An Investigation of PCR Inhibition Using Plexor®‐Based Quantitative PCR and Short Tandem Repeat Amplification

A common problem in forensic DNA typing is PCR inhibition resulting in allele dropout and peak imbalance. In this paper, we have utilized the Plexor^® real‐time PCR quantification kit to evaluate PCR inhibition. This is performed by adding increasing concentrations of various inhibitors and evaluating changes in melt curves and PCR amplification efficiencies. Inhibitors examined included calcium, humic acid, collagen, phenol, tannic acid, hematin, melanin, urea, bile salts, EDTA, and guanidinium thiocyanate. Results were plotted and modeled using mathematical simulations. In general, we found that PCR inhibitors that bind DNA affect melt curves and C_T takeoff points while those that affect the Taq polymerase tend to affect the slope of the amplification curve. Mixed mode effects were also visible. Quantitative PCR results were then compared with subsequent STR amplification using the PowerPlex^® 16 HS System. The overall results demonstrate that real‐time PCR can be an effective method to evaluate PCR inhibition and predict its effects on subsequent STR amplifications.     

Recovery of Environmental Human DNA by Insects*,†

Abstract: We tested the hypotheses that foraging insects can acquire human DNA from the environment and that insect‐delivered human DNA is of sufficient quantity and quality to permit standard forensic analyses. Houseflies, German cockroaches, and camel crickets were exposed to dusty surfaces and then assayed for human mitochondrial and nuclear loci by conventional and qPCR, and multiplex STR amplification. Over two experiments, 100% of insect groups and 94% of dust controls tested positive for human DNA. Of 177 individuals, 33–67% tested positive and 13 yielded quantifiable human DNA (mean = 0.022 ± 0.006 ng; mean dust control = 2.448 ± 0.960 ng); four had at least one positive allele call for one or more locus; eight others showed multiple peaks at some loci. Results imply that application to routine forensic casework is limited given current detection methodology yet demonstrate the potential use of insects as environmental samplers for human DNA.     

Evaluation of Postmortem Bacterial Migration Using Culturing and Real‐Time Quantitative PCR

Postmortem bacteriology can be a valuable tool for evaluating deaths due to bacterial infection or for researching the involvement of bacteria in various diseases. In this study, time‐dependent postmortem bacterial migration into liver, mesenteric lymph node, pericardial fluid, portal, and peripheral vein was analyzed in 33 autopsy cases by bacterial culturing and real‐time quantitative polymerase chain reaction (RT‐qPCR). None suffered or died from bacterial infection. According to culturing, pericardial fluid and liver were the most sterile samples up to 5 days postmortem. In these samples, multigrowth and staphylococci were not or rarely detected. RT‐qPCR was more sensitive and showed higher bacterial positivity in all samples. Relative amounts of intestinal bacterial DNA (bifidobacteria, bacteroides, enterobacter, clostridia) increased with time. Sterility of blood samples was low during the studied time periods (1–7 days). The best postmortem microbiological sampling sites were pericardial fluid and liver up to 5 days after death.     

Evaluation of Direct PCR Amplification Using Various Swabs and Washing Reagents

DNA profiles were generated via direct amplification from blood and saliva samples deposited on various types of swab substrates. Each of the six non-FTA substrates used in this research was punched with a Harris 1.2 mm puncher. After 0.1 μL of blood or 0.5 μL saliva, samples were deposited on each of these punches, samples were pretreated with one of four buffers and washing reagents. Amplification was performed using direct and nondirect autosomal and Y-STR kits. Autosomal and Y-STR profiles were successfully generated from most of these substrates when pretreated with buffer or washing reagents. Concordant profiles were obtained within and between the six substrates, the six amplification kits, and all four reagents. The direct amplification of substrates which do not contain lysing agent would be beneficial to the forensic community as the procedure can be used on evidence samples commonly found at crime scenes.     

A LDR‐PCR Approach for Multiplex Polymorphisms Genotyping of Severely Degraded DNA with Fragment Sizes <100 bp*

Abstract: Reducing amplicon sizes has become a major strategy for analyzing degraded DNA typical of forensic samples. However, amplicon sizes in current mini‐short tandem repeat‐polymerase chain reaction (PCR) and mini‐sequencing assays are still not suitable for analysis of severely degraded DNA. In this study, we present a multiplex typing method that couples ligase detection reaction with PCR that can be used to identify single nucleotide polymorphisms and small‐scale insertion/deletions in a sample of severely fragmented DNA. This method adopts thermostable ligation for allele discrimination and subsequent PCR for signal enhancement. In this study, four polymorphic loci were used to assess the ability of this technique to discriminate alleles in an artificially degraded sample of DNA with fragment sizes <100 bp. Our results showed clear allelic discrimination of single or multiple loci, suggesting that this method might aid in the analysis of extremely degraded samples in which allelic drop out of larger fragments is observed.     

Modified Midi‐ and Mini‐Multiplex PCR Systems for Mitochondrial DNA Control Region Sequence Analysis in Degraded Samples

Two multiplex polymerase chain reaction (PCR) systems (Midiplex and Miniplex) were developed for the amplification of the mitochondrial DNA (mtDNA) control region, and the efficiencies of the multiplexes for amplifying degraded DNA were validated using old skeletal remains. The Midiplex system consisted of two multiplex PCRs to amplify six overlapping amplicons ranging in length from 227 to 267 bp. The Miniplex system consisted of three multiplex PCRs to amplify 10 overlapping short amplicons ranging in length from 142 to 185 bp. Most mtDNA control region sequences of several 60‐year‐old and 400–500‐year‐old skeletal remains were successfully obtained using both PCR systems and consistent with those previously obtained by monoplex amplification. The multiplex system consisting of smaller amplicons is effective for mtDNA sequence analyses of ancient and forensic degraded samples, saving time, cost, and the amount of DNA sample consumed during analysis.     

Investigation of Reproducibility and Error Associated with qPCR Methods using Quantifiler® Duo DNA Quantification Kit*

Abstract: Reproducibility of quantitative PCR results is dependent on the generation of consistent calibration curves via accurate volume transfers and instrument performance. A review of 14 standard curves, using two different QuantDuo^® standard DNA lots, showed variability of cycle threshold values between assays were larger than those of the Internal PCR Control (IPC). This prompted a set of experiments designed to determine the source of variability. Results showed that error introduced during DNA addition to the plate resulted in little variation. A comparison of seven independent series demonstrated cycle threshold variation between dilutions was larger than the variation expected from repeated samples. Modeling the influence of pipette errors on dilution series accuracy indicated that a more rigorous approach to external calibration curve production is required and showed that improvement in calibration curve stability is expected if the pipette conditions are carefully chosen and/or a single validated curve is utilized as the calibrator.     

Simplified Direct PCR Method for Reference Buccal Samples Using a Non-FTA Card by Omitting the Pretreatment Step

When using non-FTA cards in commercial multiplex STR kits for direct PCR, pretreatment steps with specific buffers are recommended. Here, we designed a rapid direct PCR method utilizing a non-FTA card, Oral Cell Sampling Kit, by omitting the pretreatment step involving Prep-n-Go™ Buffer, and it showed compatibility with the GlobalFiler™ Express PCR Amplification Kit, GlobalFiler™ PCR Amplification Kit, and PowerPlex^® Fusion system. To optimize the PCR conditions, we tested the method with different final PCR volumes and cycles. Finally, we conducted a performance test using 50 Korean buccal samples and confirmed the high performance of the method, detecting more than 90% of the samples with full profiles when using GlobalFiler™ PCR Amplification Kit and PowerPlex^® Fusion system at 29 cycles in a 10 μL final PCR volume. Thus, we report a simple direct PCR set-up to analyze reference samples collected using a non-FTA card manufactured in Korea.     

Forensic Imaging‐Guided Recovery of Nuclear DNA from the Spinal Cord*,†

Abstract: Our objective is to document the recovery of DNA from the spinal cord or surrounding dura mater in 11 cases of severely burned human remains. Radiographs established that portions of charred tissue contained spine segments. Multidetector computed tomography (MDCT) revealed that each spine specimen contained an intact spinal cord remnant. A full DNA profile was obtained from seven specimens using spinal cord dura mater in six specimens and spinal cord medulla in one specimen. A partial profile was obtained from four specimens (spinal cord dura mater, 2; spinal cord medulla, 2). Bone and muscle surrounding the spinal cord appear to insulate nucleic acid containing tissue from critical thermal degradation. The spinal cord, which is easily identified by MDCT examination of remains and easily recovered at the postmortem examination, can be a source of DNA with extraction yields comparable with other tissue sources. Specimens of dura mater are preferable as processing time is faster than bone.     

Effects of Cyanoacrylate Fuming,Time After Recovery,and Location of Biological Material on the Recovery and Analysis of DNA from Post‐Blast Pipe Bomb Fragments*

Abstract: This study investigated the effects of time, cyanoacrylate fuming, and location of the biological material on DNA analysis of post‐blast pipe bomb fragments. Multiple aliquots of a cell suspension (prepared by soaking buccal swabs in water) were deposited on components of the devices prior to assembly. The pipe bombs were then deflagrated and the fragments recovered. Fragments from half of the devices were cyanoacrylate fumed. The cell spots on the fragments were swabbed and polymerase chain reaction/short tandem repeat analysis was performed 1 week and 3 months after deflagration. A significant decrease in the amount of DNA recovered was observed between samples collected and analyzed within 1 week compared with the samples collected and analyzed 3 months after deflagration. Cyanoacrylate fuming did not have a measurable effect on the success of the DNA analysis at either time point. Greater quantities of DNA were recovered from the pipe nipples than the end caps. Undeflagrated controls showed that the majority (>95%) of the DNA deposited on the devices was not recovered at a week or 3 months.     

Validation of Real‐time PCR Assays for Bioforensic Detection of Model Plant Pathogens

The U.S. agricultural sector is vulnerable to intentionally introduced microbial threats because of its wide and open distribution and economic importance. To investigate such events, forensically valid assays for plant pathogen detection are needed. In this work, real‐time PCR assays were developed for three model plant pathogens: Pseudomonas syringae pathovar tomato, Xylella fastidiosa, and Wheat streak mosaic virus. Validation included determination of the linearity and range, limit of detection, sensitivity, specificity, and exclusivity of each assay. Additionally, positive control plasmids, distinguishable from native signature by restriction enzyme digestion, were developed to support forensic application of the assays. Each assay displayed linear amplification of target nucleic acid, detected 100 fg or less of target nucleic acid, and was specific to its target pathogen. Results obtained with these model pathogens provide the framework for development and validation of similar assays for other plant pathogens of high consequence.     

Assessing the Utility of Soil DNA Extraction Kits for Increasing DNA Yields and Eliminating PCR Inhibitors from Buried Skeletal Remains

DNA identification of human remains is often necessary when decedents are skeletonized; however, poor DNA recovery and polymerase chain reaction (PCR) inhibition are frequently encountered, a situation exacerbated by burial. In this research, the utility of integrating soil DNA isolation kits into buried skeletal DNA analysis was evaluated and compared to a standard human DNA extraction kit and organic extraction. The soil kits successfully extracted skeletal DNA at quantities similar to standard methods, although the two kits tested, which differ mechanistically, were not equivalent. Further, the PCR inhibitors calcium and humic acid were effectively removed using the soil kits, whereas collagen was less so. Finally, concordant control region sequences were obtained from human skeletal remains using all four methods. Based on these comparisons, soil DNA isolation kits, which quickened the extraction process, proved to be a viable extraction technique for skeletal remains that resulted in positive identification of a decedent.     

Internal Validation of Human Mitochondrial DNA Quantification Using Real‐Time PCR

The quantity of mitochondrial DNA (mtDNA) template added for amplification and subsequent dye terminator reactions is critical for obtaining quality sequence data. Validation of a human mtDNA real‐time quantitative PCR (qPCR) assay demonstrated its high degree of reproducibility and precision as well as an extremely sensitive threshold of detection (0.0001 pg/μL or approximately six human mtDNA copies/μL). A study of 35 nonprobative bone and teeth evidence samples revealed that 20 pg of mtDNA template is recommended for successful HV1 and HV2 sequence analysis; however, as little as 0.013 pg can generate a full mtDNA profile when using enhanced amplification reactions. The assay can also detect PCR inhibition and is useful for identifying samples that may benefit from re‐purification. Overall, the assay is an excellent method to quantify mtDNA and is useful for determining the best analytical approach for successful sequencing.     

Identification of Protected Avian Species Using a Single Feather Barb*,†

Abstract: We report on the unambiguous identification of protected avian species from as little as one barb of a feather. Many avian species are protected by international agreements and national legislation, yet they are traded illegally because of their high value. Two sections of the avian mitochondrial genome were chosen to identify bird species, being a 561‐bp section of ND2 gene and a 921‐bp section of the ND5 gene. Two different DNA extraction methods were compared for their ability to reliably isolate sufficient DNA to be detected in a subsequent PCR. Using a commercial kit supplied by QIAGEN, a complete sequence was obtained from one barb for the ND2 gene, whereas two barbs were required to reliably sequence the 921‐bp section of the ND5 gene. The process worked on all species tested using feathers from archival museum specimens, resulted in minimal damage to the specimen and can readily be adopted by a forensic science laboratory.     

STR Profiles from DNA Samples with "Undetected" or Low Quantifiler™ Results

Abstract:  Screening methods capable of identifying DNA samples that will not yield short tandem repeat (STR) profiles are desired. In the past, quantitation methods have not been sensitive enough for this purpose. In this study, low level DNA samples were used to assess whether Quantifiler™ has a minimum quantitation value below which STR profiles would consistently fail to be detected. Buccal swabs were obtained and the DNA extracted, quantified, and serially diluted to concentrations ranging from 0.002 to 0.250 ng/μL. Samples were analyzed once with Quantifiler™, followed by Profiler Plus™ amplification and capillary electrophoresis analysis. An absolute minimum value below which STR results were unobtainable could not be defined. From the 96 low level samples tested, STR loci (including one full profile) were successfully amplified and detected from 27% of the samples "undetected" by Quantifiler™. However, no STR alleles were detected in 73% of these "undetected" samples, indicating that Quantifiler™ data may be useful for predicting STR typing success.     

Quantifiler observations of relevance to forensic casework

The Quantifiler (QF) kit is regularly used by forensic scientists for DNA quantitation. We performed in-house validation studies which revealed some interesting observations. The QF standard displayed a two-fold difference between two different lot numbers which suggests that every standard should be tested prior to use. The Promega K562 DNA standard works well with the QF kit. c. 41% of samples that inhibited the internal PCR control (IPC) system within the QF kit still produced good Profiler Plus reactions. QIAquick was effective at removing inhibitors. The presence of dyes within casework samples were observed not to inhibit QF amplifications. Template DNA greater than 100 ng/muL appeared to inhibit the IPC. Close to identical concentration results were obtained when alternative analysis settings were used. These validation findings will assist DNA processes involved in forensic casework.     

Age Estimation in Living Egyptians Using Signal Joint T‐cell Receptor Excision Circle Rearrangement

Age estimation is one of the challenges in forensic sciences. There are many techniques to estimate the age. Molecular biology approach is one of these techniques. Signal joint T‐cell receptor excision circles gene (sjTRECs), is one of this approach. We aimed to use sjTRECs as a suitable marker for age estimation among Egyptian population. TaqMan qPCR approach was used to quantify sjTREC levels in blood samples obtained from 153 healthy Egyptian individuals ranging from a few weeks to 70 years. Our results showed a significant negative correlation between sjTREC levels and age with p ≤ 0.05. Moreover, the individual's age can be determined through this formula Age = ?30.671+ (?5.998Y) (Y is dCtTBP ? sjTREC) with standard error ±7.35 years. Within the forensic context, sjTREC' levels can be used to estimate the Egyptian individual's age accurately.     

High‐Throughput STR Analysis for DNA Database Using Direct PCR,

Since the Korean criminal DNA database was launched in 2010, we have focused on establishing an automated DNA database profiling system that analyzes short tandem repeat loci in a high‐throughput and cost‐effective manner. We established a DNA database profiling system without DNA purification using a direct PCR buffer system. The quality of direct PCR procedures was compared with that of conventional PCR system under their respective optimized conditions. The results revealed not only perfect concordance but also an excellent PCR success rate, good electropherogram quality, and an optimal intra/inter‐loci peak height ratio. In particular, the proportion of DNA extraction required due to direct PCR failure could be minimized to <3%. In conclusion, the newly developed direct PCR system can be adopted for automated DNA database profiling systems to replace or supplement conventional PCR system in a time‐ and cost‐saving manner.     

The Classification of Inkjet Inks Using AccuTOF™ DART™ (Direct Analysis in Real Time) Mass Spectrometry—A Preliminary Study

A novel approach for the analysis of inkjet inks is being reported. A time‐of‐flight mass spectrometer, coupled with a Direct Analysis in Real Time (DART?) ion source (AccuTOF? DART?), was used to determine if inkjet inks from various manufacturers and models of printers could be reliably differentiated, characterized, and identified. A total of 217 ink standards were analyzed. As inkjet printing often involves the use of multiple colors (e.g., cyan, magenta, yellow, and black) to form an image or text, two different approaches to creating a library of standards and sampling methods were evaluated for implementation in a standard operating procedure. This research will show that a microscopic examination of the region of interest is requisite to identify what colors were utilized during the printing process, prior to comparing with known standards. Finally, blind testing was administered with 10 unknown samples to assess the validity and accuracy of the methodology.     

A Four‐Stage Method of Age at Death Estimation for Use in the Subadult Rib Cortex*,†

Abstract: Age estimation in the subadult skeleton can be rather precise when the epiphyses and dentition are present, but incomplete or commingled remains still present a challenge. Histomorphometric age‐at‐death estimation methods developed for use on adults are based on the age‐associated accumulation of osteons. In the growing skeleton, there is a poor correlation between osteon numbers and age until the latter half of the second decade. As a result, there has been no histological aging method for use in subadults. The analysis of the rib cortex of 72 subadults ranging in age from 2 to 21 years has identified a series of developmental changes in the bone microstructure that can be used to estimate age. This qualitative method utilizes the systematic changes in rib cortical morphology to classify ribs into one of four age phases. This method can be applied to immature skeletons in forensic, archaeological, and paleontological contexts.