3,4-Methylenedioxymethamphetamine (MDMA) and other amphetamine derivatives

As various substances of abuse come under Drug Enforcement Administration (DEA) Schedule restrictions, slightly modified derivatives (designer drugs) replace them. A series of amphetamine derivatives are discussed in this presentation. Applicable analytical methods are presented. Details of cases handled by the office (hospital patients, driving while under the influence/driving under the influence of drugs [DWI/DUID], and medical examiner cases) are discussed.     

Thermal development of latent fingermarks on porous surfaces—Further observations and refinements

In a further study of the thermal development of fingermarks on paper and similar surfaces, it is demonstrated that direct contact heating of the substrate using coated or ceramic surfaces at temperatures in excess of 230 °C produces results superior to those obtained using hot air. Fingermarks can also be developed in this way on other cellulose-based substrates such as wood and cotton fabric, though ridge detail is difficult to obtain in the latter case. Fluorescence spectroscopy indicates that the phenomena observed during the thermal development of fingermarks can be reproduced simply by heating untreated white copy paper or filter paper, or these papers treated with solutions of sodium chloride or alanine. There is no evidence to suggest that the observed fluorescence of fingermarks heated on paper is due to a reaction of fingermark constituents on or with the paper. Instead, we maintain that the ridge contrast observed first as fluorescence, and later as brown charring, is simply an acceleration of the thermal degradation of the paper. Thermal degradation of cellulose, a major constituent of paper and wood, is known to give rise to a fluorescent product if sufficient oxygen is available [1], [2], [3], [4], [5]. However, the absence of atmospheric oxygen has only a slight effect on the thermal development of fingermarks, indicating that there is sufficient oxygen already present in paper to allow the formation of the fluorescent and charred products. In a depletion study comparing thermal development of fingermarks on paper with development using ninhydrin, the thermal technique was found to be as sensitive as ninhydrin for six out of seven donors. When thermal development was used in sequence with ninhydrin and DFO, it was found that only fingermarks that had been developed to the fluorescent stage (a few seconds of heating) could subsequently be developed with the other reagents. In the reverse sequence, no useful further development was noted for fingermarks that were treated thermally after having been developed with ninhydrin or DFO. Aged fingermarks, including marks from 1-year-old university examination papers were successfully developed using the thermal technique.     

The thermal visualisation of latent fingermarks on metallic surfaces

Recent published research has lead to improved techniques for recovering latent fingermarks from metallic surfaces. The present study corroborates and extends some of the work carried out by Bond [1], [2], [3], but an alternative mechanism is proposed for the thermal visualisation of fingermarks based on differential oxidation and the production of interference colours that improve contrast. Fingermarks treated at low temperature could be reheated to enhance recovery, but an upper temperature limit occurs beyond which the mark degrades. The mechanism of enhancement is discussed.     

The Effect of Decalcifying Solutions on Hemosiderin Staining

Abstract: To determine whether routine decalcification may reduce the amount of stainable iron that is visible on tissue sections, samples of liver and lung tissue with excessive iron stores were placed in three standard decalcifying solutions (i) formic acid [33%], formaldehyde [4%], and NaCl [0.85%]; (ii) formic acid [30%], formaldehyde [4%], and water; and (iii) nitric acid [5%] for 24, 48, 72, and 96 h. After exposure to the decalcifying solutions, the tissues were stained with Perls stain. The slides were examined blind and the intensity of iron staining was scored semiquantitatively from 0 to 3+. The trend in all samples over the course of the experiment (96 h) was for reduction in the intensity of hemosiderin staining. As the amount of stainable hemosiderin in tissues may be significantly altered by decalcification, the absence of hemosiderin in tissues adjacent to a fracture site does not necessarily indicate that the injury was acute.     

Under the surface: the dynamic interpersonal and affective world of psychopathic high-security and detention prisoners

The present study yields an in-depth examination of the interpersonal and affective world of high-security and detention prisoners with possible (Psychopathy Checklist: Screening Version [PCL:SV] ≥ 13) and strong (PCL:SV ≥ 18) indications of psychopathy. A group of male inmates (n = 16) was compared with noncriminal and non-personality disordered controls (n = 35) on measures of self and other (Young Schema Questionnaire-Short Form [YSQ-SF], Inventory of Interpersonal Problems-Circumplex Scales [IIP-C]), and the experience and regulation of affect (Positive and Negative Affect Schedule [PANAS], Emotion Control Questionnaire 2 [ECQ2]). Results confirm the established grandiose, dominant, and callous characteristics of the psychopath (PCL:SV, Structured Clinical Interview for DSM-IV Axis II Disorders [SCID-II], DSM-IV and ICD-10 Personality Questionnaire [DIP-Q], IIP-C), while demonstrating personal distress and important nuances and variations in psychopathic offenders' interpersonal and affective functioning (YSQ-SF, PANAS, ECQ2, SCID-II, DIP-Q). These preliminary findings support, expand, and challenge the ordinary portrayal of the psychopath and, if replicated in larger samples, point to a need for an expansion or reformulation of the concept, measurement, and treatment of psychopathy.     

Identification of forensically important sarcophagid flies (Diptera: Sarcophagidae) in China, based on COI and 16S rDNA gene sequences

Insects attracted to cadavers may provide important indications of the postmortem interval (PMI). However, use of the flesh flies (Diptera: Sarcophagidae) for PMI estimation is limited as the species are often not morphologically distinct, especially as immatures. In this study, 23 forensically important flesh flies were collected from 13 locations in 10 Chinese provinces. Then, a 278-bp segment of the cytochrome oxidase subunits one (COI) gene and a 289-bp segment of the 16S rDNA gene of all specimens were successfully sequenced. Phylogenetic analysis of the sequenced segments showed that all sarcophagid specimens were properly assigned into four species (Boerttcherisca peregrina [Robineau-Desvoidy, 1830], Helicophagella melanura [Meigen, 1826], Parasarcophaga albiceps [Meigen, 1826], and Parasarcophaga dux [Thompson, 1869]) with relatively strong supporting values, thus indicating that the COI and 16S rDNA regions are suitable for identification of sarcophagid species. The difference between intraspecific threshold and interspecific divergence confirmed the potential of the two regions for sarcophagid species identification.     

Experimental designs in the optimisation of ultrasonic bath-acid-leaching procedures for the determination of trace elements in human hair samples by atomic absorption spectrometry

Experimental designs were used for the optimisation of acid-leaching procedures assisted by ultrasonic energy for the extraction of Ca, Cu, Fe, Mg, Mn and Zn from human hair samples. A Plackett-Burman 2(7) x 3/32 design for seven factors ([HNO3], [HCl], [H2O2], acid/oxidant solution volume, exposure time to ultrasounds, temperature of the ultrasonic bath and hair particle size) was used in order to choose the variables affecting the acid-leaching process. The variables [HNO3], [HCl] and temperature of the ultrasonic bath were found to be the most important parameters for the acid-leaching procedure, and these variables were optimised by a response surface design (central composite design 2(3) + star) which involved 16 experiments. Optimum values in the 3.7-4.2 M range were found for [HNO3], while optimum values between 3.0 and 3.5 M were found for [HCl]. The optimum temperature of the ultrasonic bath was between 80 and 90 degrees C. An acid digestion induced by microwave energy (details given) was used to obtain the total metal concentration and also for comparative purposes. Ca, Cu, Fe, Mg and Zn were measured by flame atomic absorption spectrometry (FAAS) using a conventional air/acetylene flame, while Mn was determined by electrothermal atomic absorption spectrometry (ETAAS) under optimised conditions. Two different reference materials, IAEA-085 International Atomic Energy Agency, Monaco) and NIES No. 13 (National Institute for Environmental Studies, Japan), with certified metal contents for some of the elements investigated, were used in order to verify the accuracy of the methods.     

Population data at two short tandem repeat loci D2S1338 and D19S433 in the sample of multinational Bosnia and Herzegovina residents

POPULATION: We have analyzed the distribution of allele frequencies at two short tandem repeats loci (D2S1338 and D19S433) in a multinational sample of Bosnia and Herzegovina (B&H) residents. A total of 110 unrelated male and female individuals (Caucasians) from different regions of B&H were sampled for the analysis. We ensured that the sample reflected approximate proportional participation of the three main ethnic groups in the population of B&H (Bosniacs-Muslim [45%], Serbs [34%], Croats [21%]).     

Analysis of age-at-death estimation through the use of pubic symphyseal data

The question of whether age parameters derived from an American population will reliably estimate age-at-death for East European skeletal populations is important since the ability to accurately estimate an individual's age-at-death hinges on what standard is used. A reference sample of identified individuals with known ages-at-death from the regions of the Former Yugoslavia (n = 861) is used to determine the age structure of victims and serves as the prior in the Bayesian analysis. Pubic symphyseal data in the manners of Todd (Am J Phys Anthropol, 3 [1920], 285; Am J Phys Anthropol, 4 [1921], 1) and Suchey-Brooks (Am J Phys Anthropol, 80 [1986], 167) were collected for n = 296 Balkan males and females and for n = 2078 American males and females. An analysis of deviance is calculated using an improvement chi-square to test for population variation in the aging processes of American and East European populations using proportional odds probit regression. When males and females are treated separately, there is a significant association among females and the population (df = 1, chi-square likelihood ratio = 15.071, p = 0.001). New age estimates for Balkan populations are provided and are based on the calculated age distribution from the Gompertz-Makeham hazard analysis and the ages-of-transition. To estimate the age-at-death for an individual, the highest posterior density regions for each symphyseal phase are provided.     

Detection of the cholinesterase inhibitor tacrine and its main metabolites

Tacrine, a cholinesterase inhibitor for symptomatic treatment of minor to moderate dementia, and its primary metabolites 1-hydroxy-tacrine and 4-hydroxy-tacrine were studied by means of thin-layer chromatography, UV spectroscopy and gas-chromatography/mass spectroscopy. The analytical data (corrected hRf values, UV spectra in solution as well as reflectance spectra, high-pressure liquid chromatography data, GC retention indices and EI mass spectra) including various derivatization methods are described.     

Visual detection of trace nitroaromatic explosive residue using photoluminescent metallole-containing polymers

The detection of trace explosives is important for forensic, military, and homeland security applications. Detection of widely used nitroaromatic explosives (trinitrotoluene [TNT], 2,4-dinitrotoluene [DNT], picric acid [PA]) was carried out using photoluminescent metallole-containing polymers. The method of detection is through the quenching of fluorescence of thin films of the polymer, prepared by spray coating organic solutions of the polymer, by the explosive analyte. Visual quenching of luminescence (lambda(em) approximately 400-510 nm) in the presence of the explosive is seen immediately upon illumination with near-UV light (lambda(ex)=360 nm). Detection limits were observed to be as low as 5 ng for TNT, 20 ng for DNT, and 5 ng for PA. In addition, experiments with normal production line explosives and their components show that this technology is also able to detect composition B, Pyrodex, and nitromethane. This method offers a convenient and sensitive method of detection of trace nitroaromatic explosive residue.     

Application of Raman Spectroscopy and Surface‐Enhanced Raman Scattering to the Analysis of Synthetic Dyes Found in Ballpoint Pen Inks*

Abstract: The applicability of Raman spectroscopy and surface‐enhanced Raman scattering (SERS) to the analysis of synthetic dyes commonly found in ballpoint inks was investigated in a comparative study. Spectra of 10 dyes were obtained using a dispersive system (633 nm, 785 nm lasers) and a Fourier transform system (1064 nm laser) under different analytical conditions (e.g., powdered pigments, solutions, thin layer chromatography [TLC] spots). While high fluorescence background and poor spectral quality often characterized the normal Raman spectra of the dyes studied, SERS was found to be generally helpful. Additionally, dye standards and a single ballpoint ink were developed on a TLC plate following a typical ink analysis procedure. SERS spectra were successfully collected directly from the TLC plate, thus demonstrating a possible forensic application for the technique.     

The Rhythm of the Construction "conveyor Belt"

The All-Union Seminar-Conference to Study and Disseminate the Experience of Evenly Timed Putting into Operation of Housing and Public Buildings and Structures was held in Orel. It was organized by the USSR Council of Ministers' State Committee on Construction [Gosstroi], other construction agencies, the Orel Regional Committee, and the City Committee of the CPSU. Ranking executives of the State Planning Commission, Gosstroi, the USSR Bank for Construction [Stroibank], Party and government agencies, and design and construction organizations of all the union republics took part in the work of the conference.     

Delimitation Of Competence Between USSR Agencies and Republic Agencies in the Field of Economic Guidance

The question of the scientific bases for distribution of powers [polnomochii] between the USSR and its entities [sub'ekty], the union republics, in the field of economic guidance is of political, practical, and theoretical importance.     

How do latent print examiners perceive proficiency testing? An analysis of examiner perceptions,performance, and print quality

Proficiency testing has the potential to serve several important purposes for crime laboratories and forensic science disciplines. Scholars and other stakeholders, however, have criticized standard proficiency testing procedures since their implementation in laboratories across the United States. Specifically, many experts label current proficiency tests as non-representative of actual casework, at least in part because they are not sufficiently challenging (e.g., [1], [2], [3], [4]. In the current study, we surveyed latent print examiners (n = 322) after they completed a Collaborative Testing Services proficiency test about their perceptions of test items. We also evaluated respondents’ test performance and used a quality metric algorithm (LQMetrics) to obtain objective indicators of print quality on the test. Results were generally consistent with experts’ concerns about proficiency testing. The low observed error rate, examiner perceptions of relative ease, and high objective print quality metrics together suggest that latent print proficiency testing is not especially challenging. Further, examiners indicated that the test items that most closely resembled real-world casework were also the most difficult and contained prints of the lowest quality. Study findings suggest that including prints of lower quality may increase both the difficulty and representativeness of proficiency testing in latent print examination.     

Characterization and differentiation of cyclopropylfentanyl from E-crotonylfentanyl, Z-crotonylfentanyl,and 3-butenylfentanyl

Recently, a sample containing cyclopropylfentanyl was analyzed at this laboratory. Cyclopropylfentanyl began to appear in the United States' illicit drug markets in 2017. Unfortunately, cyclopropylfentanyl presents an analytical challenge due to its mass spectrum being almost identical to that of crotonylfentanyl. There are two possible isomers of crotonylfentanyl, Z- and E- crotonylfentanyl. In order to provide sufficient analytical data to distinguish the two isomers of crotonylfentanyl and cyclopropylfentanyl, crotonylfentanyl was synthesized and fully characterized. Each isomer was analyzed via nuclear magnetic resonance spectroscopy, gas chromatography–mass spectrometry, and Fourier transform infrared spectroscopy. During the synthesis of crotonylfentanyl, an unknown compound was formed. The identification of this compound and the analytical characterization of the two isomers of crotonylfentanyl are presented. Through the comparison of these compounds, it was confirmed that cyclopropylfentanyl can be differentiated from crotonylfentanyl.     

Medical Terminology Coding Systems and Medicolegal Death Investigation Data: Searching for a Standardized Method of Electronic Coding at a Statewide Medical Examiner’s Office*

Abstract: Medical examiner and coroner reports are a rich source of data for epidemiologic research. To maximize the utility of this information, medicolegal death investigation data need to be electronically coded. In order to determine the best option for coding, we evaluated four different options (Current Procedural Terminology [CPT], International Classification of Disease [ICD] coding, Systematized Nomenclature of Medicine Clinical Terms [SNOMED CT], and an in‐house system), then conducted internal and external needs assessments to determine which system best met the needs of a centralized, statewide medical examiner’s office. Although all four systems offer distinct advantages and disadvantages, SNOMED CT is the most accurate for coding pathologic diagnoses, with ICD‐10 the best option for classifying the cause of death. For New Mexico’s Office of the Medical Investigator, the most feasible coding option is an upgrade of an in‐house coding system, followed by linkage to ICD codes for cause of death from the New Mexico Bureau of Vital Records and Health Statistics, and ideally, SNOMED classification of pathologic diagnoses.     

Morphological and spectroscopic measurements of plastic bags for the purpose of discrimination

The discrimination of noncolored transparent polyethylene bags was studied by several nondestructive and semidestructive analytical methods. X-ray diffraction, infrared spectroscopy, and optical microscopy (differential interference contrast microscopy and phase contrast microscopy) were applied to polyethylene films. X-ray diffraction was used to distinguish variations in the crystalline phase, infrared spectroscopy was used to distinguish variations in the molecular components, and optical microscopy was used to distinguish the different surface morphologies. The results show that X-ray diffraction classifies the crystalline phase of the film depending on whether it is made from low-density polyethylene, linear low-density polyethylene, or high-density polyethylene; that infrared spectroscopy is useful to distinguish the molecular components and it is the most discriminating technique; and that optical microscopy discriminate films easily by their morphological differences.     

Ersetzung der Zustimmung eines Miteigentümers

Die gerichtliche Ersetzung der nach der Bauordnung erforderlichen Zustimmung eines Miteigentümers zum Antrag eines anderen Miteigentümers auf Baubewilligung ist nicht blo? bei künftigen Ver?nderungen, sondern auch bei bereits (eigenm?chtig) vorgenommenen und damit rückwirkend rechtlich zu sanierenden Vorg?ngen zul?ssig (zur neueren stRsp vgl 4 Ob 506/87 [MietSlg 39.052], 5 Ob 70/99a [wobl 2001, 262/162 (Call) = MietSlg 53.085], 4 Ob 120/01b [EvBl 2001/191 = wobl 2002, 365/137 = MietSlg 53.086] und 5 Ob 174/02b [MietSlg 54.075]).     

Characterization of condom lubricant components using Raman spectroscopy and Raman chemical imaging

A condom can be described as a protective sheath used as a contraceptive or to protect against sexually transmitted diseases. However, individuals also use condoms during the commission of sexual assaults to prevent identification through deposited biological material. Raman spectroscopy offers a novel approach to identifying the presence of condom lubricant components. Furthermore, Raman chemical imaging expands on conventional Raman spectroscopy to characterize multiple condom lubricant components simultaneously in a manner that effectively demonstrates heterogeneous sample mixtures both spectrally and spatially. Known reference materials, liquid and solid lubricant components of common condom brands were successfully characterized using Raman dispersive spectroscopy and Raman chemical imaging without extensive sample preparation inherent to other analytical methods. The characterization of these materials demonstrates the potential of this technique to become a routine screening method for condom lubricants. This preliminary investigation provides a basis for future studies to determine the feasibility of Raman spectroscopy and Raman chemical imaging for condom lubricant trace detection in case type samples.