利用彩色文件上的图文特征鉴别喷墨打印机品牌

目的通过彩色文件上的图文特征鉴别喷墨打印机的品牌。方法在体视显微镜下观察采用不同喷墨机理的惠普、佳能和爱普生三大品牌喷墨打印机打印的彩色图文。结果通过对彩色图文上六种墨迹形态特征的比较,发现三大品牌喷墨打印机打印的彩色图文存在明显差异。结论依据这六种特征对三大品牌的喷墨打印机进行鉴别。     

The use of an electrostatic detection device to identify individual and class characteristics on documents produced by printers and copiers--a preliminary study

The market is inundated with inkjet printers, laser printers, and photocopiers, which are often used in criminal activities. Many of these office machines are built by various manufacturers, hence they are constructed with different hardware designs (e.g. "rolling" and "grabbing" mechanisms) that have changed over the years due to technological advances. Examinations of printed documents that involve the chemical analysis of ink colorants and the identification of physical machine defects such as trash marks are essential for the forensic examiner, but new techniques are needed to more closely identify a machine model or group of models. An electrostatic detection device (EDD) provide forensic examiners with a nondestructive method to examine indentations on a document. In this work, an EDD is used to detect latent physical markings left on documents by printers and photocopiers. Seventeen inkjet printers, 12 laser printers, and 3 photocopy machines were used to produce test documents. Physical markings were detectable in the large majority of the documents and were reproducible 100% of the time.     

Application of capillary electrophoresis to examination of color inkjet printing inks for forensic purposes

In the process of questioned document examination, the discrimination of inkjet printing inks is becoming more necessary due to increasingly frequent counterfeiting of documents printed by inkjet printers. Therefore, a method based on micellar electrophoretic capillary chromatography (MECC) has been developed and applied to analysis of such inks extracted from paper. With the use of an optimized and validated analytical procedure, multielectropherograms of inks taken from various models of printers made by various producers (Hewlett-Packard, Epson, Brother, Lexmark and Canon) were created. It was shown that effective differentiation of individual inks was possible in terms of migration time, order and specific shapes of characteristic peaks. By comparison of recorded UV-Vis spectra, the identification of main dyes was also achievable. The usefulness of the method was confirmed by an intralaboratory test of utility, in which several forged printouts were successfully examined. The obtained results proved that the proposed procedure is a useful tool that could be applied to ink discrimination and group identification of dyes originating from inkjet printing inks. Consequently, the developed method can be applied in the forensic field, including investigation of the authenticity of documents.     

喷墨打印机走纸步进量作为机种特征的实验研究

目的确定一个有助于识别喷墨打印机种的墨迹特征。方法对Epson、HP、Canon和Lexmark四大品牌的65种喷墨打印机的实验输出样本墨迹中重复出现的瑕疵进行分析。这些瑕疵包括：横向漏白条纹、重叠条纹和纵向对接错位等。结果相邻两个瑕疵之间的距离与打印机固有的走纸步进量直接相关。观测得出的走纸步进量既稳定又反映特定机种。结论将走纸步进量作为一个喷墨打印机种特征来利用具有较强的有效性和可行性。     

Classification algorithm using halftone features of counterfeit bills and CNN

With recent advancements in image processing and printing technology, home printers have improved in performance and grown more widespread. As such, they have been increasingly used in counterfeiting and forgery. Most counterfeit bills in Korea have been created using home scanners and printers. The identification of printer model is thus necessary to rapidly track down criminals and solve crimes. Household printers can be largely divided into inkjet and laser printers. These two types of printers print halftone textures instead of continuous images. This study proposed a technique of printer classification based on halftone textures that can be observed in printed documents. Since halftone textures are expressed as periodic lattices, the images were transformed via FFT, which is highly effective at expressing periodicity. ResNet, known for its superior gradient flow, was used for training. The experiment was conducted on 12 color laser jets and 2 inkjets. Scans of bills printed by each printer were used, and halftone texture analysis was performed on these images for printer model classification. Each image was cropped into several parts; one of the cropped parts was analyzed. The analysis showed that laser printers could be 100% distinguished from inkjet printers. An accuracy of 98.44% was achieved in make classification. When 50 cropped images were used instead of a single image, the technique achieved 100% accuracy in model classification. The proposed technique is non-destructive; it offers high accessibility and efficiency as it can be performed using a scanner alone, without requiring additional optical equipment.     

Visualizing latent fingerprints on color-printed papers using ultraviolet fluorescence

Laser detection of latent fingerprints on a white paper has been performed, previously. Ultraviolet fluorescence from various kinds of printer toner and ink used for home printers were measured to study fluorescence imaging of fingerprints on a color-printed white paper. The experimental system consisted of a nanosecond pulsed tunable laser and a cooled CCD camera. Excitation wavelengths are 230 and 280 nm. Fourteen printers consisting of three color laser printers, three color inkjet printers, five monochrome laser printers, two monochrome copy machines, and a color copy machine were tested. Toner and ink of most printers exhibited fluorescence in the region from 360 to 550 nm. In most cases, clear fluorescence images were obtained by time-resolved imaging with a band-pass filter and 280-nm excitation. However for toners from laser color printers that showed strong fluorescence, better results were obtained with 230-nm excitation. Latent fingerprints on a photograph page and a black-character page of a newspaper were also imaged.     

Raman spectroscopy and laser desorption mass spectrometry for minimal destructive forensic analysis of black and color inkjet printed documents

Inkjet ink analysis is the best way to discriminate between printed documents, or even though more difficult, to connect an inkjet printed document with a brand or model of printers. Raman spectroscopy and laser desorption mass spectrometry (LDMS) have been demonstrated as powerful tools for dyes and pigments analysis, which are ink components. The aim of this work is to evaluate the aforementioned techniques for inkjet inks analysis in terms of discriminating power, information quality, and nondestructive capability. So, we investigated 10 different inkjet ink cartridges (primary colors and black), 7 from the HP manufacturer and one each from Epson, Canon and Lexmark. This paper demonstrates the capabilities of three methods: Raman spectroscopy, LDMS and MALDI-MS. Raman spectroscopy, as it is preferable to try the nondestructive approach first, is successfully adapted to the analysis of color printed documents in most cases. For analysis of color inkjet inks by LDMS, we show that a MALDI matrix (9-aminoacridine, 9AA) is needed to desorb and to ionize dyes from most inkjet inks (except Epson inks). Therefore, a method was developed to apply the 9AA MALDI matrix directly onto the piece of paper while avoiding analyte spreading. The obtained mass spectra are very discriminating and lead to information about ink additives and paper compositions. Discrimination of black inkjet printed documents is more difficult because of the common use of carbon black as the principal pigment. We show for the first time the possibility to discriminate between two black-printed documents coming from different, as well as from the same, manufacturers. Mass spectra recorded from black inks in positive ion mode LDMS detect polyethylene glycol polymers which have characteristic mass distributions and end groups. Moreover, software has been developed for rapid and objective comparison of the low mass range of these positive mode LDMS spectra which have characteristic unknown peaks.     

Preliminary Study on Determining the Sequence of Intersecting Lines by Fluorescence Technique

The determination of the sequence of intersecting lines is an important part of questioned document examinations. A fluorescence technique was used to determine the sequence of heterogeneous intersecting lines produced using inkpad ink, stamp‐pad ink, ballpoint pens, gel pens, fountain pens, colorants of carbon paper, photocopiers, laser printers, and inkjet printers. A SteREO Discovery.V20 equipped with the ZEN Blue Lite software was chosen to perform the tests.As the results obtained from the study were positive under most conditions, the fluorescence technique was found to be very successful in determining the sequence of intersecting lines from ballpoint pen, gel pen, fountain pen, photocopier, laser and inkjet printers, and inkpad inks. The method was also successful in determining the sequence of intersecting lines from ballpoint pen, photocopier, laser printer, and stamp‐pad inks under most conditions. The technique was not successful in determining the order of crossing lines blending together.     

Differentiation of coloured inks of inkjet printer cartridges by thin layer chromatography and high performance liquid chromatography

Document examiners are frequently asked to determine whether or not a colour printout has originated from a particular inkjet printer. The printer can rarely be identified unless some unique defects or irregularities of the printer are present on the printout. However, it is possible to decipher the make and/or model of the printer by comparing the ink-profile of the questioned printout with that of a seized inkjet printer cartridge or from one in a database. This paper presents an overview of a systematic approach to characterising and discriminating the inks of different inkjet printer cartridges using thin layer chromatography (TLC) and high pressure liquid chromatography (HPLC) with multi-wavelength ultra-violet/visible (UV/Vis) detection. Ink samples from 23 different inkjet printer cartridges (including originals and substitutes) of different brands and colour printouts, printed by known printers were examined with newly developed chromatographic methods. Subsequently, a database of the ink-profiles was generated. The methods provide a useful tool for discriminating coloured inks in inkjet printer cartridges of different brands.     

显微共焦拉曼光谱技术区分喷墨打印机打印的彩色图文墨迹

目的建立显微共焦拉曼光谱法区分喷墨打印机打印的彩色图文墨迹的方法。方法利用显微共焦拉曼光谱技术所具有微量、微区、原位分析及非破坏性等特点,对24种常见彩色墨水墨迹分别进行检验。结果品红色墨点墨迹成分归类区分效果最好,其次是黄色墨点,最后是蓝色墨点。结论采用显微共焦拉曼光谱技术对彩色打印墨迹进行不同颜色单点分析可大大提高喷墨打印机厂家型号的识别率,是一种有效的检测手段。     

彩色喷墨打印印文的检验鉴定

将真印文扫描后用彩色喷墨打印机打印的方法伪造印章印文,目前有上升趋势。结合一宗具体案件,研究该种伪造印章印文方法的特点与鉴定要点,供同行参考。     

Analysis of Pigmented Inkjet Printer Inks and Printed Documents by Laser Desorption/Mass Spectrometry*,†

Abstract: Anyone with a computer, scanner, and color printer has the capability for creating documents such as identification cards, passports, and counterfeit currency. Laser desorption mass spectrometry (LDMS) has been demonstrated as a powerful tool for colorant analysis. Inkjet printers are now moving largely toward the use of pigments as colorants; their insolubility makes analysis by simpler methods such as thin‐layer chromatography no longer an option. Recent developments in pigmented inkjet printer inks, such as gloss optimizers that coat pigment particles, may prohibit colorant analysis by LDMS. We demonstrate here that pigments used in inks from two Epson printers can be detected and analyzed by LDMS. Also, LDMS spectra of various colors created using a 4‐cartridge (cyan/magenta/yellow/black, CMYK) inkset are evaluated, to begin to develop an approach for unraveling LDMS data from real samples, to determine the number of inks used by a printer, and the chemical composition of the colorants.     

针式打印文件检验的探讨

针式打印机是一种常用的办公机具,从针式打印机的结构和打印原理出发,阐述了针式打印文件种类鉴别和个体识别所依据的打印特征,为针式打印文件的检验鉴定进行操作层面的探讨。     

变动装订痕迹的特征及检验方法

对机制、半机制和手工装订的原始痕迹特征和变动痕迹特征进行叙述描绘,并着重介绍变动装订痕迹的检验方法.     

A Preliminary Study on Sources of Banding Artifacts for the Identification of Monochromatic Laser Printers,

The analysis of questioned documents printed with monochromatic toner has been a great challenge to document examiners. Banding artifacts, which are often perceived in the outputs of laser printers, could be a solution to the identification of printers. In this study, sources other than the gear transmission errors were discovered for some primary banding frequency components. By detecting the angular velocity variation of photosensitive drums and other rotating parts of the tested printers and comparing them with the banding signals extracted from the printouts, the authors located the sources of banding frequency components. It was shown that the sources of some primary and persistent banding signals, which were previously unknown, were traced to the periodic velocity variations of the motors or the timing belts. As inherent signatures, banding artifacts could be promising features for discriminating documents printed by individual laser printers.     

Determination of the Chronological Order of a Laser Printing and Gel Pen Writing Without any Crossing Strokes

Laser printers and writing instruments are being exploited by the forgers to produce fabricated documents. They often produce such documents by appending genuine signature on a blank sheet and later printing on it. Often these fabricated documents do not contain intersection of strokes and may pose a difficulty to forensic document examiners in analyzing cases related to such documents. Keeping in mind the limited research work done on nonintersecting strokes, the present study has been conducted with an aim to determine the sequence of nonintersecting strokes of gel pens and laser printers. Three hundred samples of nonintersecting strokes of gel pen ink and laser printing were prepared. Of these 300, 150 had laser-printed text below the gel pen strokes and the remaining 150 were prepared with gel pen stokes below the laser-printed text. The samples have been analyzed using Nikon SMZ 800N stereomicroscope. Three micro-conformation features, that is, pattern of toner distribution, ink distribution, and fiber distribution have been observed in the samples. The results demonstrate the successful establishment of sequence of nonintersecting strokes in case of gel pen and laser-printed documents by the determination of micro-conformation features.     

常用彩色激光打印机打印文件暗记特征的初步研究

目的收集当前我国常用不同品牌和型号的彩色激光打印机打印样本,研究打印文件上暗记特征的提取分析及其变化规律,探讨彩色激光打印文件暗记特征在鉴定实践中的应用及其在打印文件防伪措施中的价值。方法使用显微镜、文检仪及有关图像处理技术分别检验了彩色激光打印机的打印文件样本。结果彩色激光打印机打印文件上会出现暗记特征,且不同品牌的暗记特征出现规律、形态特征和点阵特征不同。结论暗记特征可作为初步鉴别彩色激光打印机品牌型号及打印时间的依据,具有防伪价值,但其在鉴定实践中还存在一定的局限性,有待进一步研究。     

The Classification of Inkjet Inks Using AccuTOF™ DART™ (Direct Analysis in Real Time) Mass Spectrometry—A Preliminary Study

A novel approach for the analysis of inkjet inks is being reported. A time‐of‐flight mass spectrometer, coupled with a Direct Analysis in Real Time (DART?) ion source (AccuTOF? DART?), was used to determine if inkjet inks from various manufacturers and models of printers could be reliably differentiated, characterized, and identified. A total of 217 ink standards were analyzed. As inkjet printing often involves the use of multiple colors (e.g., cyan, magenta, yellow, and black) to form an image or text, two different approaches to creating a library of standards and sampling methods were evaluated for implementation in a standard operating procedure. This research will show that a microscopic examination of the region of interest is requisite to identify what colors were utilized during the printing process, prior to comparing with known standards. Finally, blind testing was administered with 10 unknown samples to assess the validity and accuracy of the methodology.     

The effects of latent print processing on questioned documents produced by office machine systems utilizing inkjet technology and toner

Counterfeiting of currency and identity documents, death threats, illegitimate business transactions, and terrorist-related activities are some examples of the types of crimes that often involve documents produced from printers and copiers. Although standard protocol typically requires a questioned document (QD) examination prior to latent print (LP) processing, occasionally, items of evidence may be submitted for a QD examination following the application of a series chemicals utilized in the development of latent fingerprints. In such cases, the forensic examiner must take into account any previous treatments prior to initiating an examination on documents produced with a printer or copier. This study was devised to examine the effects of a latent print development technique [ninhydrin, physical developer, and a bleach enhancer] on the physical and chemical examination of documents produced from copiers and printers.     

Direct and non-destructive proof of authenticity for the 2nd generation of Brazilian real banknotes via easy ambient sonic spray ionization mass spectrometry

Using a desorption/ionization technique, easy ambient sonic-spray ionization coupled to mass spectrometry (EASI-MS), documents related to the 2nd generation of Brazilian Real currency (R$) were screened in the positive ion mode for authenticity based on chemical profiles obtained directly from the banknote surface. Characteristic profiles were observed for authentic, seized suspect counterfeit and counterfeited homemade banknotes from inkjet and laserjet printers. The chemicals in the authentic banknotes' surface were detected via a few minor sets of ions, namely from the plasticizers bis(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP), most likely related to the official offset printing process, and other common quaternary ammonium cations, presenting a similar chemical profile to 1st-generation R$. The seized suspect counterfeit banknotes, however, displayed abundant diagnostic ions in the m/z 400–800 range due to the presence of oligomers. High-accuracy FT-ICR MS analysis enabled molecular formula assignment for each ion. The ions were separated by 44 m/z, which enabled their characterization as Surfynol® 4XX (S4XX, XX = 40, 65, and 85), wherein increasing XX values indicate increasing amounts of ethoxylation on a backbone of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (Surfynol® 104). Sodiated triethylene glycol monobutyl ether (TBG) of m/z 229 (C₁₀H₂₂O₄Na) was also identified in the seized counterfeit banknotes via EASI(+) FT-ICR MS. Surfynol® and TBG are constituents of inks used for inkjet printing.