Photoshop软件在印章印文比对检验中的应用

利用Photoshop软件的图像处理功能,对印章印文进行重叠比对,旨在为伪造印章印丈的简单比对以及检验鉴定提供一种思路。文中方法具有操作简便,精确性高的特点,可为检验鉴定工作做出初步判断。     

Lifting Bloody Footwear Impressions Using Alginate Casts Followed by Chemical Enhancement

A method for lifting bloody footwear impressions using alginate casts and enhancing the lifted impressions with amido black is presented. On rough or dark substrates, background interferences may conceal significant details of footwear impressions. Illumination with alternative light sources and chemically enhancing the bloody footwear impressions may reveal additional details, but sometimes, lifting footwear impressions prior to enhancing is the only way to expose hidden details (by using blood reagents not adequate on the original). Several cast formulations were tested for lifting the footwear impressions. The best results were achieved using Aroma fine^®. Enhancement of the footwear impressions was attempted with several reagents prior to lifting, during the casting process, and on the lifted footwear impressions. Applying amido black to footwear impressions lifted with alginate produced the sharpest and most detailed footwear impressions. Alginate castings followed by chemical enhancement with amido black may produce high‐quality footwear impressions for comparison.     

Collection of Wet‐Origin Footwear Impressions on Various Surfaces Using an Electrostatic Dust Print Lifter

Electrostatic dust print lift method is known to be able to recover only dry‐origin footwear impression. However, the wet‐origin footwear impression could also be recovered using this method. As the amount of dust accumulated before deposition of the wet‐origin footwear impression increased, the intensity of the footwear impression lifted with this method became stronger. If the footwear impression is not affected by moisture after it is made, the 28‐h old wet‐origin footwear impression could be recovered using this method. The intensity of the lifted footwear impression did not decrease significantly even when the number of sequential steps increased as long as the shoe sole is wet. However, when the moisture on the shoe sole depleted, the intensity of the footwear impression decreased sharply. This method has the advantage of being able to enhance the footwear impression without being affected by the footwear impressions deposited in the past.     

印油印迹中色料成分的UHPLC方法研究

目的对红色印油印迹色料成分进行分析,研究确定印油印迹的种类区分方法,为侦查破案提供依据。方法采用超高效液相色谱法分析,以保留时间为主进行定性,对35种不同品牌的印油产品中色料成分进行区分。结果将印油印迹分为普通印油（印泥、原子印油等）、水性印油及光敏印油三类,建立了统一的UHPLC分析方法,其种类区分率达85%以上。结论通过印油印迹成分研究,最终区分印油印迹种类,可满足实际案件中对不同类型印油的鉴别区分。     

六四式手枪弹壳发射顺序的研究

目的　研究六四式手枪射击弹壳的排序规律。方法　对已知顺序实弹射击取样 ,显微观察弹壳上发射过程中形成的痕迹 ,通过统计、归纳 ,从中发现与排序有关的痕迹特征 ,及其与发射顺序之间的关系。结果　研究发现 ,因子弹发射顺序不同 ,弹壳上出现的抛壳挺痕的高低 ,弹底边缘压擦痕的有无轻重 ,推弹突笋痕迹的形状位置与发射顺序有关。结论　根据抛壳挺等痕迹的具体形态 ,及变化特点 ,可判断出六四手枪弹壳的发射顺序。     

社会主义公民社会在当代中国的印象

社会主义公民社会这一概念是脱形于＂公民社会＂这一大范畴之下的理论模式,源于西方的历史经验及知识传统,其形态随着现代社会主义理论的产生而逐步显现出来,对于社会主义国家而言具有一定的普适性。因此,从这一概念入手,可以探析社会主义公民社会在当代中国的印象。     

胶带的剥离与粘面上汗潜手印显现方法

犯罪现场遗留的胶带极易相互缠绕粘连成团、成束 ,采取有效的方法对相互缠绕粘连的胶带进行剥离 ,是显现胶带粘面上手印的前提和基础 ,也是甚为关键的问题。可采用机械剥离法和化学剥离法对胶带进行剥离 ,采用照相法、物理显现法和化学显现法对胶带粘面手印进行显现     

Estimation of stature from hand impression: a nonconventional approach

Stature is used for constructing a biological profile that assists with the identification of an individual. So far, little attention has been paid to the fact that stature can be estimated from hand impressions left at scene of crime. The present study based on practical observations adopted a new methodology of measuring hand length from the depressed area between hypothenar and thenar region on the proximal surface of the palm. Stature and bilateral hand impressions were obtained from 503 men of central India. Seventeen dimensions of hand were measured on the impression. Linear regression equations derived showed hand length followed by palm length are best estimates of stature. Testing the practical utility of the suggested method on latent prints of 137 subjects, a statistically insignificant result was obtained when known and estimated stature derived from latent prints was compared. The suggested approach points to a strong possibility of its usage in crime scene investigation, albeit the fact that validation studies in real-life scenarios are performed.     

Evaluation and comparison of the electrostatic dust print lifter and the electrostatic detection apparatus on the development of footwear impressions on paper

The Electrostatic Dust Print Lifter (EDPL) and the Electrostatic Detection Apparatus(2) (ESDA(2)) were compared to determine if both processes could be used to develop footwear impressions of the same or similar quality and in what order they should be used to develop the highest quality footwear impression. The sensitivity of each technique was also evaluated. The quality of the footwear impressions developed was determined by comparing 25 individual characteristics present on the known shoe to the footwear impressions developed using each technique. The footwear impressions were made by stepping on paper placed over several different surfaces, which included: linoleum, industrial Berber carpet, nylon carpet placed over a (3/8)-in. pad, ceramic tile, cardboard, 1-in. foam, 4-in. foam, cement, asphalt, grass, and mulch. Each of the papers placed on these surfaces was developed using the EDPL before the ESDA(2) and vice versa. The sensitivity test for the ESDA(2) was conducted by processing 10 sheets of stacked paper that were stepped on with the known shoe, beginning with the top sheet. The sensitivity test for the EDPL was conducted by processing 10 sheets of paper stepped on with the known shoe in succession. This study determined the footwear impressions developed using the EDPL were of better comparative value than impressions developed with the ESDA(2). On average, 72.4% of the individual characteristics from the known impression were identified on images developed when the EDPL was used first compared with an average of 38.9% when the ESDA(2) was used first. Therefore, if only one technique is used, the EDPL should be chosen. The sensitivity test determined the ESDA(2) develops high-quality footwear impressions on only the top sheet of paper. No footwear impressions were developed on any sheets under the top sheet of paper. The sensitivity test also determined the EDPL results increase in quality as the amount of dust residue decreases on the surface.     

Could Defects on a Rubber Stamp be Reproduced on a Duplicated Rubber Stamp?

The examination of stamp impressions has been an integral part of questioned document examination since its inception. Matching in design details and unique defects has proven to be essential factors for rubber stamps and stamp impression examination. In this study, several duplicate stamps were made from various rubber stamp manufacturers in Hong Kong, from the same original stamp impression(s). The objective was to examine the stamp impressions prepared from these duplicated stamp products and compared with each other and to determine whether they could be distinguished from the source stamp impression(s); by comparison of the size and defects deliberated introduced onto the latter. Further consideration of this study was an attempt to create a perfect duplicate stamp from an original stamp impression. The results of the analysis showed that the quality of source stamp impression(s) and scanner device of the stamp manufacturing process, and the knowledge of the stamp manufacturer were critical to the quality and outcome of the duplicated stamp products. It is concluded that although a perfect duplicate stamp could only be made under several essential control conditions, it was still possible to create a duplicate stamp that replicated the features of the original when a high-quality source stamp impression was available.