Characterisation of 0.22 caliber rimfire gunshot residues by time-of-flight secondary ion mass spectrometry (TOF-SIMS): a preliminary study

The application of time-of-flight secondary ion mass spectrometry (TOF-SIMS) for the characterisation of gunshot residue (GSR) from 0.22 caliber rimfire ammunition is reported. Results obtained by TOF-SIMS were compared with conventional scanning electron microscopy (SEM) studies. As could be expected, TOF-SIMS exhibited greater elemental sensitivity than SEM equipped with energy dispersive X-ray detection (SEM-EDX), and was also capable of detecting fragments characteristic of inorganic compounds. This preliminary study indicates that TOF-SIMS offers substantial potential for forensic GSR examinations as a complementary technique to SEM-EDX. In addition TOF-SIMS is applicable to the analysis of individual particles in the typical size range encountered in GSR casework.     

Glass-containing gunshot residue particles: a new type of highly characteristic particle?

In 0.22 caliber rimfire ammunition, the primer often contains lead or lead and barium compounds. As residues from these primers do not contain lead, barium, and antimony, they cannot be uniquely classified as gunshot residue (GSR) under ASTM designation E 1588-95. In many types of 0.22 caliber rimfire ammunition, the cartridge contains a primer sensitized with glass. In this paper we describe a previously unreported type of GSR particle consisting of glass fused with other primer components. As there appear to be few potential environmental or occupational sources of particles composed of lead and barium compounds fused to glass, particularly borosilicate glass, these particles may have high evidential value. Scanning electron microscopy with energy dispersive X-ray detection (SEM-EDX) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) were evaluated for the characterization of glass-containing GSR particles. The occurrence of glass-containing GSR particles was established in the residue from various brands of 0.22 caliber ammunition, and several sub-types were identified.     

Identification of gunshot residue: a critical review

A review of the scientific papers published on inorganic gunshot residue (GSR) analysis permits to study how the particle analysis has shown its capability in detection and identification of gunshot residue. The scanning electron microscope can be the most powerful tool for forensic scientists to determine the proximity to a discharging firearm and/or the contact with a surface exposed to GSR. Particle analysis can identify individual gunshot residue particles through both morphological and elemental characteristics. When particles are detected on the collected sample, the analytical results can be interpreted following rules of a formal general interpretative system, to determine whether they come from the explosion of a primer or from other possible sources. The particles on the sample are compared with an abstract idea of "unique" GSR particle produced by the sole source of the explosion of a primer. "Uniqueness" is not the only problem related to GSR detection and identification for a forensic scientist. With "not-unique" particles interpretation of results is extremely important. The evidential strength of "not-unique" particles can increase with a more fruitful interpretative framework based on Bayes rule. For the assessment of the value of a GSR in linking a suspect and a crime, it is important to compare two hypothesis: the first can be that of the evidence if the suspect has been shooting in a specific situation, the second that of the evidence if the suspect was not involved in this shooting. This case specific or case-by-case approach is closer to what the court is interested in. The authors consider that a "case-by-case" approach should be followed whenever possible. Research of models and data such as those developed in other trace evidence material (fibres, glass, etc.) using a Bayesian approach is suggested in the interpretation of GSR.     

Automated SEM/EDS Analysis of Airbag Residue. II: Airbag Residue as a Source of Percussion Primer Residue Particles

Abstract:  Automated scanning electron microscopy with energy dispersive spectroscopy has been used to analyze airbag residue particles. Analysis of airbag residue from some passenger side airbags revealed some residue particles which are consistent with gunshot residue (GSR) samples. The source of these particles was determined to be percussion primers used to initiate the chemical reaction for deployment. This article identifies some vehicles which contain this type of airbag and demonstrates the types of particles which could be misidentified as being GSR. The low numbers of GSR particles in among the large particle populations of zirconium and/or copper–cobalt particles, which are clearly airbag residue, allow the trained analysts to distinguish the correct source of this residue. Particles containing high aluminum levels, elevated levels of allowable elements in GSR particles, or the presence of elements that are rare in GSR particles stand out as indications that the particles are not GSR in origin. This study serves as a guide to analysts who perform particle analysis in forensic investigations.     

Screening of gunshot residues using desorption electrospray ionisation-mass spectrometry (DESI-MS)

Several studies have indicated that there are potential environmental sources of particles resembling inorganic primer found in gunshot residues (GSR); as a consequence examiners are reluctant to unambiguously assign the origin of inorganic particles. If organic gunshot residues (OGSR) were found in combination with inorganic particles, the possibility of environmental sources could be potentially eliminated, thereby significantly enhancing the strength of the evidence. Methods have been previously described whereby GSR specimens can be analysed for the presence of OGSR or inorganic GRS (IGSR). However, no methods have been reported that allow the analysis of both OGSR and IGSR on the same specimen. Described in this article is a direct method using desorption electrospray ionisation-mass spectrometry (DESI-MS) for the detection of methyl centralite (MC), ethyl centralite (EC) and diphenylamine (DPA) on adhesive tape GSR stubs typically used for scanning electron microscopy-energy-dispersive X-ray (SEM-EDX) analysis. The optimisation of numerous parameters was conducted using an experimental design. The results indicate that direct analysis of these organic components of GSR is possible although some limitations were also identified. This initial investigation has also indicated that subjecting stubs to DESI analysis does not interfere with subsequent SEM-EDX analysis of primer residues; therefore the technique described herein allows a comprehensive examination of GSR that would be highly probative in the event that both OGSR and IGSR are detected in the same specimen.     

Preparation of a Ytterbium‐tagged Gunshot Residue Standard for Quality Control in the Forensic Analysis of GSR

Preparation of a ytterbium‐tagged gunshot residue (GSR) reference standard for scanning electron microscopy and energy dispersive X‐ray spectroscopic (SEM‐EDS) microanalysis is reported. Two different chemical markers, ytterbium and neodymium, were evaluated by spiking the primers of 38 Special ammunition cartridges (no propellant, no projectile) and discharging them onto 12.7 mm diameter aluminum SEM pin stubs. Following SEM‐EDS microanalysis, the majority of tri‐component particles containing lead, barium, and antimony (PbBaSb) were successfully tagged with the chemical marker. Results demonstrate a primer spiked with 0.75% weight percent of ytterbium nitrate affords PbBaSb particles characteristic of GSR with a ytterbium inclusion efficiency of between 77% and 100%. Reproducibility of the method was verified, and durability of the ytterbium‐tagged tri‐component particles under repeated SEM‐EDS analysis was also tested. The ytterbium‐tagged PbBaSb particles impart synthetic traceability to a GSR reference standard and are suitable for analysis alongside case work samples, as a positive control for quality assurance purposes.     

A simple method for detection of gunshot residue particles from hands, hair, face, and clothing using scanning electron microscopy/wavelength dispersive X-ray (SEM/WDX).

We devised a simple and rapid method for detection of gunshot residue (GSR) particles, using scanning electron microscopy/wavelength dispersive X-ray (SEM/WDX) analysis. Experiments were done on samples containing GSR particles obtained from hands, hair, face, and clothing, using double-sided adhesive coated aluminum stubs (tape-lift method). SEM/WDX analyses for GSR were carried out in three steps: the first step was map analysis for barium (Ba) to search for GSR particles from lead styphnate primed ammunition, or tin (Sn) to search for GSR particles from mercury fulminate primed ammunition. The second step was determination of the location of GSR particles by X-ray imaging of Ba or Sn at a magnification of x 1000-2000 in the SEM, using data of map analysis, and the third step was identification of GSR particles, using WDX spectrometers. Analysis of samples from each primer of a stub took about 3 h. Practical applications were shown for utility of this method.     

Characterisation of gunshot residue from three ammunition types using suppressed anion exchange chromatography

Gunshot residue (GSR) is commonly analysed in forensic casework using either scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX) or gas chromatography-mass spectrometry (GC-MS). Relatively little work has been reported on the post-discharge GSR content of non-metallic inorganic or low molecular weight organic anions to distinguish between different ammunition types. The development of an analytical method using suppressed micro-bore anion exchange chromatography (IC) is presented for the analysis of GSR. A hydroxide gradient was optimised for the separation of 19 forensically relevant organic and inorganic anions in <23min and sensitivities of the order of 0.12-3.52ng of anion detected for all species were achieved. Along with an optimised extraction procedure, this method was applied to the analysis of post-ignition residues from three selected ammunition types. By profiling and comparing the anionic content in each ammunition residue, the possibility to distinguish between each type using their anionic profiles and absolute weight is presented. The potential for interference is also discussed with respect to sample types which are typically problematic in the analysis of GSR using SEM-EDX and GC-MS. To the best of our knowledge this represents the first study on the analysis of inorganic anions in GSR using suppressed ion chromatography.     

Firework displays as sources of particles similar to gunshot residue

In light of past research being targeted to find specific particles which may be similar to gunshot residue (GSR), this project was formulated to detect any possible particulate by random particle fallout onto substrates at firework displays and to assess the impact this may have on GSR evidence. Firework residue was collected at a display site, from amongst spectators as well as from the author's hair 90min after the display. SEM-EDX analysis has detected such particulate in all three scenarios, with the firework particle population at large providing a solid ground for discrimination from GSR. Wind dispersal was found to decrease the particle population and subsequently, the latter's discriminatory power. Some particles, if treated individually were found to be indistinguishable from GSR. Findings also include residues which may mimic strontium based GSR as well as GSR which may be mixed with that from previous firings. The continuous changes made to primer and propellant compositions by manufacturers also call for greater consideration when classifying particles as originating from pyrotechnic devices. Furthermore, authorities such as police forces should be made more aware about the incidence of such particle transfer in firework related periods.     

Unusual sources of Sn in GSR. An experimental study by SEM and IBA

Gunshot Residue (GSR) produced by the discharge of a firearm often provides very useful information in criminal investigations in cases involving the use of firearms. Scanning Electron Microscopy equipped with an Energy Dispersive X-ray Spectrometer (SEM-EDS) is typically used worldwide to visualize micrometric particles constituting GSR and to analyse their elemental composition. The 2017 ASTM Standard guide for gunshot residue analysis by scanning electron microscopy/energy dispersive X-ray spectroscopy specifies that “Particles classified as characteristic of GSR will have one of the following elemental compositions: Lead, antimony, barium; Lead, barium, calcium, silicon, tin”. For the first time, the presence of an additional element, such as Sn, plays a key role in ASTM particle classification. It is known that some ammunitions, used for pistols, revolvers and rifles, contain tin foil discs for sealing the primer mixture into the cup, resulting in GSR particles containing Sn. The authors faced some cases in which Sn was unexpectedly found in GSR particles from a 0.22 Long Rifle derringer and from some 12 gauge shotguns. No tin foil discs are used in rimfire ammunitions and there is no published evidence of tin foil discs in shotshell ammunitions. Following a “case by case” approach, experimental research has been carried out to explain how Sn can be present in GSR particles when the last discharged cartridge also does not contain any Sn either in components and in the explosive charges.Moreover, the use of Particle Induced X-ray Emission (PIXE) showed the capability to overcome overlap ambiguity of Sb and Sn peaks in the X-ray spectra, being a possible key issue in real shooting cases if Sn quantities are below the lower limit of SEM detection, especially when Sb is also present.     

Lead isotope measurement of primer gunshot residues and likelihood ratio predictions for forensic cartridge discrimination and individualization in China

Gunshot residues (GSR), cartridge projectiles, and casings are frequently encountered evidence in gun-related forensic investigations. However, in circumstances where the investigation of striation marks is impossible, such as unrecovered or deformed projectiles and cartridge casings, GSR deposited on the hands or clothes of the shooter and victim-related items can provide information to establish a link between the suspect, the firearms used, and the victim. Since the formula of primers used by all cartridge manufacturers in China is identical, links based on the conventional morphological and compositional analysis of GSR are difficult to establish. However, the abundance of lead isotopes in primer components of lead styphnate varies significantly, and a fundamental understanding of these differences may facilitate the validation of primer (p)GSR evidence in forensic investigations. Here, 44 pGSR samples were characterized by Pb isotope ratios of ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb using laser ablation multicollector inductively coupled plasma mass spectrometry. There was no obvious mass fractionation of the lead isotope ratios of the primers from individual cartridges analyzed before and after the shooting process, thereby establishing a basis for the comparison of pGSR and unfired cartridges. Evaluation of the results using univariate likelihood ratio (LR) computations revealed low rates of misleading evidence (<0.53%) The results demonstrated that lead isotope ratio analysis of pGSR and LR predictions can provide a practicable method for forensic cartridge discrimination and individualization.     

SEM/EDS analysis and characterization of gunshot residues from Brazilian lead-free ammunition

The exposition to heavy metal-rich airborne due to fire practicing has forced to the development of heavy metal-free environmental ammunition primers all over the world. Here we characterize the GSR elements present in the Brazilian lead-free ammunition produced by Companhia Brasileira de Cartuchos (CBC) and commercialized by MagTech in the U.S. and Europe under the name CleanRange centerfire cartridges. Both first and second generations of CleanRange in calibers 9 mm Luger, .40 S&W, .380 AUTO and .38 SPL were analyzed and compared to regular Brazilian CBC ammunition by scanning electron microscopy/energy dispersive spectroscopy. Differences in composition and morphology of GSR particles from the two generations of CleanRange were observed. The first generation ammunition (found in Europe) presented spherical particles, being strontium the only unique element detected. The second generation (found in the U.S.) produced irregular particles composed mostly by potassium, aluminum, silicon and calcium. We can conclude that identification of GSR derived from CBC second generation lead-free ammunition in suspects' hands may be impossible without the addition of a distinct metallic taggant in the primer composition by the manufacturer.     

Automated gunshot residue particle search and characterization

The main disadvantage to gunshot residue (GSR) particle analysis utilizing scanning electron microscope/energy dispersive X-ray (SEM/EDX) instrumentation has been the excessive operator time required for search and identification. This study uses an automated particle search and characterization program for unattended GSR search and identification. This system allows for automatic matrix search, particle sizing, chemical typing, and spectral aquisition with subsequent storage of data to disk for later operator review and verification. This work describes various aspects of the program, determines appropriate parameters adequate for both unique and characteristic GSR particle identification, and evaluates the reliability of data obtained. Samples are collected via the tape lift method from test-firings of .38, .32, .25, and .22 caliber handguns at time after firing intervals of 0 to 6 h. Unique GSR particles are consistently and correctly identified by this method on tape lift samples taken up to 4 h after firing. False positive results of unique GSR particles are not encountered on control handblank samples. This technique appears to provide the forensic science community with an operator-free method of reliable GSR particle search and an improved analyst-time-per-case ratio.     

Brake linings: a source of non-GSR particles containing lead,barium, and antimony

The observation of environmental particles similar in composition to gunshot residue (GSR) are not new to forensic experts and have been described in the scientific literature. In order to better define the origin of these particles, brake linings and their wear products were examined by SEM-EDX. The results obtained demonstrate that some types of brake linings contain lead, barium, and antimony and that they can represent a source of particles showing GSR-like elemental profiles. Most of these particles can be easily discriminated from primer discharge residue because of the high levels of iron or the presence of "prohibited" elements in the spectrum. However, particles with iron at minor or trace levels and lacking "prohibited" elements were also found. It is thus advisable to use caution when describing the composition of similar particles as "unique" to primer discharge residue. The strict application of a rigorous morphological criterion is also recommended.     

Gunshot residue particles formed by using ammunitions that have mercury fulminate based primers.

Ammunition having mercury fulminate-based primers are commonly manufactured by Eastern Bloc countries and used extensively in the Middle East. Gunshot residue (GSR) particles formed by firing these types of ammunition were examined. It was observed that much lower percentage of mercury-containing GSR particles were found in samples taken from a shooter as compared to the percentage of such particles in samples from cartridge cases. This fact must therefore be taken into account when interpreting case results. A plausible explanation for the results described is proposed.     

Survey of gunshot residue analysis in forensic science laboratories

The purpose of this survey was to determine the methods of analysis being used on gunshot residue (GSR) samples in forensic science laboratories across the United States. In addition, the two general techniques of GSR analysis are compared and contrasted. Problems encountered by analysts using scanning electron microscopy/energy-dispersive X-ray analysis (SEM/EDX) are discussed.     

The Effect of Skin Debris on Gunshot Residue Sampling and Detection

These experiments were designed to determine whether skin debris (desquamated epithelial cells and apparent skin oils) affects gunshot residue (GSR) particle detection on the sticky tape lift samples prepared for scanning electron microscopy (SEM). A dabbing experiment showed that GSR particles accumulate not only on the adhesive surface of the sampler, but also on the epithelial cell surfaces. Samplers were loaded with target GSR followed by dabbing 30 times on the back of a hand. Backscatter electron images were taken at 20 kV and for some at 30 kV of the same areas. The samplers were then treated with a sodium/calcium hypochlorite solution (bleach) to remove skin debris and again imaged in the SEM. Comparison of these images shows more GSR particles will likely be revealed at 30 kV than 20 kV and more particles revealed by the bleach treatment in an automated SEM system.     

Analysis of Gunshot Residue and Associated Materials—A Review

Abstract: A comprehensive review of the scientific literature on gunshot residue (GSR) is presented. Aspects of both inorganic and organic GSR are discussed, from formation and distribution, to sample collection, preparation, and analysis using a variety of techniques. The interpretation of GSR results is also considered including issues surrounding the contamination, distribution, and transfer of GSR. Potential problems with ulterior sources of GSR like particles have been reported in the literature. For example, particles from environmental and occupational sources have been highlighted as exhibiting similar chemical and morphological characteristics to GSR. These findings are put into context with regard to interpreting samples. A move toward a “case by case” approach is argued to be more preferable to a “formal” classification system where possible. The analysis of both inorganic and organic compositions of residue samples as well as morphological considerations is considered to be a more ideal approach to GSR analysis, whereever practicable.     

A Study of the Presence of Gunshot Residue in Pittsburgh Police Stations using SEM/EDS and LC‐MS/MS

Due to possible secondary transfer of gunshot residue (GSR) onto a suspect in police custody prior to sampling, a baseline must be created for the amount of GSR present. With an increase of “lead free” ammunition, testing for both gunpowder and primer GSR is relevant. Seventy samples were collected using carbon‐coated adhesive stubs from four Pittsburgh Police Stations and vehicles to investigate these locations as sources of secondary GSR contamination. These seventy samples were analyzed for primer GSR using scanning electron microscopy‐energy‐dispersive X‐ray spectrometry. One primer GSR particle was detected; no sample was classified as positive for primer GSR. These same samples were then analyzed for gunpowder GSR using liquid chromatography coupled to tandem mass spectrometry to test for akardite II, ethylcentralite, diphenylamine, N‐nitrosodiphenylamine, 2‐nitrodiphenylamine, and 4‐nitrodiphenylamine. Ethylcentralite was quantifiable in two test samples. These results suggest there is a negligible potential for secondary transfer of primer and gunpowder GSR.     

Electrical Pulse Generated Upon Discharging a Firearm and Its Implication for Gunshot Residue Analysis

Ammunition primers consisting of a mixture of lead styphnate, barium nitrate, and antimony (III) sulfide, upon deflagration, lead to the formation of inorganic gunshot residue (GSR). The cations, from their predeflagration form, undergo reduction reactions during burning to form the classic spheroidal, micron-sized particles indicative of GSR. However, the rapidly changing pressure and temperature of the reaction zone implies that the reactions cannot go to completion. In this study, we use a conductivity detector to show that GSR produces an electrical pulse which corroborates the incomplete redox chemistry. We find that the shape of some GSR formed in an electric field also suggests its nonneutral character. Tantalizingly, the formation of GSR might be a result of Coulombic repulsion shattering the molten droplets in to smaller spheroids. Lastly, we suggest that deposition or transfer of GSR could be influenced by static electricity, an area which should be further studied.