A Systematic Study to Understand the Effects of Particle Size Distribution of Magnetic Fingerprint Powders on Surfaces with Various Porosities

This study intends to design magnetite (Fe₃O₄)‐based magnetic fingerprint powders with different particle size distributions. It also investigates the influence of particle size distribution on the visualization of latent fingermarks with as little background staining as possible on the surfaces with various porosities in a systematic way. Two strategies were used to prepare the magnetic fingerprint formulations for this study: milling of coarse magnetite particles for different durations, and mixing of sieved fine particles with different size ranges with coarse particles. Particle size analyses of the prepared magnetic powders, optical microscopy‐based roughness analysis of the surfaces and SEM measurements of the visualized fingerprints and representative powders were performed. Mag2 of the formulations prepared through milling and Mag5 and Mag6 of the formulations prepared through sieving and mixing were more successful in the development of latent prints than the rest of the solutions.     

Autopsy Fingerprint Technique Using Fingerprint Powder

The collection of high‐quality fingerprints is an important component of routine forensic autopsies and represents one of the several potential methods for identifying a decedent. Fingerprint collection at autopsy frequently employs a manual method using fingerprint ink and cards, although some offices use digital‐scanning equipment. While these methodologies are adequate in most circumstances, this study introduces an alternative method using fingerprint powder and adhesive labels. The method is quick, easy to perform, and cost‐effective and provides the additional advantage of an adhesive label that easily conforms to the finger, palm, or foot which reduces smudging of prints in individuals with rigor mortis, skin slippage, or decomposition compared to more traditional autopsy fingerprint collection techniques. The prints can then be easily stored, either in hard‐copy form or scanned to make a digital record.     

A Novel Solvent-based Method to Separate Duct Tape from Porous Surface for Fingerprint Development

In this study, we have proposed a novel solvent-based method using a specific concentration of 3M™ Novec™ HFE-72DE and 7200 solvents to untangle duct tape from porous article with minimal impact to the quality of latent fingerprint deposited on the sticky-side surface of duct tape. A series of experiments determined that a mixture of 30% HFE-72DE:7200 (v/v) was found to be the most effective to separate various brands of duct tape from different types of porous surface, including office copy paper, newspaper, cardboard, and tissue wipe, which had been stored for up to 30 days before untangling. Further studies also revealed that 30% HFE-72DE:7200 was compatible with three common fingerprint development methods for porous articles, namely ninhydrin, indanedione-zinc, and physical developer. The nonflammability and low toxicity nature of this novel solvent mixture also make it ideal for separating duct tape from porous surface in laboratory or at crime scene.     

A Simple Computer‐assisted Quantification of Contrast in a Fingerprint

A simple method for quantification of contrast in a fingerprint is proposed. Contrast is defined as the average difference in intensity of pixels between valleys and ridges in a fingerprint. It is quantified from a scanner‐acquired image of the fingerprint using a histogram function of Adobe Photoshop. The method was validated with black inked prints and marks developed with aluminum powder. Moreover, we tested resistance of the method to rater‐dependent errors and dependence of the measurements on the resolution of an image and the model of the scanner. For both groups of fingerprints, the method gave coherent and easily interpretable quantitative values for contrast. There were no significant differences between measurements performed by different raters and by the same rater in a test–retest procedure. However, the method was found to be instrument dependent, as measurements were significantly affected by image resolution and the model of the scanner.     

Response Assessment of Thermal Papers from Four Continents to Fingerprint Development by Heat

Latent fingerprint deposits on thermal paper sourced from the U.S., China, the U.K., and Australia have been visualized by heating. U.S. and Chinese sourced paper produced two distinct types of fingerprint development. In one type (type 1), the paper dye colors where the deposit is present (as previously reported) and in the other type (type 2) the ‘inverse’ of this gives paper coloring only in areas not coincident with the deposit. Both development types gave identifiable fingerprints, the majority fading within 24 h of heating. Fingerprint development from U.K. and Australian sourced paper was exclusively type 1 and resistant to fading. Temperatures for fingerprint visualization were higher for U.S. paper (64–71°C) and Chinese paper (75–95°C) than for U.K. and Australian sourced paper (43–50°C). Particularly for Chinese sourced paper, these temperatures were within a few degrees of the normal paper color temperature. A mechanism for type 2 fingerprint development is proposed.     

Fluorescence of a Natural Fluorophore as a Key to Improve Fingerprint Contrast Image

The optical and morphological properties of resveratrol were investigated. This nontoxic fluorescent natural material, emitting in the visible blue light, was used as an optical marker, enabling the enhancement of the image contrast coming from relief pictures marked on challenging surfaces. By applying appropriated imaging softwares, this marker was verified to be very useful in the latent fingerprint recognition deposited on different wood surface types, mainly those with high level of roughness, where conventional forensic materials do not allow effective fingerprint image visualization.     

A Comparison of Cleaning Regimes for the Effective Removal of Fingerprint Deposits from Brass

Abstract:  Effective removal of fingerprint deposits is crucial for experimentation related to the corrosion of metals by fingerprint deposits. Such removal is also necessary prior to deposition of test fingerprints. The effectiveness of four regimes in removing fingerprint deposits from brass is considered. Sustained wiping of the deposit with a tissue at applied pressures of up to c . 1430 Pa or rubbing while the brass was immersed in acetone both failed to remove completely all traces of fingerprint deposits. Heating the brass to 600°C was an effective remover; however, this also oxidized the surface of the metal except where inhibited by fingerprint deposits. The most effective regime, and the only one of the four that removed all traces of deposit without affecting the properties of the metal surface, was immersion in warm soapy water while rubbing with a tissue. We propose this as the preferred method for fingerprint removal.     

Carbon‐Based Fingerprint Powder as a One‐Step Development and Matrix Application for High‐Resolution Mass Spectrometry Imaging of Latent Fingerprints

Carbon‐based materials are often used as matrices for matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) and its imaging (MALDI‐MSI). However, researchers have refrained from using carbon‐based fingerprint powder (CFP) as a matrix due to high background and contamination. In this work, the compatibility of CFP is reevaluated with MALDI‐MSI using a high‐resolution mass spectrometer (HRMS) and compared to traditional organic matrices. Relevant fingerprint compounds were easily distinguished from carbon cluster peaks when using HRMS. For fair comparison, half of a fingerprint was dusted with CFP while the other half was dusted with traditional organic matrices. All compounds studied had comparable, or higher, signal‐to‐noise (S/N) ratios when CFP was used as the matrix. Additionally, chemical image qualities closely followed the trend of S/N ratios. CFP proved to be an effective one‐step development and matrix application technique for MALDI‐MSI of latent fingerprints, when carbon cluster peaks are well separated by a HRMS.     

Visualization of Latent Fingerprint Corrosion of Brass

Abstract:  Visualization of latent fingerprint deposits on metals by enhancing the fingerprint-induced corrosion is now an established technique. However, the corrosion mechanism itself is less well understood. Here, we describe the apparatus constructed to measure the spatial variation (Δ V ) in applied potential ( V ) over the surface of brass disks corroded by latent fingerprint deposits. Measurement of Δ V for potential of 1400 V has enabled visualization of fingerprint ridges and characteristics in terms of this potential difference with Δ V typically of a few volts. This visualization is consistent with the formation of a Schottky barrier at the brass-corrosion product junction. Measurement of the work function of the corroded brass of up to 4.87 ± 0.03 eV supports previous results that suggested that the corrosion product is composed of p-type copper oxides. A model for the galvanic corrosion of brass by ionic salts present in fingerprint deposits is proposed that is consistent with these experimental results.     

Visualization of Latent Fingerprint Corrosion on a Discharged Brass Shell Casing

Abstract:  Latent fingerprint visualization on discharged shell casings can provide good forensic evidence, particularly if the casing is recovered at the scene of a crime where a firearm has been discharged. Unfortunately, visualization of such latent fingerprints when they were deposited prior to discharge of the firearm is problematic as both increased temperature and abrasive friction can inhibit fingerprint visualization with conventional techniques. We present a case study that demonstrates latent fingerprint visualization on a discharged shell casing recovered 14 years ago from the scene of a homicide. Previous cyanoacrylate fuming of the casing had failed to reveal any fingerprints. We use a visualization technique in which a conducting carbon powder adheres preferentially to latent fingerprint corrosion of the casing surface, following the application of a potential of 2.5 kV to the casing. This technique presents opportunities for the review of old cases and for consideration of its use in current cases.     

Evaluation of DNA Extraction Methods for Processing Fingerprint Powder-Coated Forensic Evidence

In unison, fingerprinting and DNA analysis have played a pivotal role in forensic investigations. Fingerprint powders that are available on the market can come in a range of colors and with specific properties. This study evaluated the efficiency of DNA extraction from samples coated with 3 brands of fingerprint powders: Lightning, Sirchie, and SupraNano, covering a range of colors and properties. A total of 23 fingerprint powders were tested using the Chelex, Promega DNA IQ™, and Applied Biosystems™ PrepFiler™ DNA extraction protocols. The DNA IQ™ and PrepFiler™ methods extracted higher yields of DNA in comparison to Chelex, which also accounted for better quality of PowerPlex x00AE; 21 DNA profiles recovered. There were no signs of degradation or inhibition in the quantification data, indicating that samples returning low DNA yield was due to interference during DNA extraction and not PCR inhibition. DNA profiles were recovered from the majority of fingerprint powders with only a single powder, Sirchie Magnetic Silver, failing to produce a profile using any of the methods tested. A link was observed between the DNA extraction chemistry, fingerprint powder property, that is, nonmagnetic, magnetic and aqueous, and the brand of fingerprint powder. Overall, the DNA IQ™ method was favorable for nonmagnetic fingerprint powders, while magnetic fingerprint powders produced more DNA profiles when extracted with the PrepFiler™ chemistry. This study highlights the importance of screening DNA extraction chemistries for the type of fingerprint powder used, as there is not a single DNA extraction method that suits all fingerprint powder brands and properties.     

Comparison of Chemical and Heating Methods to Enhance Latent Fingerprint Deposits on Thermal Paper

A comparison is made of proprietary methods to develop latent fingerprint deposits on the inked side of thermal paper using either chemical treatment (Thermanin) or the application of heat to the paper (Hot Print System). Results with a trial of five donors show that the application of heat produces statistically significantly more fingerprint ridge detail than the chemical treatment for both fingerprint deposits aged up to 4 weeks and for a nine sequence depletion series. Subjecting the thermal paper to heat treatment with the Hot Print System did not inhibit subsequent ninhydrin chemical development of fingerprint deposits on the noninked side of the paper. A further benefit of the application of heat is the rapid development of fingerprint deposits (less than a minute) compared with up to 12 h for the Thermanin chemical treatment.     

Recovery of DNA from Latent Fingerprint Tape Lifts Archived Against Matte Acetate

This study was driven by court order to examine methods to remove, extract, and STR‐type potential DNA entrapped between latent fingerprint lifting tape and matte acetate that was collected from a 1977 crime scene. Results indicate that recovery of appreciable quantities of DNA is more challenging once adhesive is attached to matte acetate cards and even more difficult when fixed following black powder enhancement. STR amplification of extracts from entrapped fingermarks collected following the dusting/lifting procedure did not produce robust profiles, and extraneous peaks not expressed by print donors were detected for some samples. A hearing was set to argue whether there was DNA remaining to be tested, and if so, whether that DNA could be exculpatory in this postconviction matter. The studies herein provided the basis for the court's decision to not require the testing.     

新型粉末状荧光502熏显手印荧光波段研究

目的运用新型粉末状荧光502可一步显现非渗透性光滑客体表面潜手印。为了选择最佳的激发光源和滤光镜来观察熏显后荧光效果,本文对该粉末的荧光性能进行研究。方法使用荧光光谱仪对新型粉末状荧光502进行激发光谱和发射光谱的测试,进而选择合适的激发光源及滤光镜来进行观察和拍照。结果新型粉末状荧光502的光谱范围较宽,在波长为235nm~580nm范围内均可进行激发,具有广谱性,其中对波长在530nm附近的激发光具有最大峰值,即荧光强度最大,对450nm和360nm附近的光也具有很高的吸收峰值,斯托克斯偏移量为45nm。宏观验证实验表明,在仪器分析所得的范围内,显现出的手印效果均较好。结论运用该粉末在熏显手印后可以在紫外、紫光、蓝光、黄光、绿光范围内进行激发,斯托克斯偏移大,荧光亮度高,在观察荧光效果时能够很好的消除背景荧光的干扰,也便于选择滤光镜。手印荧光效果除了受到熏显物质荧光性能的影响外,还与激发光源的品质、滤光片的透过性能以及检材固有的发光特点、客体表面性质有关。     

Faux Blood Fingermark on Pistol: Latent Fingerprint Developed by Whole Blood

We present a case of a faux blood fingermark, wherein a natural latent fingerprint on the pistol at the crime scene was enhanced by the whole blood of the victim. A male was shot to death. The crime scene investigator did not find any blood fingermark during the collection of evidence, but a blood fingerprint was noticed in the firearms examination. We identified that the fingerprint was of the victim; a series of experiments on the nonporous substrate were then conducted; the death in this case was classified as a suicide. The phenomenon is interesting, and thus, calls for attention of the forensic community.     

The Effect of Varying the Composition of Fingerprint Sweat Deposits on the Corrosion of Brass and Fingerprint Visibility

Corrosion of α‐phase brass by sebaceous sweat fingerprint deposits produced identifiable impressions in a majority of samples (n = 40) 4 days after deposition. Combining sebaceous with eccrine sweat yielded a greater percentage of identifiable fingerprint deposits, although this increase was not statistically significant. Production of identifiable fingerprints from eccrine sweat deposits was dependent on the sampling time of year with deposits taken during summer months giving similar percentages of identifiable fingerprints to sebaceous deposits. A statistically significant positive correlation was found between elapsed days after deposition and identifiable eccrine (ρ = 0.787, p < 0.05), sebaceous (ρ = 0.724, p < 0.05), and eccrine/sebaceous mixture (ρ = 0.908, p < 0.01) fingerprints deposited during summer months. The summer increase in the percentage of identifiable eccrine sweat deposits was statistically significant compared to winter eccrine deposits (p < 0.0001). Observations were consistent with results obtained from artificial sebaceous and eccrine sweat.     

Evaluation of Four Fingerprint Development Methods for Touch Chemistry Using Matrix‐Assisted Laser Desorption Ionization/Time‐of‐Flight Mass Spectrometry,

Four preparation techniques for MALDI/TOF mass spectrometry were compared to determine the ability to gather intelligence for investigations through the chemical analysis of latent fingerprints, defined as “touch chemistry.” Compatible fingerprint development processes used for identification along with new techniques are necessary to evaluate touch chemistry. Ten volunteers deposited fingerprints from solvent residues containing drugs and explosives onto microscope slides. The developers included (A) fingerprint powder, (B) MALDI matrix, (C) fingerprint powder and lifting, and (D) cyanoacrylate fuming with fingerprint powder. Qualitative identification was based on ion images and spectra. The highest average detection rates (88%) were found using methods A and B. Methods C (52%) or D (18%) had limited success. Results demonstrate the importance of imaging coupled to extracted mass spectral data in detecting analytes in deposited fingerprints. Overall, the results suggest continued development of touch chemistry applications could prove useful for gathering intelligence and forensically relevant information.     

A Comparison of Fingerprint Sweat Corrosion of Different Alloys of Brass

Fingerprint sweat from 40 donors was deposited onto samples of five α and α + β phase brasses, comprising five alloys with different copper and zinc concentrations, two of which also had the addition of small concentrations of lead. Visual grading of the visibility of the corrosion revealed that brasses with the least amount of zinc produced the most visible and fully formed fingerprints from the most donors. Consideration of previously reported mechanisms for the corrosion of brass suggests red copper (I) oxide as a likely corrosion product for low zinc brasses, and a consideration of the color, composition, and solubility of fingerprint sweat corrosion products suggests that copper (I) oxide produces good contrast and visibility with the brass substrate. Scanning electron microscope images of the corrosion of all five alloys confirmed the enhanced contrast between corroded and uncorroded areas for low zinc alloys.     

Latent Fingerprint Visualization using a Scanning Kelvin Probe in Conjunction with Vacuum Metal Deposition

The application of vacuum metal deposition before scanning Kelvin probe visualization of fingerprints is investigated. The potential contrast between fingerprint ridges and furrows is maximized by the use of silver deposition for non‐noble metals and gold–zinc deposition for noble metals. The higher susceptibility of eccrine fingerprints to vacuum metal overdeposition is confirmed. Additionally, fingerprints are best developed individually and by building the metal deposition slowly to protect against overdevelopment and variation in the rate of metal condensation. The progress of the metal deposition can be monitored using the scanning Kelvin probe by reference to the change in potential and continuity of the new potential on the surface. The use of acetic acid solution for the recovery of overVMD‐developed samples is shown not to be useful. Applying the metal deposition has the additional prospect of increasing surface conductivity and homogeneity and both can aid fingerprint visualization using the scanning Kelvin probe.