中国人肱骨的性别鉴定

目的 建立中国人肱骨性别判定的方程。方法 测量了来自全国9省区的已知生前确切性别的103个个体的左右侧肱骨的12项测量指标,使用SPSS软件,对所获得的测量数据,进行男女性别间测量数据的t检验。剔除性别检验差异不显著的测量项目,使用Fisher判别分析方法,建立肱骨性别判定方程。结果 单一测量指标的性别判定方程20组,性别判别率为75.9％～89.3％;肱骨上端的性别判定方程2组,性别判别率为83.6％～85.7％;肱骨中段的性别判定方程2组,性别判别率为81.3％～83.9％;肱骨下端的性别判定方程2组,性别判别率为82％。完整肱骨的性别判别率,左侧87％,右侧90.9％,双侧肱骨的性别判别率为96.3％。结论 建立的肱骨性别判别方程,适用于中国人肱骨的性别判定。     

Sex determination from the talus of Koreans by discriminant function analysis

The aims of this study were to investigate the sex discriminating potential of the talus in Koreans and compare this with other analyses in different populations. Statistical analyses were performed using data from nine measurements acquired from 140 tali (70 men, 70 women). The talus of Koreans is dimorphic between sexes in all measurements (p < 0.01). Discriminant function equations were generated by univariate, multivariate, and stepwise methods with a range of accuracy from 67.1 to 87.1%. Stepwise equations of other populations did not discriminate the sex of the Korean sample as accurately as each equation's own accuracies. The variables with high accuracy in this study are useful for sex determination of Koreans on the basis of confirmation of population specificity.     

Determination of sex from juvenile crania by means of discriminant function analysis

This study provides evidence of craniofacial growth variation between the sexes in juveniles of European descent. Data were collected from lateral cephalometric radiographs belonging to the Michigan Craniofacial Growth Study. The collection consists of longitudinal lateral radiographs that represent individuals 5-16 years of age. Each radiograph was manually traced on hyprint vellum from which eight craniometric points were identified. From these points, 20 craniofacial measurements were recorded and then analyzed by means of a canonical discriminant function analysis. Sex classification equations were then created by applying a backward stepwise procedure to the discriminant functions. The analysis demonstrates the presence of sexually dimorphic differences in craniofacial growth. The neurocranium is the most sexually dimorphic region of the juvenile craniofacial skeleton, until the onset of puberty. Size is the main source of variation with males having taller and longer heads than females. Overall, sex classification in the sample ranges from 78 to 89% accuracy.     

Determination of sex by discriminant function analysis of postcranial skeletal measurements

Thieme and Schull [16] took measurements of seven postcranial traits from black skeletons of known sex to devise a method for accurately sexing human remains. With a linear discriminant function analysis of the data they obtained a 98.5% accuracy. The research reported here was designed to assess the accuracy of their method in the hands of other investigators using a sample of the same black population and its applicability to other populations of the same and different races. None of the samples used in this study were sexed with the same rate of accuracy either achieved or predicted by Thieme and Schull. However, two samples did reach 91% or better. Such results suggest that the methods employed have considerable value if used with appropriate precautions. Our multiple discriminant function analysis strongly indicates that neither side nor observer techniques affected the results. Sex accounts for a predominant fraction of the total variation among samples and race accounts for most of that remaining.     

Sex determination by discriminant function analysis of lateral cranial form.

To sex the cranium, morphological features of cranial specimens were quantified with a personal computer that automatically measures distance and gradient for 39 craniometric points in the lateral contour line of the skull, which were digitized by a tablet digitizer connected to the computer. Specimens used for discriminant analysis were 50 male and 50 female adult Japanese skulls. The lateral contour showed sex differences in the nasal bone, supraorbital ridge, forehead and vertex. The nasal bone and supraorbital ridge were more developed in male contour line, and the forehead was more rounded in female contour line. But compared with the supraorbital ridge and forehead, the vertex had a wide variety of contour lines in both sexes. The vertex seemed to be less reliable as the indicator of sex. The sex differences were better reflected by gradient than distance. From variables of the gradient and distance showing significant sex differences, the discriminant function was derived and tested in 21 other specimens (13 male and 8 female skulls). The mean ratio of correct sexing of the human skull by the discriminant function was 86%.     

Determination of sex by discriminant function analysis and stature by regression analysis: a lateral cephalometric study

Determination of sex and estimation of stature from the skeleton is vital to medicolegal investigations. In the present study, an attempt is made to determine sex and estimate stature of an individual using data derived from lateral cephalogram in Central Indian population. Skull is composed of hard tissue and is the best preserved part of skeleton after death, hence, in many cases it is the only available part for forensic examination. Lateral cephalogram is ideal for the skull examination as it gives details of various anatomical points in a single radiograph, also it easily provides architectural and morphological details of skull superstructures and intra-cranial details for comparisons. A discriminant function derived from 10 cephalometric variables provided 99% reliability in sex determination. The formulae obtained from regression analysis using the maximum length of skull showed very high degree of reliability for estimation of stature in males as well as females.     

51个常染色体STR基因座在ITO法判断全同胞中的应用

目的探讨ITO法和判别函数法在全同胞鉴定中的应用价值。方法根据342对全同胞和3 900对无关个体的19、21、39、51个常染色STR基因座的分型结果,采用ITO法计算全同胞关系指数(FSI)。用SPSS软件Fisher判别分析法,分别建立lg FSI全同胞-无关个体的判别函数。结果每组全同胞对和无关个体对的lg FSI符合正态分布,具有显著性差异。在19、21、39、51个STR基因座,全同胞组判别函数分别为L同胞=1.666 6×lg FSI-5.208 0,L同胞=1.643 9×lg FSI-5.512 0,L同胞=1.569 4×lg FSI-8.076 4,L同胞=1.480 7×lg FSI-9.860 9;无关个体组分别为L无关=-1.346 1×lg FSI-3.638 5,L无关=-1.330 9×lg FSI-3.851 7,L无关=-1.319 2×lg FSI-5.910 2,L无关=-1.273 8×lg FSI-7.477 6。平均错判率分别为:1.361 9%、1.228 5%、0.438 6%和0.146 2%。结论 ITO判别函数法在全同胞-无关个体鉴定中具有很高的应用价值,且检测基因座越多,系统效能越高,并能降低错判风险。     

Sex determination of Chinese femur by discriminant function

The objective of this study was to provide a method of sex determination for Chinese femur, especially for fragmentary remains. Statistical analysis of 17 measurements based on 141 northeastern Chinese femora shows that all measurements have significant sex differences. Sex determination by the midpoint method of a single measurement can obtain an average accuracy of 76.8%. The results indicate that of all dimensions the maximum head diameter is the best discriminator of sex. It alone can determine the sex of a femur with 85.1% accuracy. The results also show that maximum head diameter, transverse head diameter, epicondylar breadth, upper breadth, and medial condylar length have higher sexual dimorphisms than the dimensions of length. According to the result to stepwise discriminant analysis and the need for sexing fragmentary remains, 22 discriminant functions composed of various combinations of variables were calculated which can determine the sex of the femur correctly 82.3 to 87.2%. The methods of sex determination provided by this paper can be used to sex poorly preserved femora.     

A discriminant function analysis of deciduous teeth to determine sex

Studies of deciduous teeth have concluded that crown size differences in these teeth between males and females are not reliable sex discriminators, in contrast to such differences in permanent teeth. This study measured the mesiodistal and faciolingual crown diameters of all deciduous teeth, as well as those of the permanent first molars, of 162 children from the Burlington Orthodontic Growth Study, conducted earlier in Burlington, Ontario, Canada. All 40 deciduous tooth diameters (20 mesiolingual and 20 faciolingual) were significantly different between the sexes, as were the permanent tooth diameters. Using three to five measurements of deciduous teeth, discriminant analyses of several samplings of these children produced discriminant functions in which 76 to 90% of the holdout samples were correctly classified by sex. Combinations of deciduous and permanent measurements were used to classify 83 to 85% of the holdout samples correctly. When compared with published data on other sample populations, the Burlington group is the most dimorphic for deciduous teeth and is within the range of permanent tooth dimorphisms of other populations. The level of classification accuracy, when using discriminant analysis of the deciduous teeth, can approach the accuracy levels of analysis using the permanent teeth.     

Sex estimation in a modern American osteological sample using a discriminant function analysis from the calcaneus

Reliable methods for sex estimation during the development of a biological profile are important to the forensic community in instances when the common skeletal elements used to assess sex are absent or damaged. Sex estimation from the calcaneus has potentially significant importance for the forensic community. Specifically, measurements of the calcaneus provide an additional reliable method for sex estimation via discriminant function analysis based on a North American forensic population. Research on a modern American sample was chosen in order to develop up-to-date population specific discriminant functions for sex estimation. The current study addresses this matter, building upon previous research and introduces a new measurement, posterior circumference that promises to advance the accuracy of use of this single, highly resistant bone in future instances of sex determination from partial skeletal remains. Data were collected from The William Bass Skeletal Collection, housed at The University of Tennessee. Sample size includes 320 adult individuals born between the years 1900 and 1985. The sample was comprised of 136 females and 184 males. Skeletons used for measurements were confined to those with fused diaphyses showing no signs of pathology or damage that may have altered measurements, and that also had accompanying records that included information on ancestry, age, and sex. Measurements collected and analyzed include maximum length, load-arm length, load-arm width, and posterior circumference. The sample was used to compute a discriminant function, based on all four variables, and was performed in SAS 9.1.3. The discriminant function obtained an overall cross-validated classification rate of 86.69%. Females were classified correctly in 88.64% of the cases and males were correctly classified in 84.75% of the cases. Due to the increasing heterogeneity of current populations further discussion on this topic will include the importance that the re-evaluation of past studies has on modern forensic populations. Due to secular and micro evolutionary changes among populations, the near future must include additional methods being updated, and new methods being examined, both which should cover a wide population spectrum.     

Sex assessment from carpals bones: discriminant function analysis in a contemporary Mexican sample

Sex assessment is one of the first essential steps in human identification, in both medico-legal cases and bio-archaeological contexts. Fragmentary human remains compromised by different types of burial or physical insults may frustrate the use of the traditional sex estimation methods, such as the analysis of the skull and pelvis. Currently, the application of discriminant functions to sex unidentified skeletal remains is steadily increasing. However, several studies have demonstrated that, due to variation in size and patterns of sexual dimorphism, discriminant functions are population-specific. In this study, in order to improve sex assessment from skeletal remains and to establish population-specific discriminant functions, the diagnostic values of the carpal bones were considered. A sample of 136 individuals (78 males, 58 females) of known sex and age was analyzed. They belong to a contemporary identified collection from the Laboratory of Physical Anthropology, Faculty of Medicine, UNAM (Universidad Nacional Autónoma de México, Mexico City). The age of the individuals ranged between 25 and 85 years. Between four and nine measurements of each carpal bone were taken. Independent t-tests confirm that all carpals are sexually dimorphic. Univariate measurements produce accuracy levels that range from 61.8% to 90.8%. Classification accuracies ranged between 81.3% and 92.3% in the multivariate stepwise discriminant analysis. In addition, intra- and inter-observer error tests were performed. These indicated that replication of measurements was satisfactory for the same observer over time and between observers. These results suggest that carpal bones can be used for assessing sex in both forensic and bio-archaeological identification procedures and that bone dimensions are population specific.     

Sex determination by discriminant function analysis of the right tibia in the prehispanic population of the Canary Islands

This study has been performed in order to define standards usable to determine the sex of prehispanic individuals from the Canary Islands from their skeletal remains. Osteometric information at the right tibia was obtained from 59 complete skeletons from Gran Canaria, housed in the Museo Canario (Las Palmas), 45 males and 14 females (this constitutes the totality of complete prehispanic skeletons known from Gran Canaria). The parameters measured were: tibial length, proximal and distal epiphyseal breadth, transverse and anteroposterior diameter, perimeter at the nutrition foramen levels and minimum shaft perimeter. These parameters were subjected to different SPSS discriminant function analysis, combining all of them, or only the proximal or distal ones, without tibial length, etc., in order to obtain functions usable even if only bone fragments are available. Transverse diameter, proximal epiphyseal breadth and minimum shaft perimeter showed the highest discriminant power. The functions obtained showed high average accuracies, ranging from 94.9 to 98.3%, with female accuracies of 100%. The functions obtained were further applied to a test prehispanic population (ten males and ten females) from El Hierro. Overall accuracies of the functions when applied to this population ranged from 65 to 94.7%, with female accuracies ranging 80% to 100%.     

Sex assessment from the carpals bones: discriminant function analysis in a 20th century Spanish sample

Sex assessment is one of the first essential steps in human identification, in both medico-legal cases and bio-archaeological contexts. Fragmentary human remains compromised by different types of inhumation or physical insults may frustrate the use of the traditional sex estimation methods, such as the analysis of the skull and pelvis. Currently, the application of discriminant functions to sex unidentified skeletal remains is steadily increasing. However, several studies have demonstrated that, due to variation in size and patterns of sexual dimorphism, discriminant function equations are population-specific [1,2,5,12,61]. In this study, in order to improve sex assessment from skeletal remains and to establish population-specific discriminant functions, the diagnostic values of the carpal bones were considered. A sample of 100 individuals (50 males and 50 females) of known sex and age was analyzed. They belong to a 20th century identified collection from the Municipal Cemetery of "San José", Granada (Spain) and housed in the Laboratory of Anthropology, Faculty of Medicine, University of Granada (Spain). The age of the individuals ranged between 22 and 85 years. Between four and nine measurements of each carpal bone were performed [41,59]. Discriminant function statistics showed a sex assessment accuracy as high as 97.8%. The results suggest that carpal bones can be used for assessing sex in both forensic and bio-archaeological identification procedures.     

Determination of race and sex of the human skull by discriminant function analysis of linear and angular dimensions

The race and sex of the human skull can be determined by craniometry. In this paper we suggest that a large number of craniometric measurements does not necessarily give the best possible discrimination for race and test the performance of subsets of variables drawn from various skull regions, or extracted mathematically on the basis of their discriminatory power. We also suggest that the best discriminators for race are not necessarily the best for sex, and that skulls of unknown provenance are best tested first for race and then for sex, using different variables for each purpose.     

Differences among species in compact bone tissue microstructure of mammalian skeleton: use of a discriminant function analysis for species identification

In order to develop an identification key for distinguishing between several mammalian species, bone structure of their compact bone tissue was analyzed using qualitative and quantitative characteristics. Ninety femora of adult male humans, pigs, cows, sheep, rabbits, and rats were studied. The average area, perimeter, minimum, and maximum diameter of 1863 Haversian canals and 1863 secondary osteons were measured using a digital image device. The observed data were first used to evaluate inter- and intraspecies diversity. After that, we applied a discriminant function analysis for differentiation of the species by these variables. Classification functions for investigated species give cross-validated correct classification rates for 76.17% of cases. This percentage value can be increased by integrating conclusions from the qualitative analysis.     

Determining dental sex dimorphism in South Indians using discriminant function analysis

Dental forensics forms a vital branch of forensic science which deals with proper handling, examination and evaluation of dental evidences for identification of victims of crime, accidents or calamities. Therefore skull and teeth often provide the identification material. The aim of the study was to investigate the accuracy of odontometric methods in sex determination of permanent teeth and to compute new formula to differentiate male and female teeth using discriminant function analysis for South Indian population. A total of 100 subjects were selected for the study from a parent population of 4800 students by simple random sampling method. Alginate impressions of the upper dental arch were made and casts were poured immediately. A digital vernier calliper was used for the measurement of all upper anteriors. Twelve different tooth measurements were recorded and from those two indexes have been computed. Statistical analysis was performed using the SPSS version 17.0 software. All the predictor variables were subjected to stepwise discriminant function analysis which optimally separates the genders and a best discriminant function was generated. In all the observed mean dimensions, male values exceed the female values. Student's 't' test for the different predictor variables of all teeth selected between male and females were found significant (p < 0.05). Very high significance was found in mean MD of 11, 12 and 13 and |c| of 23. The variables exhibiting best discriminant powers were mesiodistal width of both upper central incisors, DB-ML of 13 and canine crown module of 13. Sexual dimorphism in the size of permanent teeth differs from one population to the other and hence the standards set for one population could not be applied for another population. Hence this technique would be a simple, quick, cost effective, reliable and accurate for sex determination.     

Sex determination by discriminant analysis of patella measurements

The authors have analyzed 80 skeletons (40 males and 40 females) from the collection at the Institute of Legal Medicine of the University of Bari belonging to a known contemporary Southern Italian population; time of death was around 1970 and ages ranged from 25 to 80 years. Seven measurements taken on 80 intact, undeformed right patellae (max height, max width, thickness, height and width of the external facies articularis, height and width of the internal facies articularis) were used to determine sex by multivariate discriminant analysis. One function associating two parameters (max width and thickness) obtained the highest value of correct sex determination with a rate of 83.8%; other functions showed a higher percentage of misclassification (up to 17.5%). This study tests the success rate of correct sex prediction based exclusively on patellar dimensions. The discriminant functions carried out by statistical analysis may aid the forensic anthropologist when no other human skeletal remains suitable for sex determination are available.     

Sex diagnosis of Chinese skulls using multiple stepwise discriminant function analysis.

Sixty Chinese skulls (30 males and 30 females) from Liaoning Province of the People's Republic of China were used in this study. Forty-one variables on each skull were measured and one group of 14 and a second group of 5 variables were selected from all the variables by applying multiple stepwise regression on a computer. Discriminant equations for the 14 and 5 variables for sex diagnosis have been obtained and these variables are highly significant. The discriminant rate for the group of 5 variables resulted in accurate sex determination in 96.7% of cases. For the group of 14 variables there was 100% success rate.     

活体跟骨数字X线片性别判定

目的应用数字X线摄影方法测量跟骨,评估5项测量指标在法医学性别判定中的价值。方法393例受试对象随机分组,实验组334例(男性148例,女性186例),验证组59例(男性26例,女性33例)。每一受试对象按照规定投照方法摄跟骨侧位DR片,分别测量5项跟骨长度指标。方差分析检验实验组各项指标性别间差异,Fisher判别分析及多元逐步判别分析建立性别判别函数。验证组样本数据回代,前瞻性评估判别效能。结果5项指标性别差异有统计学意义(P<0.001)。共建立了6组性别判别函数,性别判断正确率在78.4%～88.9%之间;回代检验,判断正确率在79.7%～86.4%之间。结论跟骨侧位数字X线片5项长度测量指标代入判别函数进行性别判定的方法可为法医学个人识别中的性别判定提供帮助。