京尼平序列显现手印方法研究

目的考察京尼平溶液显现手印的灵敏度,并探索DFO→京尼平→茚三酮方法联用显现纸张上潜在手印的效果。方法通过使用京尼平溶液对同一手印样本进行一次、两次和三次浸泡处理,考察浸泡次数是否会影响显现效果;通过对京尼平→茚三酮、茚三酮→京尼平,京尼平→DFO和DFO→京尼平方法的组合设计方案与每种方法的单独使用进行比较研究,考察序列显现方法对显出手印的影响。结果单用京尼平溶液对同一样本进行多次浸泡在自然光和荧光模式下都不会明显增强手印的显现效果,DFO方法先于京尼平、京尼平先于茚三酮使用都能起到增强手印纹线的效果。结论京尼平方法显现手印灵敏度较高,DFO→京尼平→茚三酮方法联用可以进一步提高手印的显出率。     

京尼平显现渗透性客体上潜在手印方法研究

目的介绍一种能够用来显现潜在手印的新型物质—京尼平。方法依据京尼平能和手印遗留物质中的氨基酸或蛋白质发生反应,生成一种有荧光效应的多聚体深蓝色物质,通过自然光或多波段光源下显现观察,并将其与传统的茚三酮、DFO显现进行比较。结果京尼平显现法的显现条件与茚三酮类似,其处理后的潜在手印既在自然光下可见又在多波段光源的激发下有荧光现象。结论京尼平显现法可用于渗透性客体上潜在手印的显现。     

硝酸银、茚三酮、DFO法显现纸张上指印的效果比较

目的为有效的提高纸张上汗潜手印的显现率。方法根据汗潜手印的显现原理,针对不同的纸张,分别运用硝酸银、茚三酮与DFO（1,8-二氮芴-9-酮）3种显现方法进行了实验,并对实验结果进行了分析比较。重点分析了这3种方法在显现不同纸张、不同遗留时间、不同汗液量的汗潜手印时的效果及其适用范围。结果为改善渗透性客体上的汗潜手印显现效果,提供科学的依据。     

浅色调湿粉显现手印方法的研究

目的探索新的手印显现方法,祛除传统手印显现方法对使用者的健康危害;方法用浅色调湿粉采用不同操作对不同客体表面手印、不同物质手印及不同遗留时间手印进行显现,通过显现效果的比较,得出湿粉显现手印的适用范围、最佳操作方法及其显现效果;结果显出的手印清晰、流畅,与背景反差强;结论该方法适用于光滑非渗透性客体表面及潮湿或粘性表面的汗潜、油潜、蛋白手印的显现,使用方便有效。     

三种β-取代茚三酮的合成及显现汗潜手印的研究

本文基于傅克酰基化取代反应合成了三种茚三酮类似物：β-甲氧基茚三酮、β-硝基茚三酮、β-甲基茚三酮,比较并研究相同配方下三种β-取代茚三酮在不同纸张上显现汗潜手印的效果,并分别与茚三酮进行比较,分析其优劣。结果显示,三种β-取代茚三酮的显现液基本可显示不同纸张上的新鲜指纹,但β-硝基茚三酮对于陈旧指纹的显现效果较差,且显现液本身为棕褐色,显示出的指纹纹线为黑褐色,故视觉感官上稍劣于其他两者;β-甲氧基茚三酮和β-甲基茚三酮的效果均与茚三酮相当,灵敏度略高于茚三酮,显色后的稳定性高于茚三酮。研究表明,β-位取代基的变化能够改变茚三酮类化合物显现手印的效果,给电子基团的修饰能够提高该类化合物的手印显现性能,化合物本身的荧光性能与实际的指纹显现效果并不直接相关。     

一种改进的碘熏法-碘锌手印显现法

目的为解决传统碘熏法显出手印容易褪色、固定困难等问题。方法提出了一种改进的碘熏法-碘锌手印显现法，实验了不同反应物配比、不同客体材质对显现效果的影响；与常规碘熏法进行了对比实验；并考察了碘锌法显出手印的稳定性。结果碘锌手印显现法可以用于常见渗透性及非渗透性客体上新鲜汗潜手印的显现。该方法不必外加热源，携带、存储和应用更加便利；该方法显出的指纹纹线保存时间与传统碘熏法相比明显延长。结论碘锌手印显现法是一种高效、实用的手印显现方法。     

纸张、本色木上茚三酮显现的手印固定、增加反差的新方法

茚三酮显现汗液手印,其原理是茚三酮与人体汗液中的各种氨基酸进行化学反应,形成紫色化合物——拉赫曼紫,从而使无色的汗潜手印呈蓝紫色。我们在工作中发现由于承受客体质地、颜色、表面光洁度不同,显出的蓝紫色手印有时反差较弱,如果放置时间过长,手印会自行消褪,给日后检验鉴定带来一定困难,为此笔者试用普通白纸、牛皮纸、本色木做实验样本,显出手印后用静电复印的方法进行固定,增加反差,取得了较好的效果。 实验操作     

荧光黄湿粉显现手印方法的初步研究

目的研发一种具有荧光特性的黄湿粉,以提取遗留在不同客体上的不同种类的手印。方法在100mL温水中加入适量的表面活性剂,溶解后加入100g荧光黄颜料,选用不同种类客体及不同种类物质手印进行显现实验,比较显现效果;结果遗留在光滑非渗透性客体及半渗透性客体表面的汗潜、油潜手印,显出的手印纹线流畅、反差强、荧光强;结论荧光黄湿粉可适用于光滑非渗透性客体及半渗透性客体表面新鲜或较新鲜汗潜手印、油潜手印及血潜手印的显现。     

碘热升华喷枪显现潜手印的应用研究

本文提出一种以石英灯为加热器的碘热升华喷枪显现潜手印的新方法。实验表明,该技术方法操作简便,适用范围广,手印显出率高,尤其是显现遗留在墙面、本色铝合金表面、UPVC表面的潜手印效果明显。     

纳米二氧化钛荧光粉末显现潜在手印研究

目的使用荧光染料包覆纳米二氧化钛颗粒,制备具有荧光效果的纳米二氧化钛粉末材料,并探索应用纳米二氧化钛荧光粉末显现潜在手印的方法。方法使用实验室合成的二酰亚胺染料与纳米二氧化钛微粒按照一定质量比混合制备形成荧光粉末,通过扫描电子显微镜对其进行表征,观察颗粒结构特征。在玻璃、瓷砖、透明塑料片、彩色塑料包装、易拉罐5类非渗透性客体上捺印手印,观察纳米二氧化钛荧光粉末对不同非渗透性客体上新鲜潜手印的显现效果。分别在5种客体上制作遗留时间为1、4、7、15d的手印样本,考察遗留时间对纳米二氧化钛荧光粉末显现自然陈旧手印效果的影响。将新鲜手印置于标准大气压100℃条件下分别加热1~72h,使用纳米二氧化钛荧光粉末显现,考察其对高温老化手印的显现效果。结果纳米二氧化钛荧光粉末为粒径100~200nm的圆形颗粒;在蓝绿光激发下可发出较强的荧光,能显现多种非渗透性客体上的新鲜手印,与背景反差明显并且能显著降低复杂背景对手印纹线的影响;显出新鲜手印中80%以上具有鉴定条件。纳米二氧化钛荧光粉末对遗留15d以内的陈旧手印仍具有较好的显现效果。100℃高温环境对手印显现效果没有明显影响。结论纳米二氧化钛荧光粉末经济、环保,显现操作简单,易于推广。     

Advanced solvent-free application of ninhydrin for detection of latent fingerprints on thermal paper and other surfaces

This work presents the first known experiments of ninhydrin sublimation in vacuum to detect latent fingerprints on thermal paper. In this method, latent fingerprints become visible in rich detail without the background black staining known from the application of ninhydrin solutions to thermal paper. The method involves hanging the thermal paper samples 15 cm above a heating source with dispersed ninhydrin crystals in a vacuum chamber. The optimized conditions for ninhydrin sublimation are 50 mg ninhydrin, 2 to 5 mbar vacuum, and 150 degrees C heating source temperature for 30 min. The application of this method is also successful on the new euro notes. Latent fingerprints can be developed across the transitions from paper to optical variable device (OVD).     

Genipin, a novel fingerprint reagent with colorimetric and fluorogenic activity, part II: optimization, scope and limitations

Genipin, a hydrolytic product of geniposide extracted from gardenia fruit, was thoroughly studied as a potential fingerprint reagent, and optimal conditions for fingerprint development have been determined. Latent fingerprints on paper items that have been treated with a non-ink running formulation containing 0.17% of the reagent, showed up as both colored and fluorescent images. On brown wrapping paper and on papers with highly luminescent backgrounds, genipin developed more visible and clearer prints than did classical reagents such as ninhydrin or DFO. Another potential advantage of genipin is that it is totally harmless and an environmentally friendly reagent.     

Enhancement of ninhydrin- or DFO-treated latent fingerprints on thermal paper

A new method for enhancement of ninhydrin or 1,8-diazafluoren-9-one (DFO)-treated latent fingerprints on thermal paper will be described. Most thermosensitive surfaces of thermal paper become dark when treated with DFO or ninhydrin petroleum ether (NPB) solution. This effect minimizes contrast between the developed fingerprints and the background. The new method described reduces this dark staining without removing the thermosensitive layer and parts of the developed fingerprints, as occurs with acetone washing. Through the new method, the developed fingerprints appear in sharp lines and high contrast. Extensive tests were performed, leading to an optimized working solution, which charges the paper with a minimum of chemicals, is cheap, and enables a large quantity of papers to be treated in a short time. The working solution contains commercially available, nonvolatile, nitrogenous organic compounds and can be used like the application of NPB solution by dipping.     

Fingerprint reagents with dual action: color and fluorescence

We define "dual fingerprint reagents" as chemical formulations that produce with latent fingerprints in one stage impressions that are both colored and fluorescent. Solutions containing ninhydrin and group IIb metal salts appear to be true dual reagents. Application of these formulations to latent fingerprints on paper is as efficient as the two-step process beginning with ninhydrin and followed by treatment with metal salt. In the color mode, fingerprint detectability with the two ninhydrin-metal salt reagents (one with zinc chloride and the other with cadmium chloride) is comparable with that of ninhydrin itself, in spite of the difference in color. The sensitivity is significantly higher in the fluorescence mode. To view the latent impressions the exhibits are treated with ninhydrin-metal salt reagents and observed under white light illumination and under fluorescence conditions. Cooling to liquid nitrogen temperature enhances the fluorescence considerably. In the shorter wavelength domain, ninhydrin-metal salt reagents exhibit higher sensitivity than the recently reported dual reagent, genipin. The latter is advantageous, however, in the longer wavelength domain, on paper items with strong self-fluorescence, such as brown wrapping paper or paper printed with fluorescent ink. Upon reduction of the ninhydrin concentration 10-fold, ninhydrin-metal salt formulations become purely fluorogenic reagents; no color is noticed but the fluorescence is as intense as with concentrated solutions. Working at lower concentrations is an advantage from ecological and economical viewpoints.     

Synthesis and evaluation of ninhydrin analogues as reagents for the development of latent fingerprints on paper surfaces

Thirteen ninhydrin analogues have been synthesized and evaluated as amino acid-specific fingerprint reagents. All of the ninhydrin analogues tested developed latent fingerprints on paper surfaces in a manner similar to ninhydrin itself. The photoluminescent enhancement of prints developed with each reagent was assessed after treatment with zinc(II) or cadmium(II). The results obtained have been related to the effects of substitution on the ninhydrin skeleton. Two compounds in particular, 5-methoxyninhydrin and benzo[f]ninhydrin, were shown to offer operational advantages over ninhydrin on a number of difficult surfaces. Prints developed with either reagent show stronger room temperature luminescence after zinc(II) or cadmium(II) treatment in comparison with equivalent prints developed with ninhydrin. Both 5-methoxyninhydrin and benzo[f]ninhydrin have been shown to be effective on surfaces where background luminescence precludes the successful enhancement of ninhydrin-developed prints.     

An investigation into the enhancement of fingermarks in blood on paper with genipin and lawsone

The abilities of two natural products, genipin and lawsone, to enhance blood contaminated fingermarks on papers of various porosities and colour were investigated and compared to the routinely used amino acid reagents, ninhydrin and 1,8-diazafluoren-9-one (DFO).Fingermarks in blood were deposited as a split depletion series on various paper types and colours for ageing periods of 6 weeks, 4 weeks, 2 weeks and 1 week before enhancement. The developed marks were observed under different lighting conditions, recorded and graded by way of attributing quantitative data to each series.Results indicated that while genipin showed some potential as a reagent for the enhancement of latent fingermarks, it displayed no suitability for the enhancement of fingermarks in blood on paper. Lawsone also failed to successfully enhance either type of fingermark. Upon comparison of the results with those of ninhydrin and DFO it was found that ninhydrin displayed the highest success rate of development of these marks.     

A further study to investigate the detection and enhancement of latent fingerprints using visible absorption and luminescence chemical imaging

This study investigated the application of chemical imaging to the detection of latent fingerprints using the Condor macroscopic chemical imaging system (ChemImage Corp., Pittsburgh, USA). Methods were developed and optimised for the visualisation of untreated latent fingerprints and fingerprints processed with DFO, ninhydrin, cyanoacrylate, and cyanoacrylate plus rhodamine 6G stain. The results obtained with chemical imaging were compared to the detection achieved using conventional imaging techniques. The Condor significantly improved the detection of many prints, especially those that might be considered poor quality or borderline prints. Prints on newspaper treated with ninhydrin and DFO, and prints on white and yellow paper treated with ninhydrin, benefited the most from chemical imaging detection. In many cases, fingerprints undetectable using conventional imaging techniques could be visualised with chemical imaging. Ridge detail from untreated prints on yellow paper was also detected using the Condor. When prints of high quality were examined, both detection techniques produced quality results. The results of this project demonstrate that chemical imaging offers advantages over conventional visualisation techniques when examining latent fingerprints, especially those that would be considered difficult, such as weak prints or prints on surfaces that produce highly luminescent backgrounds. Standard testing procedures for the detection and enhancement of fingerprints by chemical imaging are presented and discussed.     

Improvement in Latent Fingerprint Detection on Thermal Paper Using a One‐Step Ninhydrin Treatment with Polyvinylpyrrolidones (PVP)

Abstract: Most thermosensitive surfaces of thermal paper turn black when they come into contact with polar organic solvents such as are used in ninhydrin petroleum benzin solution. This dark staining reduces the contrast between the developed fingerprint and the background to such an extent that the identification process becomes very difficult. Integrating polyvinylpyrrolidones (PVP) into a ninhydrin solution prevents the black staining, and the developed fingerprints appear in clear contrast to the background. The new ninhydrin solution containing PVP is successful compared to the two‐step ninhydrin–acetone washing method for thermal paper which is popular in Germany.     

Evaluation of a Hot Print System for the development of latent fingermarks on thermal paper: A pseudo-operational trial

Enhancement of latent fingermarks on thermal paper poses a number of problems when using traditional methods used for porous substrates due to blackening of the thermal layer as a result of polar solvents present within the reagents and high temperatures oxidising the acid/dye complex. Thus, methods which prevent such reactions are favoured for the development of latent prints on said substrates. A comparative pseudo-operational trial using UV, Hot Print System (HPS), ninhydrin and ThermaNIN was performed on 1000 thermal paper substrates gathered from various sources. The results indicated that the most effective method was an acetone pre-wash followed by ninhydrin. The sequence of HPS-ninhydrin was similarly effective when compared to ninhydrin as a sole technique. ThermaNIN produced fewer marks than ninhydrin but was superior to HPS. Whilst the HPS developed some fingermarks, there was only a very small number of marks uniquely developed by it.