激光显微共聚焦拉曼光谱仪对红色墨迹的研究

目的利用激光显微共聚焦拉曼光谱仪对文书中常见的红色墨迹材料进行表征,研究该方法对红色墨迹材料的区分能力。方法在785nm激发波长,50倍物镜条件下,对49种红色印文,以及9种彩色喷墨打印和13种彩色激光打印的红色墨迹材料进行拉曼光谱表征。结果通过对71种墨迹样品的谱图进行分析,可以发现,红色印文墨迹、喷墨打印红色墨迹及激光打印红色墨迹的拉曼光谱间均存在差异,同时,拉曼光谱可将这三种墨迹材料分别进一步区分。结论显微共聚焦激光拉曼光谱可对红色墨迹材料进行有效表征和区分。这一方法可对红色印文墨迹进行识别,并且可实现对伪造印文文件的鉴别。     

显微激光拉曼光谱技术区分喷墨打印墨迹研究

目的运用激光显微共聚焦拉曼光谱仪对打印墨水的墨迹样品进行检验。方法采用514nm激发波长,测得EPSON、HP、CANON等3个品牌21种型号墨迹样品的拉曼光谱。结果根据拉曼峰位的异同,可将21种型号墨迹样品分为8大类。结论该方法可以快速区分常见不同种类打印墨水墨迹,为印刷文件的检验鉴定提供方法参考。     

显微共焦拉曼光谱技术区分喷墨打印机打印的彩色图文墨迹

目的建立显微共焦拉曼光谱法区分喷墨打印机打印的彩色图文墨迹的方法。方法利用显微共焦拉曼光谱技术所具有微量、微区、原位分析及非破坏性等特点,对24种常见彩色墨水墨迹分别进行检验。结果品红色墨点墨迹成分归类区分效果最好,其次是黄色墨点,最后是蓝色墨点。结论采用显微共焦拉曼光谱技术对彩色打印墨迹进行不同颜色单点分析可大大提高喷墨打印机厂家型号的识别率,是一种有效的检测手段。     

显微共焦激光拉曼光谱仪分析激光打印黑色墨粉字迹

激光打印机是常用办公设备,案件中经常会涉及到激光打印文件的检验,运用显微共焦激光拉曼光谱仪检验激光打印黑色墨粉字迹是一种快速、无损、灵敏度高的检验方法,可以对墨粉成分进行定性分析,在司法实践中,此种方法对激光打印黑色墨粉具有较好的检验效果,应用前景广阔。     

黑色墨迹的拉曼光谱分析

目的对常见的黑色墨迹进行初步筛选,为墨迹的进一步检验提供依据。方法依据黑色墨迹的同色异谱特征,利用显微共焦激光拉曼光谱仪对19种黑色墨迹进行分析检验。结果根据不同墨迹的拉曼谱图,19种黑色墨迹可以分为3大类,即:未检出拉曼峰的墨迹,只检出碳物质的墨迹,以及主体色料为染料的墨迹。结论拉曼光谱可用于区分不同种类黑色墨迹,从而为选择合适的方法对黑色墨迹进一步进行检验奠定基础。     

显微激光拉曼光谱鉴别直接染料及其染色纤维

目的 研究显微激光拉曼光谱对直接染料及其染色纤维的鉴别.方法 使用显微激光拉曼光谱仪分别检验了9种直接蓝染料、6种直接黑染料和6种直接红染料及其染色的棉、苎麻和粘胶纤维.结果 当使用显微激光拉曼光谱仪检测直接染料时,514nm激光器的区分能力较强,且光谱基本不受荧光干扰;633nm和785nm激光器的区分能力相似,但较514nm激光器略弱,且光谱更易受到荧光干扰.当使用显微激光拉曼光谱仪检测染色纤维时,若染料本身拉曼光谱信号较强时,其染色纤维的拉曼光谱与染料基本一致;当染料本身拉曼光谱信号较弱且受荧光干扰时,其染色纤维的拉曼光谱受到更大荧光干扰;相同染料染色的不同纤维的拉曼光谱一致.结论 显微激光拉曼光谱是无损检验染料及其染色纤维的有效手段,染色纤维的拉曼光谱基本反映的是染料的拉曼信号.     

激光共聚焦拉曼光谱技术在烟火药检验中的应用

目的建立微量烟火药的无损检验方法。方法利用激光共聚焦拉曼光谱技术对烟火药进行检验。结果烟火药的不同组分具有不同的拉曼特征散射峰。结论利用激光共聚焦拉曼光谱技术可以对烟火药中的不同组分进行检验,通过成像技术可得到不同组分的分布信息,该方法具有检验灵敏度高、无需样品制备、无损检材等优点。     

死后离体人肝组织的激光共聚焦显微拉曼光谱分析

目的观察和探讨人死后肝组织细胞激光共聚焦显微拉曼光谱的变化规律及其与死亡时间的关系。方法离体肝组织于死后48～72h内每隔4h提取样品,采用激光共聚焦显微拉曼光谱技术进行检测。观察800cm-1～3 200cm-1范围内检测样本特征峰的变化,指认其对应的化学基团,选择强度比值I1094/I2923作为响应值,并进行统计学计算。结果在48～72h内,随时间的延长,肝组织细胞主要散射峰峰位无明显变化,而其峰强度有明显差异;与核酸有关的峰（1 094cm-1）强度随时间推移有明显下降;与脂类有关的峰（1 454cm-1、2 923cm-1）强度变化不明显;各相对峰强（I1094/I2923）随死亡时间的推移而减小,并得到回归方程（r=0.914）。结论人死后肝组织细胞DNA降解随死亡时间延长呈下降趋势,I1094/I2923值与PMI呈负线性关系。激光共聚焦显微拉曼光谱技术有望成为推断死亡时间的检测方法。     

红外光谱结合化学计量学方法在激光打印原装黑色墨粉分析中的应用研究

目的 采用红外光谱比较分析不同原装黑色墨粉（31个样本）的差异,探讨化学计量学方法在墨粉种类识别中的适用性.方法 对打印样本纸张上的黑色墨粉进行烫熨提取后直接分析检测.IR分析条件：显微红外光谱仪,常温透射模式,扫描范围为4 000～400 cm-1,分辨率为16cm-1,累计扫描次数为64次.结果 墨粉树脂主要为聚苯乙烯/甲基丙烯酸甲酯和聚对苯二甲酸/环氧树脂.采用主成分析（Principal Component Analysis,PCA）与系统聚类法（Hierarchical Cluster Analysis,HCA）对不同种类墨粉进行聚类分析与建模预报.基于前两主成分得分值（53.3％）不同树脂成分的墨粉样本聚类效果明显,同时在第三个主成分方向上黑白与彩色激光墨粉样本获得良好区分.结论 红外光谱法结合化学计量学方法用于不同种类树脂及打印类型原装黑色墨粉的聚类分析与建模预报方法可行,结果准确可靠.     

铜导线一次和二次短路熔痕的显微共聚焦激光拉曼光谱特征研究

目的 为了判定火灾发生的原因,依据激光拉曼光谱(RMS)能够反映出经过不同高温热处理炭材料的石墨化程度,以此来探索电气短路判定的技术依据.方法 利用显微共聚焦激光拉曼光谱仪对火灾中不同环境下生成的铜导线短路熔痕表面碳痕斑进行检测分析,利用碳痕斑两个拉曼特征位移峰的比值,计算不同短路熔痕表面碳化斑的石墨化度.结果 铜导线的一次短路、二次短路和火烧熔痕上残留碳斑石墨化度不同,一次短路熔珠碳痕的石墨化度R值最小,火烧熔痕的石墨化度R值最大.结论 该研究建立了显微激光拉曼光谱法无损检测分析铜导线短路熔痕的新方法.     

Classification of black powder toners on the basis of integrated analytical information provided by Fourier transform infrared spectrometry and X-ray fluorescence spectrometry

Differentiating between black powder toners used in laser printers and copiers can be challenging for forensic examiners. One hundred and sixty-two samples from 82 different types of cartridges produced by 21 manufacturers that are currently available on the Polish market were studied using Fourier transform infrared spectrometry (FT-IR) and energy-dispersive X-ray fluorescence spectrometry (XRF). The spectra obtained by these two methods were classified into 14 groups and 28 groups using FT-IR and XRF, respectively. These classifications served as a basis for the development of an analytical scheme for differentiating black powder toners. This scheme can be used with any two methods that supply different information about an examined sample. The research will show that if two samples are similar in polymer composition (e.g., FT-IR spectra), additional quantitative elemental composition from XRF analyses may provide more discrimination. It was possible to differentiate 82.5% pairs of examined samples using only FT-IR, 90.8% pairs of examined samples using only XRF, and 95.8% pairs of examined samples using these two methods. Obtained spectra and all the available information could be used to create/build a database. The results obtained confirm the multiplicity and compatibility of toners. Additionally, it was stated that not all the samples were original (OEM).     

Visualizing latent fingerprints on color-printed papers using ultraviolet fluorescence

Laser detection of latent fingerprints on a white paper has been performed, previously. Ultraviolet fluorescence from various kinds of printer toner and ink used for home printers were measured to study fluorescence imaging of fingerprints on a color-printed white paper. The experimental system consisted of a nanosecond pulsed tunable laser and a cooled CCD camera. Excitation wavelengths are 230 and 280 nm. Fourteen printers consisting of three color laser printers, three color inkjet printers, five monochrome laser printers, two monochrome copy machines, and a color copy machine were tested. Toner and ink of most printers exhibited fluorescence in the region from 360 to 550 nm. In most cases, clear fluorescence images were obtained by time-resolved imaging with a band-pass filter and 280-nm excitation. However for toners from laser color printers that showed strong fluorescence, better results were obtained with 230-nm excitation. Latent fingerprints on a photograph page and a black-character page of a newspaper were also imaged.     

Toner Particles as Forensic Evidence: Microanalytical Characterization of Known Toner and Recognition of Toner in Environmental Samples*†‡

Modern printing toners represent a prime example of subvisible particles that can be easily transferred to hands, clothing, and other surfaces. To explore the potential evidentiary value of toner particles, toner samples were collected from known printer cartridges and characterized by various microanalytical techniques to establish the properties most useful for recognition, identification, and comparison. Environmental samples (i.e., dust) were then collected from various locations at varying distances from toner-based printers, using both tape lifts and carbon adhesive stubs, to assess the possibility of detecting toner. By light microscopy, toner can be recognized on the basis of particle size and shape, as well as color. Further examination of the micromorphology in the field emission scanning electron microscope reveals characteristic morphologies and differences in surface texture and shape among toner sources. Raman spectroscopy provides chemical identification of the pigment (or pigment class) and, in some cases, also permits identification of the polymer component. While black and blue pigment chemistry remained constant among toner varieties that were studied (copper phthalocyanine and carbon black), variation in yellow and magenta pigments was observed. Analysis of dust samples collected from various environments demonstrated that while toner is consistently detectable in close proximity to printers (within 2 feet), it also can be detected in dust collected in nearby rooms. This research demonstrates that toner particles can be located, characterized, and discriminated, using a suite of microanalytical methods that are applicable to forensic casework.     

A market study of green spray paints by Fourier transform infrared (FTIR) and Raman spectroscopy.

A market study of 40 different green spray paints was carried out using infrared (FTIR) and Raman spectroscopy. The infrared technique distinguished between the 12 main groups based on their binder and extender composition. After visual comparison of the spectra 22 subgroups were observed. Raman spectroscopy was also carried out on the 40 reference paints in order to determine the pigment content. Analyses were undertaken using two different excitation sources: Argon ion (514.5 nm) and Helium-Neon (632.8 nm). The first generated strong fluorescence for most of the samples and created eight groups. Using the red laser, 15 classes were observed. Finally, using an analytical sequence starting with infrared spectroscopy followed by Raman Helium-Neon and then by Raman Argon laser, most of the paints were differentiated. In this study infrared and Raman spectroscopy complemented each other. FTIR supplied information about the binder and some extenders, and Raman provided information on the main organic pigments present.     

常用彩色激光打印机打印文件暗记特征的初步研究

目的收集当前我国常用不同品牌和型号的彩色激光打印机打印样本,研究打印文件上暗记特征的提取分析及其变化规律,探讨彩色激光打印文件暗记特征在鉴定实践中的应用及其在打印文件防伪措施中的价值。方法使用显微镜、文检仪及有关图像处理技术分别检验了彩色激光打印机的打印文件样本。结果彩色激光打印机打印文件上会出现暗记特征,且不同品牌的暗记特征出现规律、形态特征和点阵特征不同。结论暗记特征可作为初步鉴别彩色激光打印机品牌型号及打印时间的依据,具有防伪价值,但其在鉴定实践中还存在一定的局限性,有待进一步研究。     

微束X射线荧光分析法鉴别激光打印机墨粉的研究

目的利用微束X射线荧光分析法（μ-XRF）研究激光打印机用墨粉的鉴别。方法利用μ-XRF对9台不同型号激光打印机用墨粉、对应的打印字迹、提取的字迹墨粉所含元素进行定性、半定量的分析。结果根据检出元素种类的不同,可将9台不同型号激光打印机用墨粉、对应的打印字迹、提取的字迹墨粉分成7类、4类、4类,区分率分别为94.4%、75%、69.4%。结论本研究所建立的μ-XRF鉴别激光打印机墨粉方法具有微区、原位无损检验等优点,对提高激光打印文件检验水平具有现实意义。     

显微红外光谱仪与显微拉曼光谱仪对纺用无色单根纤维的检测

目的研究常见纺用单根无色纤维的有效鉴别方法。方法使用显微红外光谱仪、显微激光拉曼光谱仪研究7大类纺用单根无色纤维的分子光谱。结果显微红外光谱仪、显微激光拉曼光谱仪能有效区分包括棉、粘胶、羊毛、丝、聚酰胺、聚丙烯腈和聚酯在内的7种纤维,是检测单根纤维的有效手段。785nm激发光源是显微激光拉曼光谱仪研究这7类纤维的最佳波长。但由于纺用纤维生产过程的标准化,仅依据红外或者拉曼的峰位置区分同种类、不同产地纤维的效果一般。结论显微红外光谱仪、显微激光拉曼光谱仪是鉴别常见纺用单根无色纤维的有效方法。     

激光拉曼光谱对苯骈杂氮（堇）类药物的定性检测

目的 建立用拉曼光谱检测苯骈杂氮革类药物的定性方法.方法 利用激光拉曼光谱仪对10种苯骈杂氮革类药物进行检验.结果 10种苯骈杂氮（萆）类药物的主成分均能被拉曼准确检出.结论 该法能较好地对苯骈杂氮革类药物固体样品快速定性分析.