Age Estimation by Racemization Method in Teeth: Application of Aspartic Acid,Glutamate, and Alanine

Abstract: Here, we report on an experimental approach of simultaneous determination of various amino acids racemization (AAR) rates in teeth. We evaluated the measurements of aspartic acid (Asp), glutamate (Glu), and alanine (Ala) isolated from dentin. Asx D/L rates from total amino acid fraction, generally used for age estimation, showed high correlation (r = 0.98) with age. As Glx and Ala showed very slow racemization kinetics in TA, we performed further analysis of the acid‐soluble protein (SP) fraction. The results supported improved correlation between age and D/L rates for Glu (r = 0.84) and Ala (r = 0.85), as well as for Asp (r = 0.98). By providing further elucidation on dentin protein racemization, the technique offers a considerable opportunity to involve other amino acids in age estimation studies. As the process does not require additional separation steps, the method can be easily adapted to existing protocols.     

An application of D- and L-aspartic acid mixtures as standard specimens for the chronological age estimation

Instead of using the control teeth, we tried to prepare standard specimens to derive the equations for calculation of the age (analytical curves) with respect to each kind of tooth of various ages. To prepare standard specimens, we determined the racemization ratio of the teeth of known age that had actually been used for the appraisal of chronological age (total control teeth). Then we mixed commercially available L-Asp and D-Asp in the same D/L ratio as the measured one in the total control teeth. As a result, we were able to obtain the racemization rate equations from the age-specific standard specimens of central and lateral incisors. These equations were closely similar to those derived from actual teeth of known age. Since the racemization rate equations obtained from the standard specimens were satisfactorily reproducible, we assumed that these equations could be used in place of those obtained from the control teeth. Actually, in the age estimation of unidentified corpses from teeth, the use of standard specimens enabled us to estimate the age almost as precisely as estimated using the control teeth. Thus, the present study has demonstrated that in the estimation of chronological age the control teeth can be substituted by the standard specimens. This shows the possibility of using the standard specimens also in other laboratories where the racemization ratio can be measured with sufficient reproducibility.     

Comparison of age estimated from degree of racemization of aspartic acid, glutamic acid and alanine in the femur

Aspartic acid (Asp) is generally used for estimation of age by measuring the degree of racemization. For other amino acids, however, there are few reports regarding the usefulness of the degree of racemization for the estimation of age. Accordingly, in this study using the femur (obtained from 21 cadavers) as the specimen, we measured the degree of racemization of glutamic acid (Glu) and alanine (Ala) along with Asp in the total amino acid (TAA) fraction as well as in acid-insoluble collagen-rich (IC) and acid-soluble peptide (SP) sub-fractions. We compared the degrees of racemization of each amino acid and the accuracy of the ages estimated from them. The degree of racemization and the reaction rate of racemization were ranked in the order of Asp > Glu > Ala in the TAA and IC fractions, but Asp > Ala > Glu in the SP fraction. It is noteworthy that the degrees of racemization differed between the three amino acids depending on the fraction tested. The correlation coefficient (r) between the degree of racemization and the chronological age was higher in the SP than in the TAA or IC fraction. Among three amino acids, Asp showed the highest correlation coefficient as predicted. The present study confirmed that Asp from the SP fraction is the best indicator for age estimation using racemization rates.     

Age Estimation by Amino Acid Racemization in Human Teeth

Abstract: When an unidentified body is found, it is essential to establish the personal identity of the body in addition to investigating the cause of death. Identification is one of the most important functions of forensic dentistry. Fingerprint, dental, and DNA analysis can be used to accurately identify a body. However, if no information is available for identification, age estimation can contribute to the resolution of a case. The authors have been using aspartic acid racemization rates in dentin (D‐aspartic acid/L ‐ aspartic acid : D/L Asp) as an index for age estimation and have obtained satisfactory results. We report five cases of age estimation using the racemization method. In all five cases, estimated ages were accurate within a range ±3 years. We conclude that the racemization method is a reliable and practical method for estimating age.     

Quantification of propane in biological materials by head-space GC

Propane was measured in specimens taken from two persons who died from a LPG explosion in an apartment using head-space-GC/FID. Because of the variation of instrument performance and sample injection, the internal standard pentane was used. Calibration standards were prepared by injecting each calculated volume of pure propane gas into capped vials containing 2 ml of blood and 5 microl of internal standard. The calibration curve revealed good linearity from 0.09 microg/ml to at least 90 microg/ml. The method validation data also included repeatability and recovery. The propane quantities in blood, fat and brain tissue were between 0.27 and 71 microg/ml (microg/g) with the highest concentration observed in fat. The confirmation of propane was conducted by the means of solid phase micro-extraction and mass spectrometry.     

Estimation of age from a tooth by means of racemization of an amino acid, especially aspartic acid--comparison of enamel and dentin.

In a study of age estimation from teeth by means of measuring racemization of aspartic acid (Asp), a representative amino acid, the accuracy of data from enamel and dentin in the same tooth was compared. The correlation of D/L ratio of aspartic acid with actual age gave the following parameters: r = 0.928, sigma = +/- 5.2, k = 4.47 x 10(-4) yr-1 in enamel and r = 0.995, sigma = +/- 1.4, k = 5.75 x 10(-4) yr-1. The difference in ages between one estimated by the D/L ratio and the actual one was within +/- 3 years in dentin, while in enamel an error of from 2 to 11 years was observed. Reaction rate constants of the racemization in a dry postmortem state (15 degrees C) were calculated as k = 9.70 x 10(-8) yr-1 in enamel, and k = 1.33 x 10(-7) yr-1 in dentin. Compared to rates determined from teeth recently extracted from living subjects, the rate was higher in dentin than in enamel. These data reconfirmed that dentin is superior to enamel in making exact age estimations from teeth.     

Proton nuclear magnetic resonance spectroscopy (NMR) methods for determining the purity of reference drug standards and illicit forensic drug seizures

A rapid, sensitive, accurate, precise, reproducible, and versatile method for determining the purity of reference drug standards and the routine analysis of illicit drugs and adulterants using proton (1H) Nuclear Magnetic Resonance (NMR) Spectroscopy is presented. The methodology uses a weighed sample dissolved in a deuterated solvent or solvent mixture containing a high purity internal standard. The NMR experiment employs 8 scans using a 45 second delay and 90 degrees pulse. In the determination of purity of reference standards, the number of quantitative determinations available is equal to the number of peak groups that are baseline resolved. The relative standard deviation (RSD) of these signals is usually < 1% for pure standards, and the results agree well with other purity determining methods. This method can also aid in the determination of correct molecular weight for standards containing an unknown number of waters of hydration or an unknown number of acids per drug in salts. Because the molar response for the hydrogen nucleus is 1 for all compounds, and since no separation media are used, only one linearity study is required to test a probe. In the presented study, the linearity of the NMR probe was determined using methamphetamine HCl dissolved in deuterium oxide (D2O) with maleic acid as the internal standard (5 mg) for a range of concentrations from 0.033 to 69.18 mg/ml with a resulting correlation coefficient of >0.9999 for all 6 methamphetamine peak groups. The spectra of complex illicit heroin, methamphetamine, MDMA, and cocaine samples are presented, as well as an extensive list of compounds, their solubilities and the solvent(s) and internal standard used.     

Age at death determinations for autopsied remains based on aspartic acid racemization in tooth dentin: importance of postmortem conditions

The extent of aspartic acid racemization in human dentin can be used to assess chronological age of the individual. This novel chemical method of aging human remains has potential applications in forensic sciences. Six autopsy cases have been analyzed for D/L aspartic acid contents, and their ages at death calculated. Independent age information came from known identity, tooth maturation, or tooth wear estimations. The six cases represented a range of postmortem fates: recent demise, burial, and ground surface exposure. Five samples, four recently deceased and one a burial, showed racemization ages in close agreement with other age data. One specimen, subjected to 51 days of open air exposure, exhibited a vastly inflated racemization age. Postmortem conditions are crucial to the accuracy of racemization age at death measurements.     

HS-GC内标曲线法测定血中乙醇含量的不确定度评估

目的建立自动顶空-气相色谱(HS-GC)内标曲线法测定血中乙醇含量的不确定评估方法。方法从分析测定程序着手,依据不确定度评定的指导性文件,分析不确定度来源,量化不确定度分量,计算检测结果的合成标准不确定度和扩展不确定度。结果各相对不确定度来自于检材重复性检测为3.4%,乙醇标准溶液为0.71%,检材为0.61%,叔丁醇内标溶液为0.41%,标准曲线为1.1%,气相色谱仪为1.3%,血液中乙醇的相对扩展不确定度为3.9%。结论血液中乙醇含量的不确定度主要来源于检材重复性检测、气相色谱仪、乙醇标准曲线。     

Rapid analysis of malathion in blood using head space-solid phase microextraction and selected ion monitoring

A simple and rapid method for analysis of malathion in blood was developed using head space-solid phase microextraction (HS-SPME) and gas chromatography mass spectrometry/ electron impact ionization-selected ion monitoring (GC-MS/EI-SIM). A vial containing a blood sample, ammonium sulphate, sulphuric acid and fenitrothion as an internal standard, was heated at 90 °C for 15 min. The extraction fiber of the SPME was exposed for 5 min in the head space of the vial. The compounds absorbed on the fiber were detached by exposing the fibre in the injection port of GC-MS. A straight calibration curve was obtained between malathion concentrations of 2.5 to 50.0 μg g⁻¹ in blood. No interfering substances were found, and the time for analysis was 40 min for one sample.     

Mandibular morphology as an indicator of human subadult age: interlandmark approaches

The dentition is widely recognized as the set of developmental markers that appear to show the least variability against chronological age; these markers are thus widely used in forensic anthropological investigations. As a possible alternative, we investigate here the potential of mandibular morphology as a developmental marker for estimating age at death in subadults. The sample analyzed comprises 79 known age and sex subadult individuals of South African Bantu and African American origin. Linear measurements of ramus height were obtained from the mathematical conversion of three-dimensional landmark data. A series of regression analyses were then performed to predict age by using the measurement of ramus height; results were cross-validated using a jackknife procedure. Our results show that ramus height can be used to predict age in the subadult skeleton with accuracy, closely approaching that of standards based on the dentition (standard error rates are between +/-1.1 years and +/-2.4 years).     

Cyanide quantification in post-mortem biological matrices by headspace GC-MS

Cyanide is a powerful chemical asphyxiant found in some forensic cases following voluntary (suicide) or involuntary ingestion (fire, accidental exposure). A quantification method for cyanide that is specifically suited to post-mortem forensic purposes was developed. Determination was performed by headspace gas chromatography coupled to mass spectrometry using a GS-GASPRO column on an HP-6890 gas chromatograph with an HP-5973N mass detector. The biological sample was treated with an internal standard, frozen, glacial acetic acid was added and the sample was then incubated at 60°C for 15min. The headspace was sampled with a disposable syringe, and analyzed to quantify hydrogen cyanide. Isotopically labeled cyanide ((13)C(15)N) was used as the internal standard to minimize matrix effect and sampling error. The method produced an extended linear dynamic range (0.07-50μg/mL), and a method detection limit of 0.02μg/mL. Identical calibration curves were obtained when blood, gastric contents and aqueous solutions were used as the calibration standard matrix. This method was also successful in quantitating cyanide in gastric contents, one of the most variable biological fluids. The method has been validated and is being used for current forensic cases such as fire victims and suicides.     

Automated headspace solid-phase microextraction and capillary gas chromatography analysis of ethanol in postmortem specimens

Solid-phase microextraction (SPME) is a relatively new solventless sample preparation technique that allows simultaneous sampling, extraction, pre-concentration, and introduction of analytes from a sample matrix in a single procedure. This methodology has been used for the analysis of several drugs of forensic toxicology interest including volatile compounds. This paper describes a methodology for analysis of ethanol and other volatile compounds using automatic headspace solid-phase microextraction (HS-SPME) and capillary gas chromatography in postmortem specimens. The methodology was initially developed using standard solutions of acetaldehyde, acetone, methanol, and ethanol. Isobutanol was used as internal standard. Postmortem samples of blood, urine, and vitreous humor were obtained during medico-legal autopsies. To date, there are no published paper regarding alcohol analysis in vitreous humor specimens using HS-SPME and limited literature analyzing blood and urine samples. HS-SPME analysis showed that, under optimized conditions, ethanol and isobutanol (internal standard) were well-separated from other volatile compounds such as acetaldehyde, acetone, and methanol considered to be potential interferents in ethanol analysis. The calibration curves for each volatile compound demonstrated good linearity throughout the concentration range from 0.001 to 1.0 g/dl and the detection limit of ethanol in the studied specimens was approximately 0.0001 g/dl.     

SPME-GC\NPD法快速分析尿液中苯丙胺类化合物

建立了ＳＰＭＥ－ＧＣ／ＮＰＤ法同时分析尿液中九种苯丙胺类化合物的方法。取１ｍｌ尿样以４－苯基丁胺为内标,在碱性条件下,将１００μｍＰＤＭＳ纤维头浸入尿液中２０ｍｉｎ,气相色谱进样后热解吸３ｍｉｎ,用ＧＣ／ＮＰＤ进行测定。九种苯丙胺类化合物及内标完全分离,五种苯丙胺类化合物分别在０．０５～１５、０．１～１５、０．２～１５μｇ／ｍｌ浓度范围内线性良好,ｒ为０．９９２８～０．９９９５,变异系数均小于１０％。方法简便、快速、准确,可用于尿液中苯丙胺类违禁药物的检测     

Miniaturized sample preparation method for determination of amphetamines in urine

A simple and miniaturized sample preparation method for determination of amphetamines in urine was developed using on-column derivatization and gas chromatography-mass spectrometry (GC-MS). Urine was directly applied to the extraction column that was pre-packed with Extrelut and sodium carbonate. Amphetamine (AP) and methamphetamine (MA) in urine were adsorbed on the surface of Extrelut. AP and MA were then converted to a free base and derivatized to N-propoxycarbonyl derivatives using propylchloroformate on the column. Pentadeuterated MA was used as an internal standard. The recoveries of AP and MA from urine were 100 and 102%, respectively. The calibration curves showed linearity in the range of 0.50-50 microg/mL for AP and MA in urine. When urine samples containing two different concentrations (0.50 and 5.0 microg/mL) of AP and MA were determined, the intra-day and inter-day coefficients of variation were 1.4-7.7%. This method was applied to 14 medico-legal cases of MA intoxication. The results were compared and a good agreement was obtained with a HPLC method.     

Use of solid-phase microextraction (SPME) for the determination of methadone and EDDP in human hair by GC-MS

Solid-phase microextraction (SPME) is a new extraction technique with many advantages: small sample volume, simplicity, quickness and solvent-free. It is mainly applied to environmental analysis, but is also useful for the extraction of drugs from biological samples. In this paper the use of SPME is proposed for the determination of methadone and its main metabolite EDDP in hair by GC-MS. The hair samples were washed, cut into 1-mm segments, and incubated with Pronase E for 12 h. A 100-micron polydimethylsiloxane (PDMS) film fibre was submerged for 30 min in a diluted solution of the hydrolysis liquid (1:4 with borax buffer) containing methadone-d3 and EDDP-d3 as internal standards. Once the microextraction was concluded the fibre was directly inserted into the CG injection port. Linearity was found for methadone and EDDP in the range studied, 1.0-50 ng/mg hair, with correlation coefficients higher than 0.99. Interassay relative standard deviation (R.S.D) was determined to be less than 13.30% for methadone and less than 8.94% for EDDP, at 3.0 and 30.0 ng/mg. Analytical recoveries were close to 100% for both compounds on spiked samples. The method was applied to the analysis of real hair samples from eight patients of a methadone maintenance programme. The concentration of methadone in hair ranged from 2.45 to 78.10 ng/mg, and for EDDP from 0.98 to 7.76 ng/mg of hair.     

Age estimation of adults from dental radiographs

Previous studies have shown that with advancing age the size of the dental pulp cavity is reduced as a result of secondary dentine deposit, so that measurements of this reduction can be used as an indicator of age. The aim of the present study was to find a method which could be used to estimate the chronological age of an adult from measurements of the size of the pulp on full mouth dental radiographs. The material consisted of periapical radiographs from 100 dental patients who had attended the clinics of the Dental Faculty in Oslo. The radiographs of six types of teeth from each jaw were measured: maxillary central and lateral incisors and second premolars, and mandibular lateral incisors, canines and first premolars. To compensate for differences in magnification and angulation on the radiographs, the following ratios were calculated: pulp/root length, pulp/tooth length, tooth/root length and pulp/root width at three different levels. Statistical analyses showed that Pearson's correlation coefficient between age and the different ratios for each type of tooth was significant, except for the ratio between tooth and root length, which was, therefore, excluded from further analysis. Principal component analyses were performed on all ratios, followed by regression analyses with age as dependent variable and the principal components as independent variables. The principal component analyses showed that only the two first of them had significant influence on age, and a good and easily calculated approximation to the first component was found to be the mean of all the ratios. A good approximation to the second principal component was found to be the difference between the mean of two width ratios and the mean of two length ratios, and these approximations of the first and second principal components were chosen as predictors in regression analyses with age as the dependent variable. The coefficient of determination (r²) for the estimation was strongest when the ratios of the six teeth were included (r² = 0.76) and weakest when measurements from the mandibular canines alone were included (r² = 0.56). Measurement on dental radiographs may be a non-invasive technique for estimating the age of adults, both living and dead, in forensic work and in archaeological studies, but the method ought to be tested on an independent sample.     

Hair analysis for drug abuse: I. Determination of methamphetamine and amphetamine in hair by stable isotope dilution gas chromatography/mass spectrometry method

Determination of methamphetamine and amphetamine in hair was performed by gas chromatography/mass spectrometry using stable isotope-labeled internal standards, 2-methylamino-1-phenylpropane-2,3,3,3-d4 and 2-amino-1-phenylpropane-2,3,3,3-d4. Extraction of hair with methanol/5M hydrochloric acid (20:1) using ultrasonication was chosen as the standard method. The calibration curves for amphetamines in the hair were linear from 1 to 100 ng/mg (r greater than 0.99). The detection limit was 0.5 ng/mg at the 95% confidence level. The coefficients of variation (CV) (n = 8) of analysis using the spiked hair with methamphetamine were from 0.7 to 6%. The CV (n = 8) of analysis of the methamphetamine abuser's hair was 17.5%. Sectional analysis of monkey and human hair after methamphetamine ingestion suggested a good correlation between the duration of drug use and drug distribution in the hair.     

Simple and simultaneous analysis of fenfluramine, amphetamine and methamphetamine in whole blood by gas chromatography-mass spectrometry after headspace-solid phase microextraction and derivatization

A simple and sensitive method for the simultaneous analysis of fenfluramine, amphetamine and methamphetamine in whole blood was developed using a headspace-solid phase microextraction (SPME) and derivatization. A 0.5 g whole blood sample, 5 microl d(5)-methamphetamine (50 micrig/ml) as an internal standard, and 0.5 ml sodium hydroxide (1 M) were placed into a 12 ml vial, and sealed rapidly with a silicone septum and an aluminum cap. Immediately after the vial was heated to 70 degrees C in an aluminium block heater, the needle of the SPME device was inserted through the septum of the vial, and the extraction fiber was exposed in the headspace for 15 min. First, heptafluorobutyric anhydride was injected into the injection port of the GC-MS, and the compounds extracted by the fiber were then desorbed and derivatized simultaneously by exposing the fiber in the injection port. The calibration curves, using an internal standard method, demonstrated good linearity throughout the concentration range from 0.01 to 1.0 microg/g. The detection limits of this method were 5.0 ng/g for fenfluramine and methamphetamine, and 10 ng/g for amphetamine. No interferences were found, and the time for analysis was about 30 min for one sample. This method was applied to a suicide case in which the victim ingested fenfluramine. Fenfluramine was detected in the blood sample collected from the victim at the concentration of 7.7 microg/g.