Evaluation of Total Nitrite Pattern Visualization as an Improved Method for Gunshot Residue Detection and its Application to Casework Samples

Visualization of nitrite residues is essential in gunshot distance determination. Current protocols for the detection of nitrites include, among other tests, the Modified Griess Test (MGT). This method is limited as nitrite residues are unstable in the environment and limited to partially burned gunpowder. Previous research demonstrated the ability of alkaline hydrolysis to convert nitrates to nitrites, allowing visualization of unburned gunpowder particles using the MGT. This is referred to as Total Nitrite Pattern Visualization (TNV). TNV techniques were modified and a study conducted to streamline the procedure outlined in the literature to maximize the efficacy of the TNV in casework, while reducing the required time from 1 h to 5 min, and enhancing effectiveness on blood‐soiled samples. The TNV method was found to provide significant improvement in the ability to detect significant nitrite residues, without sacrificing efficiency, that would allow for the determination of the muzzle‐to‐target distance.     

Discordance of Gross and Histologic Findings in Estimating the Range of Fire of Gunshot Wounds

Forensic pathologist use soot and/or stippling surrounding entrance gunshot wounds in categorizing range of fire. If absent, some pathologists suggest utilizing histology when the range is diagnostically critical. This study investigates the concordance of macroscopic and microscopic findings in estimating range of fire by evaluating gunshot entrance and exit wounds made through human tissue analogs at defined distances using two handgun calibers. Examination of over 150 entrance wounds verified the ease of visually detecting soot from a muzzle distance of contact to 1 foot (30.5 cm), and its absence at 9 feet (274.3 cm). Distinctly apparent was bullet wipe surrounding the entrance wounds regardless of muzzle distance. Although variations existed, dark material was histologically identified in many skin, soft tissue, and bone sections at all ranges with both calibers. These nonparallel results decrease the dependability of histology for range of fire estimation and reinforce using gross observation.     

Physical forms of contemporary small-arms propellants and their forensic value

Intermediate gunshot wounds typically produce powder tattooing and/or stippling of the skin. The size and density of such powder-induced injuries around an entry wound are used to estimate the separation distance between the muzzle of the responsible firearm and the entry site through test firings at selected muzzle-to-target distances, with ammunition comparable to the injury-producing round and the evidence firearm. The foregoing is well known to forensic pathologists who document and describe such powder patterns in gunshot victims and firearm examiners who customarily produce the test-fired powder patterns for subsequent range-of-fire determinations. Less known, particularly to pathologists, is the considerable variety in forms of modern nitrocellulose propellants, their effects on powder-induced injuries to human skin, and the value of these varied physical forms in the reconstruction of shooting incidents. These factors are the subject of this article.     

Soft tissue radiography in determining contact and near-contact gunshot wounds.

Contact and near-contact gunshot wounds ordinarily show distinctive gunpowder patterns, muzzle imprints, or tearing of the skin. Microscopic and chemical examination have been used to estimate firing distances. A new method that utilizes soft tissue radiography is described. Nonjacketed lead bullets deposit a pattern of fragments and residues in tissue circumscribing contact and close gunshot wounds. Various patterns are presented to contrast the appearance of contact from distant gunshot wounds using various firearms and different types of bullets. This procedure may be used as an adjunct in the determination of contact and close gunshot wounds.     

Gunshot residue patterns on skin in angled contact and near contact gunshot wounds

The goal of this study was the reproduction of shape and pattern of gunshot residues in near contact and contact gunshot wounds by a series of experimental gunshots on a skin and soft tissue model. The aim was to investigate the shape and direction of soot deposits with regard to the muzzle according to different muzzle-target angles, firing distances, type of ammunition and weapon and barrel length. Based on a review of the literature and on the results of the experiments the authors could make the following statements of gunshot residues in angled contact and close contact gunshot: (1) gunshot residues on the target surface can be differentiated in a "inner" and "outer powder soot zone"; (2) the outer powder soot zone is much less visible than the inner powder soot zone and may lack on human skin; (3) with increasing muzzle target distance both inner and outer powder soot halo increase in size and decrease in density; (4) in angled shots the inner powder soot halo shows an eccentric, elliptic shape which points towards the muzzle, regardless of ammunition, calibre and barrel length; (5) the outer powder soot points away from the muzzle in angled contact and close contact shots.     

毛发枪弹损伤的环境扫描电镜研究

目的探讨毛发枪弹损伤微观形态与射击距离之间的关系。方法应用环境扫描电镜/能谱仪对64式手枪在0~200cm范围内射击造成的毛发损伤及附着物进行形态和成分分析。结果0~30cm射击,毛发表面粘附有大量密集分布的球形射击残留物颗粒,鳞片有严重斑纹状损伤和崩裂缺损;30~60cm射击,毛发表面粘附有较多散在分布的球形射击残留物颗粒,鳞片有轻微斑纹状损伤和崩裂缺损;100cm距离射击,毛发表面粘附有少数个别射击残留物颗粒,鳞片无斑纹状损伤;200cm距离射击,毛发表面无射击残留物。毛发枪弹射击断裂形态差异较大,大体分为剪切断裂和牵拉断裂两种类型,与射击距离无明显相关性。结论毛发表面粘附的大量球形射击残留物颗粒及其造成的鳞片斑纹状损伤对于法医学鉴定贴近距离射击((30cm)具有重要的实用价值。     

Study of unusual phenomenon of contact firing on gelatine block using .38 Special revolver--forensic importance

Gunshot wounds in suicide cases are self-inflicted wounds. Self-inflicted wounds in suicide cases are usually caused by contact firing and are of great forensic significance. Evaluation of contact wound may be associated with difficulties if the bore gets obstruction prior to firing. This paper investigates the phenomenon and interprets the results of test firing conducted on 20% gelatine block at 10 degrees C, using .38 Special revolver with obstruction of a bullet in the bore. Test firings were conducted in three different muzzle-target contact conditions keeping the muzzle pressed against the gel block in each case. The physical evidence and the wound ballistic parameter namely bullet track, remaining velocity of the bullets and volume of permanent cavity have been studied. When compared with the results of contact firing conducted with the same firearm without having any bore obstruction under similar conditions, it has been found that the physical evidence and the wound ballistic parameters would be helpful for interpretation of such unusual incidents for forensic inference.     

Suicide by Close-Range Gunshot Wound to the Bridge of the Nose

Suicidal gunshot wounds to the nasal bridge are rare, particularly at close range (defined as muzzle of the weapon not touching the skin surface, but near enough to deposit soot and stippling). Previously reported suicidal gunshot wounds to the nose have been through the left nostril (Forensic Sci Int 1995;71(1):25–31; J Forensic Radiol Imag 2013;1(2):63–7). The death of a 26-year-old man with a close-range gunshot wound to the bridge of the nose was deemed suicide due to history, scene, and autopsy findings. These findings included previous suicidal ideation, texted and written notes, the decedent's cross-legged position seated on the floor, the trajectory of the bullet through his head and into the ceiling fan and roof above him, and acute alcohol intoxication. This decedent may have been intending a hard contact forehead location but inadvertently fired the gun into the bridge of his nose while bending forward, prior to contact.     

An investigation into pellet dispersion ballistics.

Existing works on pellet dispersion ballistics are confined to some data-based models derived from statistical analysis of observed patterns on targets but the underlying process causing the dispersion lacks due attention. The present article delves into the relatively unexplored areas of dispersion phenomena, and attempts to develop a theoretical model for general application. The radial velocity distribution of pellets has been worked out by probing into the physical process of dispersion based on transfer of momentum from undispersed shot mass to dispersed pellets. The ratio 2u/v0 (u = root mean square (r.m.s.) radial velocity and v0 = muzzle velocity of the pellets) is found to be fairly constant for a fixed gun-ammunition combination and has been suitably designated as 'Dispersion Index' (DI) characterising its dispersion capability. The present model adequately accounts for pellet distribution on targets and it appears that 'Effective Shot Dispersion' (ESD) as introduced by Mattoo and Nabar [ESD = [(4/N0)sigma Ri2]1/2, where N(0) is the total number of pellets and Ri is the radial distance of the i-th pellet from centre of pattern], gives a faithful numerical measure of overall dispersion at a given distance. A relationship between ESD and firing distance, incorporating the effects of air resistance and gravity has been worked out, which reveals that DI controls the dispersion at a given distance. For small distances (less than 20 m) the relation reduces to a linear one, as already observed empirically and looks like ESD = E0+DI x firing distance, E0 being a parameter dependent on gun and ammunition. The present model, unlike earlier ones, is versatile enough to explain the natures of the dependence of dispersion on firing distance as well as on gun-ammunition parameters, which are essential for a faithful reconstruction of a crime scene. The model has been tested with such experimental data as are available and reasonable agreement is observed.     

Direction, site and the muzzle target distance of bullet in the head and neck at close range as an indication of suicide or homicide

Direction, site and muzzle target distance can indicate suicide or homicide. This conclusion can be drawn from autopsies of 57 cases of suicide and 68 cases of homicide by handgun fired at close range to the head and neck together with going to the crimescene in some cases. This study was carried out in Bangkok during the period from January 1983 to January 1986. In order to determine whether it was suicide or homicide, the path of the bullet, the site, the muzzle target distance must be considered. The angle of the bullet would be either elevated (from below upward), horizontal or an angle of depression (from above downward). For suicide, the direction of the bullet should be at an angle of elevation in the majority of cases. The position of the handgun in relation to the head in suicide was most often in tight contact and near contact. For homicide, the direction of the bullet should be horizontal in most cases. The bullet was at close range in the majority of the cases. There are 8 common sites for suicide and homicide and 10 different sites in the case of homicide which are at neck, left cheek, left aural region, lip, left occipital area orbit, chin, left eyebrow, submental and nose.     

Dynamic pressure measurement of cartridge operated vole captive bolt devices

IntroductionVole captive bolt devices are powder actuated spring guns that are used as a pest control mean. After having triggered the explosion of the blank cartridge by touching a metal ring around the muzzle, the vole is killed by the massive propulsion of the gas jet. Improper use and recklessness while handling these devices may cause severe injuries with the hand of the operator at particular risk. Currently, there are no experimental investigations on the ballistic background of these devices.MethodsAn experimental test set-up was designed for measurement of the firing pressure and the dynamic force of the gas jet of a vole captive bolt device. Therefore, a vole captive bolt device was prepared with a pressure take-off channel and a piezoelectric transducer for measurement of the firing pressure. For measurement of the dynamic impact force of the gas jet an annular quartz force sensor was installed on a test bench. Each three simultaneous measurements of the cartridges’ firing pressure and the dynamic force of the blast wave were taken at various distances between muzzle and load washer.ResultsThe maximum gas pressure in the explosion chamber was up to 1100 bar. The shot development over time showed a typical gas pressure curve. Flow velocity of the gas jet was up to 2000 m/s. The maximum impact force of the gas jet at the target showed a strong inverse ratio to the muzzle's distance and was up to 11,500 N for the contact shot distance. Energy density of the gas jet for the close contact shot was far beyond the energy density required for skin penetration.ConclusionThe unique design features (short tube between cartridge mouth and muzzle and narrow diameter of the muzzle) of these gadgets are responsible for the high firing pressure, velocity and force of the gas jet. These findings explain the trauma mechanics of the extensive tissue damage observed in accidental shots of these devices.     

Visualization of gunshot residue patterns on dark clothing

ABSTRACT: Determination of the muzzle‐to‐target distance is often a critical factor in criminal and civil investigations involving firearms. However, seeing and recording gunshot residue patterns can be difficult if the victim's clothing is dark and/or bloodstained. Trostle reported the use of infrared film for the detection of burn patterns. However, only after the film is developed are the results visible and multiple exposures at different settings may be needed. The Video Spectral Comparator^? 2000 (Foster & Freeman Ltd., Evesham, Worcestershire, U.K.) is an imaging instrument routinely used by forensic document examiners. Without use of specialized film could the VSC 2000 (at appropriate instrument settings) quickly, easily, and reliably provide instantaneous viewing, saving, and printing of gunshot residue patterns on dark and/or blood soaked clothing? At muzzle‐to‐target distances of 6, 12, and 18 in., test fires were made into five different types of dark clothing using eight different handguns of different calibers. Gunshot residues were detected for all eight calibers, and powder burn patterns were seen on dark clothing for all three target distances and calibers except 0.22 long rifle and 0.25 ACP. Bloodstains did not preclude the viewing of these patterns.     

Noise Trauma Induced by a Mousetrap—Sound Pressure Level Measurement of Vole Captive Bolt Devices

Abstract: While ballistic parameters of vole captive bolt devices have been reported, there is no investigation on their hazardous potential to cause noise trauma. The aim of this experimental study was to measure the sound pressure levels of vole captive bolt devices. Two different shooting devices were examined with a modular precision sound level meter on an outdoor firing range. Measurements were taken in a semi‐circular configuration with measuring points 0° in front of the muzzle, 90° at right angle of the muzzle, and 180° behind the shooting device. Distances between muzzle and microphone were 0.5, 1, 2, 10, and 20 m. Sound pressure levels exceeded 130 dB(C) at any measuring point within the 20‐m area. Highest measurements (more than 172 dB[C]) were taken in the 0° direction at the 0.5‐m distance for both shooting devices proving the hazardous potential of these gadgets to cause noise trauma.     

Improved method for shooting distance determination. Part 2--bullet holes in objects that cannot be processed in the laboratory

An improved method for firing distance determination on exhibits that cannot be processed in the laboratory such as cars, doors, windows, or furniture is described. The novel part of the method includes transfer of total nitrite (nitrite ions and smokeless powder residues) from the target to an adhesive lifter. After the transfer, vaporous lead and copper deposits around the bullet entrance hole are visualized on the target by sodium rhodizonate and rubeanic acid, respectively. The Modified Griess Test is carried out after alkaline hydrolysis of the smokeless powder residues on the adhesive lifter.     

Persistence of Biological Traces at Inside Parts of a Firearm from a Case of Multiple Familial Homicide

Backspatter from wounds caused by contact shots against a biological target had before been shown to be propelled into firearms' barrels where they can persist and be retrieved from as relevant forensic evidence. Herein, that insight was applied to the investigation of a case of multiple familial homicide with a firearm. Samples of backspatter were collected from the firearm using DNA‐free swabs. DNA was extracted from the swabs, and 16 STR systems were PCR‐amplified to generate DNA profiles of all victims shot by the firearm. The quality of the resulting DNA profiles was sufficient to exclude the perpetrator as donor and to differentiate the three closely related victims thereby proving that all three victims had been shot by the same firearm from very close or contact distance. A key insight gained from this case was that not only a firearms' barrel inside but other inner surfaces may be charged with profilable DNA.     

Pseudo-gunpowder stippling caused by fragmentation of a plated bullet

In this report we present a case of pseudo-gunpowder stippling caused by fragmentation of a plated bullet. Investigation of the incident revealed absence of an interposed target, no evidence of ricochet, and a normally functioning, undamaged weapon. Electroplated ("plated" or "coated") bullets are relatively uncommon. They look similar to jacketed bullets in that the lead core is covered by a copper-colored jacketlike material. However, the copper-colored plating material is thinner than the typical jacket material. In certain instances, the plating may strip away from the lead core during transit through the barrel of the weapon and can produce injuries that mimic gunpowder stippling. Forensic pathologists are advised to be aware of this phenomenon. Misinterpretation of such wounds could result in improper classification of range of fire or improper conclusions about the presence or absence of an interposed target or ricochet.     

Patterned imprint mark due to the folded shoulder stock: A possible finding in contact shots from submachine guns

The muzzle imprint (barrel mark) is a pressure abrasion typically associated with contact shots. Apart from the contours of the actual muzzle profile, other constructional parts such as the front sight and/or the recoil spring guide of semiautomatic pistols may be imprinted next to the bullet entrance wound. In some types of submachine guns the shoulder stock can be folded forward so that its end partly encircles the muzzle. If such a weapon was in contact with the skin at the instant of discharge, a corresponding contusion mark is to be expected. The imprint configuration may point to the type of weapon and to the way in which the gun had been held when firing the shot. The paper presents the injury pattern in a 36-year-old man who committed suicide with a Scorpion SA Vz 61 submachine gun cal. 7.65 mm Browning from former Czechoslovakia.     

Skeletal Indicators of Shark Feeding on Human Remains: Evidence from Florida Forensic Anthropology Cases

This research examines a series of six Florida forensic anthropology cases that exhibit taphonomic evidence of marine deposition and shark‐feeding activities. In each case, we analyzed patterns of trauma/damage on the skeletal remains (e.g., sharp‐force bone gouges and punctures) and possible mechanisms by which they were inflicted during shark predation/scavenging. In some cases, shark teeth were embedded in the remains; in the absence of this evidence, we measured interdental distance from defects in the bone to estimate shark body length, as well as to draw inferences about the potential species responsible. We discuss similarities and differences among the cases and make comparisons to literature documenting diagnostic shark‐inflicted damage to human remains from nearby regions. We find that the majority of cases potentially involve bull or tiger sharks scavenging the remains of previously deceased, adult male individuals. This scavenging results in a distinctive taphonomic signature including incised gouges in cortical bone.     

Wounds caused by contact with muzzle-lift relief ports (Mag-Na-Port).

Fan-shaped stippled burns were produced on the skin when a revolver whose barrel had been modified by the Mag-Na-Port process was fired twice with the side of the muzzle in contact. A grazing wound was produced by one bullet, and an oblique entry was produced by the other. The characteristics of Mag-Na-Port wounds and test shots are described, and these are compared with test shots from two other higher power revolvers.     

Formation of epidermal damage at entry by gunshot with a contact weapon

Examination of contact bullet wounds shows the patterned inprint of the muzzle on the skin ("stanzmark") and further ragged structures around the periphery to be the remainders of the abraded epithelium. Usually these are turned outwards and from arch-shaped intraepithelial recesses, which contain residual amounts of propellant. The damage and soiling around the point of entry are the result of two factors in combination: the combustion gases and the gases escaping between the skin surface and the front of the barrel. This leads to different amounts of skin abrasion dependent on the amount and pressure of the gases. In this way, the frequently seen difference in size and shape of the stanzmark and the muzzle front can be explained.