Refreshing the Aged Latent Fingerprints with Ionizing Radiation Prior to the Cyanoacrylate Fuming Procedure: A Preliminary Study

One of the crucial factors determining the cyanoacrylate deposit quality over latent fingerprints appeared to be the extent of the humidity. This work focuses on the enhancement/refreshment of age‐degraded latent fingerprints by irradiating the samples with UV, X‐ray, or thermal neutrons prior to the cyanoacrylate (CA) fuming. Age degradation of latent fingerprints deposited on glass surfaces was examined through the decrease in the number of characteristic minutiae counts over time. A term “critical day” was introduced for the time at which the average number of identifiable minutiae definitions drops to one‐half. Fingerprints older than their “critical day” were exposed to either UV, X‐ray, or thermal neutrons. Identical reference samples were kept unexposed. All samples, both reference and irradiated, were developed during a single CA fuming procedure. Comparative latent fingerprint analysis showed that exposure to ionizing radiation enhances the CA fuming, yielding a 20‐30% increase in average minutiae count.     

胺端基型CdS／PAMAM潜在显现指印的应用

目的探索一种新型纳米荧光材料的制备方法及其在潜在指印显现方面的应用前景。方法以聚酰胺-胺（PAMAM）树形分子为模板，原位合成CdS纳米簇。并使用荧光光谱法对产物进行表征：应用这种新型荧光材料对多种客体表面、不同陈旧程度的潜在指印进行显现．并将显现结果与传统荧光染料进行比对。结果该荧光材料在365nm紫外光激发下可以发出很强的可见荧光：与传统的荧光染料相比。-NH2端基型CdS／PA—MAM可以同指印残留物进行靶向结合．其荧光强度高、背景干扰小，指印纹线与客体反差大。结论-NH2端基型CdS／PAMAM可以有效地显出非渗透性客体表面的潜在指EP。     

PAMAM G7.0的制备及在非渗透性表面手印显现中的应用

目的探索一种非渗透性表面手印显现的新方法。方法根据现有方法合成第七代聚酰胺-胺（PAMAM G7.0）树形分子材料,并使用荧光光谱法对产物进行荧光测试;将合成材料对多种客体表面、不同遗留时间的手印进行显现,并将显现结果与粉末法和传统的荧光染料法进行比对。结果实验表明该荧光材料在365nm光激发下可以发出较强的可见荧光;与粉末法和传统的荧光染料法相比,PAMAM G7.0可以同手印残留物进行高选择性结合,手印纹线与背景之间的反差大。结论PAMAMG7.0可以有效地显出非渗透性客体表面的手印。     

Visualization of latent fingerprints using fluorescence lifetime imaging on paper emitting strong fluorescence

Latent fingerprints were successfully visualized using fluorescence lifetime imaging (FLIM) on paper which emits strong fluorescence with a lifetime close to that of fingerprints and thus from which it is difficult for time-resolved spectroscopy to visualize fingerprints. Latent fingerprint samples on paper were excited using a 450 nm or 532 nm nanosecond pulsed-laser, and time-resolved fluorescence images were obtained at a delay time of 6–16 ns in intervals of 1 ns, to the excitation pulse. The excitation beam was expanded using a lens, and the fluorescence from the fingerprints was captured using an intensified CCD camera. Because of the large fluorescence intensity of the background paper of approximately two to four orders of magnitude larger than that of the fingerprint, the fingerprint was not visualized on each fluorescence image by time-resolved spectroscopy. However, the fingerprint was visualized in a FLIM image constructed using a series of the fluorescence images for the case with the fluorescence intensity of the background paper being four orders of magnitude larger than that of the fingerprint. The difference in fluorescence lifetime in the FLIM image of the visualized fingerprint and background paper was in the order of 0.1 ns, which was an order of magnitude smaller than the inherent fluorescence lifetime of a few nanoseconds for the fingerprints and paper. It was demonstrated that, at a background fluorescence intensity with a certain order of magnitude larger than that of fingerprints, FLIM has the potential to visualize latent fingerprints which cannot be visualized by time-resolved spectroscopy.     

Optimization and initial evaluation of 1,2-indandione as a reagent for fingerprint detection

1,2-Indandione has been used to develop fluorescent fingerprints on porous materials such as paper. The compound reacts with amino acid residues to produce highly fluorescent fingerprint ridges. An optimized formulation and treatment protocol for using the reagent is presented here. The reagent is applied as a solution in HFE7100 containing acetic acid and ethyl acetate. Treated articles are heated at 100 degrees C for 10 min at ambient humidity and stored in the dark before recording the fingerprints using fluorescence photography or digital imaging. Photodecomposition of the fluorescent fingerprints has been observed. Storage in the dark reduces degradation, extending the lifetime of the fingerprints. Other chemical methods to stabilize the fingerprints proved unsuccessful. Comparisons of the performance of 1,2-indandione with DFO in CFC113 performed on a limited range of substrates indicated that the reagent might be an effective method for the development of latent fingerprints despite the new reagent producing less intense fluorescence.     

Fluorescence spectra and images of latent fingerprints excited with a tunable laser in the ultraviolet region

Fluorescence spectra of sebum-rich latent fingerprints were studied with a tunable laser for non-destructive fingerprint detection without chemical treatment. The tunable laser consists of a nanosecond pulsed Nd-YAG laser and an optical parametric oscillator (OPO) crystal. The fluorescence spectra and images were measured at various excitation wavelengths in the ultraviolet region by the time-resolved fluorescence method. We have previously reported that a typical fluorescence spectrum of fingerprints consists of two peaks located at c. 330 and 440 nm. In order to determine the wavelength of optimal excitation, excitation spectra were measured at wavelengths ranging from 220 to 310 nm. The fluorescence intensity of the 330 nm peak became maximal with excitation at 280 nm. The images of latent fingerprints on white papers were also measured and the clearest image was obtained with excitation at 280 nm. The influence of continuous irradiation on the fluorescence of fingerprints was measured at the optimal excitation wavelengths. The 330 nm peak was strong at first and decreased with continuous irradiation, whereas the 440 nm peak, which was weak at first, increased gradually.     

The Effects of High Dynamic Range on Fingerprint Images Processed by Photoshop

High dynamic range (HDR) imaging is a function that combines five images with different exposures into a single image. This technique may provide fine ridge details of fingerprint images for forensic latent fingerprint examination. Therefore, viewing fingerprints under optimal conditions is of paramount importance. This paper analyzes HDR and non‐HDR photos by using the Michelson contrast formula. The Michelson formula will provide a measurement to determine whether better contrast between the background and print can be achieved using the HDR function and if the background color affects the quality of the images. Two hypothesis were tested: (i) the HDR image provides more details of fingerprints with a better tone, greater clarity, and contrast than a normally exposed image regardless of the background color; (ii) the background color does not affect the quality of HDR fingerprint images overall, but the multi‐color background may increase the contrast of HDR fingerprint images in some cases.     

The spectroscopic detection of exogenous material in fingerprints after development with powders and recovery with adhesive lifters

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. The powders adhere to the ridge pattern of the fingerprint only, thus allowing the image to be visualised. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes to facilitate subsequent laboratory analysis. As with all recovered evidence these samples would be stored in evidence bags to allow secure transit from the scene to the laboratory and also to preserve the chain of evidence. In this paper, the application of Raman spectroscopy for the analysis of exogenous material in latent fingerprints is reported for contaminated fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. A selection of over the counter (OTC) analgesics were used as samples for the analysis and contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. In most cases background fluorescence attributed to the sebaceous content of the latent fingerprint was reduced by the application of the powder thus reducing spectral interference. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis of exogenous contaminants by Raman spectroscopy. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised in any way. Although the application of powders did not interfere with the detection process the time taken to locate the contaminant was increased due to the physical presence of more material within the fingerprint. The presence of interfering Raman bands from lifting tapes is another potential complication. This, however, could be removed by spectral subtraction or by the choice of lifting tapes that have only weak Raman bands.     

A Noninvasive and Speculative Method of Visualizing Latent Fingerprint Deposits on Thermal Paper

Latent fingerprint deposits on thermal paper have been visualized noninvasively at visible wavelengths when illuminated with a UV‐A light source (peak 365 nm). A higher intensity UV source (250 W/m² at 0.38 m) gave superior fingerprint visibility when compared with a 60 W/m² (at 0.4 m) source. Removing the visible (blue) component of the light source emission did not adversely affect the visibility of the fingerprint. Sample fingerprints from 100 donors, when examined 24 h after deposition, produced identifiable fingerprints from nearly 34% of fingerprint deposits. A mechanism for the observed visibility is proposed based on low emission of visible wavelengths from areas of thermal paper coincident with the fingerprint deposit, when illuminated with UV. This is likely due to a weak color change in the thermal paper dye arising from protonated amino acid components of the sweat. This effect was not observed on nonthermal paper.     

Microwave Selective Thermal Development of Latent Fingerprints on Porous Surfaces: Potentialities of the Method and Preliminary Experimental Results

The thermal development of latent fingerprints on paper surfaces is a simple, safe, and chemicals‐free method, based on the faster heating of the substrate underlying the print residue. Microwave heating is proposed for the first time for the development of latent fingerprints on cellulose‐based substrate, in order to add to the thermal development mechanism the further characteristic of being able to heat the fingerprint residues to a different extent with respect to the substrate, due to the intrinsic difference in their dielectric properties. Numerical simulation was performed to confirm and highlight the selectivity of microwaves, and preliminary experimental results point out the great potentialities of this technique, which allowed developing both latent sebaceous‐rich and latent eccrine‐rich fingerprints on different porous surfaces, in less than 30 sec time with an applied output power of 500 W. Microwaves demonstrated more effectiveness in the development of eccrine‐rich residues, aged up to 12 weeks.     

Fluorescence of 1,2‐Indanedione with Amino Acids Present in the Fingerprint Residue: Application in Gender Determination

1,2‐indanedione is used for latent fingerprint visualization on porous surfaces. In this paper, fluorescence spectra of 1,2‐indanedione after reacting with 21 individual amino acids present in latent fingerprints residue were measured in water‐methanol solutions. The fluorescence intensity depends on the amino acid used, while the fluorescence peak does not change much. The concentration of amino acids in fingerprint residue in females is almost the double of their concentration in males. This property combined with fluorescence of 1,2‐indanedione‐amino acids compounds is used for gender determination, by comparing the fluorescence intensity peaks in the same experimental conditions. In this preliminary study, the fluorescence signal from the samples representing females was almost two times the signal for samples representing males. In addition to the reduction by almost 50% of the number of suspects in a criminal research case, these results could be helpful in gaining some knowledge about the papillary residue composition.     

水溶性碲化镉量子点溶液显现血潜指纹

目的建立巯基丁二酸修饰的水溶性碲化镉量子点溶液（MSA/CdTe QDs）显现多种客体表面的血潜指纹的方法。方法利用量子点对人体血液成分的特异性标识作用,365nm紫外光激发使其荧光显像。结果 MSA/CdTe溶液显现时间显著短于文献报导的同类方法;显现效果和灵敏度优于显现血潜指纹常用试剂四甲基联苯胺和氨基黑10B。结论水溶性MSA/CdTe溶液适于显现多种客体表面的血潜指纹,效果优异。     

The application of infrared chemical imaging to the detection and enhancement of latent fingerprints: method optimization and further findings

Fourier transform infrared (FTIR) chemical imaging allows the collection of fingerprint images from backgrounds that have traditionally posed problems for conventional fingerprint detection methods. In this work, the suitability of this technique for the imaging of fingerprints on a wider range of difficult surfaces (including polymer banknotes, various types of paper, and aluminum drink cans) has been tested. For each new surface, a systematic methodology was employed to optimize settings such as spectral resolution, number of scans, and pixel aggregation in order to reduce collection time and file-size without compromising spatial resolution and the quality of the final fingerprint image. The imaging of cyanoacrylate-fumed fingerprints on polymer banknotes has been improved, with shorter collection times for larger image areas. One-month-old fingerprints on polymer banknotes have been successfully fumed and imaged. It was also found that FTIR chemical imaging gives high quality images of cyanoacrylate-fumed fingerprints on aluminum drink cans, regardless of the printed background. Although visible and UV light sources do not yield fingerprint images of the same quality on difficult, nonporous backgrounds, in many cases they can be used to locate a fingerprint prior to higher quality imaging by the FTIR technique. Attempts to acquire FTIR images of fingerprints on paper-based porous surfaces that had been treated with established reagents such as ninhydrin were all unsuccessful due to the swamping effect of the cellulose constituents of the paper.     

Development of Latent Fingerprints on Thermal Paper by the Controlled Application of Heat

Apparatus to produce a spatially and temporally uniform heat source is described and this is used to visualize latent fingerprints deposited onto thermal paper by raising the temperature of the paper. Results show an improvement over previous research when fingerprint deposits are aged or the developed fingerprints faint; visualization being enhanced by the use of a blue LED light source of 465 nm peak wavelength. An investigation of the components in fingerprint sweat likely to affect the solubility and hence color change of the dye present in the thermal paper has shown that polar protic solvents able to donate a proton are favored and a polar amino acid found commonly in eccrine fingerprint sweat (lysine) has been shown able to produce the desired color change. Aged fingerprint deposits on thermal paper from a variety of sources up to 4 years old have been visualized with this technique.     

血手印显现的实验研究

目的 提出了采用荧光显现试剂显现血手印的新方法。方法 在比较使用联苯胺及其衍生物显现血手印的同时,实验了通过强氧化剂破坏血红素、沉淀珠蛋白,采用激活血痕、蛋白染色的方法,使血手印清晰显出。结果 显现效果不受客体表面颜色的影响,不受血手印遗留时间的影响。结论 适用客体范围广,灵敏度高。     

Enhancement of Latent Fingerprints on Fabric Using the Cyanoacrylate Fuming Method Followed by Infrared Spectral Mapping

A method has been developed for the visualization of latent fingerprints on fabrics, which is based upon cyanoacrylate (superglue) fuming followed by imaging using an infrared microscope. Results show that imaging on smooth, shiny fabrics such as polyester, silk, nylon, and acetate of different colors and patterns can give an improvement over existing enhancement methods. Results for cotton and polycotton were less successful and it is thought this may be due a combination of the presence of the carbonyl functional group in these fabrics as well as their absorbency to fingerprint sweat. The carbonyl peak (1700 cm^?1) provided the optimum spectroscopic feature to map and image a fingerprint. Comparisons between infrared mapping at a specific frequency range and principal component analysis showed that improved imaging was obtained with principal component analysis.     

新型亲油性纳米二氧化硅粉末在手印显现中的应用

目的 比较新型亲油性纳米二氧化硅粉末显现手印的效果.方法 应用亲油性纳米二氧化硅粉末与现场勘查箱内金粉、银粉和黑色磁性粉显现非渗透性客体表面油汗混合手印,并在自然光下观察比较显现效果.结果 亲油性纳米二氧化硅粉末显现出的手印图像纹线清晰连贯,背景反差好.结论 亲油性纳米二氧化硅粉末显现手印具有一定的优势.     

Changes in the lipid composition of latent fingerprint residue with time after deposition on a surface

The work described in this report was focused on generating increased knowledge of fingerprint chemistry, particularly the composition of a latent fingerprint at the time it is deposited, and the chemical changes in lipid components that occur over time. Fingerprints from five male donors (aged 25-34 years) were collected and aged under controlled conditions. The prints were then sampled at set intervals, solvent extracted with dichloromethane, co-derivatized with MSTFA and analyzed by gas chromatography-mass spectrometry (GC-MS). It was shown that there was loss of squalene from prints stored in the light or in the dark. Loss was more rapid in the light, with squalene in prints from some donors not detected after 9 days storage. For these same donors, squalene was still detected after 33 days storage in the dark, but at much lower levels than in fresh prints. For saturated fatty acids (tetradecanoic, palmitic and stearic acid) there was a trend towards an increase in levels of these substances during storage (up to about 20 days) followed by a decrease back to original levels or below. This was the case for samples stored in the light or in the dark. For palmitoleic acid, a similar trend was seen. For oleic acid, this trend was seen for samples stored in the dark. For samples stored in the light the general trend was a decrease in level over the storage period (up to 33 days).     

502胶控制湿度贴显法显现皮革面上手印

目的　研究皮革面上汗潜手印的显现。方法　通过对遗留在皮革面不同时间的指印采用常规熏显、自然贴附、控制湿度贴附三种方法进行处理并比较效果。结果　控制湿度贴附显现法在皮革面上显现的成功率高于效果明显常规熏显法和自然贴附法。结论　为皮革面上手印的显现提供了一种新的方法     

A Modified Electrostatic Adsorption Apparatus for Latent Fingerprint Development on Unfired Cartridge Cases

Visualization of latent fingerprints on metallic surfaces by the method of applying electrostatic charging and adsorption is considered as a promising chemical‐free method, which has the merit of nondestruction, and is considered to be effective for some difficult situations such as aged fingerprint deposits or those exposed to environmental extremes. In fact, a portable electrostatic generator can be easily accessible in a local forensic technology laboratory, which is already widely used in the visualization of footwear impressions. In this study, a modified version of this electrostatic apparatus is proposed for latent fingerprint development and has shown great potential in visualizing fingerprints on metallic surfaces such as cartridge cases. Results indicate that this experimental arrangement can successfully develop aged latent fingerprints on metal surfaces, and we demonstrate its effectiveness compared with existing conventional fingerprint recovery methods.