 能对牙模进行自动识别,达到排除与认定。其比对精度长度为1.3mm,角度3°;可取的最少牙点位数目为12～14较为合理,大致需要5～7个完整的牙痕。结论 该方法是研究咬痕与牙模比对的基础。     

National survey of the incidence of missing anterior teeth: Potential use in bite mark analysis in the Brazilian context

Bite mark analysis in forensic dentistry presupposes that the human dentition is unique and that its characteristics can be transferred precisely to several materials. The aim of the present study was to register the frequency of missing anterior teeth in the Brazilian adult population, discussing its potential importance in bite mark analysis. Data from the Brazilian Oral Health Survey were used; 13,431 male and female individuals aged 35 to 44 were examined according to the criteria of the World Health Organization. The analysis of Poisson regression was performed in order to calculate the rating ratios and the respective confidence interval at 95%. A total of 13,431 adults participated in the study. Among male individuals, 2063 (47.00%) were dentate and 2036 (46.40%) had at least one missing tooth. Only 254 (5.83%) were totally edentulous. A significant number of males and females presented 6 missing teeth in the same dental arch, revealing the poor state of oral health of adult Brazilians. Missing teeth were more frequent in the upper dental arch than in the lower arch. In the upper dental arch, the incisor group (central and lateral) was missing the most. In the lower dental arch, however, a certain lack of homogeneity was observed among the different dental groups as regards missing teeth. White individuals presented a smaller proportion of missing teeth compared to the other ethnic groups. Females were 1.61 (CI 1.50–1.73) times more likely than males to present missing teeth. The absence of upper teeth and the presence of lower teeth were observed in 16.10% of the individuals. Further research should also include an analysis of different age groups. This would increase the potential of applying this kind of information to bite mark analysis.     

Age estimation in small children: reference values based on counts of deciduous teeth in Finns

The eruption of teeth in the mouth is suitable for age estimations during the period when teeth are actively emerging, in the deciduous dentition phase approximately from the age of 6 months to 2.5 years. Estimations of age can be performed simply by counting the number of teeth in the mouth. Reliability of the estimates depends on the reference data available and each population group should preferably have its own standards. In the present study timing of eruption of successive deciduous teeth was studied longitudinally in 129 Finns. The dates of clinical eruption of deciduous teeth were recorded by mothers and checked by dentists. In 40 of the 129 children emergence ages of at the most the four last teeth were based only on semiannual registrations performed by dentists. The main purpose was to provide normal timetables of tooth eruption in small children in forms that are practical in estimations of dental age. No sexual dimorphism existed in the timing of clinical eruption of successive deciduous teeth. The mean age corresponding to the presence of one tooth in the mouth was 7.1 months (S.D.=1.78) and that corresponding to tooth count 19 was 27.8 months (S.D.=3.99). If the chronological age is known, the presented distributions and means with variations make it possible to estimate the degree of advancement or delay in a child’s dental development. If the age of the child is not known, the mean and median ages can be used for estimations of chronological age. However, estimations of age should not be based only on tooth counts because of marked variation also within this homogeneous group.     

A survey of the incidence of missing anterior teeth: potential value in bite mark analysis.

Bite mark analysis involves comparison of individual dental characteristics between a dentition and the bite injury. A bite mark injury may result from sexual assault, or physical assault, and defensive injuries, and as such can be used to link a suspect to a victim or vice versa. Missing teeth are one of the characteristics that could implicate or exclude a suspected biter. However frequency data for use by forensic odontologists can only be collated from epidemiological studies. Therefore an audit was undertaken of missing anterior teeth in adult patients (n = 1010) attending for treatment, gathering data that could be more relevant to odontology. One in five of the sample presented with missing teeth that were either replaced with a denture (11%), not replaced (6%) or missing with the gap closed (2%).     

Yet another method for marking incisal edges of teeth for bitemark analysis

Over the years many methods have been proposed and presented for marking or "highlighting" the incisal edges of anterior teeth on a dental stone model -- one of the critical steps in production of transparent overlays for bitemark analysis. A method is presented here that is an extension and refinement of the "paint the edges" method shown at least as early as 1966 by Gustafson. This method uses "invisible ink" and ultraviolet illumination to produce a very high contrast image of the incisal edges of the teeth on the model. The advantages of this new method are that it is nondestructive, it does not leave visible marks on the models, operator subjectivity in selecting the portions of anterior teeth to be highlighted is reduced, and the author submits that this technique lends itself to easy construction of overlays using computer image-processing software such as Adobe Photoshop and ImageJ.     

Statistical evidence for the individuality of the human dentition

A general population sample of bite marks in wax is used to demonstrate mathematically the individuality of the human dentition. The general principles of probability are discussed and applied to the analysis of teeth using a precise method of measurement. The unique nature of the human dentition is confirmed.     

A Bayesian approach to estimate skeletal age-at-death utilizing dental wear

In the forensic context, teeth are often recovered in mass disasters, armed conflicts, and mass graves associated with human rights violations. Therefore, for victim identification, techniques utilizing the dentition to estimate the first parameters of identity (e.g., age) can be critical. This analysis was undertaken to apply a Bayesian statistical method, transition analysis, based on the Gompertz-Makeham (GM) hazard model, to estimate individual ages-at-death for Balkan populations utilizing dental wear. Dental wear phases were scored following Smith's eight-phase ordinal scoring method and chart. To estimate age, probability density functions for the posterior distributions of age for each tooth phase are calculated. Transition analysis was utilized to generate a mean age-of-transition from one dental wear phase to the next. The age estimates are based on the calculated age distribution from the GM hazard analysis and the ages-of-transition. To estimate the age-at-death for an individual, the highest posterior density region for each phase is calculated. By using a Bayesian statistical approach to estimate age, the population's age distribution is taken into account. Therefore, the age estimates are reliable for the Balkan populations, regardless of population or sex differences. The results showed that a vast amount of interpersonal variation in dental wear exists within the current sample and that this method may be most useful for classifying unknown individuals into broad age cohorts rather than small age ranges.     

牙齿结构变化图像分析测量指标与个体年龄相关性的研究

用图像分析法对牙齿结构变化指标与个体年龄相关性进行研究,所用牙齿标本均取自香港大学口腔生物中心牙库,共得到人体牙齿842颗,标本来源的个体年龄范围为13～84岁,采用Kontron电子计算机图像分析仪直接测量法进行各牙齿标本的外表和切片检查,检查所得数据均输入电子计算机数据库软件,并使用社会科学统计专用软件包(spss)进行相关性分析。结果表明,与个体年龄相关性较好的指标依次为TP2’,S2,T2’,EP,TCI等,如按牙齿类型分类,与个体年龄相关性较好的指标为:T2’,S2’,TCI等(切牙与尖牙类),CCP’,EP’,E’等(前磨牙类),TP2’,S2’,EPWNL’等(磨牙类)。     

Computer-based production of comparison overlays from 3D-scanned dental casts for bite mark analysis

Bite mark analysis assumes the uniqueness of the dentition can be accurately recorded on skin or an object. However, biting is a dynamic procedure involving three moving systems, the maxilla, the mandible, and the victim's reaction. Moreover, bite marks can be distorted by the anatomic location of the injury or the elasticity of the skin tissue. Therefore, the same dentition can produce bite marks that exhibit variations in appearance. The complexity of this source of evidence emphasizes the need for new 3D imaging technologies in bite mark analysis. This article presents a new software package, DentalPrint (2004, University of Granada, Department of Forensic Medicine and Forensic Odontology, Granada, Spain) that generates different comparison overlays from 3D dental cast images depending on the pressure of the bite or the distortion caused by victim-biter interaction. The procedure for generating comparison overlays is entirely automatic, thus avoiding observer bias. Moreover, the software presented here makes it impossible for third parties to manipulate or alter the 3D images, making DentalPrint suitable for bite mark analyses to be used in court proceedings.     

A comparison of the ability of experts and non-experts to differentiate between adult and child human bite marks using receiver operating characteristic (ROC) analysis

Fifty colour prints of human bite marks were sent to 109 observers who were asked to decide using a six point rating scale, whether the marks had been produced by the teeth of an adult or a child. The observers consisted of accredited senior forensic dentists, accredited junior forensic dentists, general dental practitioners, final year dental students, police officers and social workers. The results were compared against a “gold standard” which was the actual verdict from the case. Comparison of the results between the groups of observers and the standard was made using Receiver Operating Characteristics (ROC) methodology. The best decisions were made by senior/junior experts or final year dental students. General dental practitioners and police officers were least able to differentiate correctly between adult and child bite marks. The effect of training is important and its effects need to be assessed in more detail in future studies.     

Reconstruction of Deformed Bite Marks Using Affine Transformations

Abstract: Bite marks inflicted on animate and inanimate objects will undergo a certain degree of deformation. This fact remains one of the biggest stumbling blocks when analyzing evidence for court presentation. It has been demonstrated that the reliability of pattern association analysis will not be affected by minimal degrees of warping, shrinkage, and distortion. In this study, affine transformations were applied to bite marks to establish if minimal distortions would affect the mathematically determined relationships of the defined features. In a real case study, it was then tested whether the distorted bite mark matched the dentition of the perpetrator by applying an affine transformation. This was confirmed to be the case. Affine transformations will thus not affect the relationships of the individual features found in bite marks. The numerical calculations validate the reliability of pattern association analysis in the presence of minimal amounts of warping, shrinkage, and distortion.     

Tooth eruption times of permanent teeth in male and female adolescents in Niedersachsen

The aim of this study was to determine the eruption times of permanent teeth, excluding third molars, in a defined area population of a country district in Lower Saxony. The authors investigated 2495 oral findings of 664 patients (male 315, female 349) in a longitudinal study. The minimum age was 3.00 years and the maximum age 24.00 years. The dental findings were collected over a period of about 20 years (1980-2002). The oral findings per child/adolescent were assessed between one and 16 times. The eruption times of teeth in females are earlier than those for the same teeth in males. Further, the permanent dentition in females is completed earlier than in males. The tooth eruption occurs symmetrically in both jaws. The comparison of both jaws revealed a slightly advanced eruption of the lower jaw teeth for both sexes. There is a noteworthy change in the eruption sequence of the teeth. In contrast to other reports we determined that the eruption of the canine proceeds the eruption of the second premolar. We found no acceleration of the dentition when compared to other reports and confirmed the rules of tooth eruption in man. Oral examination of teeth is a simple tool to calculate tooth eruption intervals. This first investigation on a population of Lower Saxony revealed a change in the eruption sequence of permanent teeth. The findings are relevant for dental treatment planning and should be reconfirmed at certain intervals.     

An elliptical incised wound of the breast misinterpreted as a bite injury

Bite injuries upon homicide victims are most often initially identified by the forensic pathologist during the course of the autopsy examination. Following such recognition, the injury or photographs of the traumatized site are then referred to a forensic odontologist for his or her examination, further characterization, and subsequent comparison with any suspect's dentition. However, if the pathologist misidentifies an injury caused by another mechanism as a human bite, this mistake can potentially be perpetuated by the dental consultant, since relatively few dentists regularly examine traumatic injuries other than those arising from bites. To illustrate such an event, a case is presented involving an incised wound of the breast, which was originally identified as an avulsive bite wound. Detailed examination by two odontologic consultants confirmed the wound as having been caused by human teeth, and further, they related the "bite injury" to a specific individual. The bite injury interpretation represented the only scientific evidence implicating the suspect at a subsequent trial for capital murder. Later examination of the tissues and photographs by a forensic pathologist and another dental consultant revealed that the injury was not due to human dentition, but rather resulted from a sharp-edged instrument. These consultants conducted a unique experiment to reduplicate the injury and prove its causation. This information was presented to the jury during the suspect's trial and resulted in his acquittal on all charges.     

Bite mark documentation and analysis: the forensic 3D/CAD supported photogrammetry approach

Bite mark identification is based on the individuality of a dentition, which is used to match a bite mark to a suspected perpetrator. This matching is based on a tooth-by-tooth and arch-to-arch comparison utilising parameters of size, shape and alignment. The most common method used to analyse bite mark are carried out in 2D space. That means that the 3D information is preserved only two dimensionally with distortions. This paper presents a new 3D documentation, analysis and visualisation approach based on forensic 3D/CAD supported photogrammetry (FPHG) and the use of a 3D surface scanner. Our photogrammetric approach and the used visualisation method is, to the best to our knowledge, the first 3D approach for bite mark analysis in an actual case. The documentation has no distortion artifacts as can be found with standard photography. All the data are documented with a metric 3D measurement, orientation and subsequent analysis in 3D space. Beside the metrical analysis between bite mark and cast, it is possible using our method to utilise the topographical 3D feature of each individual tooth. This means that the 3D features of the biting surfaces and edges of each teeth are respected which is--as shown in our case--very important especially in the front teeth which have the first contact to the skin. Based upon the 3D detailed representation of the cast with the 3D topographic characteristics of the teeth, the interaction with the 3D documented skin can be visualised and analysed on the computer screen.     

The Response of Skin to Applied Stress: Investigation of Bitemark Distortion in a Cadaver Model*

Abstract: Knowledge of distortional properties of skin is important in bitemark analysis. Thus, the response of skin to stress from bites was investigated. Four sets of models were created from the dentition of one individual. Anterior teeth were systematically removed to vary contact surface area. A biting apparatus was constructed with an integrated load cell. Forty‐six bites were created perpendicular to Langer lines on six cadavers. Rate of force application and bite pressure were controlled. Metric/angular measurement and hollow volume overlays were employed. Distortion produced by each dentition was calculated and assessed. Results showed that as teeth impressed loose tissue, mesial/distal distance increased, angles of rotation flattened, and inter‐canine distance lengthened. An opposite effect was seen in tight tissue. When the surface area of the dentition was reduced, a mixture of these effects was observed. Conclusions indicated that stiffness of the tissue was the most important variable in bitemark distortion.     

Age estimation in small children: reference values based on counts of deciduous teeth in Finns

The eruption of teeth in the mouth is suitable for age estimations during the period when teeth are actively emerging, in the deciduous dentition phase approximately from the age of 6 months to 2.5 years. Estimations of age can be performed simply by counting the number of teeth in the mouth. Reliability of the estimates depends on the reference data available and each population group should preferably have its own standards. In the present study timing of eruption of successive deciduous teeth was studied longitudinally in 129 Finns. The dates of clinical eruption of deciduous teeth were recorded by mothers and checked by dentists. In 40 of the 129 children emergence ages of at the most the four last teeth were based only on semiannual registrations performed by dentists. The main purpose was to provide normal timetables of tooth eruption in small children in forms that are practical in estimations of dental age. No sexual dimorphism existed in the timing of clinical eruption of successive deciduous teeth. The mean age corresponding to the presence of one tooth in the mouth was 7.1 months (S.D.=1.78) and that corresponding to tooth count 19 was 27.8 months (S.D.=3.99). If the chronological age is known, the presented distributions and means with variations make it possible to estimate the degree of advancement or delay in a child's dental development. If the age of the child is not known, the mean and median ages can be used for estimations of chronological age. However, estimations of age should not be based only on tooth counts because of marked variation also within this homogeneous group.     

An integrated technique for the analysis of skin bite marks

The high number of murder, rape, and child abuse cases in South Africa has led to increased numbers of bite mark cases being heard in high courts. Objective analysis to match perpetrators to bite marks at crime scenes must be able to withstand vigorous cross-examination to be of value in conviction of perpetrators. An analysis technique is described in four stages, namely determination of the mark to be a human bite mark, pattern association analysis, metric analysis and comparison with the population data, and illustrated by a real case study. New and accepted techniques are combined to determine the likelihood ratio of guilt expressed as one of a range of conclusions described in the paper. Each stage of the analysis adds to the confirmation (or rejection) of concordance between the dental features present on the victim and the dentition of the suspect. The results illustrate identification to a high degree of certainty.