Occupational exposure to ethylene oxide--Occupational Safety and Health Administration. Proposed rule and notice of hearing

By this notice, the Occupational Safety and Health Administration (OSHA) is proposing to amend its existing occupational standard that regulates employee exposure to ethylene oxide (EtO). The basis for this action is a determination by the Assistant Secretary, based on animal and human data, that exposure to EtO at OSHA's current permissible exposure limit (PEL) of 50 parts EtO per million parts of air (50 ppm) as an eight (8)-hour time-weighted average (TWA) is inadequate for employee health protection. OSHA proposes to reduce the PEL for EtO to a TWA of 1 ppm. An "action level" of 0.5 ppm as a TWA is included in the proposal as a mechanism for exempting an employer from the obligation to comply with certain requirements, such as employee exposure monitoring and medical surveillance, in instances where the employer can demonstrate that the employees exposures are at very low levels. The proposal would provide for among other requirements certain methods of exposure control, personal protective equipment, measurement of employee exposures, training, medical surveillance, signs and labels, regulated areas, emergency procedures and recordkeeping.     

Occupational exposure to formaldehyde--OSHA. Response to Court remand; final rule

By this action, the Occupational Safety and Health Administration (OSHA) hereby amends its existing regulation for occupational exposure to formaldehyde, 29 CFR 1910.1048, in response primarily to a remand by the U.S. Court of Appeals for the D.C. Circuit in UAW v. Pendergrass, 878 F.2d 389 (D.C. Cir. 1989). The final amendments lower the permissible exposure level for formaldehyde from 1 ppm (part per million) as an 8-hour time-weighted average (TWA) to an 8-hour time-weighted average of 0.75 ppm. The amendments also add medical removal protection provisions to supplement the existing medical surveillance requirements for those employees suffering significant eye, nose or throat irritation and for those suffering from dermal irritation or sensitization from occupational exposure to formaldehyde. In addition, certain changes have been made to the standard's hazard communication and employee training requirements. These amendments establish specific hazard labeling requirements for all forms of formaldehyde, including mixtures and solutions composed of 0.1% or greater of formaldehyde in excess of 0.1 ppm. Additional hazard labeling, including a warning that formaldehyde presents a potential cancer hazard, is required where formaldehyde levels, under reasonably foreseeable conditions of use, may potentially exceed 0.5 ppm. The final amendments also provide for annual training of all employees exposed to formaldehyde at levels of 0.1 ppm or higher.     

Occupational exposure to ethylene oxide--OSHA. Final rule: supplemental statement of reasons

On June 22, 1984, the Occupational Safety and Health Administration (OSHA) published a final standard for ethylene oxide (EtO) that established a permissible exposure limit of 1 part EtO per million parts of air determined as an 8-hour time--weighted average (TWA) concentration (29 CFR 1910.1047, 49 FR 25734). The standard also includes provisions for methods of exposure control, personal protective equipment, measurement of employee exposure, training, signs, and labels, medical surveillance, regulated areas, emergencies and recordkeeping. The basis for this action was a determination by OSHA, based on human and animal data, that exposure to EtO presents a carcinogenic, mutagenic, genotoxic, reproductive, neurologic, and sensitization hazard to workers. During the rulemaking proceedings that led to the establishment of the 1 ppm TWA, the issue of whether there was a need for a short-term exposure limit (STEL) for workers protection from EtO was raised. OSHA reserved decision on the adoption of a STEL at the conclusion of the rulemaking in order to permit peer review of the available evidence and to review more fully the arguments and pertinent data regarding the STEL issue. Upon receipt of the analyses from most of the peer reviewers, OSHA published a notice to that effect on September 19, 1984 (49 FR 36659) and invited public comment on the pertinent issues addressed in the peer reviews. Based on the entire rulemaking record, including the peer reviews and public comments received since June 22, the Assistant Secretary has determined that adoption of a STEL for EtO is not warranted by the available health evidence, and that a STEL is not reasonably necessary or appropriate for inclusion in the final EtO standard. OSHA has also asked that NIOSH fund certain additional studies related to whether a dose-rate relationship can be established for EtO, and OSHA will review the results of those studies when they become available.     

Occupational exposure to hexavalent chromium. Final rule

The Occupational Safety and Health Administration (OSHA) is amending the existing standard which limits occupational exposure to hexavalent chromium (Cr(VI)). OSHA has determined based upon the best evidence currently available that at the current permissible exposure limit (PEL) for Cr(VI), workers face a significant risk to material impairment of their health. The evidence in the record for this rulemaking indicates that workers exposed to Cr(VI) are at an increased risk of developing lung cancer. The record also indicates that occupational exposure to Cr(VI) may result in asthma, and damage to the nasal epithelia and skin. The final rule establishes an 8-hour time-weighted average (TWA) exposure limit of 5 micrograms of Cr(VI) per cubic meter of air (5 [mu]g/cu m). This is a considerable reduction from the previous PEL of 1 milligram per 10 cubic meters of air (1 mg/10 cu m, or 100 [mu]g/cu m) reported as CrO3, which is equivalent to a limit of 52 [mu]g/cu m as Cr(VI). The final rule also contains ancillary provisions for worker protection such as requirements for exposure determination, preferred exposure control methods, including a compliance alternative for a small sector for which the new PEL is infeasible, respiratory protection, protective clothing and equipment, hygiene areas and practices, medical surveillance, recordkeeping, and start-up dates that include four years for the implementation of engineering controls to meet the PEL. The final standard separately regulates general industry, construction, and shipyards in order to tailor requirements to the unique circumstances found in each of these sectors. The PEL established by this rule reduces the significant risk posed to workers by occupational exposure to Cr(VI) to the maximum extent that is technologically and economically feasible.     

Occupational exposure to ethylene oxide; Occupational Safety and Health Administration. Advance notice of proposed rulemaking

Notice is given that OSHA is undertaking, through rulemaking procedures under section 6(b) of the Occupational Safety and Health Act of 1970 (the Act), 29 U.S.C. 655(b), a reevaluation of the current occupational health standard regulating employee exposure to ethylene oxide (EtO), 29 CFR 1910.1000, Table Z-1. This notice summarizes the information currently available to OSHA concerning the production and use of EtO, estimates of employee exposure, and the potential health effects of employee exposure to EtO. The notice also invites interested parties to submit data, views and comments regarding the development of a new standard for EtO and the appropriate scope of coverage.     

National Institute for Occupational Safety and Health; occupational exposure to inorganic lead: request for comments and information; republication--NIOSH. Request for comments and information relevant to occupational exposure to inorganic lead

NIOSH is reviewing its recommendations contained in the document Criteria for a Recommended Standard.... Occupational Exposure to Inorganic Lead, Revised Criteria--1978 [NIOSH 1978]. The evaluation of recent literature indicates that the NIOSH recommended exposure limit [REL] of 100 micrograms/m3 as an 8-hour time-weighted average [TWA] in that document does not sufficiently protect workers from the adverse effects of exposure to inorganic lead. NIOSH is requesting comments and information relevant to the evaluation of the potential health risks associated with occupational exposure to inorganic lead, as well as case reports or other data that demonstrate adverse health effects in workers exposed to inorganic lead at or below the OSHA permissible exposure limit [PEL] of 50 micrograms/m3 as an 8-hour TWA and any information pertinent to evaluating the technical feasibility of establishing a more protective REL for inorganic lead. NIOSH is also soliciting information on worker blood lead levels [BLLs] including data on methodologies used in measuring BLLs in the workplace and information that can be used for comparing airborne inorganic lead concentrations to observed BLLs. NIOSH intends to analyze the feasibility of developing preventive measures including an REL that would provide better protection for workers. In the interim, NIOSH plans to adopt the more protective current OSHA PEL as its REL.     

Health standards for occupational noise exposure. Mine Safety and Health Administration (MSHA), Labor. Final rule

This final comprehensive rule replaces MSHA's existing standards for occupational noise exposure in coal mines and metal and nonmetal mines. The final rule establishes uniform requirements to protect the Nation's miners from occupational noise-induced hearing loss. The rule is derived in part from existing MSHA noise standards, and from the Department of Labor's existing occupational noise exposure standard for general industry promulgated by the Occupational Safety and Health Administration (OSHA). As a result of the Agency's ongoing review of its safety and health standards, MSHA determined that its existing noise standards, which are more than twenty years old, do not adequately protect miners from occupational noise-induced hearing loss. A significant risk to miners of material impairment of health from workplace exposure to noise over a working lifetime exists when miners' exposure exceeds an 8-hour time-weighted average (TWA8) of 85 dBA. MSHA expects that the final rule will significantly reduce the risk of material impairment within the mining industry as a whole.     

Ethylene oxide; certain pesticide products registered for the sterilization of equipment and supplies in hospitals and health care facilities; withdrawal of revised labeling notice--EPA. Withdrawal of notice

EPA issued a notice requesting registrants of pesticide products containing ethylene oxide (EtO) registered for certain uses in hospitals and health care facilities to submit applications to amend approved labeling. Elsewhere in this issue of the Federal Register, the Occupational Safety and Health Administration (OSHA) has promulgated comprehensive exposure standards for all occupational uses of EtO. Therefore, EPA has decided to withdraw the original notice in recognition of concerns regarding the potential preemption of the OSHA standards.     

Rules of agency practice and procedure concerning OSHA access to employee medical records. The Occupational Safety and Health Administration of the United States Department of Labor (OSHA). Final rule

These rules of agency practice and procedure, promulgated today as a new 29 CFR 1913.10, govern OSHA access to personally identifiable employee medical information contained in medical records. The rules are structured to protect the substantial personal privacy interests inherent in identifiable medical records, while also permit OSHA to make beneficial use of these records for proper occupational safety and health purposes. The rules regulate the manner in which OSHA will seek access to employee medical records, and how the medical information will be protected once in the agency's possession.     

Respiratory protection--OSHA. Final rule; request for comment on paperwork requirements

This final standard, which replaces the respiratory protection standards adopted by OSHA in 1971 (29 CFR 1910.134 and 29 CFR 1926.103), applies to general industry, construction, shipyard, longshoring, and marine terminal workplaces. The standard requires employers to establish or maintain a respiratory protection program to protect their respirator-wearing employees. The standard contains requirements for program administration; worksite-specific procedures; respiratory selection; employee training; fit testing; medical evaluation; respiratory use; respirator cleaning, maintenance, and repair; and other provisions. The final standard also simplifies respirator requirements for employers by deleting respiratory provisions in other OSHA health standards that duplicate those in the final standard and revising other respirator-related provisions to make them consistent. In addition, the standard addresses the use of respirators in Immediately Dangerous to Life or Health (IDLH) atmospheres, including interior structural firefighting. During interior structural firefighting (an IDLH atmosphere by definition), self-contained breathing apparatus is required, and two firefighters must be on standby to provide assistance or perform rescue when two firefighters are inside the burning building. Based on the record in this rulemaking and the Agency's own experience in enforcing its prior respiratory protection standards, OSHA has concluded that compliance with the final rule will assist employers in protecting the health of employees exposed in the course of their work to airborne contaminants, physical hazards, and biological agents, and that the standard is therefore necessary and appropriate. The final respiratory protection standard covers an estimated 5 million respirator wearers working in an estimated 1.3 million workplaces in the covered sectors. OSHA's benefits analysis predicts that the standard will prevent many deaths and illnesses among respirator-wearing employees every year by protecting them from exposure to acute and chronic health hazards. OSHA estimates that compliance with this standard will avert hundreds of deaths and thousands of illnesses annually. The annual costs of the standard are estimated to be $111 million, or an average of $22 per covered employee per year.     

Occupational Safety and Health Administration--Access to employee exposure and medical records. Final rule

This final occupational safety and health standard, promulgated today as a revised 29 CFR 1910.20, provides for employee, designated representative, and OSHA access to employer-maintained exposure and medical records relevant to employees exposed to toxic substances and harmful physical agents. Access is also assured to employer analyses using exposure and medical records. The final standard requires long term preservation of these records, contains provisions concerning informing employees of their rights under the standard, and includes provisions protective of trade secret information.     

Evaluating the Potential for Unintentional Occupational Exposure to Fentanyl and Fentanyl Analogues Among Medicolegal Death Investigators and Autopsy Technicians

Recent increases in deaths in the United States from synthetic opioids such as fentanyl and fentanyl analogues (fentanyls) have raised concerns about possible occupational exposures to these potent agents. Medicolegal death investigators and autopsy suite staff might perform job tasks involving exposure to fentanyls. The potential for exposure to fentanyls among medicolegal death investigators and autopsy technicians at a state medical examiner's office was evaluated through review of caseload characteristics, injury and illness logs, and procedures and policies and discussions with management and employee representatives. The evaluation showed that this medical examiner's office had low potential for work-related exposure to fentanyls; its standard operating procedures and personal protective equipment requirements should reduce the potential for occupational exposure. Medicolegal death investigation agencies can develop and implement guidance to control exposures and provide workforce education and training to reduce the potential for work-related exposure to fentanyls.     

Standards Improvement Project-Phase II. Final rule

The Occupational Safety and Health Administration (OSHA) through this final rule is continuing to remove and revise provisions of its standards that are outdated, duplicative, unnecessary, or inconsistent, or can be clarified or simplified by being written in plain language. The Agency completed Phase I of the Standards Improvement Project in June 1998. In this Phase II of the Standards Improvement Project, OSHA is again revising or removing a number of health provisions in its standards for general industry, shipyard employment, and construction. The Agency believes that the changes streamline and make more consistent the regulatory requirements in OSHA health and safety standards. In some cases, OSHA has made substantive revisions to requirements because they are outdated, duplicative, unnecessary, or inconsistent with more recently promulgated health standards. The Agency believes these revisions will reduce regulatory requirements for employers without reducing employee protection.     

Occupational exposure to bloodborne pathogens; approval of information collection requirements--OSHA. Final rule; approval of information collection requirements

On December 6, 1991, OSHA published a final standard governing occupational exposure to bloodborne pathogens (56 FR 64004). The standard is designed to eliminate or minimize occupational exposure to Hepatitis B Virus (HBV), Human Immunodeficiency Virus (HIV) and other bloodborne pathogens. At that time OSHA submitted the information collection requirements to the Office of Management and Budget (OMB) for review under section 3504(h) of the Paperwork Reduction Act (PRA) of 1980. Public reporting burden for this collection of information was estimated to average five minutes per employer response to an OSHA compliance officer's request for access to the employer's records. OMB reviewed the collection of information requirements for occupational exposure to bloodborne pathogens in accordance with the PRA, 44 U.S.C. 3501 et seq., and 5 CFR part 1320. OMB approved all information requirements contained in 29 CFR 1910.1030 under OMB clearance number 1218-0180. The OMB clearance expires on February 28, 1995. This document will also amend the December 6, 1991 rule to properly display the OMB control number.     

Dipping and coating operations. Occupational Safety and Health Administration (OSHA), Labor. Final rule

OSHA's standards for dipping and coating operations, codified at sections 1910.108 and 1910.94(d), are designed to protect employees from fire, explosion, and other hazards associated with these operations. On April 7, 1998 (63 FR 16918), OSHA published proposed revisions to these standards in the Federal Register. The Federal Register announcement requested comments on the proposed rule, as well as on three major issues identified by OSHA. Based on these comments and other considerations, the Agency has developed the final standard to accomplish several goals: To rewrite the former standards in plain language; to consolidate the former requirements in sequential sections (sections 1910.122 through 1910.126 in subpart H of part 1910); and to update the former standards to increase the compliance options available to employers. In addition to achieving these goals, OSHA concludes that the final rule being published today will enhance employee protection by making it more understandable and useful to employers and employees and more flexible and performance-oriented than the former rules. The final rule accomplishes these goals without increasing the regulatory burden of employers or reducing employee protection.     

Occupational injury and illness recording and reporting requirements. Final rule

The Occupational Safety and Health Administration (OSHA) is delaying the effective date of three provisions of the Occupational Injury and Illness Recording and Reporting Requirements rule published January 19, 2001 (66 FR 5916-6135) and is establishing interim criteria for recording cases of work-related hearing loss. The provisions being delayed are sections 1904.10 (a) and (b), which specify recording criteria for cases involving occupational hearing loss, section 1904.12, which defines "musculoskeletal disorder (MSD)" and requires employers to check the MSD column on the OSHA Log if an employee experiences a work-related musculoskeletal disorder, and section 1904.29(b)(7)(vi), which states that MSDs are not considered privacy concern cases. The effective date of these provisions is delayed from January 1, 2002 until January 1, 2003. OSHA will continue to evaluate sections 1904.10 and 1904.12 over the next year. OSHA is also adding a new paragraph(c) to section 1904.10, establishing criteria for recording cases of work-related hearing loss during calendar year 2002. Section 1904.10(c) codifies the enforcement policy in effect since 1991, under which employers must record work related shifts in hearing of an average of 25 dB or more at 2000, 3000 and 4000 hertz in either ear.     

Occupational injury and illness recording and reporting requirements. Occupational Safety and Health Administration (OSHA), U.S. Department of Labor. Final rule

The Occupational Safety and Health Administration (OSHA) is revising its rule addressing the recording and reporting of occupational injuries and illnesses (29 CFR parts 1904 and 1952), including the forms employers use to record those injuries and illnesses. The revisions to the final rule will produce more useful injury and illness records, collect better information about the incidence of occupational injuries and illnesses on a national basis, promote improved employee awareness and involvement in the recording and reporting of job-related injuries and illnesses, simplify the injury and illness recordkeeping system for employers, and permit increased use of computers and telecommunications technology for OSHA recordkeeping purposes. This rulemaking completes a larger overall effort to revise Part 1904 of Title 29 of the Code of Federal Regulations. Two sections of Part 1904 have already been revised in earlier rulemakings. A rule titled Reporting fatalities and multiple hospitalization incidents to OSHA, became effective May 2, 1994 and has been incorporated into this final rule as Section 1904.39. A second rule entitled Annual OSHA injury and illness survey of ten or more employers became effective on March 13, 1997 and has been incorporated into this final rule as Section 1904.41. The final rule being published today also revises 29 CFR 1952.4, Injury and Illness Recording and Reporting Requirements, which prescribes the recordkeeping and reporting requirements for States that have an occupational safety and health program approved by OSHA under Section 18 of the Occupational Safety and Health Act (the "Act" or "OSH Act").     

Occupational exposure to bloodborne pathogens--OSHA. Final rule

The Occupational Safety and Health Administration hereby promulgates a standard under section 6(b) of the Occupational Safety and Health Act of 1970 (the Act), 29 U.S.C. 655 to eliminate or minimize occupational exposure to Hepatitis B Virus (HBV), Human Immunodeficiency Virus (HIV) and other bloodborne pathogens. Based on a review of the information in the rulemaking record, OSHA has made a determination that employees face a significant health risk as the result of occupational exposure to blood and other potentially infectious materials because they may contain bloodborne pathogens, including hepatitis B virus which causes Hepatitis B, a serious liver disease, and human immunodeficiency virus, which causes Acquired Immunodeficiency Syndrome (AIDS). The Agency further concludes that this exposure can be minimized or eliminated using a combination of engineering and work practice controls, personal protective clothing and equipment, training, medical surveillance, Hepatitis B vaccination, signs and labels, and other provisions.     

Updating OSHA standards based on national consensus standards. Direct final rule

In this direct final rule, the Agency is removing several references to consensus standards that have requirements that duplicate, or are comparable to, other OSHA rules; this action includes correcting a paragraph citation in one of these OSHA rules. The Agency also is removing a reference to American Welding Society standard A3.0-1969 ("Terms and Definitions") in its general-industry welding standards. This rulemaking is a continuation of OSHA's ongoing effort to update references to consensus and industry standards used throughout its rules.     

Occupational exposure to tuberculosis--OSHA. Proposed rule and notice of public hearing

The Occupational Safety and Health Administration is proposing a health standard, to be promulgated under section 6(b) of the Occupational Safety and Health Act of 1970, 29 U.S.C. 655, to control occupational exposure to tuberculosis (TB). TB is a communicable, potentially lethal disease that afflicts the most vulnerable members of our society: the poor, the sick, the aged, and the homeless. As many as 13 million U.S. adults are presently believed to be infected with TB; over time, more than 1 million of these individuals may develop active TB disease and transmit the infection to others. TB remains a major health problem with 22,813 active cases reported in the U.S. in 1995. A number of outbreaks of this disease have occurred among workers in health care settings, as well as other work settings, in recent years. To add to the seriousness of the problem, some of these outbreaks have involved the transmission of multidrug-resistant strains of Mycobacterium tuberculosis, which are often fatal. Although it is the responsibility of the U.S. Public Health Service to address the problem of tuberculosis in the general U.S. population, OSHA is solely responsible for protecting the health of workers exposed to TB as a result of their job. OSHA estimates that more than 5 million U.S. workers are exposed to TB in the course of their work: in hospitals, homeless shelters, nursing homes, and other work settings. Because active TB is endemic in many U.S. populations, including groups in both urban and rural areas, workers who come into contact with diseased individuals are at risk of contracting the disease themselves. The risk confronting these workers as a result of their contact with TB-infected individuals may be as high as 10 times the risk to the general population. Although the number of reported cases of active TB has slowly begun to decline after a resurgence between 1985-1992, 16 states reported an increase in the number of TB cases in 1995, compared with 1994. Based on a review of the data, OSHA has preliminarily concluded that workers in hospitals, nursing homes, hospices, correctional facilities, homeless shelters, and certain other work settings are at significant risk of incurring TB infection while caring for their patients and clients or performing certain procedures. To reduce this occupational risk, OSHA is proposing a standard that would require employers to protect TB-exposed employees by means of infection prevention and control measures that have been demonstrated to be highly effective in reducing or eliminating job-related TB infections. These measures include the use of respirators when performing certain high hazard procedures on infectious individuals, procedures for the early identification and treatment of TB infection, isolation of individuals with infectious TB in rooms designed to protect those in the vicinity of the room from contact with the microorganisms causing TB, and medical follow-up for occupationally exposed workers who become infected. OSHA has preliminarily determined that the engineering, work practice, and administrative controls, respiratory protection, training, medical surveillance, and other provisions of the proposed standard are technologically and economically feasible for facilities in all affected industries.