蓝色电工胶带的扫描电镜／能谱法检验

目的研究不同品牌蓝色电工胶带的检验方法。方法利用扫描电镜／能谱法对蓝色电工胶带进行检验。结果11个厂家生产的15种品牌的蓝色电工胶带组成的105组样品对有104组可以区分,区分率达到99．0％。结论扫描电镜／能谱法能够区分绝大多数蓝色电工胶带,该方法具有操作简便、快速、结果准确的优点,能够用于同色电工胶带的鉴别。     

Visualising latent DNA on tapes

This study reports a simple method for visualising and screening latent DNA on tapes using a Diamond™ dye (DD) staining process followed by visualisation using a portable fluorescence microscope. Ten types of tapes were tested, which include those used currently by forensic laboratories for tape-lifting. All ten types were tested for: 1) their auto-fluorescence, 2) properties when stained with DD using three different DD solutions, and 3) PCR inhibition through a direct STR amplification technique. No background fluorescence was noted viewing four types stained with 20 x DD diluted with 0.01% Triton-X. Clear tape (Sellotape®), DNA-free tape (Lovell Surgical Solutions) and brown packing tape (Packmate™) did not inhibit direct STR amplification, while the other six types showed the inhibition of the PCR. The three tapes were selected to assess their cellular material recovery efficiency by comparing the number of stained cells within an entire fingermark before and after tape-lifting. Tape-lifting was performed either once, twice or ten times. The DNA-free tape (Lovell) used in many forensic laboratories gave poor recovery compared to the clear tape (Sellotape®) and brown packing tape (Packmate™). This simple visualising technique allows the cell location to be recorded, and only the area of tape where cells are present to be removed for DNA typing. The process is a simple and effective triage procedure that reduces the processing of tape-lift samples where there are no cells present.     

Forensic utility of carbon isotope ratio variations in PVC tape backings

Forensic interest in adhesive tapes with polyvinyl chloride (PVC) backings (electrical tape) derives from their use in a variety of illicit activities. Due to the range of physical characteristics, chemical compositions, and homogeneity within a single roll of tape, traditional microscopic and chemical analyses can offer a high degree of discrimination between tapes, permitting the assessment of potential associations between evidentiary tape samples. The carbon isotope ratios of tapes could provide additional discrimination among tape samples. To evaluate whether carbon isotope ratios may be able to increase discrimination of electrical tapes, particularly with regards to different rolls of tape of the same product, we assessed the δ(13)C values of backings from 87 rolls of PVC-based black electrical tape (~20 brands, >60 products) Prior to analysis, adhesives were removed to prevent contamination by adhering debris, and plasticizers were extracted because of concern over their potential mobility. This result is consistent with each of these tapes having approximately the same plasticizer δ(13)C value and proportion of carbon in these plasticizers. The δ(13)C values of the 87 PVC tape backings ranged between -23.5 and -41.3 (‰, V-PDB), with negligible carbon isotopic variation within single rolls of tape, yet large variations among tape brands and tape products. Within this tape population, carbon isotope ratios permitted an average exclusion power of 93.7%, using a window of +/-0.3‰; the combination of carbon isotope ratio measurement with additional chemical and physical analyses raises the discrimination power to over 98.9%, with only 41 out of a possible 3741 pairs of tape samples being indistinguishable. There was a linear relationship between the δ(13)C value of tape backings and the change in δ(13)C value with the extraction of plasticizers. Analyses of pre- and post-blast tape sample pairs show that carbon isotope signatures are within 0.3‰ of pre-blast values, indicating that carbon isotope values are largely preserved during an explosion.     

Raman identification of drug of abuse particles collected with colored and transparent tapes

Raman microscopy is a useful tool for the analysis of drug particles collected with adhesive tapes. In this work, first, the spectra of thirty drugs of abuse, degradation products, metabolites, and common cutting agent standards were recorded and the Raman bands observed were summarized providing the forensic analyst useful information for the identification of drug evidence. Then, the collection of different drug particles by a fingerprint lifting tape commonly used to remove and store fingerprints and fibers, and a white and green packaging tape, followed by the subsequent identification of the drugs by confocal Raman spectroscopy was performed. The particles were analyzed on top of the tapes, trapped between glass slides and the tapes, trapped in the tape folded over itself in the case of the transparent tape, and after folding and unfolding the tape in the case of the colored tape. The results obtained by the different approaches show that both tapes did not compromise the drugs spectra. However, the use of transparent tape is preferred because this tape allows the previous visual detection of the particles. Finally, several drug and sugar particles were spread over a clean table and inside a pocket, and the particles were collected with transparent tape and then properly identified. Although good results were obtained in both cases, the amount of fibers and other substances present in the collection area made the previous detection of the particles difficult and increases the analysis time.     

Analysis of pressure sensitive adhesive tape: I. Evaluation of infrared ATR accessory advances

Attenuated total reflection (ATR), also known as internal reflection spectroscopy (IRS), is a forensically accepted method for infrared (IR) analysis of pressure sensitive adhesive tapes. Advancements of ATR accessories in the last decade have provided the forensic examiner several ATR methods to choose from. These accessories offer a variety of ATR crystal choices with a variety of prices and capabilities. Four different types of pressure sensitive adhesive tapes including duct tape, electrical tape, packaging tape and office tape have been used to compare six different ATR methods. Each of the methods tested offers both benefits and limitaltions which must be considered for the type of sample to be analyze. The intent of this paper is to assist the reader in better understanding ATR techniques, the many differences among currently available ATR accessories and how the method is applied to the analysis of pressure sensitive adhesive tape.     

Adhesive tape analysis: establishing the evidential value of specific techniques

This study investigated the evidential value of specific methods of analysis for packaging tapes and clear adhesive tapes available in Australia. Fifty-eight adhesive tapes were analyzed using a wide range of optical, physical, and chemical techniques. The results were collated for the purpose of creating an Australian database of adhesive tapes, which would be of assistance in criminal investigation. Each technique was evaluated for its discriminating power, both for comparative purposes and for the identification of adhesive tapes by comparing unknown samples with the database. The combined discriminating power of the techniques applied is very high. It is possible to individually identify the source of an unknown adhesive tape sample in many instances by searching the database. It is also possible to form an opinion on the significance of a failure-to-discriminate result in comparative casework. Further work is still needed to expand and update the database, as well as compiling data on the relative market share of various products.     

Identification of pressure-sensitive adhesive polypropylene tape

Identification of colorless, transparent, pressure-sensitive adhesive polypropylene tape (PP tape) was performed using infrared absorption spectrometry (IR) and pyrolysis gas chromatography mass spectrometry (Py-GC/MS) to determine the pressure-sensitive adhesive. Twenty different products of colorless, transparent PP tapes were examined in this study, and the results of analysis of IR spectra and Py-GC/MS were classified into twelve groups. In addition, the tapes were classified into 14 groups on the basis of IR measurement of release agent present in the backside. The results indicate that colorless, transparent PP tapes can be distinguished in terms of manufacturer, thereby demonstrating that this method of identifying colorless, transparent PP tape is effective. Moreover, the method was applied to the analysis of an actual forensic sample.     

Fingerprints and DNA: STR typing of DNA extracted from adhesive tape after processing for fingerprints

An exhibit that is often received for examination in cases of robbery or terrorist activity is adhesive tape. This type of exhibit can often, but not always, be successfully processed for fingerprints. The question arises whether or not it is possible to extract and type DNA after the tape has been sequentially processed for fingerprints. In this work, various donors left fingerprints on the adhesive side of tapes. The tapes were then sequentially processed for fingerprints using an alternate light source, cyanoacrylate fuming, and staining with BY-40 and then crystal violet. DNA was subsequently successfully extracted, amplified and typed for six STR loci.     

同色电工胶带的光谱成像技术检验

目的研究同种颜色电工胶带的区分方法。方法应用光谱成像技术对同色（选取红、黄、蓝、绿4种颜色）不同品牌的电工胶带进行区分。结果蓝色电工胶带的区分率最高,达到99.0%,红色、绿色、黄色样品的区分率相差不大,分别为94.3%、93.8%及93.3%。结论光谱成像技术可以实现同种颜色电工胶带的快速区分,从色度学角度为法庭科学领域电工胶带物证的区分提供了一种新的方法。     

Optimisation of cellular DNA recovery from tape-lifts

Adhesive tape-lifts are a commonly used technique for the recovery of DNA from forensic exhibits. Examination of large forensic exhibits or tape-lifts from old “cold” cases can make the direct submission of the tapes for extraction difficult. By applying a swab loaded with an organic solvent to the tape-lift, any DNA bound to the tape can be transferred and concentrated on to the swab head. Whilst removing any DNA, the tape's glue adhesive is also transferred. This requires a modified extraction technique that can dissolve the adhesive whilst maintaining the integrity of any DNA. Of several solvents tested, xylene was shown to be the solvent of choice, efficiently removing the adhesive and any bound DNA. A modified chelex extraction method, again incorporating xylene, provided optimal conditions for dissolving the adhesive and releasing the DNA for lysis.     

Selection of an adhesive tape suitable for forensic fiber sampling

Five commercial adhesive tapes were tested for fiber uptake and saturation, for recovery and for ease of analysis. On the basis of the results, a high tack adhesive tape has been selected to be used for forensic fiber sampling. This adhesive tape is used as sampling material in two different micro trace kits. The first tape lifting kit is used mainly for the sampling of cars and the second is a 1:1 tape lifting kit for the collection of fibers on a corpse.     

Identification and Comparison of Electrical Tapes Using Instrumental and Statistical Techniques: II. Organic Composition of the Tape Backing and Adhesive*

Abstract: The microtexture and elemental composition of the backing of electrical tapes have been shown to be highly discriminating. In this study, the organic composition of electrical tape was evaluated as a complementary means of distinguishing tape brands. The backing and adhesive of 72 rolls of electrical tape were analyzed via Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR FTIR) and discriminant analysis was used to classify all samples by brand. Generally, the accuracy for FTIR data (88–99%) was higher than that for elemental data (86–94%). FTIR spectra from the adhesive layer were the most discriminating. In separate studies, two fragments of blast-damaged tape were correctly assigned to their brand of origin and discriminant analysis was used to quantitatively associate or exclude tape samples from two bombing cases.     

掺杂Cd的水溶性荧光ZnSe/MPA量子点显现胶带手印方法

目的探索水溶性荧光量子点溶液——掺杂镉的硒化锌（ZnxCd（1-x）Se）对胶带手印的显现方法。方法以巯基丙酸（MPA）为修饰剂合成了掺杂Cd的水溶性荧光ZnSe/MPA量子点,利用它显现水浸胶带及粘连胶带上的油汗指印,并在365nm下拍照成像。结果良好的显现出水浸胶带上的指印以及粘连胶带上的指印。与常规方法相比,优势更为明显。结论水溶性荧光量子点ZnxCd（1-x）Se溶液显出的指印纹线细腻流畅,在法庭科学领域具有很好的应用前景。     

Examination of writings concealed by black pressure sensitive adhesive tape

Examination of concealed writing is often a challenge for forensic document examiners. Although the published literature describes many techniques, these are often only successful when the writing has been concealed by pencil, pen, or by spreading inks of different tint or by smearing of the writing with colored fluids. When black pressure sensitive adhesive (PSA) tape is used, these procedures are ineffective. The present report describes the use of a straight chain hydrocarbon to remove the PSA tape and allow a comparison of the concealed writing with that of a suspect. The use of the solvent had no observable effect on either the writing or the substrate. The procedure is rapid and easy to use and is also effective with other colored PSA tapes.     

Enhancing contrast of fingerprints on plastic tape

Many of the currently available fingerprinting methods have limited ability to visualize fingerprints on plastic tape without expensive equipment or significant handling of the sample. This is especially true for visualizing fingerprints on black electrical tape. This study sought a hands-off method to produce easy visualization of fingerprints on different types of plastic tape, including black electrical tape, without the need for expensive equipment. The methods selected were to sublime disperse dyes into the tape, both with and without the fuming of cyanoacrylate, everywhere except for where the fingerprint was applied. The resulting color contrasts provided enough differentiation to visualize fingerprints on plastic tape under ambient light. Sequential fuming with cyanoacrylate followed by disperse dyes provided the best visualizations on all tapes, and cyanoacrylate followed by disperse yellow 211 clearly visualized fingerprints on black electrical tape.     

A discrimination method for paper by Fourier transform and cross correlation

A non-destructive method for discriminating between different types of paper has been proposed, using image analysis, Fourier transformation, and cross-correlation matching. A fast Fourier transform (FFT) is used to extract the periodicity in the structure of paper that results from the manufacturing processes. The light-transmission images of the paper to be Fourier transformed are obtained from a flatbed image scanner. The similarity between the power spectrum of the FFT of the sample and that of a reference is quantified using a cross-correlation matching method. An advantage of using frequency analysis is that periodicity can be detected even if the sample is damaged or is printed on. The technique works on samples as small as 2 cm2.     

Chemical fingerprinting of adhesive tapes by GCMS detection of petroleum hydrocarbon products

Pressure-sensitive adhesive tapes often represent key evidence of crimes such as assault, rape or homicide; thus, the development of analytical techniques able to contribute to a detailed characterization of these materials is of forensic importance. The gas chromatography-mass spectrometry (GCMS) analysis of the solvent extractable fractions of a suite of electrical and gaffer adhesive tapes spanning a range of colors and manufacturers identified a number of petroleum-derived hydrocarbons. Molecular and isotopic analyses of hydrocarbon constituents of complex materials have found wide analytical utility including the forensic investigation of oil spills and arson. Here, we investigate the utility of these techniques for characterizing the hydrocarbon composition of pressure-sensitive adhesive tapes for forensic correlation purposes. Subtle distinction of tape samples was evident in the GCMS distribution of several hydrocarbon groups including alkyl-naphthalenes, hopane and sterane biomarkers. Linear discriminant analysis of the abundances of these products provided high level differentiation of tape manufacturer. The distinction of different adhesive tape samples was further extended by measurement of their stable carbon isotopic values. The molecular and isotopic differences of the petroleum content of tapes are consistent with the use of different petroleum materials used in the manufacturing process and demonstrate the benefits of the combined use of complementary oil hydrocarbon characterization approaches. This study reveals the forensic potential of using established petroleum characterization methods for characterizing materials with a petroleum-derived hydrocarbon element.     

A comparison of efficiency of manual and automatic fibres search with the Maxcan fibre finder

The aim of this work was to study the efficiency of automatic fibre searching with the Maxcan fibre finder (Cox Analytical Systems, Sweden) in comparison to manual searching. The influence of some parameters (color, thickness, background noise) on the results of a fibre search was considered. Eighteen experimental tapes with different target fibres and different background noises were prepared in the laboratory. Searching of fibres was performed manually and with the Maxcan fibre finder by different operators from four European laboratories. Two laboratories have the Maxcan fibre finder system and the two instruments were used and compared in this study. The results show that searching with the Maxcan is generally as efficient as manual searching, except for very pale or very dark fibres. Note that the tapes used for these experiments were prepared in laboratory, and are not completely representative of the tape that could be obtained in real cases. To generalize the results obtained, further research on real case samples would be necessary.     

A comparison of efficiency of manual and automatic fibres search with the Maxcan fibre finder

The aim of this work was to study the efficiency of automatic fibre searching with the Maxcan fibre finder (Cox Analytical Systems, Sweden) in comparison to manual searching. The influence of some parameters (color, thickness, background noise) on the results of a fibre search was considered. Eighteen experimental tapes with different target fibres and different background noises were prepared in the laboratory. Searching of fibres was performed manually and with the Maxcan fibre finder by different operators from four European laboratories. Two laboratories have the Maxcan fibre finder system and the two instruments were used and compared in this study. The results show that searching with the Maxcan is generally as efficient as manual searching, except for very pale or very dark fibres. Note that the tapes used for these experiments were prepared in laboratory, and are not completely representative of the tape that could be obtained in real cases. To generalize the results obtained, further research on real case samples would be necessary.     

The Use of Adhesive Tape for Recovery of DNA from Crime Scene Items

Abstract: The selection of the appropriate method of collection of biological material from crime scene items can be crucial to obtaining a DNA profile. The three techniques commonly used for sampling items are: cutting, swabbing, and taping. The tape sampling technique offers an advantage, in that it enables the collection of a potentially highly informative source of DNA, shed epithelial cells, from selected areas on crime scene items (the inside fingers of a glove, for instance). Furthermore, surface collection of biological material by taping reduces co‐sampling of known PCR inhibitors such as clothing dyes. The correct choice of tape for crime scene item sampling is important. Not all tapes are suitable for biological trace evidence collection as well as DNA extraction. We report on one tape that met both these criteria. Three different cases are presented which demonstrate the usefulness of adhesive tape sampling of crime items. Finally, the advantages of the tape collection technique are discussed and guidelines for preferred areas of tape sampling on various casework items are presented.