头颅CT片同一认定研究

目的探寻头颅CT片同一认定的方法。方法分别计算同一被检查者不同次头颅CT片指标差值和不同被检查者头颅CT片指标差值，再应用二分类logistic回归分析相同被检查者和不同被检查者指标差值，建立头颅CT片同一认定回归方程。结果建立头颅CT片同一认定方程46个。结论通过头颅CT片测量可以进行有效同一认定。     

根据颈椎CT片特征指标进行同一认定的研究

目的选择颈椎CT片上的特征指标,建立逐步回归方程,探讨其在法医学同一认定中的应用价值。方法收集130名被检查者颈椎CT片各1张,70名被检查者不同次颈椎CT影像片各2张。选择并测量颈椎CT片上的13项指标值,分别计算被检查者随机分组后相同测量指标的组间差值,以及同一人不同次测量指标间的差值,运用二分类logistic逐步回归分析,建立各项指标的一元回归方程和多项指标的多元回归方程,并对方程进行盲测检验。结果建立的13个一元方程中同一认定的准确率在69.0%~90.4%之间;建立的4个多元回归方程的准确率在90.4%~96.7%之间,盲测准确率为100%。结论本文在CT片上选择的13项特征指标可以用于同一认定,使用时应尽可能选用多元指标以得到更准确的结果。     

根据骨盆CT片特征指标进行同一认定的研究

目的选择骨盆CT片上的特征指标,建立逐步回归方程,探讨其在法医学同一认定中的应用价值。方法收集160名不同被检查者骨盆CT影像片各1张,70名被检查者不同次骨盆CT影像片各2张。选择并测量骨盆CT片上的14项指标值,分别计算不同人随机分组相同测量指标的组间的差值,以及相同人不同次测量指标间的差值,运用二分类logistic逐步回归分析,建立各项指标的一元回归方程和多项指标的多元回归方程,并对方程进行盲测检验。结果建立的14个一元方程中同一认定的正确率在61.1%(骶骨耳状面后缘宽)~80.5%(第一骶椎平面左右髂骨前端间距)之间;建立的6个多元回归方程的正确率在80.5%~93.8%之间。盲测准确率为100%。结论本文在CT片上选择的14项特征指标可以用于同一认定,在使用时应尽可能选用多元指标以得到更准确的结果。     

涉嫌骗保案件中手、足部X线片同一认定的分析

X线摄片诊断存在骨骼影像重叠细节特征容易被掩盖的缺陷,而且每次拍摄角度不完全一致也导致骨骼形态和位置发生变化,因此X线片同一认定的研究不如CT广泛.目前对头颅、腰椎、颈椎、骨盆CT进行同一认定的研究已较系统 [1, 2],而X线片同一认定仅见于对颌面骨包括额窦同一认定指标的研究 [3-5].手、足骨折是工伤常见类型,笔...     

中国汉族成人颅骨CT片同一认定方法的研究

目的建立对中国汉族成人颅骨CT片进行同一认定的方法。方法按照纳入标准收集100例中国汉族成人颅骨CT片，对确定的识别指标进行观察和测量，对各指标的观测结果进行分类编码，然后按观测顺序编制特异的12位颅骨CT片识别编码。运用SPSS13．0统计学软件对所得数据进行各指标年龄和性别差异的统计学分析，利用个人识别能力公式计算单个指标和总体指标的个人识别能力。结果12项识别指标中有6个指标存在男女性别差异；12项指标累计个人识别能力可达到99．9997997％。结论本文确定中国汉族成人颅骨CT片12项观测指标，利用指标分类编码法可进行中国汉族成人颅骨CT片的同一认定。     

头颅放射影像资料的同一认定

利用放射影像资料进行法医临床学鉴定案例越来越多。同一认定常使用的标志包括牙齿、头颅、脊柱等相关特征结构。头颅放射影像资料,包括X片及CT片中的额窦、乳突、蝶鞍、颅缝及其他结构均可作为同一认定的标志。目前,我国法医放射学尚属起步阶段,应加强此方面的研究。     

头颅CT片性别的识别

目的 通过头颅CT片研究性别识别的方法.方法 在头颅CT片测量头颅多项指标,应用各个指标进行二分类logistic回归分析建立性别判定方程. 结果应用颧弓间距指标可以建立一元方程:Z=-69.051 0.521X1,p=1/1 e-z.应用多项指标可以建立多元方程:Z=-115.873 0.585X1 0.119X4 0.254X7 0.229X8 0.101X6,P=1/1 e-z.结论 根据头颅CT片进行性别判定时,最好是测量多项指标.在指标不全时,就只需测量颧弓间距,也可以有较好的判别效果.     

耳廓的同一认定研究

目的研究耳廓观测指标的变化特征,提出利用耳廓特征识别点进行个体同一认定的研究方法,为法医学个体识别,及对视频图片中的个体进行同一认定,提供一种科学、准确、简便易行的方法。方法通过对19岁至22岁的汉族成人拍摄耳廓侧位图像,选取148人照片中的相应指标进行观测,数据收集,经SPSS统计软件处理,分析各种因素对测量结果的影响,计算出各指标识别能力及两批照片各指标之间的差值,最终得出各指标差值的参考值范围。结果 10项观测指标经统计检验分析,最终保留6项指标,重复测量结果稳定。各指标的变异系数相差不大,结果稳定可靠。结论通过制定6项观测指标差值的参考范围,确定指标是否同一,最终认定照片中耳廓是否属于同一个体的方法准确可行。     

X线头影侧位片同一认定指标的建立

目的探究口腔颌面X线头影侧位片的形态学分型,对识别指标进行数字编码,构建法医学同一认定体系。方法选取200例成年人口腔颌面的X线头影侧位片,通过SNA角、SNB角的相互关系及后面高与前面高比值,对颌面骨骼形态进行矢状向垂直向的综合分型,同时筛选出反映颌面特征的8个测量指标进行数字编码。结果依据矢状向、垂直向及8个测量指标构建的编码系统,其多样性较大,为99.5%。MP-FH和Y轴角的变异系数较大,同一认定价值较高。S-Ar-Go、Ar-Go-Me、MP-FH、1—-MP角、Y轴角、1—-SN角、1—-1—角各级别构成比间性别差异有统计学意义。结论利用头颅侧位片矢状向及垂直向分型并结合所选取的8项定量识别指标进行识别编码的方法,为法医同一认定提供了新思路。     

用于法医学同一认定的额窦CT编码

目的 使用头颅CT图像重建冠状位鼻骨切面研究额窦观测指标,以编制特异的识别编码.方法 通过距离数值量和形态学描述对额窦CT图像进行分析.额窦同一认定识别编码为:右侧额窦部分隔数,形态一额窦中间隔位置,形态一左侧额窦部分隔数,形态;右侧额窦上缘弓形弯曲数(右侧最高峰位置,最低峰位置)-左侧额窦上缘弓形弯曲数(左侧最高峰位...     

额窦数字X线影像分型与同一认定指标的筛选

目的 从法医学同一认定的视角探究柯氏位额窦计算机X线摄影(computer radiography,CR)的形态学分类,并结合识别指标的数字编码,构建X线影像同一认定体系.方法 收集 400例四川汉族成年人额窦标准柯氏位CR片.以两侧眼眶上缘均相切的直线与额窦的位置关系对额窦形态学特征进行分型研究,并对额窦识别指标进行数字编码.结果 提出额窦CR片影像学特征6类分型,筛选出额窦不对称性、最大额窦面积的侧别、同侧额窦面积与眼眶面积比、额窦上缘弓形弯曲数、额窦部分分隔位置、额窦中间隔位置等8项识别指标.结论 提出了先作分型鉴别,再用所选取的8项指标对额窦形态进行识别编码的柯氏位额窦CR片影像同一认定的新思路.     

Patterns of Courtroom Justice

Any one film can sustain a myriad of compelling intepretations. A collection of films, however, sharing formal and substantive qualities, reveals a common effect more than a diversity of meanings. This essay traces the shared formal and substantive qualities of a group of films, as I name them ‘trial films’. It documents this genre of film by identifying the genre’s norms of viewing and identification. It also investigates peculiar hybrid discourse of the trial film genre that combines both filmic and legal discursive practices to show how trial films cultivate support for the American system of law through its constitution of a specific viewing audience. In so doing, I broach the following questions: how do images of law in film help sustain the power and legitimacy of legal institutions? How does the study of film genres, like the courtroom drama, reveal the way law lives beyond its formal processes?     

Craniofacial identification by comparison of antemortem and postmortem radiographs: two case reports dealing with burnt bodies

Two cases of positive identification of burnt bodies by radiographic comparison are reported. They emphasize that antemortem radiographs of the head are an important but sometimes overlooked source of information which can frequently provide useful objective data for comparison purposes. A positive identification can easily be achieved by medical examiners through visual comparison of the antemortem with the postmortem cranial and facial structures, even of bodies severely damaged by fire. In these bodies the radiographs of the skull can graphically depict structures which are often unique to the individual, such as the frontal sinus pattern and the morphology of dental restorations. However, the process of identification through radiographs is appropriate only in burnt bodies in which antemortem radiographs of the alleged deceased are available for comparison and unique craniofacial structures are still present on the body in a well-preserved state or at least not completely destroyed by fire, depending on the extent of the burn injury. Matching of corresponding features seems preferable to other methods of personal identification such as skull-photo superimposition, morphometric analysis, and/or other computer-aided methods since these techniques need trained personnel, as well as expensive equipment which is not invariably available in the medical examiner's office or department of anthropology.     

Case Report of a Migrating Bullet: An Unusual Cause of Postmortem Confusion

Migrating bullets are rare sequelae of penetrating gunshot wounds. Such cases have been described in the neurosurgical literature because they can produce complications in the management of patients such as decline in neurologic status, delays in rehabilitation, and difficulties in bullet removal. In contrast, few postmortem reports have described this phenomenon. We report a case of a gunshot wound in which the projectile entered the left side of the head and traversed to the right frontal area as documented by CT scan on hospital admission. At autopsy, the bullet was noted to have migrated back to the left side of the head from where it was recovered. Medical examiners need to be aware of this unusual phenomenon of retained intracranial projectiles.     

A Validation Study of Bullet and Cartridge Case Comparisons Using Samples Representative of Actual Casework

The foundation of firearm and tool mark identification is that no two tools should produce the same microscopic marks on two separate objects that they would be inaccurately or wrongly identified. Studies addressing the validity of identification infrequently employ tests that mirror realistic casework scenarios. This study attempted to do so using a double‐blind process, reducing test‐taking bias. Test kits including bullets and cartridge cases but not the associated firearms were completed by 31 analysts from 22 agencies. Analysis of the results demonstrated an overall error rate of 0.303%, sensitivity of 85.2%, and specificity of 86.8%. Variability in performance across examiners is addressed, and the effect of examiners’ years of experience on identification accuracy is explored. Finally, the article discusses the importance of studies using realistic case work scenarios when validating the field's performance and in providing courts with usable indicators of the accuracy of firearm and tool mark identification.