A comparative evaluation of the disulfur dinitride process for the visualisation of fingermarks on metal surfaces

The disulfur dinitride process for fingermark visualisation was first reported a decade ago, with promising results obtained for a range of materials including metals. However, the friction sensitive nature of the material and difficulty of synthesis made routine use difficult. Many of these issues have since been addressed, making equipment and chemicals available to build an understanding of how the effectiveness of disulfur dinitride compares to other fingermark visualisation processes currently used on metal surfaces. This enables more informed advice to be given on selection of processes for treatment of metal items, an area of operational interest that encompasses weapons used in violent crime and the increasing incidence in metal theft. This paper reports a comparative study into the effectiveness of disulfur dinitride, cyanoacrylate fuming, vacuum metal deposition, gun blueing and wet powder suspensions on brass, bronze, copper and stainless steel. Experiments were conducted with the surfaces exposed to a range of environments including long term ageing, water/detergent washing, acetone washing and high temperature exposure. The results indicate that disulfur dinitride is an effective process for fingermark visualisation on metal surfaces, including those exposed to adverse environments, and may offer potential improvements over existing processes for those surfaces. Further work, including pseudo-operational trials, is recommended.     

Improving the technological readiness of time of Flight-Secondary Ion Mass Spectrometry for enhancing fingermark recovery - towards operational deployment

The processes routinely used by police forces to visualise fingermarks in casework may not provide sufficient ridge pattern quality to aid an investigation. Time of Flight-Secondary Ion Mass Spectrometry (ToF-SIMS) has been proposed as a technique to enhance fingermark recovery. The technique is currently designated a Category C process in the Fingermark Visualisation Manual (FVM) as it shows potential for effective fingermark visualisation but has not yet been fully evaluated. Here the sensitivity of ToF-SIMS on three common exhibit-type surfaces - paper, polyethylene and stainless-steel was compared to standard processes. An adapted Home Office grading scale was used to evaluate the efficacy of fingerprint development by ToF-SIMS and to provide a framework for comparison with standard processes. ToF-SIMS was shown to visualise more fingerprints than the respective standard process, for all surfaces tested. In addition, ToF-SIMS was applied after the standard processes and successfully enhanced the fingerprint detail, even when the standard process failed to visualise ridge detail. This demonstrates the benefit for incorporating it into current operational fingermark development workflows. Multivariate analysis (MVA), using simsMVA, was additionally explored as a method to simplify the data analysis and image generation process.     

Styryl dye coated metal oxide powders for the detection of latent fingermarks on non-porous surfaces

Conventional fingermark powders rely on contrast induced by absorption/reflection (e.g. black powder) or luminescence in the visible region (e.g. Blitz Green(?)). In most cases, these powders provide sufficient contrast; however, in some circumstances surface characteristics can interfere with the visualisation of powdered fingermarks. Visualisation in the near infra-red (NIR) region, however, has been shown to eliminate interferences commonly encountered in the visible region. In this study, a mixture of rhodamine 6G and the NIR laser dye styryl 11 (STaR 11) was coated onto an aluminium oxide nanopowder and then mixed with silver magnetic powder to develop and visualise fingermarks in the NIR. When compared to Blitz Green(?), it was determined that the STaR 11 magnetic powder was better suited for marks deposited on textured surfaces and for older marks, whereas Blitz Green(?) performed better on smooth glossy surfaces. The ability of the STaR 11 mixed dye formulation to be visualised in both the visible and NIR regions also provides a significant advantage over conventional luminescent fingermark powders.     

National fingermark visualisation collaborative exercise 2020

In 2020, the Defence Science and Technology Laboratory organised and ran what is believed to be the first UK national collaborative exercise of its kind in the field of fingermark visualisation, on behalf of the Forensic Science Regulator. Laboratories were provided with a piece of wrapping paper, a challenging item for fingermark visualisation due to its semi-porous characteristics, both from a planning and processing perspective, and asked to treat it as a major crime exhibit. Due to the complexity of the substrate, variation in approach was anticipated. 23 laboratories from 21 organisations completed the exercise. In general, laboratories performed well, providing assurance to the Forensic Science Regulator regarding their ability to visualise fingermarks. Key learning points were identified around decision-making, planning and implementation of fingermark visualisation processes – all of which assist in raising the level of understanding around the likely success of fingermark visualisation. Lessons learnt, along with the overall findings, were shared and discussed in a workshop held in summer 2021. The exercise provided a useful insight into the current operational practices of participating laboratories. Areas of good practice were identified as well as the areas within the laboratories’ approach that could be altered or adapted.     

Fingermark visualisation on metal surfaces: An initial investigation of the influence of surface condition on process effectiveness

Fingermark recovery from metal surfaces is an area of operational interest, both from the association of metals with weapons used in violent crime and from the increasing incidence in metal theft. This paper reports a feasibility study into the effectiveness of a range of fingermark visualisation processes in developing fingermarks on clean metals (brass, bronze and stainless steel), and on the same metals after prolonged exposure to an outdoor environment. Scanning electron microscopy (SEM) was used to investigate how the surface type and condition could influence the development of fingermarks for each of the processes used. It was found that the behaviour observed varied between each of the processes (cyanoacrylate fuming, Lumicyano?, gun blueing and carbon-based powder suspension). In some cases the chemical composition of the surface affected the development of the mark more than the surface condition, and in other cases the reverse was true. The best performing processes differed according to the surface type and condition, with cyanoacrylate fuming processes working best on brass and bronze, and powder suspensions being better on stainless steel. These preliminary results reinforce the need to take into account both surface type and condition before selection of the most effective fingermark visualisation process and demonstrate the value of techniques such as SEM in developing a fundamental understanding of the interactions between fingermarks and surfaces.     

The effect of corrosive substances on fingermark recovery: A pilot study

Corrosive substance attacks have become a growing issue within the UK. Although most commonly occurring in gang-related offences, there are high profile instances where this type of attack has been used to attack women to disfigure and destroy livelihoods. Despite the increase in such attacks, there has been very little published research into the recovery of forensic evidence from items used in these crimes. The effect of corrosive substances on the recovery of different types of forensic evidence is unknown, and there is no guidance for laboratories processing exhibits contaminated with corrosive substances regarding optimum treatments. This pilot study focused on establishing the effectiveness of a range of fingermark visualisation processes in recovering fingermarks on surfaces exposed to concentrated sulfuric acid (acid) and potassium hydroxide (alkali). Results indicate that on non-porous surfaces vacuum metal deposition and powder suspensions remain effective, and on porous surfaces fingermarks could still be visualised with physical developer. Alkalis were found to be more detrimental than acid environments in this limited study. The results demonstrate that fingermark recovery is still feasible on surfaces exposed to corrosive substances and provides encouragement that treatment protocols could be developed for this type of exhibit.     

Separation of overlapping fingermarks by Matrix Assisted Laser Desorption Ionisation Mass Spectrometry Imaging

Latent fingermarks are impressions of the skin ridge pattern that are transferred by the accidental contact of fingertips with a deposition surface. The ability to enhance, lift and produce an image of a latent fingermark, for comparison and suspect match against a central fingerprint database, provides forensic investigators with what is still considered one of the most powerful means of biometric identification to date. Identification relies on the recovery, visualisation, extraction and comparison of local characteristics of the ridge pattern (minutiae) that are unique to individuals. Therefore, both for manual inspection of the minutiae and using automated ridge extraction algorithms, the clearer the ridge details, the more reliable and successful the match. Overlapping fingermarks pose a remarkable challenge in this context and are often encountered when developing marks from crime scenes. Here we propose the use of Matrix Assisted Laser Desorption Ionisation Mass Spectrometry Imaging (MALDI MSI) to separate overlapping fingermarks using ion signals that are characteristic of each fingermark and that may be endogenous or exogenous in nature. In this work we show that the methodology works in a number of different scenarios both using manual inspection of the spectrum profile or a much quicker multivariate statistical analysis.     

Evaluation of the one-step Lumicyano™ used in the visualisation of fingermarks on fabrics

This study consisted of three parts to evaluate the performance of Lumicyano? on a variety of fabrics. One part assessed the impact of dye percentage (8%, 9% and 10%) on visualisation of fingermark detail and luminescent brightness in split grab marks. A 9% dye produced the highest quality detail of grab impressions with least interference from background fluorescence. The second part investigated the optimal relative humidity (RH, 75–84%) for certain fabric types using Lumicyano on split, six-series depletion fingermarks. It was concluded that the recommended RH of 80% remained the ideal cyanoacrylate fuming environment. The final and third part of this study determined the impact of sequential addition of Basic Yellow 40 (BY40) on Lumicyano compared to traditional cyanoacrylate (CA) followed with BY40 application. Results from this study demonstrated that Lumicyano on its own developed fingermarks with superior quality to Lumicyano with sequential addition of BY40 or traditional cyanoacrylate followed by BY40. Inclusion of more fabrics, donors and longer ageing periods should be explored in future studies to determine what frameworks are best for certain types of fabrics.     

The Compatibility of Fingerprint Visualization Techniques with Immunolabeling

The chemical composition of a fingermark potentially holds a wealth of information about the fingermark donor, which can be extracted by immunolabeling. Immunolabeling can be used to detect specific components in fingermarks; however, to be applicable in the forensic field, it should be compatible with commonly used fingerprint visualization techniques. In this study, the compatibility of immunolabeling with two different fingerprint visualization techniques, magnetic powdering and ninhydrin staining, was investigated on fingermarks deposited on glass and on nitrocellulose membranes. With dermcidin as antigen of interest, immunolabeling was performed successfully on all developed fingermarks. We can conclude that immunolabeling is compatible with magnetic powdering and ninhydrin staining, which can be of great forensic value.     

Development of Latent Fingermarks on Surfaces of Food‐A More Realistic Approach

Latent fingermark developing methods from food (mandarin, egg, banana, apple, potato, carrot, eggplant, onion, bell pepper, and tomato) surface has been studied by 10 methods, including powdering method, small particle reagent method, and cyanoacrylate fuming method. The foods were stored under two conditions (room temperature and refrigerator) before fingermark deposition and aged for 2, 24, 48, and 72 h before fingermark development. In most of the food surfaces used in this study, cyanoacrylate fuming with 80% relative humidity was superior to the powder or small particle reagent methods. The quality of the fingermarks varied depending on the storage conditions before the fingermark deposition (in the refrigerator or at ambient temperature) and the time elapsed since the fingermark deposition. However, the storage conditions before the fingermark deposition and the time elapsed since the fingermark deposition did not show any correlation with the quality of the fingermark.     

Unlocking the potential of forensic traces: Analytical approaches to generate investigative leads

Forensic investigation involves gathering the information necessary to understand the criminal events as well as linking objects or individuals to an item, location or other individual(s) for investigative purposes. For years techniques such as presumptive chemical tests, DNA profiling or fingermark analysis have been of great value to this process. However, these techniques have their limitations, whether it is a lack of confidence in the results obtained due to cross-reactivity, subjectivity and low sensitivity; or because they are dependent on holding reference samples in a pre-existing database. There is currently a need to devise new ways to gather as much information as possible from a single trace, particularly from biological traces commonly encountered in forensic casework. This review outlines the most recent advancements in the forensic analysis of biological fluids, fingermarks and hair. Special emphasis is placed on analytical methods that can expand the information obtained from the trace beyond what is achieved in the usual practices. Special attention is paid to those methods that accurately determine the nature of the sample, as well as how long it has been at the crime scene, along with individualising information regarding the donor source of the trace.     

Preparation of cyanoacrylate derivatives and comparison of dual action cyanoacrylate formulations

The use of cyanoacrylate followed by fluorescent reagents is well known in the field of fingermark visualisation. Treatment with fluorescent reagents that stain the cyanoacrylate deposits will not only enhance the visibility of fingermarks previously thought unusable, but also reveal previously unseen marks. Downside of this approach is the exposure of the evidential material to large amounts of solvent, such as water, methanol and ethanol, thereby potentially destroying other forensic traces.New cyanoacrylate derivates with fluorescent and UV-active properties can be used for one step dual action visualisation of latent fingermarks. Increased optical properties can be achieved by addition of functional groups via the Steglich esterification of cyanoacetic acid with N-(3-dimetylaminopropyl)-N′-ethylcarbodiimide (EDC). The UV-active ester can be created via the Knoevenagel condensation with formaldehyde to form poly-cyanoacrylate. These poly-cyanoacrylates can be depolymerised to form monomer cyanoacrylates.In this paper we compare these ethylcyanoacrylate derivatives with commercially available cyanoacrylate formulations.We have shown that the use of poly-cyanoacrylate derivatives can yield fully developed fingerprints. The initiator of the polymerisation reaction towards novel reagents can be altered according to the need for particular optical properties.     

Fingermark detection on non-porous and semi-porous surfaces using YVO4:Er,Yb luminescent upconverting particles

This article describes the use of an anti-Stokes luminescent material (upconverter), yttrium vanadate doped with ytterbium and erbium (YVO(4):Er,Yb), for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes luminescent materials emit light at shorter wavelengths than the excitation wavelength. This property is unusual in both natural and artificial materials commonly found as exhibits in forensic science casework. As a result, fingermark detection techniques based on anti-Stokes luminescence are potentially extremely sensitive and selective. Latent fingermarks on non-luminescent and inherently luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with YVO(4):Er,Yb by dry powder and wet powder techniques. The effectiveness of YVO(4):Er,Yb for fingermark detection was compared with that of cyanoacrylate fuming and of sodium yttrium tetrafluoride doped with ytterbium and erbium (NaYF(4):Er,Yb). The results illustrate some benefit of luminescent up-converting phosphors over traditional luminescence techniques for the detection of latent fingermarks.     

A Preliminary Study on Vacuum Metal Deposition as a Standalone Method for Enhancement of Fingermarks on Ballistic Brass Materials

In order to assess the efficacy of vacuum metal deposition (VMD) as a technique to develop fingermarks on ballistic metallic surfaces, a preliminary study using six donors (three male & three female) was conducted. Using a sequential metal deposition process, two metal combinations were studied—gold/zinc and silver/zinc. Results indicate the potential of this technique, by developing identifiable fingermarks on brass metal disks aged from a few days up to more than a month old. As the development of fingermarks on fired (brass) cartridge cases is an area of interest, a further study was conducted where a total of 20 fingermarks were deposited on cases. After firing, second level fingermark characteristics were successfully observed on cartridge cases highlighting its potential as a fingermark enhancement method for ballistic brass materials. Further work is required to fully evaluate the VMD process and its reliability as a fingermark enhancing method on ballistic surfaces.     

Immunolabeling and the compatibility with a variety of fingermark development techniques

Much information can be obtained from the chemical composition of a fingermark, which can be helpful in crime scene investigation. Immunolabeling can be used to extract information about the donor of the fingermark and it can also act as a fingermark development tool in sequence with the standard fingermark development techniques. However, before immunolabeling can be used in forensic practice more information on the possibilities and limitations of this technique is required. In this study, our aim was to investigate if immunolabeling is compatible with standard development protocols (indanedione-zinc, indanedione-zinc followed by ninhydrin spraying, physical developer, cyanoacrylate fuming, cyanoacrylate followed by basic yellow staining, lumicyanoacrylate fuming and polycyanoacrylate fuming). Immunolabeling was carried out successfully on all developed fingermarks, whereby dermcidin was selected as antigen of interest. We can conclude that immunolabeling is compatible with a wide variety of different fingermark developers. This finding in combination with previous findings, makes immunolabeling an interesting technique, which can be of great value in the forensic field.     

Separation of visibly-excited fluorescent components in fingerprint residue by thin-layer chromatography

The use of lasers for the detection of fingermarks is widespread in the forensic field. Despite this, and the fact that many studies have been conducted into the composition of fingermark residue, the components responsible for the inherent visible fluorescence remain unidentified. Traditionally compositional studies have been performed on sweat, sebum, or skin surface washes, none of which are truly representative of the situation when a fingerprint is deposited on a surface. In this paper thin-layer chromatography (TLC) has been performed on sebum-rich fingermarks laid directly onto TLC plates and an argon ion laser used to visualize the separated components. It has been found to be a robust and reproducible method for studying the fluorescent components in fingermark residue and is considered to be more realistic than other methods of sample preparation as it eliminates the chances of extraneous matter being extracted from the skin surface. Investigations into the nature of the separated compounds have also been made and the results are reported.     

Towards the protection of ammunition headstamps during fingermark enhancement processing; a preliminary study

Forensic recovery from fired ammunition casings remains one of the most challenging tasks during high-profile investigations. Often, the decision must be made between screening for DNA or fingerprints, and, in doing so, the impact these processes will have on the examination of ballistic markings imparted on the ammunition from the firearm itself. Traditionally, fingermark enhancement processes have yielded low success rates in their efforts to identify suspects by enhancing friction ridge detail left on the cartridge casings. Moreover, the enhancement methods utilised may often induce detrimental physical changes to the casing(s), rendering them unsuitable for subsequent ballistics (marking) examination. Recently, new technology has been shown to increase the success rate of fingermark recovery from fired ammunition, and the growing adoption of such innovation means that new challenges are encountered to maximise evidence recovery and streamline forensic workflows. One such example arises from the potential obscuration of the ammunition headstamp area during such treatments. Accordingly, this study outlines the preliminary investigations and developments of a polymer mask substrate that serves to protect the headstamp of fired ammunition casings during relevant fingermark enhancement processes. The technique also has the capacity to be used as a surface protection device to eliminate unwanted chemical deposition across other areas of interest and evidence types.     

The quantification of fingerprint quality using a relative contrast index

Research into fingermark enhancement techniques has traditionally used visual comparisons and qualitative methods to assess their effectiveness based on the quality of the developed fingermark. However, with increasing research into the optimisation of these techniques the need for a quantitative evaluative method has arisen. Parameters for acceptable fingerprint quality are not well defined and generally encompass clear, sharp edges and high levels of contrast between the fingermark ridges and background material. Using these current parameters, a conclusive measurement of fingerprint quality and thus the effectiveness of development techniques cannot be achieved.This study presents a model through which an aspect of fingerprint quality can be objectively and impartially measured based on a relative contrast index, constructed through measuring the reflective intensity of the fingermark ridges against the background material. Using a fibre-optic spectrophotometer attached to a microscope with axial illumination, the intensity counts of the ridge detail and background material were measured and a logarithmic contrast index constructed. The microscope and spectrophotometer parameters were experimentally tested using a standard colour resolution chart with known reflective properties. The protocol was successfully applied to four sample groups: black inked fingerprints on white paper; latent fingermarks on white paper developed separately with ninhydrin and physical developer; and fingermarks in blood deposited on white tiles and enhanced with amido black. The contrast indices obtained quantitatively reflect the level of contrast and provide an indication of fingerprint quality through a numerical representation rather than previous qualitative methods. It has been suggested that the proposed method of fingerprint quantification may be viable for application in the forensic research arena as it allows the definitive measurement of contrast to aid the evaluation of fingermark detection and enhancement techniques.     

The optimisation of fingermark enhancement by VMD and Lumicyano™ on thermal paper

The enhancement of fingermarks on thermal paper can be challenging due to background staining caused by polar solvents used in fingermark enhancement techniques such as ninhydrin. This study explored a commercial one-step superglue fuming process, Lumicyano™, and Vacuum Metal Deposition (VMD) to develop fingermarks on this substrate and overcome this issue. Different sequential treatments involving Lumicyano™ and a combination of VMD methods were investigated with varying degrees of success with some sequences being highly sensitive. The VMD processes, however, were observed to generally be more effective at enhancing marks, whereas Lumicyano™ provided little or no benefit on this paper type. The results indicate that Lumicyano™ is only beneficial as a pre-treatment when the entire sequence of gold/zinc and silver/zinc is taken to completion. The gold/zinc and silver/zinc VMD processes were optimised on five different thermal papers, and the optimised techniques were then directly compared to determine which was more successful on each thermal paper type as a single treatment.     

Latent Fingermark Development on Thermal Paper using 1,2‐Indanedione/Zinc and Polyvinylpyrrolidone,

Polyvinylpyrrolidone (PVP) has been used in combination with 1,2‐indanedione (1,2‐IND) and ZnCl₂ (Zn) to develop latent fingermarks. The results show that the optimal ratio of 1,2‐IND/Zn:PVP is 1.0:0.4 (the concentration of PVP is 8%) for developing fingermark. The developed formulation was tested on the surfaces of 12 kinds of thermal papers. The variation in the fingermark development efficiency was observed within the same and among different kinds of thermal papers. The fingermark development efficiency was mostly better on the thermally sensitive surface compared to the thermally nonsensitive surface. However, similar or even better development was observed from a few thermally nonsensitive surfaces. The present method has shown better efficiency compared to the three other proposed methods on the thermally sensitive surface. In contrast, the present method was proven not the best for the thermally nonsensitive surface.