共查询到19条相似文献,搜索用时 125 毫秒
1.
2.
目的 应用扫描电镜/能谱法检验不同品牌和型号激光打印机的打印文件,实现对不同机型打印文件的区分。方法 收集不同品牌和型号激光打印机10台,利用扫描电镜/能谱仪对相同的打印字符进行无机元素分析,获得样品的能谱图和mapping分析图,对样品进行定量和半定性分析;同时收集10个不同品牌的A4静电复印纸,分析纸张对实验结果的影响。结果 依据所含元素的种类可以将10台激光打印机分为四类;依据主要元素相对百分含量的比值,对不同品牌和型号激光打印文件进行区分;研究结果表明纸张因素对定性结果影响较小,对定量结果影响较大。结论 扫描电镜/能谱法可以简单、快速、无损的区分和识别激光打印文件,可以应用于二次打印文件的检验,为侦查破案提供线索。 相似文献
3.
4.
激光剥蚀电感耦合等离子体质谱技术检测车辆油漆金属元素 总被引:1,自引:0,他引:1
目的建立车辆油漆的激光剥蚀电感耦合等离子体质谱(laser ablation inductively coupled plasma mass spectrometry,LA—ICP—MS)分析方法。方法对38种车辆油漆样品采用激光剥蚀,电感耦合等离子体质谱进行测定,通过各油漆样品本含有金属元素种类和金属元素响应相对比值的差异对油漆样品进行区分。结果38种样品中有30种可直接依据所含金属元素种类的差异进行对其进行区分,其余8种依据元素间响应值比值的差异进行区分,方法重现性良好,精密度(RSD)小于10%。结论所建立的LA—ICP—MS方法简便快速、精密度良好、对样品微损,适用于法庭科学对车辆油漆的检测。 相似文献
5.
目的探索电工胶带带基的元素检验方法。方法利用扫描电镜/能谱法(SEM/EDS)对电工胶带带基中的主体元素进行定量分析,通过SPSS软件对SEM/EDS定量分析法检测出的主体元素(Cl和Ca)相对含量进行统计分析;利用X射线荧光光谱法(XRF)对电工胶带带基中的微量元素进行定性分析。结果34个品牌红色电工胶带组成的561组样品对通过SEM/EDS定量分析法可以区分539组,区分率达到96.1%;根据XRF法定性分析测出的Mg、Al、Si、S、Ti、Sb、Ba、Pb微量元素的不同组合可将34种电工胶带分成11组,两种方法结合可使不同品牌红色电工胶带的区分率达到98.4%。结论SEM/EDS法和XRF法结合可以实现同种颜色、不同品牌电工胶带的高效区分。 相似文献
6.
7.
微束X射线荧光分析法鉴别激光打印机墨粉的研究 总被引:2,自引:0,他引:2
目的利用微束X射线荧光分析法(μ-XRF)研究激光打印机用墨粉的鉴别。方法利用μ-XRF对9台不同型号激光打印机用墨粉、对应的打印字迹、提取的字迹墨粉所含元素进行定性、半定量的分析。结果根据检出元素种类的不同,可将9台不同型号激光打印机用墨粉、对应的打印字迹、提取的字迹墨粉分成7类、4类、4类,区分率分别为94.4%、75%、69.4%。结论本研究所建立的μ-XRF鉴别激光打印机墨粉方法具有微区、原位无损检验等优点,对提高激光打印文件检验水平具有现实意义。 相似文献
8.
9.
10.
11.
目的建立化学显色法检验喷墨打印机字迹色痕的方法。方法选用不同的试剂或混合试剂,对22种不同品牌的喷墨打印黑色墨水的溶解性及与不同试剂的颜色反应进行观察。结果不同品牌的喷墨打印机黑色墨水的溶解性不同,与不同试剂作用会显现不同的颜色。结论化学显色法快速、简便,可用于现场的快速检验。 相似文献
12.
13.
Chelsea E. Johnson M.S. Paul Martin Ph.D. Katherine A. Roberts Ph.D. Tatiana Trejos Ph.D. Ruthmara Corzo B.S. Jose R. Almirall Ph.D. Alan M. Safer Ph.D. 《Journal of forensic sciences》2018,63(1):66-79
This study applies Raman microspectroscopy to differentiate the chemical components in printing inks of different brands, colors, and type using the 532 nm and 785 nm excitation wavelengths. Spectra were collected from 319 inks (78 inkjet, 76 toner, 79 offset, and 86 intaglio) representing various colors. Comparisons were performed to calculate discrimination capability percentages for each ink type. Overall, Raman microspectroscopy differentiates according to the following hierarchy: intaglio (96%), inkjet (92%), offset (90%), and toner (61%). The ability of Raman microspectroscopy to differentiate between same‐colored inks from different brands was dependent on the color and ink analyzed. Based on ink color, the discrimination capability ranged from 75 to 94% (inkjet), 0 to 86% (toner), and 0 to 77% (offset). Copper phthalocyanine was detected in cyan inks and various intaglio inks, while carbon black was identified in black inkjet, offset, and intaglio inks. 相似文献
14.
Examining the sequence of intersecting seal and laser printing line is a significant method of determining the authenticity and validity of documents. In this study, five brands of stamp pad inks, three types of inkpads and seven kinds of laser printers were used to make heterogeneous line intersections. Observation method of physical characteristics, scraping technique and fluorescence method was used to determine the sequence of intersecting lines. Distinguishing features were noted between the materials produced in both sequences. As the results obtained from the study were positive, these features might provide a scientific basis for accurately determining the sequence between laser printing line and inkpad (stamp pad ink) seal. 相似文献
15.
《Science & justice》2021,61(4):435-442
With continuous innovations in laser printing technology, the number of cases of falsification using laser printers is increasing annually. Difficulties in identifying printing alternations, especially laser-printed alternations by the same printer are increasing. Effectively, repeated printing on the same page by the same printer means the original toner on the document was fused repeatedly. Thus, this study mainly investigates the effects of second fusing on the microscopic morphology of toner to examine whether documents have been tampered with. To detect the influence of fusing on the microscopic morphology of toner, 170 documents printed by 17 different models of laser printers from 5 brands were studied. It was found that, according to microscopic observations, the micrographs of toner may become brighter, darker or both with repetition of the fusing process. By calculating the average gray value of the micrographs of toner, it was found that, in some laser printers, the gray value of the thermoplastic accumulation area will increase after a second fusing, and the gray value of the toner particle dispersion area will decrease. In conclusion, by comparing the micrographs of toner from suspicious and reliable contents on the same page or in the same document, together with the measurement and analysis of average gray values, it is possible to examine the once- and twice-fused document contents, and further determine whether the document has been altered. 相似文献
16.
介绍了丝网版印章的制作工艺,分析了丝网版印章印文特征的可变性和稳定性,总结了丝网版印章印文检验的方法,为司法鉴定实践中此类印章印文的真伪鉴别工作提供一定参考。 相似文献
17.
18.
Elemental Characterization and Discrimination of Nontoxic Ammunition Using Scanning Electron Microscopy with Energy Dispersive X‐Ray Analysis and Principal Components Analysis 下载免费PDF全文
Seth R. Hogg Ph.D. Brian C. Hunter M.D. Ruth Waddell Smith Ph.D. 《Journal of forensic sciences》2016,61(1):35-42
Concerns over the toxic by‐products produced by traditional ammunition have led to an increase in popularity of nontoxic ammunition. In this work, the chemical composition of six brands of nontoxic ammunition was investigated and compared to that of a road flare, which served as an environmental source with similar composition. Five rounds of each brand were fired while a further five were disassembled and the primer alone was fired. Particles collected from all samples, including the road flare, were analyzed by scanning electron microscopy with energy dispersive X‐ray analysis. Common elements among the different ammunition brands included aluminum, potassium, silicon, calcium, and strontium. Spectra were then subjected to principal components analysis in which association of the primer to the intact ammunition sample was generally possible, with distinction among brands and from the road flare sample. Further, PCA loadings plots indicated the elements responsible for the association and discrimination observed. 相似文献