Modifications to the silver physical developer

The silver physical developer is currently the most successful reagent used for visualizing the water-insoluble components (e.g., lipids) of latent prints on porous surfaces. It is normally used after the amino acid visualizing reagents (e.g., ninhydrin and DFO) are used. This work found that the performance of the current formulation of silver physical developer is strongly reduced when the water used is changed from the usual distilled water to the more purified reverse osmosis/deionized (RO/DI) water. Based on numerous experiments involving the systematic variation of the component concentrations, the performance was restored and even improved by reducing the concentration of all the components (except that of the ferric salt) and by including malic acid in the formulation. These modifications resulted in a new silver physical developer formulation that performs as well as or better than the current formulation and is less expensive to make.     

Visualising the past – An evaluation of processes and sequences for fingermark recovery from old documents

This study aimed to collect data on the effectiveness of most of the fingermark visualisation reagents currently used on porous surfaces on fingermarks aged for up to 90?years, significantly extending the timescales for which such information exists. A limited subset of the variables associated with processing of old fingermarks was explored, with a focus on the use of 1,8 diazafluoren-9-one (DFO), 1,2-indandione, ninhydrin, and physical developer. These techniques were used in sequence on batches of cheques between 11 and 32?years old, and on documents dating from the 1920s and 1940s. The potential for applying a physical developer enhancement process (blue toning) as the final step in the sequence was also explored. The benefits of using processing sequences on porous items were clearly demonstrated, with all processes in the sequence adding value in terms of additional marks found on the cheques up to 32?years old. In addition, physical developer was found to be capable of developing fingermarks up to 90?years old, whereas the amino acid reagents appear less effective on documents of 70?years and older. An experimental physical developer formulation with reduced environmental impact was found to be as effective as the existing process in these experiments. Blue toning was found to visualise an additional 10–25% of marks, and its wider use after silver-based deposition processes is recommended based on the evidence from this study.     

A comparison of multi-metal deposition processes utilising gold nanoparticles and an evaluation of their application to 'low yield' surfaces for finger mark development

This paper reports a comparison of the effectiveness and practicality of using different multi-metal deposition processes for finger mark development. The work investigates whether modifications can be made to improve the performance of the existing process published by Schnetz. Secondly, we compare the ability of different multi-metal deposition processes to develop finger marks on a range of surfaces with that of other currently used development processes. All published multi-metal deposition processes utilise an initial stage of colloidal gold deposition followed by enhancement of the marks with using a physical developer. All possible combinations of colloidal gold and physical developer stages were tested. The method proposed by Schnetz was shown to be the most effective process, however a modification which reduced the pH of the enhancement solution was revealed to provide the best combination of effectiveness and practicality. In trials comparing the modified formulation with vacuum metal deposition, superglue and powder suspensions on surfaces which typically give low finger mark yields (cling film, plasticised vinyl, leather and masking tape), the modified method produced significantly better results over existing processes for cling film and plasticised vinyl. The modified formulation was found to be ineffective on both masking tape and leather. It is recommended that further tests be carried out on the modified multi-metal deposition formulation to establish whether it could be introduced for operational work on cling film material in particular.     

Use of gold nanoparticles as molecular intermediates for the detection of fingermarks

Among the numerous methods dedicated to the detection of latent fingermarks, the MultiMetal Deposition (MMD) offers, as a main advantage, the ability to be applied on a great number of porous and non-porous surfaces, e.g., paper, plastic, glass, latex, and polystyrene, even if wetted. While considered as a powerful and sensitive technique, MMD is often neglected, mainly because of operational limitations (siliconized vessels, restrictive pH domain, numerous immersion baths, ...). In this contribution, we propose a modification of the standard MMD method so that the procedure is simplified with a number of baths reduced to a minimum. To reach this goal, it was necessary to obtain a fully operable solution which could detect fingermarks in a single step. We chose to take advantage of the molecular recognition mechanisms by functionalizing the gold nanoparticles with a molecular host able to bind itself to gold while keeping the ability to trap molecules in solution. Cyclodextrins were chosen as they can be easily chemically modified to offer gold-binding abilities. Moreover, they are widely used as hosts for various molecular guests (dyes, luminescent molecules, ...). This new formulation has been tested on three different surfaces to attest the feasibility of this strategy. Successful results were obtained with detailed fingermarks offering a good contrast to allow their identification without the need to enhance the results (such as with a physical developer). If the new formulation behaves very similarly to the old one, in terms of experimental conditions, it offers the additional advantage to develop fingermarks after immersing them in only one bath. The goal is thus reached.     

An assessment of the effectiveness of 5-methylthioninhydrin within dual action reagents for latent fingerprint development on paper substrates

A critical investigation of 5-methylthioninhydrin (5MTN) is presented as a 'dual action' formulation component for the development of latent finger marks on paper substrates. Preparation of a dual action reagent was performed by combining proportions of 5MTN and zinc chloride (ZnCl(2)) in a pre-mixed solution. Developed prints (deposited on filter paper substrates) could be subsequently visualised in both colour and fluorescence modes. Finger mark quality was graded using a quartered print approach for a number of reagent compositions to deliver an optimised formulation recipe. To fully appraise 5MTN in comparison to currently employed chemistries, this reagent was evaluated against three alternative amino acid selective reagents, ninhydrin, 1,8-diazafluorenone (DFO) and 1,2-indandione/ZnCl(2). Six common paper types were used for this purpose and split depletion finger marks from six donors were collected. Finger mark sets were also left for two days or two weeks to show the effect of ageing on development quality. For the first time, it was shown that 5MTN/ZnCl(2) is effective as a 'dual action' reagent under the United Kingdom climate conditions. However, results presented herein show that the existing recommended chemistries and the 1,2 indandione/ZnCl(2) process are all more effective than this new latent finger mark enhancement reagent. In a preliminary sequencing study, we show the effectiveness of the existing DFO-ninhydrin sequence over dual action reagents.     

Immunolabeling and the compatibility with a variety of fingermark development techniques

Much information can be obtained from the chemical composition of a fingermark, which can be helpful in crime scene investigation. Immunolabeling can be used to extract information about the donor of the fingermark and it can also act as a fingermark development tool in sequence with the standard fingermark development techniques. However, before immunolabeling can be used in forensic practice more information on the possibilities and limitations of this technique is required. In this study, our aim was to investigate if immunolabeling is compatible with standard development protocols (indanedione-zinc, indanedione-zinc followed by ninhydrin spraying, physical developer, cyanoacrylate fuming, cyanoacrylate followed by basic yellow staining, lumicyanoacrylate fuming and polycyanoacrylate fuming). Immunolabeling was carried out successfully on all developed fingermarks, whereby dermcidin was selected as antigen of interest. We can conclude that immunolabeling is compatible with a wide variety of different fingermark developers. This finding in combination with previous findings, makes immunolabeling an interesting technique, which can be of great value in the forensic field.     

Luminescent visualization of latent fingerprints by direct reaction with a lanthanide shift reagent.

The utilization of the lanthanide shift reagent tris (6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionato) europium (III) [Eu(fod)3] as a simple one-step reagent for the luminescent visualization of latent fingerprints has been investigated. UV excitation of Eu(fod)3-treated prints, achieved by using a hand-held UV lamp or a Polilight, results in an orange emission at 614 nm. Time-resolved imaging is not required for visualization. Visualization of latent fingerprints on paper under the conditions used, although good, was found to be inferior to that obtained by standard DFO (1,8-diazafluoren-9-one) treatment, whereas visualization of prints obtained on aluminum drink cans and galvanized iron proved superior to that obtained by Superglue/panacryl treatment. Eu(fod)3 treatment can also be used first without compromising subsequent ninhydrin or DFO treatment, making it a 'nothing-to-lose" reagent.     

Examination of the steps leading up to the physical developer process for developing fingerprints

This is a systematic study that examines several acid prewashes and water rinses on paper bearing latent prints before its treatment with a silver physical developer. Specimens or items processed with this method are usually pretreated with an acid wash to neutralize calcium carbonate from the paper before the treatment with a physical developer. Two different acids at varying concentrations were tested on fingerprints. Many different types of paper were examined in order to determine which acid prewash was the most beneficial. Various wash times as well as the addition of a water rinse step before the development were also examined. A pH study was included that monitored the acidity of the solution during the wash step. Scanning electron microscopy was used to verify surface calcium levels for the paper samples throughout the experiment. Malic acid at a concentration of 2.5% proved to be an ideal acid for most papers, providing good fingerprint development with minimal background development. Water rinses were deemed unnecessary before physical development.     

溶剂蒸溶法对书写时间判定的初步尝试

本文针对圆珠笔字迹相对书写时间的鉴定,参照溶剂提取法,提出一种新的实验技术——溶剂蒸溶法.该方法以检样纸张作为展开板,以乙醇蒸气作为展开剂,通过测定圆珠笔油墨在纸张上的扩散程度来判定圆珠笔字迹的相对书写时间.     

物理显影液显现渗透客体表面血潜手印方法研究

目的　建立了一种物理显影液显现潮湿或者浸泡渗透客体表面血潜手印的新方法。方法　把检材浸泡在配制好的物理显影液中 ,还原的银粒子吸附在血潜手印部位显现出手印纹线。结果　显现出手印纹线为黑灰色 ,纹线连贯 ,反差明显。结论　物理显影液能够有效地显现出潮湿或者浸泡后手渗透客体表面血潜手印。     

Optimization and initial evaluation of 1,2-indandione as a reagent for fingerprint detection

1,2-Indandione has been used to develop fluorescent fingerprints on porous materials such as paper. The compound reacts with amino acid residues to produce highly fluorescent fingerprint ridges. An optimized formulation and treatment protocol for using the reagent is presented here. The reagent is applied as a solution in HFE7100 containing acetic acid and ethyl acetate. Treated articles are heated at 100 degrees C for 10 min at ambient humidity and stored in the dark before recording the fingerprints using fluorescence photography or digital imaging. Photodecomposition of the fluorescent fingerprints has been observed. Storage in the dark reduces degradation, extending the lifetime of the fingerprints. Other chemical methods to stabilize the fingerprints proved unsuccessful. Comparisons of the performance of 1,2-indandione with DFO in CFC113 performed on a limited range of substrates indicated that the reagent might be an effective method for the development of latent fingerprints despite the new reagent producing less intense fluorescence.     

Quantitative evaluation of europium in blue ballpoint pen inks/offset printing inks tagged with europium thenoyltrifluoroacetonate by spectrofluorometry and ICP-AES

Tagging of writing/printing inks with suitable inorganic taggants such as rare-earth chelates has the potential to help document examiners identify fraud in sensitive written/printed documents. Selection of rare-earth chelates as taggants primarily depends on the satisfactory sensitivity of analytical determination and the absence of the taggants in normal varieties of inks used for document writing/printing. Spectrofluorometric determination of trace amounts of europium in blue ballpoint pen inks and offset printing inks tagged with europium thenoyltrifluoroacetonate was carried out with sodium tungstate solution. Sodium tungstate acts as a specific reagent that enhances the fluorescence intensity of the Eu3+ ion. The excitation and emission wavelengths are 270 nm and 605 nm respectively. The results were compared with the data obtained with ICP-AES. Satisfactory recoveries were observed with precision better than 5% RSD and comparable accuracy. Under the optimized experimental conditions, detection limits and quantitation limits were determined. The detection limits obtained by spectrofluorometry and ICP-AES were 0.01 microg/mL and 0.006 microg/mL respectively whereas the limits of quantitation were about 0.03 microg/mL and 0.018 microg/mL respectively. The spectrofluorometric method is rapid, selective, sensitive and accurate for the determination of europium in blue ballpoint pen ink and offset printing inks and may be suitable for application in the examination of sensitive documents to aid in document related crime investigation. The advantages and limitations of the tagging approach and proposed analytical techniques are discussed.     

Evaluation of iodine-benzoflavone and ruthenium tetroxide spray reagents for the detection of latent fingermarks at the crime scene

The performance of two spray reagents, iodine-benzoflavone and ruthenium tetroxide (RTX), was evaluated and compared with the conventional technique currently used at the crime scene, that is, powdering. Neither the spray techniques nor powdering were shown to be suitable for all surfaces and ages of marks tested. On some surfaces such as glass and treated wood, powdering was still the superior technique, whereas the spray techniques produced better development on wallpaper, vinyl, and brick. Sequencing work showed that RTX was incompatible with powdering and cyanoacrylate (with a rhodamine 6G stain). Iodine-benzoflavone can be used successfully either before or after powdering in a sequence; however, it was incompatible with cyanoacrylate. Two non-CFC formulations of iodine-benzoflavone using HFC4310mee and HFE7100 solvents were tested and shown not to be as effective as the original Arklone (CFC-113) formulation; however, the HFC4310mee solvent is recommended as the most suitable replacement solvent. Due to the expense of the commercial RTX spray, attempts at formulating a more cost-effective version were also carried out. A formulation was developed that gave comparable development to the commercial version but at a much cheaper cost, and with a shelf life of up to two months. Recommendations are presented for which techniques are suitable for different surfaces and ages of marks. Powdering was shown to be the best technique on all ages of marks tested on treated wood, glass, and also on marks aged three days and older on paint. Iodine-benzoflavone was the best technique on wallpaper, vinyl, brick, and raw wood. RTX was the best detection technique for fresh marks and marks aged up to one day on wallpaper and paint.     

The effects of latent print processing on questioned documents produced by office machine systems utilizing inkjet technology and toner

Counterfeiting of currency and identity documents, death threats, illegitimate business transactions, and terrorist-related activities are some examples of the types of crimes that often involve documents produced from printers and copiers. Although standard protocol typically requires a questioned document (QD) examination prior to latent print (LP) processing, occasionally, items of evidence may be submitted for a QD examination following the application of a series chemicals utilized in the development of latent fingerprints. In such cases, the forensic examiner must take into account any previous treatments prior to initiating an examination on documents produced with a printer or copier. This study was devised to examine the effects of a latent print development technique [ninhydrin, physical developer, and a bleach enhancer] on the physical and chemical examination of documents produced from copiers and printers.     

Optimisation and evaluation of 1,2-indanedione for use as a fingermark reagent and its application to real samples

1,2-indanedione is an emerging fingermark reagent used on porous surfaces. The general consensus is that this reagent is at least as sensitive as DFO, with some research showing higher sensitivity for 1,2-indanedione as opposed to DFO. However, a number of discrepancies existed in the literature as to which formulation and which development procedure produces optimal results. This project set out to investigate the best formulation and development procedure under Australian conditions, encompassing all published recommendations as well as some novel approaches. 1,2-indanedione formulations were compared with respect to initial colour, fluorescence, concentration of reagent, acetic acid concentration, and the effect of different carrier solvents. Numerous development conditions were investigated, including a conventional oven, a heat press and humidity. Further enhancement using metal salt treatment and liquid nitrogen was also evaluated. The heat press set at 165 degrees C for 10s proved to give the best initial colour and most intense luminescence. Secondary metal salt treatment improved initial colour and luminescence. The Polilight, the VSC 2000, and the Condor Chemical Imaging macroscope have been used to detect the fingerprints developed with 1,2-indanedione on a variety of high- and low-quality porous and semi-porous surfaces, with impressive results overall. Laboratory and field tests were conducted to compare 1,2-indanedione with DFO and ninhydrin as well as to investigate the position of 1,2-indanedione in the sequence of reagents for fingermark detection on porous surfaces. Overall, 1,2-indanedione proved to be a viable alternative to traditional methods for the detection of fingermarks on porous surfaces, with more fingermarks being developed using this reagent on real samples than both DFO and ninhydrin and a combination of the two reagents.     

Investigations into factors affecting the cascade developer used in ESDA--a review

The Electrostatic Detection Apparatus (ESDA) is a technique most commonly used for the visualisation of indented impressions on questioned documents. This work investigates some of the variables which are known to affect the results of ESDA and some variables which have, as yet, not been addressed. The investigation of variables included: examining the effects of different levels of indentation on different qualities of paper, chronological aging of cascade developer and the effects of repeated use of cascade developer on both the quality of results and the glass beads themselves, the effects of storage of cascade developer in a humidified environment and finally the effects of variation on the image development time. Results indicate that chronological aging of cascade developer does not have a negative effect on the quality of results and a 200 g portion of cascade developer will give good quality results for up to 30 traces before the quality will begin to deteriorate. Humidification of the cascade developer appears to have no advantages over storage in a normal environment and, in fact, the toner is lost sooner with humidification. The surface of the glass beads are affected through repeated use of cascade developer and appear to become visually smoother which may lead to a loss of attraction between them and the toner particles.     

The effect of chlorine and hydrogen chloride on latent fingermark evidence

Exposure of forensic evidence to either hydrogen chloride or chlorine can result in acidification to such an extent that enhancement of fingermarks with ninhydrin or cyanoacrylate is inhibited. Under these circumstances, pretreatment of samples with volatile bases such as triethylamine or ethanolamine prior to using these enhancement techniques can lead to successful visualization of fingermarks. Alternatively, physical enhancement techniques such as powder dusting or small particle reagent can be used on acidified non-porous substrates, although the former technique is subject to increased background under such conditions.     

Luminous lip-prints as criminal evidence

Luminescence is specially a useful property for the search of invisible evidences at the scene of a crime. In the latent fingerprints particular case, there are at one's disposal fluorescent reagents for their localization. The study of latent lip prints (that is lip prints from protective lipstick, or permanent or long-lasting lipstick that do not leave any visible marks) is more recent than fingerprints study. Because of the different composition of both types of prints, different reagents have been tried out on their developing. Although, lysochromes are particularly useful reagents to obtain latent lip prints, it may occur on coloured or multicoloured surfaces, the developing is not perceived due to contrast problems between the reagent and the surface where the print is searched. Again, luminescence offers the possibility to solve this problem. Nile Red is being studied as a potential developer for latent lip prints. The results on very old prints (over 1year) indicate that this reagent is highly efficient to get latent lip prints.     

Genipin, a novel fingerprint reagent with colorimetric and fluorogenic activity, part II: optimization, scope and limitations

Genipin, a hydrolytic product of geniposide extracted from gardenia fruit, was thoroughly studied as a potential fingerprint reagent, and optimal conditions for fingerprint development have been determined. Latent fingerprints on paper items that have been treated with a non-ink running formulation containing 0.17% of the reagent, showed up as both colored and fluorescent images. On brown wrapping paper and on papers with highly luminescent backgrounds, genipin developed more visible and clearer prints than did classical reagents such as ninhydrin or DFO. Another potential advantage of genipin is that it is totally harmless and an environmentally friendly reagent.     

Evaluation of the solvent black 3 fingermark enhancement reagent: Part 2 — Investigation of the optimum formulation and application parameters

A comparison is reported of the relative effectiveness to two formulations of the solvent black 3 (Sudan Black) reagent used to enhance grease contaminated fingermarks. These experiments compared the currently recommended ethanol-based formulation with a lower flammability system based on 1-methoxy-2-propanol (PGME) using natural, deliberately sebaceous and grease contaminated marks across a range of surfaces. It is shown that overall the PGME-based formulation was significantly better at producing good ridge detail on most surfaces for both natural and deliberately sebaceous prints, and for contaminated prints the ridge detail obtained with the PGME-based formulation was as good or better than that obtained with the ethanol formulation.Several smaller experiments were also carried out in order to provide additional information on the solvent black 3 process. These showed that solutions of age up to 2 years can still develop good ridge detail, but the colour of the stained mark may vary. It was also demonstrated that the currently recommended 2 minute treatment time often resulted in very heavy background staining and in practice significantly reduced treatment times can be recommended according to the nature of the surface present.