Appearance of chemical burns resulting from the washing of a deceased body with bleach

The authors report on a case of postmortem washing of a body with bleach. An adult female victim was found nude in an alleyway with both hands removed in the City of Westminster, CO. Cause of death was attributed to severe blunt force trauma to the head. The victim had been dumped in the alleyway within 7 h of discovery. Evidence discovered at the crime scene and autopsy indicated that the murder and subsequent washing of the body with bleach occurred at a secondary location(s). The victim was wet to the touch, presenting a strong odor of bleach. Several "ribbon"-like burn patterns were observed on the victim's back and upper thighs. These burn marks were replicated by dowsing a deceased pig with an over-the-counter concentration of bleach.     

Correlation between saw blade width and kerf width

Most studies of saw marks have focused on morphological characteristics and their utility in identifying saws suspected to have been utilized in cases of criminal dismemberment. The present study examined the extent to which metric analysis may be used to correlate saw blade measurements with minimum kerf widths (MKWs). A sample of 56 partially defleshed white‐tailed deer (Odocoileus virginianus) long bones was utilized as proxy for human remains. The long bones were cut using a variety of commercially available saws, including 11 manual‐powered and 5 mechanical‐powered saws. A total of 496 false start kerfs (FSKs) were created. Two experiments were performed, with the first test examining the MKWs of FSKs produced on specimens that were restrained using a bench vise, while the second test analyzed the MKWs of FSKs produced on minimally restrained specimens. Statistical analysis using Hierarchical Linear Modeling (HLM) indicated a positive relationship between saw blade width (mm) and MKW, with blade width (p < 0.001) and the overall difference between the mechanical‐ and manual‐powered saws (p = 0.029) tested, reaching statistical significance. A comparison of MKWs produced using manual‐powered saws on restrained and minimally restrained bones suggests that restraint condition (p = 0.009) has a statistically significant effect. In comparisons of MKWs to blade widths, the average ratio for mechanical‐powered saws is 18.7% greater than the average ratio for manual‐powered saws. While the mode of the ratios was 1.42, thus supporting the general rule that MKW does not exceed 1.5 times blade width, multiple individual ratios did surpass 1.5.     

船舶螺旋桨损伤特点及成伤机制

目的总结船舶螺旋桨损伤的主要特点,探讨螺旋桨损伤的特点及形成机制,探索螺旋桨损伤与碎尸的鉴别方法。方法收集浙江省湖州地区1994─2005年尸检的100余例船舶螺旋桨损伤案例,对螺旋桨造成的损伤（擦划伤、表皮剥脱、创、骨折和全部离断创）的特点,以及衣着特征,进行回顾性分析。并与常见碎尸案中使用的工具造成的断面特征进行比较。结果船舶螺旋桨损伤是高速旋转螺旋桨的巨大劈力和机械切削所造成的损伤;碎尸是人为使用锐器切割或砍击尸体。两者由于形成机理、作用力及反作用力大小不同,导致损伤断面呈现不同的特征。结论船舶螺旋桨损伤具有独特的特征,可与碎尸损伤进行鉴别。     

Revisiting Colonial Dismemberment in South Africa: On Cultural Text and the Mandela Nuclear Family

Abstract

For many years, Nelson Rolihlahla Mandela—in a number of his public statements and writings—frankly expressed his regrets regarding the strain that his anti-apartheid activism put on his immediate and nuclear family. From his marriage to Evelyn Mase, and later to his second marriage to Nomzamo “Winnie” Madikizela, one central thread that permeates both is the impact of colonial-apartheid dismemberment on the Mandela nuclear family. Thus, the focus of this article is on the critical analysis of a cultural text that was authored by the late former statesman to reflect on various aspects of his life. Relying on his autobiography, Long Walk to Freedom, the objective of the article is to understand how such a cultural text registers the idea of colonial-apartheid dismemberment as lived by the Mandela nuclear family under colonial-apartheid oppression. Besides the 27 years spent at Robben Island prison, much of Mandela's life was characterised by his neglect of family responsibilities, as a result of the lived realities of his activism against colonial-apartheid South Africa. Thus, using the case of Mandela's nuclear family structure, the article critically analyses the role of cultural texts such as autobiographies in registering colonial-apartheid dismemberment in South Africa.     

A Retrospective Study of Intentional Body Dismemberment in New York City: 1996–2017

A review of New York City dismemberment cases occurring between 1996 and 2017 was conducted, which resulted in a total of 55 dismembered decedents in a 22‐year period. Annual trends indicate an average of 2.5 dismembered decedents. Additional results show that 53% of cases involved transection only, 35% involved disarticulation only, and 13% involved a combination of both. When the entire body could be accounted for, the average number of body portions per case was 5.5. Frequent locations for dismemberment were the neck, shoulders, hips, and knees. Dismemberment locations showed a general trend of anatomical symmetry. Seventy‐eight percent of the dismemberments involve disposal of body parts in an outside location. Eighty‐four percent were concealed from view with some type of covering. The findings from New York City are compared with other studies.     

Estimation of Living Stature from Selected Anthropometric (Soft Tissue) Measurements: Applications for Forensic Anthropology

Abstract:  Estimation of living stature has obvious utility in the identification process. Typically, anthropologists estimate stature from the measurement of long bone length. This type of analysis is traditionally conducted on skeletonized or badly decomposed remains, so collection of the necessary bone measurements is relatively simple. As the role of anthropologists expands into medical examiner offices and mass fatality incidents, the analysis of fleshed bodies and body parts is a more common scenario. For stature estimation in these types of cases (e.g., analysis of body portions recovered from an aircraft crash site or from intentional dismemberment), the presence of soft tissue on the human remains would usually necessitate dissection to expose skeletal elements to derive metric data for stature estimation. In order to circumvent this step, this paper provides various formulae that allow for standard anthropometric (i.e., soft tissue) measurements to be used in place of skeletal measurements. Data were compiled from several anthropometric studies (National Health and Nutrition Examination Survey [NHANES] and U.S. Army Anthropometric Survey [ANSUR]) and numerous regression models are presented. Results are compared between skeletal measurements and the anthropometric measurements from each study. It was found that the ANSUR models are similar to the skeletal models, while the NHANES models exhibit weaker correlation coefficients and higher standard errors. Overall, this study finds that stature estimates derived from anthropometric data provide good results and remove the necessity for dissection when working with fleshed body portions.     

Traumatic Injury Pattern Analysis in a Light Rail Transit Death: A Retrospective Case Study

Within the context of medical examiner's offices, forensic anthropologists are increasingly being asked to assist with the interpretation of traumatic skeletal injury. This case study presents an example of trauma analysis performed by forensic anthropologists at the Maricopa County Forensic Science Center in Phoenix, Arizona. The primary goal of this study is to document an uncommon pattern of traumatic injury—severe grinding abrasions of the lower appendage that macroscopically resemble sharp force trauma, especially as observed in dismemberment cases—resulting from an individual being dragged beneath a Light Rail train for c. 1.7 miles. The abraded skeletal elements include a femoral shaft fragment, a femoral head portion, and the right foot. Second, this study aims to illustrate the efficacy of forensic anthropological analysis of patterned skeletal trauma. Finally, this study demonstrates the critical importance of analyzing scene information before drawing conclusions as to the etiology of a traumatic injury pattern.     

Assessment of Wear‐Related Features of the Kerf Wall from Saw Marks in Bone*†

Abstract: Analyses of saw marks in bone may yield important information about the class characteristics of saws used in postmortem dismemberments, yet little research has been directed at identifying saws’ individualizing characteristics. This study adds to existing saw mark analysis methodologies by examining wear‐related features of kerf walls using light‐ and environmental scanning electron microscopy. A crosscut saw and hacksaw were used to create sequences of 30 cuts in bone; these sequences reveal patterns of progressive loss of fine details of kerf wall morphology with increasing saw blade wear, because of the rounding of sharp points and edges. Nevertheless, diagnostic kerf wall features used to establish class characteristics persist despite these wear‐related changes. Unsuccessful attempts at statistical analysis of wear‐related changes, based on striae width and density, suggest these patterns are not readily quantifiable. Additionally, despite the scanning electron microscope’s superior imaging capabilities, it provided few practical, methodological gains over traditional light microscopy.     

Corpse Dismemberment and a Necrofetishist

A case of postmortem dismemberment and evisceration is presented. Over a 5‐year period, a serial killer murdered twelve men, with a necrophilic intent, so he could mimic relationship behaviors with the corpses of those he killed. Analysis of the methods he chose to dispose of his victims reveals a stark contrast to the motive for perpetrating the homicides, methods which are suggestive of anger toward the victim when they could no longer fulfill their role in the necrophile's fantasy.     

A Preliminary Assessment of the Identification of Saw Marks on Burned Bone*

Abstract: This study assesses the degree of modification to the saw mark characteristics of dismembered skeletal remains when exposed to a controlled outdoor fire of limited duration. The sample consists of 36 adult pig hind limbs which were dismembered fleshed. Six handsaws and six power saws were used, with three limbs dismembered and burned for each of the saw types. Results indicate that fire exposure affects the visibility and identifiability of saw mark striae. With the handsaws, the bow saw, hacksaw, and keyhole saw were consistently recognizable. In the power saw group, the saw marks of the jigsaw, reciprocating saw, and chainsaw remained identifiable. Although the bone ends exhibited thermal alterations, the false starts were well preserved with minimal damage. Given the parameters of this study, it is possible to identify the class of saw based on the diagnostic characteristics present on the cremated bones.