Contactless Visualization of Latent Fingerprints on Nonporous Curved Surfaces of Circular Cross Section

Nondestructive techniques for gathering evidence are important in the field of forensics. Due to the geometry of the substrates, nondestructive visualization of fingermarks on curved surfaces remains challenging. A novel contactless technique was developed for visualizing and recording fingermark patterns on nonporous curved surfaces of circular cross section. The technique utilizes a plane mirror to transmit rays from a light source to illuminate the area of interest for fingermark visualization. The fingermark acquisition system consists of a digital single‐lens reflex (SLR) camera, a plane mirror, and a white light source. Mathematical equations are used to calculate the mirror size. Experiments were performed on various curved surfaces to determine the feasibility and effectiveness of the technique. Spectral Image Validation and Verification (SIVV) was used to analyze the captured images. The results of this study indicate that the technique described here is able to reveal fingermark patterns on curved surfaces of circular cross section.     

利用CdSe巯基乙酸溶液显现水浸客体表面潜手印

目的研究水浸客体表面潜指纹的显现方法;方法利用CdSe巯基乙酸溶液显现被水浸泡过的黄色封箱胶带、黑色塑料袋、玻璃等常见非渗透性客体上的潜手印,讨论影响水浸非渗透性客体上潜手印显现效果的各种因素,并与传统方法进行比较,初步探讨了CdSe巯基乙酸溶液显现水浸非渗透性客体表面潜手印的方法;结果使用巯基乙酸包覆CdSe纳米复合材料显现潜在手印,使每分子纳米复合材料外表包覆足够数量的羧基,则可以提高它同手印残留物的结合能力,从而得到更高清晰度、更高分辨率的手印显像;结论巯基乙酸包覆CdSe纳米复合材料可以很好的显现水浸塑料、胶带等表面潜指纹。     

The application of infrared chemical imaging to the detection and enhancement of latent fingerprints: method optimization and further findings

Fourier transform infrared (FTIR) chemical imaging allows the collection of fingerprint images from backgrounds that have traditionally posed problems for conventional fingerprint detection methods. In this work, the suitability of this technique for the imaging of fingerprints on a wider range of difficult surfaces (including polymer banknotes, various types of paper, and aluminum drink cans) has been tested. For each new surface, a systematic methodology was employed to optimize settings such as spectral resolution, number of scans, and pixel aggregation in order to reduce collection time and file-size without compromising spatial resolution and the quality of the final fingerprint image. The imaging of cyanoacrylate-fumed fingerprints on polymer banknotes has been improved, with shorter collection times for larger image areas. One-month-old fingerprints on polymer banknotes have been successfully fumed and imaged. It was also found that FTIR chemical imaging gives high quality images of cyanoacrylate-fumed fingerprints on aluminum drink cans, regardless of the printed background. Although visible and UV light sources do not yield fingerprint images of the same quality on difficult, nonporous backgrounds, in many cases they can be used to locate a fingerprint prior to higher quality imaging by the FTIR technique. Attempts to acquire FTIR images of fingerprints on paper-based porous surfaces that had been treated with established reagents such as ninhydrin were all unsuccessful due to the swamping effect of the cellulose constituents of the paper.     

Use of nitrogen cryogun for separating duct tape and recovery of latent fingerprints with a powder suspension method

Duct tape is sometimes recovered as physical evidence in crimes. The purpose of this study was to determine the quality of latent prints on the adhesive and non-adhesive surfaces of duct tape samples that were separated using three methods. Three hundred donor fingerprint impressions were deposited on duct tape. Sections of duct tape were affixed to sections of cardboard and a fingerprint placed on the non-adhesive surface of the tape. A second layer of duct tape was prepared and a fingerprint placed on the adhesive side of the tape and then the tape was affixed to the piece of tape on the cardboard. After a 24-h period, the samples were separated using gradual force, liquid nitrogen applied with a cryogun and an adhesive neutralizer to separate the layers of tape. The recovered fingerprints were processed with a fingerprint powder suspension method. The recovered fingerprint images were evaluated and rated as +1, +2, or +3. The liquid nitrogen spray separation method yielded the highest number of +3 prints.     

Fluorescence of a Natural Fluorophore as a Key to Improve Fingerprint Contrast Image

The optical and morphological properties of resveratrol were investigated. This nontoxic fluorescent natural material, emitting in the visible blue light, was used as an optical marker, enabling the enhancement of the image contrast coming from relief pictures marked on challenging surfaces. By applying appropriated imaging softwares, this marker was verified to be very useful in the latent fingerprint recognition deposited on different wood surface types, mainly those with high level of roughness, where conventional forensic materials do not allow effective fingerprint image visualization.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

The detection and enhancement of latent fingermarks using infrared chemical imaging

The use of a new technique, Fourier transform infrared (FTIR) chemical imaging, has been demonstrated for the enhancement of latent fingermarks on a number of surfaces. Images of untreated fingermarks on glass backgrounds with excellent ridge detail were acquired using infrared chemical imaging. High quality fingermarks on glass backgrounds were also developed using ethyl cyanoacrylate (super glue) fuming and subsequent infrared chemical imaging. This new method allows the collection of images from backgrounds that traditionally pose problems for current fingermark detection methods. The background may, for example, be highly colored, have a complex pattern, or possess other pattern or image characteristics that make it difficult to separate fingermark ridges using traditional optical or luminescent visualization. One background that has proven to be a challenging surface for the development of latent fingermarks is the Australian polymer banknote. To demonstrate the power and applicability of infrared chemical imaging, fingermarks fumed with ethyl cyanoacrylate were successfully imaged from Australian polymer banknotes.     

Magnetic Fingerprint Powder from a Mineral Indigenous to Thailand

Abstract: A study was conducted to investigate whether natural magnetite (Fe₃O₄), which is an abundant mineral in Thailand, could be used as a magnetic powder in the detection of latent fingerprints. Because of the presence of impurities, powdered magnetite is only weakly attracted by a magnet and cannot be used as a magnetic fingerprint powder by itself. Mixing a small amount of magnetite powder with nickel powder greatly enhances the magnetic attraction. A mixture of magnetite powder and nickel powder in a mass ratio of approximately 1:100 was found to be suitable for use as a magnetic fingerprint powder. Fingerprints developed using the magnetite/nickel mixture on nonporous surfaces were found to exhibit good adherence and clarity. Using an automated fingerprint identification system, the number of minutiae detected in fingerprints developed by using the prepared powder on nonporous surfaces was found to be comparable to those detected in fingerprints developed by using a commercial black magnetic powder. The cost is lowered by more than 60%.     

Fluorescent TiO2 powders prepared using a new perylene diimide dye: applications in latent fingermark detection

A new, highly fluorescent dye was synthesised using oleylamine combined with a perylene dianhydride compound. The new dye was characterised by 1H NMR, UV-vis spectroscopy and fluorescence spectroscopy as well as quantum yield. The dye was absorbed onto titanium dioxide nanoparticles for use as a fingerprint detection powder. The new fluorescent powder was applied to latent fingermarks deposited onto different non-porous surfaces and compared with commercial fluorescent powders. The powder exhibits strong fluorescence at 650-700 nm under excitation at 505 nm. On glass surfaces, the new powder gave images showing tertiary-level detail of the fingermark ridges with almost no background development. Compared with current magnetic fluorescent powders, the new powder was slightly weaker in fluorescence intensity but produced significantly less background development, resulting in good contrast between the fingermark and the substrate.     

Infrared spectroscopic imaging for noninvasive detection of latent fingerprints

The capability of Fourier transform infrared (FTIR) spectroscopic imaging to provide detailed images of unprocessed latent fingerprints while also preserving important trace evidence is demonstrated. Unprocessed fingerprints were developed on various porous and nonporous substrates. Data-processing methods used to extract the latent fingerprint ridge pattern from the background material included basic infrared spectroscopic band intensities, addition and subtraction of band intensity measurements, principal components analysis (PCA) and calculation of second derivative band intensities, as well as combinations of these various techniques. Additionally, trace evidence within the fingerprints was recovered and identified.     

Comparative study of electrochromic enhancement of latent fingerprints with existing development techniques

To address the challenge of capturing latent fingerprint evidence from metal surfaces, a new method of latent fingerprint enhancement based on electrochromic polymer films has recently been developed. Here, we present a study comparing the development and visualization of nonvisible fingerprints on stainless steel substrates using this electrochromic enhancement approach with three classical methods (dusting, wet powder, and cyanoacrylate fuming). Two variants of the electrochromic enhancement method were utilized with polyaniline and poly(3,4-ethylenedioxythiophene) as the electrochromic materials. Fingerprint samples were taken from different donors (varying in age and gender) and were exposed to different environments for systematically varied periods of time (up to 28 days). The environments represent plausible evidential scenarios: left under ambient conditions, washed with aqueous soap solution, washed with acetone, submerged in water, and maintained at elevated temperature. The electrochromic enhancement procedure frequently outperformed the traditional methods, particularly for samples exposed to more challenging histories.     

ZnS和ZnS:Cu无机紫外荧光材料的制备及其在汗潜手印显现中的应用

目的制备荧光强度高、客体适用性广、显现效果优良且合成方法简单的ZnS及ZnS:Cu无机紫外荧光材料,并将其用于汗潜手印的显现。方法通过一步溶液反应共沉淀法制备ZnS无机紫外荧光材料,并在ZnS材料中加入Cu^2+得到ZnS:Cu以改善荧光性质,将其应用于普通客体(白色捺印纸、载玻片、铁架台、乳白色花纹瓷砖表面、磨砂化学实验台面、不锈钢表面)和复杂客体(拼色花纹瓷砖、农夫山泉塑料标签和杂志封面铜版纸)上汗潜手印的显现,并与传统荧光粉末显现效果进行对比。结果ZnS材料具有荧光性,并且在ZnS材料中掺杂Cu^2+后得到的ZnS:Cu材料荧光强度增强,荧光光谱范围变广,稳定性提升。显现汗潜手印时,适用客体范围更广,并且可通过调节激发光的波长呈现不同的显现效果。结论通过在无机荧光材料ZnS中掺杂Cu^2+可改善材料的荧光范围,从而得到适用于不同客体上汗潜手印显现且效果更好的ZnS:Cu无机紫外荧光材料。     

胺端基型CdS／PAMAM潜在显现指印的应用

目的探索一种新型纳米荧光材料的制备方法及其在潜在指印显现方面的应用前景。方法以聚酰胺-胺（PAMAM）树形分子为模板，原位合成CdS纳米簇。并使用荧光光谱法对产物进行表征：应用这种新型荧光材料对多种客体表面、不同陈旧程度的潜在指印进行显现．并将显现结果与传统荧光染料进行比对。结果该荧光材料在365nm紫外光激发下可以发出很强的可见荧光：与传统的荧光染料相比。-NH2端基型CdS／PA—MAM可以同指印残留物进行靶向结合．其荧光强度高、背景干扰小，指印纹线与客体反差大。结论-NH2端基型CdS／PAMAM可以有效地显出非渗透性客体表面的潜在指EP。     

Development of latent fingermarks by aqueous electrolytes

In this work we present our observations on the interaction between metallic (copper, aluminum, iron, brass, zinc) and non-metallic (glass and plastic) surfaces bearing latent fingermarks and several aqueous electrolytic solutions. Good quality fingermarks could be observed on some of the metallic and even on non-metallic surfaces after such treatment. The influence of factors such as time interval from deposition, pH of the electrolytes, wiping the latent marks prior to processing and the presence of a second metal on the quality and permanence of the developed impressions have been studied. As a rule, sebaceous marks provided much better quality impressions on all the surfaces. Initial explanations based on electrochemical processes are suggested.     

Enhanced Visualization of Latent Fingermarks on Rough Aluminum Surfaces Using Sequential Au and Zn/ZnS/ZnO Depositions

Detection and visualization of fingermarks on rough and diffuse surfaces is a relatively challenging task. We succeeded in developing latent fingermarks on scratched and rough aluminum surfaces by sequential deposition of a thin layer of gold followed by one of zinc or zinc‐based compounds on the fingermarks. The best image enhancement was achieved with sequential Au and ZnS depositions. Using this combination, we could enhance the visualization of latent fingermarks aged over 65 days in normal conditions. The optical reflectance from the fingermarks with the deposited layers of metal/dielectric is analyzed as a stratified medium. Significant contrast in the reflectance from the regions of the ridges and the valleys of the fingermark would enhance the visualization. Our results show that the Au and ZnS bi‐layer combination can have a large reflection contrast and improved fingermark visualization at wavelengths corresponding to the green light for specific thickness of ZnS.     

Visualization of Latent Fingerprint Corrosion on a Discharged Brass Shell Casing

Abstract:  Latent fingerprint visualization on discharged shell casings can provide good forensic evidence, particularly if the casing is recovered at the scene of a crime where a firearm has been discharged. Unfortunately, visualization of such latent fingerprints when they were deposited prior to discharge of the firearm is problematic as both increased temperature and abrasive friction can inhibit fingerprint visualization with conventional techniques. We present a case study that demonstrates latent fingerprint visualization on a discharged shell casing recovered 14 years ago from the scene of a homicide. Previous cyanoacrylate fuming of the casing had failed to reveal any fingerprints. We use a visualization technique in which a conducting carbon powder adheres preferentially to latent fingerprint corrosion of the casing surface, following the application of a potential of 2.5 kV to the casing. This technique presents opportunities for the review of old cases and for consideration of its use in current cases.     

The Recovery of Latent Fingermarks from Evidence Exposed to Ionizing Radiation*

Abstract: Continual reports of illicit trafficking incidents involving radioactive materials have prompted authorities to consider the likelihood of forensic evidence being exposed to radiation. In this study, we investigated the ability to recover latent fingermark evidence from a variety of substrates that were exposed to ionizing radiation. Fingermarks deposited on common surfaces, including aluminum, glass, office paper, and plastic, were exposed to doses ranging from 1 to 1000 kGy, in an effort to simulate realistic situations where evidence is exposed to significant doses of radiation from sources used in a criminal act. The fingermarks were processed using routine fingermark detection techniques. With the exception of glass and aluminum substrates, radiolysis had a considerable effect on the quality of the developed fingermarks. The damage to ridge characteristics can, in part, be attributed to chemical interactions between the substrate and the components of the fingermark secretions that react with the detection reagents.     

A scanning beam time-resolved imaging system for fingerprint detection

A highly sensitive confocal scanning-beam system for time-resolved imaging of fingerprints is described. Time-resolved imaging is a relatively new forensic procedure for the detection and imaging of latent fingerprints on fluorescent substrates such as paper, cardboard, and fluorescent paint. Ordinary fluorescent imaging of latent fingerprints on these surfaces results in poor contrast. Instead, the specimens are treated with a phosphorescent dye that preferentially adheres to the fingerprint which allows time-resolved discrimination between the fingerprint phosphorescence and the background fluorescence. Time resolved images are obtained by synchronizing the digital sampling of the specimen luminescence with the on-off cycle of the chopped illumination beam. The merit of this technique is illustrated with high contrast images of fingerprints obtained from the fluorescent painted surface of a Coke can.     

Faux Blood Fingermark on Pistol: Latent Fingerprint Developed by Whole Blood

We present a case of a faux blood fingermark, wherein a natural latent fingerprint on the pistol at the crime scene was enhanced by the whole blood of the victim. A male was shot to death. The crime scene investigator did not find any blood fingermark during the collection of evidence, but a blood fingerprint was noticed in the firearms examination. We identified that the fingerprint was of the victim; a series of experiments on the nonporous substrate were then conducted; the death in this case was classified as a suicide. The phenomenon is interesting, and thus, calls for attention of the forensic community.     

新型亲油性纳米二氧化硅粉末在手印显现中的应用

目的 比较新型亲油性纳米二氧化硅粉末显现手印的效果.方法 应用亲油性纳米二氧化硅粉末与现场勘查箱内金粉、银粉和黑色磁性粉显现非渗透性客体表面油汗混合手印,并在自然光下观察比较显现效果.结果 亲油性纳米二氧化硅粉末显现出的手印图像纹线清晰连贯,背景反差好.结论 亲油性纳米二氧化硅粉末显现手印具有一定的优势.