Scanning Electron Microscopy–Energy‐Dispersive X‐Ray (SEM/EDX): A Rapid Diagnostic Tool to Aid the Identification of Burnt Bone and Contested Cremains

This study investigates the use of Scanning electron microscopy–energy‐dispersive X‐ray (SEM‐EDX) as a diagnostic tool for the determination of the osseous origin of samples subjected to different temperatures. Sheep (Ovis aries) ribs of two experimental groups (fleshed and defleshed) were burned at temperatures of between 100°C and 1100°C in 100°C increments and subsequently analyzed with the SEM‐EDX to determine the atomic percentage of present elements. Three‐factor ANOVA analysis showed that neither the exposure temperature, nor whether the burning occurred with or without soft tissue present had any significant influence on the bone's overall elemental makeup (p > 0.05). The Ca/P ratio remained in the osseous typical range of between 1.6 and 2.58 in all analyzed samples. This demonstrates that even faced with high temperatures, the overall gross elemental content and atomic percentage of elements in bone remain stable, creating a unique “fingerprint” for osseous material, even after exposure to extreme conditions.     

Estimating the Temperature of Heat‐exposed Bone via Machine Learning Analysis of SCI Color Values: A Pilot Study

Determining maximum heating temperatures of burnt bones is a long‐standing problem in forensic science and archaeology. In this pilot study, controlled experiments were used to heat 14 fleshed and defleshed pig vertebrae (wet bones) and archaeological human vertebrae (dry bones) to temperatures of 400, 600, 800, and 1000°C. Specular component included (SCI) color values were recorded from the bone surfaces with a Konica‐Minolta cm‐2600d spectrophotometer. These color values were regressed onto heating temperature, using both a traditional linear model and the k‐nearest neighbor (k‐NN) machine‐learning algorithm. Mean absolute errors (MAE) were computed for 1000 rounds of temperature prediction. With the k‐NN approach, the median MAE prediction errors were 41.6°C for the entire sample, and 20.9°C for the subsample of wet bones. These results indicate that spectrophotometric color measurements combined with machine learning methods can be a viable tool for estimating bone heating temperature.     

Determining Volumetric Shrinkage Trends of Burnt Bone Using Micro-CT

Understanding the degree and pattern of shrinkage undergone by bone when subjected to heating is crucial to accurately deduce a biological profile from incinerated remains. X-ray microtomography (micro-CT) enables a nondestructive insight into hard tissue structural changes, while allowing for an accurate documentation of volumetric and trabecular shrinkage. Sheep ribs were experimentally burned at temperatures between 400 and 1000°C in 100°C increments and their volumetric shrinkage was calculated. Observed shrinkage ranged from 14.0% at 400°C to 45.5% at 1000°C. Bones burned at temperatures up to 600°C showed no significant difference, whereas the 700 and 800°C samples exhibited higher shrinkage. Bones burnt at 900 and 1000°C showed significantly higher shrinkage than the other temperature groups. Findings signify the potential of micro-CT in research on the effects of factors such as diagenesis or burning on the bone density, morphology and microarchitecture.     

Viability of Human Articular Chondrocytes Harvested Postmortem: Changes with Time and Temperature of In Vitro Culture Conditions

Different studies of long‐term chondrocytes viability have shown a gradual reduction as a function of time and ambient temperature. The aim of our in vitro study was to establish chondrocyte postmortem viability curves for 4°C, 11°C, 23°C, 35°C during 63 days after the donors' death. Osteochondral cylinders were procured from the knees of 16 male donors (20–47 years), stored in preservation media that was not changed, and analyzed in 3‐day intervals using a confocal laser scanning microscope. A significant influence of time on viability was found from Day 9 (p = 0.0029) and onwards (p < 0.0001). The lowest overall chondrocyte viability was at 35°C, followed by 4°C (p < 0.0001). The conditions used in this in vitro analysis suggest that similar viabilities may occur while in situ in the decedent. Further studies of chondrocyte viability from individuals with known postmortem intervals may show premise to help evaluate time since death in the late postmortem interval.     

Effects of Ketamine on the Development of forensically important Blowfly Chrysomya megacephala (F.) (Diptera: Calliphoridae) and its Forensic Relevance

This study investigated effects of ketamine on the development of Chrysomya Megacephala (Diptera: Calliphoridae) at three different temperatures. Larvae of the C. Megacephala were exposed to different concentrations of drugs and temperatures. The larval lengths, weights, and developmental durations of each stage were observed. This study demonstrated that ketamine, low temperature, and their synergistic action significantly suppressed the development of C. Megacephala (p < 0.001). The time that the larvae in all the treatments achieved the maximum length/weight was significantly delayed (p < 0.05), and that resulted in prolonged duration of larval and prepupal stages especially at low temperature. However, no linear correlations were discovered between ketamine concentration and growth rate of larval length/weight.     

Temperature‐dependent Development of Parasarcophaga similis (Meade 1876) and its Significance in Estimating Postmortem Interval

Flesh flies are commonly found insects on decaying corpses that appears slightly later than blowflies, and their development patterns are significant indicators for minimum postmortem interval (PMI_min) estimation. In this study, the flesh fly Parasarcophaga similis (Meade 1876) was reared at nine constant temperatures ranging from 15°C to 35°C to examine indicators for estimating their age. We generated three development models, including isomorphen diagram, isomegalen diagram, and thermal summation model. Larval body length at different rearing temperatures was fit into an L = a + bT + cT² + dT³ equation with which the relationship between the larval body length (L) and the time after larviposition (T) was confirmed. The pupal stage was categorized into 13 substages according to intrapuparial morphological changes, and a detailed table was generated of the pupal developmental stages at five rearing temperatures, 15°C, 20°C, 25°C, 30°C, and 35°C. This study provides fundamental data in supporting P. similis as an indicator for PMI_min estimation.     

Quantifying the Temperature of Maggot Masses and its Relationship to Decomposition

Numerous Calliphoridae species have been observed to form larval aggregations during the feeding stage of development, resulting in localized increases in temperature. This study investigates the relationship between maggot numbers in a mass and heat generation. Single‐species aggregations (Lucilia sericata) of various sizes (50–2500 individuals) were reared in the laboratory at a constant ambient temperature of 22°C. Internal mass temperatures were recorded every 5 min throughout the feeding stage of development. Results showed that mass temperatures increased with mass numbers (p‐value < 0.001), ranging from 2.5 to 14°C above ambient. A minimum mass size of 1200 produced overall temperatures that were significantly warmer than ambient, diverging away from 22°C after c. 26 h. These results indicate that the microclimate of a mass has the potential to differ significantly from ambient, which may be influencing larval development rates and should therefore be factored into mPMI estimates to increase accuracy.     

Effect of Temperature on Six Different Developmental Landmarks within the Pupal Stage of the Forensically Important Blowfly Calliphora vicina (Robineau‐Desvoidy) (Diptera: Calliphoridae)

This study investigates the pupal development times of the blow fly Calliphora vicina, which were studied in the laboratory at six different constant temperatures (15, 20, 23, 25, 28, and 30°C each ± 1°C). Lower thresholds (t_L) for development were estimated from the linear regression of the developmental rates on each temperature. These data have made it possible to calculate the accumulated degree days (ADD) necessary for C. vicina to complete the larval stage and to achieve adult emergence. The minimal duration of development from oviposition to adult emergence was found to be inversely related to temperature. Additionally, six landmarks in pupal development are showed, and for each of the landmarks, the ADD value was calculated for every rearing temperature involved. These data assist in calculating the duration of the pupal stage based on morphological characteristics and would be of great value for future forensic entomological casework.     

Development of a PCR High‐Resolution Melt Assay for Artemisia absinthium (Wormwood) and a Triplex Assay with Two Additional “Unregulated Legal High” Species Datura stramonium (Jimson Weed) and Merremia tuberosa (Hawaiian Woodrose),

Artemisia absinthium (wormwood), a common ingredient in absinthe, contains the compound thujone, which is unregulated by the U.S. Drug Enforcement Agency. Thujone can cause an “unregulated legal high” in higher concentrations. The European Union limits thujone from Artemisia species to 35 mg/kg while the U.S. Food and Drug Administration requires less than 10 ppm to be “thujone‐free.” However, individuals can smoke or ingest A. absinthium in different forms. This study developed a polymerase chain reaction (PCR) high‐resolution melt (HRM) assay to detect and identify A. absinthium based on primer specificity, sensitivity, repeatability, and robustness. A triplex assay was performed with three “unregulated legal high” species: Datura stramonium, Merremia tuberosa, and A. absinthium; the PCR HRM assay detected and identified each plant at melt temperatures 77.42 ± 0.20°C, 83.88 ± 0.22°C, and 87.77 ± 0.15°C, respectively. The primer set developed distinguished A. absinthium from a variety of plant species and was successfully triplexed.     

Taphonomic Marks on Pig Tissue Due to Cadaveric Coleoptera Activity Under Controlled Conditions

The aim of this work was to study taphonomic marks that cadaveric coleopteran can produce under controlled conditions. To evaluate this, pig trotters were initially exposed to adults of Dermestes maculatus De Geer at 21 ± 5°C and a 12:12‐h day/night cycle. Observations were made and photographs taken every 4–5 days for 9 months. When feeding and reproducing, D. maculatus produced, in both adult and larvae stages, different types of marks such as holes, striations, scratches, and pits in several kinds of tissue such as integumental, connective, and muscular, in both their fresh and dried stages. Bite marks were also evident. The results in this study provide not only taphonomic but also biological and forensic information. This is the first time that this kind of experiment has been performed.     

Effect of Temperature on the Visualization by Digital Color Mapping of Latent Fingerprint Deposits on Metal

Visualization of fingerprint deposits by digital color mapping of light reflected from the surface of heated brass, copper, aluminum, and tin has been investigated using Adobe^® Photoshop^®. Metals were heated to a range of temperatures (T) between 50°C and 500°C in 50°C intervals with enhancement being optimal when the metals are heated to 250°C, 350°C, 50°C, and 300°C, respectively, and the hue values adjusted to 247°, 245°, 5°, and 34°, respectively. Fingerprint visualization after color mapping was not degraded by subsequent washing of the metals and color mapping did not compromise the visibility of the fingerprint for all values of T. The optimum value of T for fingerprint visibility is significantly dependent of the standard reduction potential of the metal with Kendall's Tau (τ) = 0.953 (p < 0.001). For brass, this correlation is obtained when considering the standard reduction potential of zinc rather than copper.     

Effects of Different Temperatures on the Development of Dermestes Frischii and Dermestes Undulatus (Coleoptera,Dermestidae): Comparison Between Species

Dermestidae could be useful in forensic investigations to assess the PMI as adults and larvae colonize dried remains. We reared two species of Dermestidae (Dermestes frischii and Dermestes undulatus) to understand the effects of different temperatures on the length of their whole life cycle and on their immature stages. Both species were reared at 23°C ± 0.5, RH 75% and at 26°C ± 0.5, 75% RH. Our result shows that the temperature is the main factor that influences the development of those species; in fact, increasing temperature leads to a shorter development cycle (59.8 ± 0.5 and 38.1 ± 0.2 for D. frischii; 50.6 ± 0.6 and 36.2 ± 0.2 for D. undulatus). Furthermore, we found that the number of the molts before the pupa decreases from 5–7 to 5–6 for D. frischii and from 4–6 to 4–5 for D. undulatus, respectively, at 23°C and 26°C.     

“Sex change” in skeletal remains: Assessing how heat-induced changes interfere with sex estimation

The true impact of heat-induced changes in human bone regarding their sex estimation has not been comprehensively documented having a potentially negative impact on forensic anthropology. The objective of this paper was to evaluate how heat exposure affects sex estimation based on both morphological and metric features. The study focused in both low-to-medium intensity burns and high intensity burns. Selected sexually dimorphic features were analysed in 51 experimentally burnt skeletons from the 21st Century Identified Skeletal Collection. Bones were burnt to maximum temperatures between 450 °C and 1050 °C achieved after 75 to 257 min. Morphological methods tested in this study comprised the recommendations for hipbone features from Buikstra and Ubelaker (1994) and from Bruzek (2002). On the other hand, metric references tested here were the ones from Wasterlain (2000), Curate et al. (2016) and Gonçalves et al. (2013) focused on the humerus, femur, calcaneus and talus. Agreement was tested with Gwet’s AC1 test and was further assessed by calculating the relative amount of perfect agreements. Results demonstrated that heat-induced changes affected not only the scoring of morphological features burnt at high temperatures but also the scoring of features burnt at lower intensities. On the other hand, metric features were only considerably affected in high intensity burns, no major changes being documented for low-to-medium intensity burns. For low-to-medium intensity burns, the Bruzek and Curate et al. methods revealed a better agreement between the pre- and post-burning scores. For high intensity burns, better agreement was obtained by using the Bruzek (2002) and Gonçalves et al. (2013) methods. As expected, heat-induced warping, fracture and metric change had a major impact on the pre- and post-observations’ agreement. Contrary to what has been systematically assumed over the years, this impact is also quite substantial in bones burnt at low-to-medium burn intensities so caution is advised during the analysis of this kind of burnt skeletal material.     

The Effect of Flunitrazepam (Rohypnol®) on the Development of Chrysomya megacephala (Fabricius, 1794) (Diptera: Calliphoridae) and its Implications for Forensic Entomology

This study investigated the potential effects of flunitrazepam (known as “date rape drug”) on the developmental cycle of Chrysomya megacephala, an important forensic species, and their possible implications for the calculation of the PMI. A 1050 C. megacephala eggs were divided into five groups with seven replications each. The eggs were placed on artificial diet prepared with four drug concentrations of flunitrazepam (4, 8, 16, and 32 ng/g), besides the control group (prepared with water). Were evaluated the potential effects on development time, weight gain, and mortality during the cycles. The drug had no significant effect on development time or mortality although it did affect the weight of the pupae and adults (Kruskal–Wallis, p < 0.05). The result can be deduced that the determination of the postmortem interval is not affected.     

Influence of Muzzle Instability on Bullet Deflection after Perforating Laminated Particleboards

The influence of muzzle instability on bullet deflection, when perforating laminated particleboards, was studied with three different handgun bullet types. The mean deflection angles of .32 Auto FMJ and .38 Special SJHP bullets were calculated to be 0.90° and 0.83°, respectively after perforating particleboards orthogonally at a 1 m muzzle-to-target distance. The mean angles dropped to 0.70° and 0.58° at a 15 m muzzle-to-target distance. The differences in deflection angles proved to be statistically significant (p < 0.05) with p-values of 0.023 and 0.001, respectively. The mean calculated deflection angles of .38 Special LRN bullets also dropped from 1.51° to 1.38° when the muzzle-to-target distance was increased from 1 to 15 m, but this difference was not significant (p-value of 0.357). The results support the hypothesis that muzzle instability has an influence on deflection. The possible implications for shooting incident reconstructions and for future research are discussed.     

The Role of Vitreous Magnesium Quantification in Estimating the Postmortem Interval

The use of magnesium as a parameter to estimate the time of death is controversial. In 32 traumatic deaths with known postmortem intervals (PMIs), small quantities of vitreous humor (VH) were sampled repetitively every 3 h until 24 h postmortem. The bodies were kept at the constant ambient temperature of 20°C (68°F). The concentrations of magnesium were in the range of 0.47–1.15 mM. A statistically significant correlation of the concentration of magnesium with the PMI was observed (r = 0.453, p < 0.01), but with small predictive value—coefficient of variation for regression was 45.5%; the average of the paired differences between the estimated and actual PMIs was 5.24 + 3.19 h. Although useful results might be expected due to the large transmembrane gradient for magnesium, the results of this study strongly disprove the usefulness of measuring magnesium in VH to estimate the time of death.     

Variation in Developmental Time for Geographically Distinct Populations of the Common Green Bottle Fly,Lucilia sericata (Meigen)*

Abstract: Time between death and discovery of remains, or postmortem interval (PMI), can be assessed using blow fly maggot age. Forensic entomologists rely on published, often nonlocal, species‐specific developmental tables to determine maggot age. In a series of common garden experiments, we investigated the developmental rate variation between populations of Lucilia sericata collected from Sacramento, CA, San Diego, CA, and Easton, MA at 16°C, 26°C, and 36°C. For the 16°C trial the time measurement started at egg hatch, while for the higher temperatures the experiment began at oviposition; the wandering stage signified the endpoint for all experiments. The distribution of developmental times differed significantly (ANOVA, p < 0.001) between the three populations within each temperature treatment. We discovered that regional variation of developmental times within a blow fly species exists. This study demonstrates the importance of assembling local population‐specific developmental tables when estimating larval age to determine PMI.     

Detection and Identification of Kratom (Mitragyna speciosa) and Marijuana (Cannabis sativa) by a Real-Time Polymerase Chain Reaction High-Resolution Melt Duplex Assay,

Mitragyna speciosa (MS), a plant commonly known as kratom, is a widely used “legal high” opiate alternative for pain relief. DNA extracted from MS and 26 additional plant species was amplified by PCR using primers targeting the strictosidine beta-D-glucosidase (SGD) and secologanin synthase 2 (SLS2) genes and detected by high-resolution melt curves using three intercalating dyes. Amplicon sizes were confirmed using agarose gel electrophoresis. The observed melt temperatures for SGD and SLS2 were 77.08 ± 0.38°C and 77.61 ± 0.46°C, respectively, using SYBR^® Green I; 80.18 ± 0.27°C and 80.59 ± 0.08°C, respectively, using Radiant^™ Green; and 82.19 ± 0.04°C and 82.62 ± 0.13°C, respectively, using the LCGreen^® PLUS dye. The SLS2 primers demonstrated higher specificity and identified MS DNA at 0.05 ng/μL. In a duplex reaction, SLS2 and tetrahydrocannabinoic acid synthase gene primers detected and differentiated MS and Cannabis sativa (CS) by melt peaks at 82.63 ± 0.35°C and 85.58 ± 0.23°C, respectively, using LCGreen^® PLUS.     

Developmental Times of Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae) at Constant Temperatures and Applications in Forensic Entomology

The characteristic life stages of infesting blowflies (Calliphoridae) such as Chrysomya megacephala (Fabricius) are powerful evidence for estimating the death time of a corpse, but an established reference of developmental times for local blowfly species is required. We determined the developmental rates of C. megacephala from southwest China at seven constant temperatures (16–34°C). Isomegalen and isomorphen diagrams were constructed based on the larval length and time for each developmental event (first ecdysis, second ecdysis, wandering, pupariation, and eclosion), at each temperature. A thermal summation model was constructed by estimating the developmental threshold temperature D₀ and the thermal summation constant K. The thermal summation model indicated that, for complete development from egg hatching to eclosion, D₀ = 9.07 ± 0.54°C and K = 3991.07 ± 187.26 h °C. This reference can increase the accuracy of estimations of postmortem intervals in China by predicting the growth of C. megacephala.     

Tracking Movement and Temperature Selection of Larvae of Two Forensically Important Blow Fly Species Within a “Maggot Mass”

The current study responds to the lack of understanding about the temperatures experienced by individual blow fly larvae within “maggot masses.” The temperature selection of both aggregating (in a mass) and nonaggregating larvae was compared and their pattern of movement assessed. Infrared imaging determined the temperatures within a mass and in the vicinity of the constituent individual larvae, whose movements were tracked by dyeing their tissues red. Individual Chrysomya rufifacies larvae selected temperatures above 27°C, significantly higher than the temperature selected by Calliphora vicina larvae (24.5°C). However, this same difference was not seen within a mass, with both species selecting temperatures around 28°C. Larval movement in a mass was nonrandom, indicating that larvae actively select their position in a mass. Furthermore, larvae have a strong tendency to select the hottest part of a mass; therefore, maximum mass temperatures might provide a reliable proxy for the actual temperatures experienced by larvae.